Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Location”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Corrected Recursive Equations for Vane Aperture Sizes and Locations in One- and Two-Stage Stray Light Baffle Systems

Front-end stray light baffles for optical imaging systems are used to limit the amount of out-of-field light that reaches the entrance pupil of the optical system. From star tracker baffles to the outer barrel of the Hubble Space Telescope, it is vital to design the locations and apertures of baffle vanes so that the inner walls of the baffle are not simultaneously visible to both stray light sources and the optical entrance pupil. Various designs have been presented for arbitrary cylindrical baffle tubes and explicitly specified conical tubes, but no working generalized algorithm has been presented where the baffle tube can take an arbitrary conical form. Haghshenas and Johari presented what should be a working recursive algorithm, but the published equations have two errors that result in incorrect output. Corrections to their equations are presented here. Additionally, tolerancing in the field of baffle design has typically been accomplished by slightly increasing the fieldof-view of the baffle system to avoid clipping the optical field due to mechanical tolerance errors. A new way of incorporating fabrication, alignment, and environmental tolerancing is presented that is more consistent with typical mechanical engineering practice and margin against those fabrication errors is included in the recursive equations with demonstration of their benefit.

Stray light↗
NASA NTRS2024

Key Perseverance Sampling Locations for the Ancient Martian Crust and Implications for Mars Science

Since Feb 2021, the Perseverance rover has collected samples in the Jezero crater. The plan baselined at the 2018 landing site selection, subsequently further developed by the Mars-2020 team, and presented to the Decadal Survey included the exploration and sampling of the Jezero crater rim and the Nili Planum area, a rock record that is important to preserving the science return of the endeavor. Specifically, the science team identified the following prioritized science objectives aligned with community objectives that are not covered by the current sample cache: 1) Investigate the habitable environments with potential biosignatures from a more ancient time interval and from a diverse set of geological environments (incl. exposed subsurface) than the Jezero crater sedimentary deposits (Fig. 2). (2) Determine radioisotopic ages for well-defined craterretaining surfaces and/or the Isidis basin impact event. (3) Characterize ancient aqueous environments to study climate, environmental transitions, and habitability on ancient Mars. (4) Investigate planetary accretion, crustal evolution, and dynamo activity through analysis and sampling of igneous lithologies. (5) Study the geology of basin-forming impacts. In addition, for the Jezero rim and any Jezero ejecta: (6) Analyze Jezero impactites for potentially habitable hydrothermal environments and radioisotopic dating of the Jezero crater formation. From 2018 to now, we used a combination of High Resolution Imaging Experiment (HiRISE) and Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) data to further characterize Jezero rim and Nili Planum, culminating in our prioritized sample location recommendations: (1) Monument Valley and (2) Northwest Jezero rim.

Mars sample return↗
NASA NTRS2024

Sarasota Climate: Monitoring Heat and Assessing Heat Vulnerability to Identify Locations for Heat Mitigation Efforts in Sarasota, Florida

The coastal county of Sarasota, Florida, is located within the humid subtropical climate region and experiences an average of 250 days of sunshine every year. The county has large, urbanized communities which are vulnerable to urban heat island (UHI) effects. These rapidly growing communities contribute to the increasing surface temperatures and placing more residents at risk of heat-related illness. In partnership with Sarasota County Sustainability, the Sarasota Climate team utilized Earth observation data from NASA Landsat 8 and Landsat 9’s Thermal Infrared Sensors (TIRS), and the International Space Station’s Ecosystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) to model UHI effects within the county during the Summer for the last five years, 2019 to 2023. Data analysis with the Integrated Valuation of Ecosystem Services and Tradeoffs (InVEST) and Urban Heat Exposure Assessment Tempe 1.0 (UHEAT 1.0) models and within ModelBuilder produced maps that identified the land surface temperature (LST) variance within the county, the regions that are most susceptible to extreme heat, and areas least capable of mitigating the effects of UHI. The results revealed that heat intensity varies significantly across Sarasota County with the highest temperatures in the more developed western part of the county. Additionally, the team identified that there are at least three vulnerable communities that exist in high-heat regions, including North Sarasota, Venice, and North Port. These regions have an overlap between socioeconomic sensitivity and environmental hazard that indicate a high priority in future heat mitigation efforts.

Remote sensing↗
NASA NTRS2024

Interim Measure Report, U.S. Fish and Wildlife/National Park Support Buildings and Areas, Potential Release Location (PRL) #228

This report documents the Interim Measure completed at U.S. Fish and Wildlife/National Park Support Buildings and Areas, Potential Release Location (PRL) #228, at Kennedy Space Center, Florida. This document has been prepared for the National Aeronautics and Space Administration (NASA), in accordance with HydroGeoLogic, Inc.’s (HGL) Contract 80KSC019D0012, Task Order 80KSC019F0224.

U.S. Fish and Wildlife/National Park Support Build↗
NASA NTRS2024

KSC Child Development Center (Potential Release Location 149) Confirmatory Sampling Report and Interim Measures Work Plan

This Confirmatory Sampling (CS) Report and Interim Measures (IM) Work Plan was prepared for the National Aeronautics and Space Administration (NASA), Kennedy Space Center (KSC), Florida, by HydroGeoLogic, Inc. (HGL) under Contract Number 80KSC019D0012, Task Order 80KSC019F0118. This document presents the results of the CS activities performed in March 2022, and May 202, at the KSC Child Development Center (KCDC), Potential Release Location (PRL) 149, KSC, Florida. This report additionally presents the results of an assessment conducted in July 2023 to determine whether construction activities in 2023 to replace certain playground equipment and the rubberized play surface allowed soil contaminated by arsenic (As) to migrate from beneath the play surface.

arsenic↗
NASA NTRSDate not supplied

Monitoring and Assessing Heat Vulnerability to Identify Locations for Heat Mitigation Efforts in Sarasota, Florida

Located in the coastal subtropical region, Florida’s Sarasota County receives plenty of sunlight for more than half of the year. However, the ongoing rise in summer temperatures attributed to climate change poses an increasing vulnerability to extreme heat for the residents. Moreover, the area's high relative humidity exacerbates the discomfort of high temperatures, thereby intensifying the severity of heat events and elevating the risks of heat-related illnesses. Our collaborations with Sarasota County Sustainability underscore shared concerns about the impact of urban heat island (UHI) on the community. We utilized Earth observation data from NASA Landsat 8 and Landsat 9’s Thermal Infrared Sensors (TIRS) and the International Space Station’s Ecosystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) to model UHI effects within the county during the summer from 2019 to 2023. By implementing the open-source Integrated Valuation of Ecosystem Services and Tradeoffs (InVEST) Urban Cooling software model, ArcGIS ModelBuilder, and principal component analysis, we identified the land surface temperature variance within the county and areas that are least capable of mitigating the effects of UHI. In addition, we use socioeconomic and demographic data as indicators to quantify vulnerability at the census tract level. The results revealed that heat intensity varies significantly across Sarasota County, with the highest temperatures being in the more developed western part of the region. We pinpointed that at least three vulnerable communities reside in high-heat regions: North Sarasota, Venice, and North Port. These areas demonstrate a confluence between socioeconomic sensitivity and environmental hazard, indicating a high priority in future heat mitigation efforts.

Theresia Phoa↗
NASA NTRSDate not supplied

Determining Optimal Asset Location for Rapid and Efficient Wildfire Suppression: A Simulation-Based Approach

The impact of wildfire incidents has been growing in recent years, posing a serious threat to communities at the urban-wildland interface. To address this problem, there have been growing calls to use UAVs to increase the capacity of responsible agencies to quickly and effectively suppress fires and to reduce risks associated with firefighting. One of the opportunities associated with UAVs is the ability to rapidly and autonomously operate from limited-access air bases where fires are expected to burn. This study provides an approach to determine where these air bases should be placed in order to most rapidly extinguish fires, given provided fuel distributions. This approach uses an integrated simulation of fire propagation and UAV-based suppression actions to determine how much of a given environment was burned over a range of scenarios. It then uses an optimization method to explore the space and determine the location with the least burned area. Results show the approach to efficiently and effectively provide optimal bases for single-base placements over a range of scenarios, though future work is required to adequately calibrate the model and study how it can be used in multiple-base placement problems.

Daniel Hulse↗
NASA NTRSDate not supplied

Determining Optimal Asset Location for Rapid and Efficient Wildfire Suppression: A Simulation-Based Approach

The impact of wildfire incidents has been growing in recent years, posing a serious threat to communities at the urban-wildland interface. To address this problem, there have been growing calls to use UAVs to increase the capacity of responsible agencies to quickly and effectively suppress fires and to reduce risks associated with firefighting. One of the opportunities associated with UAVs is the ability to rapidly and autonomously operate from limited-access air bases where fires are expected to burn. This study provides an approach to determine where these air bases should be placed in order to most rapidly extinguish fires, given provided fuel distributions. This approach uses an integrated simulation of fire propagation and UAV-based suppression actions to determine how much of a given environment was burned over a range of scenarios. It then uses an optimization method to explore the space and determine the location with the least burned area. Results show the approach to efficiently and effectively provide optimal bases for single-base placements over a range of scenarios, though future work is required to adequately calibrate the model and study how it can be used in multiple-base placement problems.

Daniel Hulse↗
DOE OSTI2020

Electrically conductive proppant and methods for detecting, locating and characterizing the electrically conductive proppant

Electrically conductive proppants and methods for detecting, locating, and characterizing same are provided. The electrically conductive proppant can include a substantially uniform coating of an electrically conductive material having a thickness of at least 500 nm. The method can include injecting a hydraulic fluid into a wellbore extending into a subterranean formation at a rate and pressure sufficient to open a fracture therein, injecting into the fracture a fluid containing the electrically conductive proppant, electrically energizing the earth at or near the fracture, and measuring three dimensional (x, y, and z) components of electric and magnetic field responses at a surface of the earth or in an adjacent wellbore.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Locating node of named data elements in coordination namespace

An approach is disclosed that locates a named data element by a local node. A name corresponding to the named data element is received, the named data element exists in a Coordination Namespace allocated in a memory area that is distributed amongst a set of nodes that include the local node and remote nodes. A predicted node identifier is received and then the named data element is requested from the predicted node based on the predicted node identifier.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Transforming Energy through Computational Excellence. Exascale Computing: Combustion; Simulating Effects of Fuel Injection Location in Supersonic Jet Engines

Computational tractable simulations using an adaptive-mesh-refinement solverfor compressible reacting flows help researchers understand how variations in fuel injection location within the supersonic flow cavity impacts combustion efficiency. By identifying the important physical determinants of the combustion processes, this study shows a promising pathway to improving flame stability and combustion efficiency, as well as reducing emissions.

adaptive mesh refinement↗
DOE OSTI2021

Electrically conductive proppant and methods for detecting, locating and characterizing the electrically conductive proppant

Electrically conductive proppants and methods for detecting, locating, and characterizing same are provided. The electrically conductive proppant can include a substantially uniform coating of an electrically conductive material having a thickness of at least 500 nm. The method can include injecting a hydraulic fluid into a wellbore extending into a subterranean formation at a rate and pressure sufficient to open a fracture therein, injecting into the fracture a fluid containing the electrically conductive proppant, electrically energizing the earth at or near the fracture, and measuring three dimensional (x, y, and z) components of electric and magnetic field responses at a surface of the earth or in an adjacent wellbore.

Cannan, Chad↗
DOE OSTI2022

An Acoustic Transmitter with Intelligent ON/OFF Mechanisms and Quasi-location Awareness

We successfully demonstrated an acoustic transmitter with intelligent ON/OFF mechanisms and quasi-location awareness. The prototype transmitter has (1) the ability (radio frequency-enabled ON/OFF) to turn the tag on and off when it passes through a passive integrated transponder antenna and (2) the ability to detect significant salinity changes (i.e. from freshwater to sea water and vice versa) and turn itself off and on, respectively. Such a device would greatly enhance the capabilities of the acoustic telemetry-based fish tracking systems.

Deng, Zhiqun↗
DOE OSTI2024

Downscaling Synthetic Populations to Realistic Residential Locations

High-fidelity pattern of life (PoL) models require realistic origin points for predictive trip modeling. This paper develops and demonstrates a reproducible method using open data to match synthetic populations generated from census surveys to plausible residential locations (building footprints) based on housing attributes. This approach presents promise over extant methods based on housing density, particularly in small neighborhood areas with heterogeneous land-use.

Tuccillo, Joe↗
DOE OSTI2023

Charging location selection of an incoming electric vehicle for large EV depot infrastructure

As the use of renewable energy resources increases within charging infrastructures, the risk that charging an additional load within the charging infrastructure will create a violation of the applicable grid code also increases. In an embodiment, a charging location is selected for an incoming load based on a load flow analysis, to thereby mitigate the risk of a violation. This selection process may also account for the charging schedule of the load and the capacity of available charging stations (e.g., fast charging vs. slow charging).

Hafiz, Faeza↗