Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Linearization error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Prediction of error rates in dose-imprinted memories on board CRRES by two different methods

An analysis of the expected space radiation effects on the single event upset (SEU) properties of CMOS/bulk memories onboard the Combined Release and Radiation Effects Satellite (CRRES) is presented. Dose-imprint data from ground test irradiations of identical devices are applied to the predictions of cosmic-ray-induced space upset rates in the memories onboard the spacecraft. The calculations take into account the effect of total dose on the SEU sensitivity of the devices as the dose accumulates in orbit. Estimates of error rates, which involved an arbitrary selection of a single pair of threshold linear energy transfer (LET) and asymptotic cross-section values, were compared to the results of an integration over the cross-section curves versus LET. The integration gave lower upset rates than the use of the selected values of the SEU parameters. Since the integration approach is more accurate and eliminates the need for an arbitrary definition of threshold LET and asymptotic cross section, it is recommended for all error rate predictions where experimental sigma-versus-LET curves are available.

Brucker, G. J.↗

Verifiable Adaptive Control with Analytical Stability Margins by Optimal Control Modification

This paper presents a verifiable model-reference adaptive control method based on an optimal control formulation for linear uncertain systems. A predictor model is formulated to enable a parameter estimation of the system parametric uncertainty. The adaptation is based on both the tracking error and predictor error. Using a singular perturbation argument, it can be shown that the closed-loop system tends to a linear time invariant model asymptotically under an assumption of fast adaptation. A stability margin analysis is given to estimate a lower bound of the time delay margin using a matrix measure method. Using this analytical method, the free design parameter n of the optimal control modification adaptive law can be determined to meet a specification of stability margin for verification purposes.

Nguyen, Nhan T.↗

On the Retrieval of Lightning Radio Sources from Time-of-Arrival Data

We examine the problem of retrieving three-dimensional lightning locations from radio frequency Time-Of-Arrival (TOA) measurements. Arbitrary antenna locations are considered. By judiciously differencing measurements that are related to the location of the antennas and their excitation times, the problem is converted from the initial spherical nonlinear form to a system of linear equations. In the linear formalism, the source location and time-of-occurrence is viewed geometrically as an intersection of hyperplanes in the four-dimensional Minkowski space (x,y,z,t). The linear equations are solved to obtain explicit analytic expressions for the location and time variables. Retrieval errors are not interpreted with conventional Geometrical Dilution of Precision (GDOP) arguments as discussed by Holmes and Reedy (1951), but with more recent inversion analyses considered by Twomey (1977). Measurement errors are propagated analytically so that the specific effect of these errors on the solution is clarified. The sensitivity of the solution on the number of antennas used, antenna network geometry, source position, and measurement differencing schemes are discussed in terms of the eigenvalues of the linear system.

Koshak, William J.↗

Effects of in-situ and reanalysis climate data on estimation of cropland gross primary production using the Vegetation Photosynthesis Model

Satellite-based Production Efficiency Models (PEMs) often require meteorological reanalysis data such as the North America Regional Reanalysis (NARR) by the National Centers for Environmental Prediction (NCEP) as model inputs to simulate Gross Primary Production (GPP) at regional and global scales. This study first evaluated the accuracies of air temperature (TNARR) and downward shortwave radiation (RNARR) of the NARR by comparing with in-situ meteorological measurements at 37 AmeriFlux non-crop eddy flux sites, then used one PEM – the Vegetation Photosynthesis Model (VPM) to simulate 8-day mean GPP (GPPVPM) at seven AmeriFlux crop sites, and investigated the uncertainties in GPPVPM from climate inputs as compared with eddy covariance-based GPP (GPPEC). Results showed that TNARR agreed well with in-situ measurements; RNARR, however, was positively biased. An empirical linear correction was applied to RNARR, and significantly reduced the relative error of RNARR by ~25% for crop site-years. Overall, GPPVPM calculated from the in-situ (GPPVPM(EC)), original (GPPVPM(NARR)) and adjusted NARR (GPPVPM(adjNARR)) climate data tracked the seasonality of GPPEC well, albeit with different degrees of biases. GPPVPM(EC) showed a good match with GPPEC for maize (Zea mays L.), but was slightly underestimated for soybean (Glycine max L.). Replacing the in-situ climate data with the NARR resulted in a significant overestimation of GPPVPM(NARR) (18.4/29.6% for irrigated/rainfed maize and 12.7/12.5% for irrigated/rainfed soybean). GPPVPM(adjNARR) showed a good agreement with GPPVPM(EC) for both crops due to the reduction in the bias of RNARR. The results imply that the bias of RNARR introduced significant uncertainties into the PEM-based GPP estimates, suggesting that more accurate surface radiation datasets are needed to estimate primary production of terrestrial ecosystems at regional and global scales.

AmeriFlux↗

Stabilization of numerical interchange in spectral-element magnetohydrodynamics

In this study, auxiliary numerical projections of the divergence of flow velocity and vorticity parallel to magnetic field are developed and tested for the purpose of suppressing unphysical interchange instability in magnetohydrodynamic simulations. The numerical instability arises with equal-order C 0 finite- and spectral-element expansions of the flow velocity, magnetic field, and pressure and is sensitive to behavior at the limit of resolution. The auxiliary projections are motivated by physical field-line bending, and coercive responses to the projections are added to the flow-velocity equation. Their incomplete expansions are limited to the highest-order orthogonal polynomial in at least one coordinate of the spectral elements. Cylindrical eigenmode computations show that the projections induce convergence from the stable side with first-order ideal-MHD equations during h-refinement and p-refinement. Hyperbolic and parabolic projections and responses are compared, together with different methods for avoiding magnetic divergence error. Lastly, the projections are also shown to be effective in linear and nonlinear time-dependent computations with the NIMROD code [C. R. Sovinec, et al., J. Comput. Phys. 195 (2004) 355-386], provided that the projections introduce numerical dissipation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spectral methods in the presence of discontinuities

Spectral methods provide an elegant and efficient way of numerically solving differential equations of all kinds. For smooth problems, truncation error for spectral methods vanishes exponentially in the infinity norm and L 2 -norm. However, for non-smooth problems, convergence is significantly worse—the L 2 -norm of the error for a discontinuous problem will converge at a sub-linear rate and the infinity norm will not converge at all. We explore and improve upon a post-processing technique—optimally convergent mollifiers—to recover exponential convergence from a poorly-converging spectral reconstruction of non-smooth data. Furthermore this is an important first step towards using these techniques for simulations of realistic systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sooting tendencies of co-optima test gasolines and their surrogates

Here, this study characterized the sooting tendencies of a set of gasolines and their surrogates using both experimental and computational methods. Sooting tendency was defined in terms of the soot yield when 1000 ppm of the test fuel is doped into the fuel of a methane/air flame, and it provides a measure of the intrinsic chemical tendency of the fuels to form soot in a generic combustion environment. The test fuels were real gasolines containing enhanced concentrations of alkanes, aromatics, cycloalkanes, olefins, and ethanol. These compositional differences caused the experimentally measured sooting tendencies of the fuels to vary by 240%. The surrogates were 3 mixtures defined by Szybist et al. (2017) and 3 alternative formulations modified for greater experimental convenience. The sooting tendencies measured for the surrogate mixtures agreed with the real fuels to within 15%, and varied with composition in the same order. The sooting tendencies of the surrogates could be predicted to within experimental error with an empirical quantitative structure-property relationship and a linear mixing model. The experimental flames were computationally simulated with a 743-species mechanism, and sooting tendencies derived from the results agreed with the measured values to within 11%. Altogether, these results show that the sooting behavior of gasoline can vary considerably within the range of acceptable compositions, and that these variations can be accurately predicted with empirical models and computational simulations.

09 BIOMASS FUELS↗

Kinetic modelling for zinc (II) ions biosorption onto Luffa cylindrica

The biosorption of Zinc (II) ions onto a biomaterial - Luffa cylindrica has been studied. This biomaterial was characterized by elemental analysis, surface area, pore size distribution, scanning electron microscopy, and the biomaterial before and after sorption, was characterized by Fourier Transform Infra Red (FTIR) spectrometer. The kinetic nonlinear models fitted were Pseudo-first order, Pseudo-second order and Intra-particle diffusion. A comparison of non-linear regression method in selecting the kinetic model was made. Four error functions, namely coefficient of determination (R{sup 2}), hybrid fractional error function (HYBRID), average relative error (ARE), and sum of the errors squared (ERRSQ), were used to predict the parameters of the kinetic models. The strength of this study is that a biomaterial with wide distribution particularly in the tropical world and which occurs as waste material could be put into effective utilization as a biosorbent to address a crucial environmental problem.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Vibrational spectroscopy via the Caldeira-Leggett model with anharmonic system potentials

The Caldeira-Leggett (CL) model, which describes a system bi-linearly coupled to a harmonic bath, has enjoyed popularity in condensed phase spectroscopy owing to its utmost simplicity. However, the applicability of the model to cases with anharmonic system potentials, as it is required for the description of realistic systems in solution, is questionable due to the presence of the invertibility problem [F. Gottwald et al., J. Phys. Chem. Lett. 6, 2722 (2015)] unless the system itself resembles the CL model form. This might well be the case at surfaces or in the solid regime, which we here confirm for a particular example of an iodine molecule in the atomic argon environment under high pressure. For this purpose we extend the recently proposed Fourier method for parameterizing linear generalized Langevin dynamics [F. Gottwald et al., J. Chem. Phys. 142, 244110 (2015)] to the non-linear case based on the CL model and perform an extensive error analysis. In order to judge on the applicability of this model in advance, we give practical empirical criteria and discuss the effect of the potential renormalization term. The obtained results provide evidence that the CL model can be used for describing a potentially broad class of systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gradient-based stochastic estimation of the density matrix

Fast estimation of the single-particle density matrix is key to many applications in quantum chemistry and condensed matter physics. The best numerical methods leverage the fact that the density matrix elements f(H) ij decay rapidly with distance rij between orbitals. This decay is usually exponential. However, for the special case of metals at zero temperature, algebraic decay of the density matrix appears and poses a significant numerical challenge. Here, we introduce a gradient-based probing method to estimate all local density matrix elements at a computational cost that scales linearly with system size. For zero-temperature metals, the stochastic error scales like S -(d+2)/2d , where d is the dimension and S is a prefactor to the computational cost. The convergence becomes exponential if the system is at finite temperature or is insulating.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling L 2,3 -edge X-ray absorption spectroscopy with linear response exact two-component relativistic time-dependent density functional theory

X-ray absorption spectroscopy (XAS) is a powerful tool that can provide physical insights into element-specific chemical processes and reactivities. Although relativistic time-dependent density functional theory (TDDFT) has been previously applied to model the L-edge region in XAS, there has not been a more comprehensive study of the choices of basis sets and density functional kernels available for variational relativistic excited state methods. In this work, we introduce the implementation of the generalized preconditioned locally harmonic residual algorithm to solve the complex-valued relativistic TDDFT for modeling the L-edge X-ray absorption spectra. Further, we investigate the L 2,3 -edge spectra of a series of molecular complexes using relativistic linear response TDDFT with a hybrid iterative diagonalization algorithm. A systematic error analysis was carried out with a focus on the energetics, intensities, and magnitude of L 2 –L 3 splitting compared to experiments. Additionally, the results from relativistic TDDFT calculations are compared to those computed using other theoretical methods, and the multideterminantal effects on the L-edge XAS were investigated.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Ab Initio Quantum Monte Carlo Simulation of the Warm Dense Electron Gas in the Thermodynamic Limit

Here we perform ab initio quantum Monte Carlo (QMC) simulations of the warm dense uniform electron gas in the thermodynamic limit. By combining QMC data with the linear response theory, we are able to remove finite-size errors from the potential energy over the substantial parts of the warm dense regime, overcoming the deficiencies of the existing finite-size corrections by Brown et al. [Phys. Rev. Lett. 110, 146405 (2013)]. Extensive new QMC results for up to N = 1000 electrons enable us to compute the potential energy V and the exchange-correlation free energy F xc of the macroscopic electron gas with an unprecedented accuracy of | Δ V | / | V | , | Δ F xc | / | F | xc ~ 10 $-$3 . Finally, a comparison of our new data to the recent parametrization of F xc by Karasiev et al. [Phys. Rev. Lett. 112, 076403 (2014)] reveals significant deviations to the latter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

CERN Large hadron collider optics model, measurements, and corrections

Optics stability during all phases of operation is crucial for the LHC. Tools and procedures have been developed for rapid checks of beta beating, dispersion, and linear coupling, as well as for prompt optics corrections. Important optics errors during the different phases of the beam commissioning were observed and locally corrected using the segment-by-segment technique. The most relevant corrections at injection have been corroborated with dedicated magnetic measurements.

43 PARTICLE ACCELERATORS↗

A Statistical Interpolation Code for Ocean Analysis and Forecasting

Abstract We present a data assimilation package for use with ocean circulation models in analysis, forecasting, and system evaluation applications. The basic functionality of the package is centered on a multivariate linear statistical estimation for a given predicted/background ocean state, observations, and error statistics. Novel features of the package include support for multiple covariance models, and the solution of the least squares normal equations either using the covariance matrix or its inverse—the information matrix. The main focus of this paper, however, is on the solution of the analysis equations using the information matrix, which offers several advantages for solving large problems efficiently. Details of the parameterization of the inverse covariance using Markov random fields are provided and its relationship to finite-difference discretizations of diffusion equations are pointed out. The package can assimilate a variety of observation types from both remote sensing and in situ platforms. The performance of the data assimilation methodology implemented in the package is demonstrated with a yearlong global ocean hindcast with a 1/4° ocean model. The code is implemented in modern Fortran, supports distributed memory, shared memory, multicore architectures, and uses climate and forecasts compliant Network Common Data Form for input/output. The package is freely available with an open source license from www.tendral.com/tsis/ .

Srinivasan, Ashwanth↗

Sensitivity aspects of linear digital control systems.

Linear computer-controlled closed loop systems sensitivity analysis, deriving estimation error incremental covariance to demonstrate quality deterioration under perturbed initial conditions, parameters, etc

Christie, L. A.↗