Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Level Set”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Boundary-Layer-Ingesting Inlet Flow Control

An experimental study was conducted to provide the first demonstration of an active flow control system for a flush-mounted inlet with significant boundary-layer-ingestion in transonic flow conditions. The effectiveness of the flow control in reducing the circumferential distortion at the engine fan-face location was assessed using a 2.5%-scale model of a boundary-layer-ingesting offset diffusing inlet. The inlet was flush mounted to the tunnel wall and ingested a large boundary layer with a boundary-layer-to-inlet height ratio of 35%. Different jet distribution patterns and jet mass flow rates were used in the inlet to control distortion. A vane configuration was also tested. Finally a hybrid vane/jet configuration was tested leveraging strengths of both types of devices. Measurements were made of the onset boundary layer, the duct surface static pressures, and the mass flow rates through the duct and the flow control actuators. The distortion and pressure recovery were measured at the aerodynamic interface plane. The data show that control jets and vanes reduce circumferential distortion to acceptable levels. The point-design vane configuration produced higher distortion levels at off-design settings. The hybrid vane/jet flow control configuration reduced the off-design distortion levels to acceptable ones and used less than 0.5% of the inlet mass flow to supply the jets.

Owens, Lewis R.↗

Glass Property-Composition Models Update for use in Direct Feed High-Level Waste Flowsheet Development: EWG2.6

A set of preliminary glass property models and constraints were developed and augmented by models from literature for use in design of direct-feed high-level waste (DFHLW) glasses for flowsheet evaluation, testing, and design of the Waste Treatment and Immobilization Plant (WTP) high-level waste (HLW) Facility. These models and constraints are meant to be used as a place-holder while glass property-composition data gaps are filled and final plant operating models are developed. This report describes the motivation and intended use of the models, the compilation of data, model fitting and selection, methods to apply the models and constraints in glass design and offers example calculations demonstrating their intended use.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Search for Pair Production of First-Generation Scalar Leptoquarks in pp Collisions at {radical}(s)=7 TeV

A search for pair production of first-generation scalar leptoquarks is performed in the final state containing two electrons and two jets using proton-proton collision data at {radical}(s)=7 TeV. The data sample used corresponds to an integrated luminosity of 33 pb{sup -1} collected with the CMS detector at the CERN LHC. The number of observed events is in good agreement with the predictions for the standard model background processes, and an upper limit is set on the leptoquark pair production cross section times {beta}{sup 2} as a function of the leptoquark mass, where {beta} is the branching fraction of the leptoquark decay to an electron and a quark. A 95% confidence level lower limit is set on the mass of a first-generation scalar leptoquark at 384 GeV for {beta}=1, which is the most stringent direct limit to date.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for a W' boson decaying to a vector-like quark and a top or bottom quark in the all-jets final state at $\sqrt{\mathrm{s}}$ = 13 TeV

A search is presented for a heavy W' boson resonance decaying to a B or T vector-like quark and a t or a b quark, respectively. The analysis is performed using proton-proton collisions collected with the CMS detector at the LHC. The data correspond to an integrated luminosity of 138 fb -1 at a center-of-mass energy of 13 TeV. Both decay channels result in a signature with a t quark, a Higgs or Z boson, and a b quark, each produced with a significant Lorentz boost. The all-hadronic decays of the Higgs or Z boson and of the t quark are selected using jet substructure techniques to reduce standard model backgrounds, resulting in a distinct three-jet W' boson decay signature. No significant deviation in data with respect to the standard model background prediction is observed. Upper limits are set at 95% confidence level on the product of the W' boson cross section and the final state branching fraction. A W' boson with a mass below 3.1 TeV is excluded, given the benchmark model assumption of democratic branching fractions. In addition, limits are set based on generalizations of these assumptions. These are the most sensitive limits to date for this final state.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Activities of the NASA Urban Air Mobility Noise Working Group (UNWG)

The NASA-led Urban Air Mobility Noise Working Group was established in 2018 following an exploratory meeting of stakeholders from traditional and emerging aviation sectors across industry, government agencies, academia, and community groups. Its mission is to create and support a diverse community of acoustics experts to identify, discuss, and address noise issues associated with UAM vehicles and their operations. The UNWG is comprised of four subgroups including Tools and Technologies, Ground and Flight Testing, Human Response and Metrics, and Regulation and Policy. In 2020, NASA published the white paper entitled “Urban Air Mobility Noise: Current Practice, Gaps, and Recommendations,” that presents a set of high-level goals and makes recommendations to address gaps in the current practice. This presentation is about recent activities of each of the subgroups to address those recommendations, including work towards establishment of an aeroacoustic test database for model validation, development of a set of measurement guidelines to quantify vehicle acoustic emission, a remotely administered human response study for quantifying annoyance to UAM operations, and status on noise standard, regulation, policy, and community engagement developments.

Urban air mobility↗

PV Reliability Lessons from 100,000 Systems

Despite the importance of reliability to the cost competitiveness of PV, large data sets enabling high-level investigation of the technology’s performance in the field are relatively scarce. Dirk C. Jordan, Chris Deline, Bill Marion and Teresa Barnes of the National Renewable Energy Laboratory, and Mark Bolinger of the Lawrence Berkeley National Laboratory study a unique data set of 100,000 PV systems in the US, drawing out tips for better reliability that have relevance to other parts of the world.

41 EE - Solar Energy Technologies Office (EE-4S)↗

Ab initio structural and spectroscopic study of HPS{sup x} and HSP{sup x} (x = 0,+1,−1) in the gas phase

Accurate ab initio computations of structural and spectroscopic parameters for the HPS/HSP molecules and corresponding cations and anions have been performed. For the electronic structure computations, standard and explicitly correlated coupled cluster techniques in conjunction with large basis sets have been adopted. In particular, we present equilibrium geometries, rotational constants, harmonic vibrational frequencies, adiabatic ionization energies, electron affinities, and, for the neutral species, singlet-triplet relative energies. Besides, the full-dimensional potential energy surfaces (PESs) for HPS{sup x} and HSP{sup x} (x = −1,0,1) systems have been generated at the standard coupled cluster level with a basis set of augmented quintuple-zeta quality. By applying perturbation theory to the calculated PESs, an extended set of spectroscopic constants, including τ, first-order centrifugal distortion and anharmonic vibrational constants has been obtained. In addition, the potentials have been used in a variational approach to deduce the whole pattern of vibrational levels up to 4000 cm{sup −1} above the minima of the corresponding PESs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical kinetics predictions for NH 2 + HO 2

Recent modeling studies of NH 3 oxidation, which are motivated by the prospective role of ammonia as a zero-carbon fuel, have indicated significant discrepancies between existing literature mechanisms. In this study high level theoretical kinetics predictions have been obtained for the reaction of NH 2 with HO 2 , which has previously been highlighted as an important reaction with high sensitivity and high uncertainty. The potential energy surface is explored with coupled cluster calculations including large basis sets and high-level corrections to yield high accuracy (~0.2 kcal/mol) estimates of the stationary point energies. Variational transition state theory is used to predict the microcanonical rate constants, which are then incorporated in master equation treatments of the temperature and pressure dependent kinetics. For the radical-radical channels, the microcanonical rates are obtained from variable reaction coordinate transition state theory implementing directly evaluated multireference electronic energies. The analysis yields predictions for the total rate constant as well as the branching to the NH 3 + O 2 , H 2 NO + OH, and HNO + H 2 O channels. Rate constants are also reported for the H 2 NO + OH reaction as they arise naturally from the analysis. The rate constant and branching fraction determined in this work for the NH 2 + HO 2 reaction deviate significantly from values used in most previous modeling studies. The fact that the main product channel is chain terminating, rather than propagating, has strong implications for modeling NH 3 ignition and oxidation, in particular at intermediate temperatures and elevated pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Search for a Higgs-like boson decaying to two photons in $p\bar{p}$ collisions at $\sqrt{s} = 1.96$ TeV

We present a search for the Standard Model (SM) Higgs boson decaying to two photons using the 9.6 fb -1 of p$\bar{p}$ collisions at √s = 1.96 TeV collected by the D0 detector at the Tevatron from July 2002 to September 2011. The data corresponds to the complete data-set in the RunII period of the Tevatron. This thesis employs a multivariate technique, boosted decision trees, to optimize the discrimination of signal from background. No significant excess of data above theoretical prediction is observed, so limits on the ratio of the production cross section times the branching ratio to the SM value are set at 95% confidence level as a function of hypothetical Higgs boson mass. The expected and observed limits on this ratio are 8.7 and 12.8 respectively at 125 GeV. We also interpret the data in the fermiophobic Higgs model. The result has reached a sensitivity of 114 GeV, and we set a lower limit on the fermiophobic Higgs mass of M Hf > 113 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Anisotropy of the diffuse background at millimeter wavelengths

The anisotropy of the diffuse background radiation has been measured with a 10-deg FWHM beam in a broad spectral band from 0.6 to 4.0 mm. A dipole anisotropy is detected with magnitude consistent with previous measurements; the present data may, however, be contaminated by atmospheric emission. Upper limits are set to fluctuations at higher-order multipoles. The most stringent limit is at l = 4, where a 95-percent confidence-level limit of less than 0.00025 is set. The observed level of isotropy sharply constrains the possibility of local astronomical origin for the submillimeter excess.

Bernstein, G. M.↗

Simultaneous electromagnetically induced transparency for two circularly polarized lasers coupled to the same linearly polarized laser in a four-level atomic system in the W scheme

Electromagnetic induced transparency (EIT) can be produced in a four-level atomic system in the W scheme using a linearly polarized optical field for simultaneously slowing down two {sigma}{sup +} and {sigma}{sup -} circularly polarized optical fields. This four-level atomic system can be set up with a |{sup 1}S{sub 0}> ground state and three Zeeman levels of the |{sup 1}P{sub 1}> excited state of any alkali-metal atom placed in a weak magnetic field. We apply our W scheme to ultracold magnesium atoms for neglecting the collisional dephasing. Atomic coherences are reported after solving a density matrix master equation including radiative relaxations from Zeeman states of the |{sup 1}P{sub 1}> multiplet to the |{sup 1}S{sub 0}> ground state. The EIT feature is analyzed using the transit time between the normal dispersive region and the EIT region. The evolution of the EIT feature with the variation of the coupling field is discussed using an intuitive dressed-state representation. We analyze the sensitivity of an EIT feature to pressure broadening of the excited Zeeman states.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

SU-E-E-11: Novel Matching Module for Respiration-Gated Motion Tumor of Cone-Beam Computed Tomography (CBCT) to 4DCT

Purpose: Four dimensional computed tomography (4DCT) scans reliably record whole respiratory phase and generate internal target volumes (ITV) for radiotherapy planning. However, image guiding with cone-beam computed tomography (CBCT) cannot acquire all or specific respiratory phases. This study was designed to investigate the correlation between average CT and Maximum Intensity Projection (MIP) from 4DCT and CBCT. Methods: Retrospective respiratory gating were performed by GE Discovery CT590 RT. 4DCT and CBCT data from CRIS Dynamic Thorax Phantom with simulated breathing mode were analyzed. The lung tissue equivalent material encompassed 3 cm sphere tissue equivalent material. Simulated breathing cycle period was set as 4 seconds, 5 seconds and 6 seconds for representing variation of patient breathing cycle time, and the sphere material moved toward inferior and superior direction with 1 cm amplitude simulating lung tumor motion during respiration. Results: Under lung window, the volume ratio of CBCT scans to ITVs derived from 10 phases average scans was 1.00 ± 0.02, and 1.03 ± 0.03 for ratio of CBCT scans to MIP scans. Under abdomen window, the ratio of CBCT scans to ITVs derived from 10 phases average scans was 0.39 ± 0.06, and 0.06 ± 0.00 for ratio of CBCT scans to MIP scans. There was a significant difference between lung window Result and abdomen window Result. For reducing image guiding uncertainty, CBCT window was set with width 500 and level-250. The ratio of CBCT scans to ITVs derived from 4 phases average scans with abdomen window was 1.19 ± 0.02, and 1.06 ± 0.01 for ratio of CBCT to MIP scans. Conclusion: CBCT images with suitable window width and level can efficiently reduce image guiding uncertainty for patient with mobile tumor. By our setting, we can match motion tumor to gating tumor location on planning CT more accurately neglecting other motion artifacts during CBCT scans.

60 APPLIED LIFE SCIENCES↗

A Full-Stack Exploration of Language-Based Parallelism in Fortran 2023

This poster explores native parallel features in Fortran 2023 through the lens of supporting applications with libraries, compilers, and parallel runtimes. The language revision informally named Fortran 2008 introduced parallelism in the form of Single Program Multiple Data (SPMD) execution with two broad feature sets: (1) loop-level parallelism via do concurrent and (2) a Partitioned Global Address Space (PGAS) comprised of distributed “coarray” data structures. Fortran’s native parallelism has demonstrated high performance [1] and reduced the burden of inserting what sometimes amounts to more directives than code. Several compilers support both feature sets, typically by translating do concurrent into serial do loops annotated by parallel directives and by translating SPMD/PGAS features into direct calls to a communication library. Our research focuses primarily on two questions: (1) can the compiler’s parallel runtime library be developed in the language being compiled (Fortran) and (2) can we define an interface to the runtime that liberates compilers from being hardwired to one runtime and vice versa. We are answering these questions by developing the Parallel Runtime Interface for Fortran (PRIF) [2] and the Co-Array Fortran Framework of Efficient Interfaces to Network Environments (Caffeine) [3]. Caffeine is initially targeting adoption by LLVM Flang, a new open-source Fortran compiler developed by a broad community in industry, academia, and government labs. We are also exploring the use of these features in Inference-Engine, a deep learning library designed to facilitate neural network training and inference for high-performance computing applications written in modern Fortran.

Rasmussen, Katherine↗

Search for Higgs boson pair production in the two bottom quarks plus two photons final state in p p collisions at s = 13 TeV with the ATLAS detector

Searches are performed for nonresonant and resonant di-Higgs boson production in the $b\bar{b}γγ$ final state. The dataset used corresponds to an integrated luminosity of 139 fb –1 of proton–proton collisions at a center-of-mass energy of 13 TeV recorded by the ATLAS detector at the CERN Large Hadron Collider. No excess above the expected background is found and upper limits on the di-Higgs boson production cross sections are set. A 95% confidence-level upper limit of 4.2 times the cross section predicted by the Standard Model is set on pp → HH nonresonant production, where the expected limit is 5.7 times the Standard Model predicted value. The expected constraints are obtained for a background hypothesis excluding pp → HH production. The observed (expected) constraints on the Higgs boson trilinear coupling modifier κ λ are determined to be [–1.5, 6.7] ([– 2.4, 7.7]) at 95% confidence level, where the expected constraints on κ λ are obtained excluding pp → HH production from the background hypothesis. For resonant production of a new hypothetical scalar particle X (X → HH → $b\bar{b}γγ$), limits on the cross section for pp → X → HH are presented in the narrow-width approximation as a function of m X in the range 251 GeV ≤ m X ≤ 1000 GeV. The observed (expected) limits on the cross section for pp → X → HH range from 640 fb to 44 fb (391 fb to 46 fb) over the considered mass range.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Quantized-"Gray-Scale" Electronic Synapses

Proposed array of programmable synaptic connections for electronic neural network applications offers multiple quantized levels of connection strength using only simple, two-terminal, binary microswitch devices. Subgrids in fine grid of programmable resistive connections connected externally in parallel to form coarser synaptic grid. By selection of pattern of connections in each subgrid, connection strength of synaptic node represented by that subgrid set at quantized "gray level". Device structures promise implementations of quantized-"gray-scale" synaptic arrays with very high density.

Lamb, James L.↗

Modeling the Cosmological Lyman-𝛼 Forest at the Field Level

The distribution of absorption lines in the spectra of distant quasars, called the Lyman-𝛼 (Ly-𝛼) forest, is a unique probe of cosmology and the intergalactic medium at high redshifts and small scales. The statistical power of ongoing redshift surveys demands precise theoretical tools to model the Ly-𝛼 forest. We address this challenge by developing an analytic, perturbative forward model to predict the Ly-𝛼 forest at the field level for a given set of cosmological initial conditions. Our model shows a remarkable performance when compared with the Sherwood hydrodynamic simulations: it reproduces the Ly-𝛼 forest flux power spectrum, its cross-correlation with dark matter halos, and the one-point probability distribution function of both fields at the percent level down to scales of a few Mpc. Our work provides crucial tools that bridge analytic modeling on large scales with simulations on small scales, enabling field-level inference from Ly-𝛼 forest data and simulation-based priors for cosmological analyses. Furthermore, this is especially timely for realizing the full scientific potential of the Ly-𝛼 forest measurements by the dark energy spectroscopic instrument.

Cosmological parameters↗

Search for massive resonances decaying into $WW$, $WZ$, $ZZ$, $qW$, and $qZ$ with dijet final states at $\sqrt{s}=13\text{ }\text{ }\mathrm{TeV}$

Results are presented from a search in the dijet final state for new massive narrow resonances decaying to pairs of W and Z bosons or to a W/Z boson and a quark. Results are based on data recorded in proton-proton collisions at s=13 TeV with the CMS detector at the CERN LHC. The data correspond to an integrated luminosity of 35.9 fb-1. The mass range investigated extends upwards from 1.2 TeV. No excess is observed above the estimated standard model background and limits are set at 95% confidence level on cross sections, which are interpreted in terms of various models that predict gravitons, heavy spin-1 bosons, and excited quarks. In a heavy vector triplet model, W′ and Z′ resonances, with masses below 3.2 and 2.7 TeV, respectively, and spin-1 resonances with degenerate masses below 3.8 TeV are excluded at 95% confidence level. In the case of a singlet W′ resonance masses between 3.3 and 3.6 TeV can be excluded additionally. Similarly, excited quark resonances, q*, decaying to qW and qZ with masses less than 5.0 and 4.7 TeV, respectively, are excluded. In a narrow-width bulk graviton model, upper limits are set on cross sections ranging from 0.6 fb for high resonance masses above 3.6 TeV, to 36.0 fb for low resonance masses of 1.3 TeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for a standard model-like Higgs boson in the mass range between 70 and 110 GeV in the diphoton final state in proton-proton collisions at $\sqrt{s} = 13$ TeV

The results of a search for a standard model-like Higgs boson decaying into two photons in the mass range between 70 and 110 GeV are presented. The analysis uses the data set collected by the CMS experiment in proton-proton collisions at $\sqrt{s} = 13$ TeV corresponding to integrated luminosities of 36.3 fb -1 , 41.5 fb -1 and 54.4 fb -1 during the 2016, 2017, and 2018 LHC running periods, respectively. No significant excess over the background expectation is observed and 95% confidence level upper limits are set on the product of the cross section and branching fraction for decays of an additional Higgs boson into two photons. The maximum deviation with respect to the background is seen for a mass hypothesis of 95.4 GeV with a local (global) significance of 2.9 (1.3) standard deviations. The observed upper limit ranges from 15 to 73 fb.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗