Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “JuMP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Confinement and deconfinement for any gauge group from dyons viewpoint

Basing on a semiclassical picture of dyons, we present a nonperturbative model of a pure Yang-Mills theory at any temperatures, for an arbitrary simple gauge group. We argue that at low temperatures dyons drive the Yang-Mills system for all groups to a phase where the 'eigenphases' of the Polyakov line are, as a vector, proportional to the Weyl vector being the half sum of positive roots. For most gauge groups it means confinement, in particular for 'quarks' in any N-ality nonzero representation of the SU(N) gauge group. At a critical temperature there is a 1st order phase transition for all groups (except SU(2) where the transition is 2nd order), characterized by a jump of Polyakov lines, irrespectively of whether the gauge group has a nontrivial center, or not.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effect of Accumulative Roll Bonding on Plastic Flow Properties of Commercially Pure Zirconium

Accumulative roll bonding (ARB) has been considered as one of the promising techniques for fabrication of ultra-fine grained (UFG) metallic materials. The ARB process consists of several cycles of cutting, stacking, and rolling of metal sheets, so very high strains can be induced in the material resulting in significant grain refinement and in the formation of UFG microstructures. The ARB technique has been applied to a wide range of metallic materials such as Al and Al alloys, Mg, Fe and steels, Zr, Cu, as well as composite materials. UFG metallic materials processed via ARB show increased strength. Despite a significant body of experimental research into the deformation behaviour of the ARB-processed materials, the fundamentals of their plastic deformation are not fully understood yet. This work focuses on the effect of grain refinement via ARB-processing on the mechanical behavior and on the strain-rate sensitivity of commercially pure Zr (99.8% purity). The mechanical properties of the as-received coarse-grained (CG) and UFG (as-ARB processed) samples were studied at room temperature at two different strain rates. Mechanical strain rate jump tests were performed during tensile deformation to estimate the instantaneous strain-rate sensitivity. The evolution of surface relief during plastic deformation of pure Zr in both CG and UFG conditions was studied. The features of plastic deformation of pure Zr in both CG and UFG conditions are discussed.

36 MATERIALS SCIENCE↗

Dynamics of Water Confined in Synthetic Saponite Clays

The dynamics of water in two synthetic saponite clays (treated by microwave) with different interlayer spacing has been studied using the quasielastic neutron scattering technique. A model in which the molecules undergo random jump diffusion describes the dynamics of water in both clays. The dynamics of water confined in both saponite clays considered here is found to be hindered in comparison to the bulk phase. It is found that diffusivity increases for samples having higher interlayer spacing.

36 MATERIALS SCIENCE↗

Relationship between electromagnetic and acoustic emissions during plastic deformation of gamma-irradiated LiF monocrystals

Simultaneous measurements of acoustic emissions (AE) and electromagnetic emissions (EME) during plastic deformation and destruction under uniaxial compression along <001> direction are made on LiF monocrystals after gamma irradiation by {sup 60}Co source. The irradiation doses are 1, 2, and 10 Mrad. The EME measurements in the radio-frequency range are carried out using two types of electromagnetic sensors: (i) a simple electrical stub antenna and (ii) a toroidal inductance coil. Two checking experiments on unirradiated crystals are performed as the starting point to discover the effect of gamma irradiation on acoustic and electromagnetic emissive ability of plastically deformed ionic crystals. Unirradiated LiF monocrystals demonstrate high-intensive EME at easy glide and work hardening stages, as well as at the fracture during destruction of the sample. At radiation doses more than {approx}1 Mrad, in the active loading stage the EME of LiF monocrystals vanishes, except few individual electromagnetic pulses (only at 1 and 2 Mrad doses), which are time correlated with well-defined drop-jumps on the loading diagram and therefore can be associated with macroscopic crack openings. Moderate electromagnetic activity in irradiated crystals occurs only in the final stage of deformation at the complete fracture of the sample. Thus, after gamma irradiation the formation of polarization currents due to dynamic interaction between charged vacancies and moving dislocations is suppressed, and only EME connected with the redistribution of the free charge on the crack branches is observed. Acoustic emission diagrams of low-irradiated LiF are typical for the work hardening stage in crystals containing a great amount of strong point stoppers. At larger irradiation doses the AE diagram displays quite different behavior at low- and high-loading regions with a sharp boundary between them. The low-loading region shows poor AE activity, which changes sharply into high-active burst-like emission with an increase in loading. The boundary between two regions shifts to higher loadings with radiation dose. The higher is the radiation dose the lower is the relative intensity of AE in the high-stressed region. The physical mechanisms of EME and AE in gamma-irradiated ionic crystals are discussed.

36 MATERIALS SCIENCE↗

Spatial distribution of the charged particles and potentials during beam extraction in a negative-ion source

We report on the characteristics of the electronegative plasma in a large-scale hydrogen negative ion (H{sup -}) source. The measurement has been made with a time-resolved Langmuir probe installed in the beam extraction region. The H{sup -} density is monitored with a cavity ring-down system to identify the electrons in the negative charges. The electron-saturation current decreases rapidly after starting to seed Cs, and ion-ion plasma is observed in the extraction region. The H{sup -} density steps down during the beam extraction and the electron density jumps up correspondingly. The time integral of the decreasing H{sup -} charge density agrees well with the electron charge collected with the probe. The agreement of the charges is interpreted to indicate that the H{sup -} density decreasing at the beam extraction is compensated by the electrons diffusing from the driver region. In the plasmas with very low electron density, the pre-sheath of the extraction field penetrates deeply inside the plasmas. That is because the shielding length in those plasmas is longer than that in the usual electron-ion plasmas, and furthermore the electrons are suppressed to diffuse to the extraction region due to the strong magnetic field.

43 PARTICLE ACCELERATORS↗

Tracking shocked dust: State estimation for a complex plasma during a shock wave

We consider a two-dimensional complex (dusty) plasma crystal excited by an electrostatically-induced shock wave. Dust particle kinematics in such a system are usually determined using particle tracking velocimetry. In this work we present a particle tracking algorithm which determines the dust particle kinematics with significantly higher accuracy than particle tracking velocimetry. The algorithm uses multiple extended Kalman filters to estimate the particle states and an interacting multiple model to assign probabilities to the different filters. This enables the determination of relevant physical properties of the dust, such as kinetic energy and kinetic temperature, with high precision. We use a Hugoniot shock-jump relation to calculate a pressure-volume diagram from the shocked dust kinematics. Calculation of the full pressure-volume diagram was possible with our tracking algorithm, but not with particle tracking velocimetry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma resonances in a microwave-driven microdischarge

This work investigates resonances in a capacitively coupled, low pressure krypton microdischarge operated at 2.5 GHz. A circuit model for the device, which has a length dimension of approximately 1 mm, calculates impedance values for a range of electron densities. The model results predict several 'parallel' and 'series' resonances at the driving frequency when the electron density is approximately 8 x 10{sup 11} cm{sup -3} and 5 x 10{sup 12} cm{sup -3}. The series resonance occurs when the resistance approaches the output impedance of the radio-frequency signal source, minimizing the reflected power. These resonances explain an experimentally observed jump in intensity with increasing input power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High electronegativity multi-dipolar electron cyclotron resonance plasma source for etching by negative ions

A large area plasma source based on 12 multi-dipolar ECR plasma cells arranged in a 3 x 4 matrix configuration was built and optimized for silicon etching by negative ions. The density ratio of negative ions to electrons has exceeded 300 in Ar/SF{sub 6} gas mixture when a magnetic filter was used to reduce the electron temperature to about 1.2 eV. Mass spectrometry and electrostatic probe were used for plasma diagnostics. The new source is free of density jumps and instabilities and shows a very good stability for plasma potential, and the dominant negative ion species is F{sup -}. The magnetic field in plasma volume is negligible and there is no contamination by filaments. The etching rate by negative ions measured in Ar/SF{sub 6}/O{sub 2} mixtures was almost similar with that by positive ions reaching 700 nm/min.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion acceleration in a helicon source due to the self-bias effect

Time-averaged plasma potential differences up to 165 V over several hundred Debye lengths are observed in low pressure (p{sub n} < 1 mTorr) expanding argon plasmas in the Madison Helicon eXperiment (MadHeX). The potential gradient leads to ion acceleration greater than that predicted by ambipolar expansion, exceeding E{sub i} Almost-Equal-To 7 kT{sub e} in some cases. RF power up to 500 W at 13.56 MHz is supplied to a half-turn, double-helix antenna in the presence of a nozzle magnetic field, adjustable up to 1 kG. A retarding potential analyzer (RPA) measures the ion energy distribution function (IEDF) and a swept emissive probe measures the plasma potential. Single and double probes measure the electron density and temperature. Two distinct mode hops, the capacitive-inductive (E-H) and inductive-helicon (H-W) transitions, are identified by jumps in density as RF power is increased. In the capacitive (E) mode, large fluctuations of the plasma potential (V{sub p-p} Greater-Than-Or-Equivalent-To 140V, V{sub p-p}/V{sub p} Almost-Equal-To 150%) exist at the RF frequency and its harmonics. The more mobile electrons can easily respond to RF-timescale gradients in the plasma potential whereas the inertially constrained ions cannot, leading to an initial flux imbalance and formation of a self-bias voltage between the source and expansion chambers. In the capacitive mode, the ion acceleration is not well described by an ambipolar relation, while in the inductive and helicon modes the ion acceleration more closely follows an ambipolar relation. The scaling of the potential gradient with the argon flow rate and RF power are investigated, with the largest potential gradients observed for the lowest flow rates in the capacitive mode. The magnitude of the self-bias voltage agrees with that predicted for RF self-bias at a wall. Rapid fluctuations in the plasma potential result in a time-dependent axial electron flux that acts to 'neutralize' the accelerated ion population, resulting in a zero net time-averaged current through the acceleration region when an insulating upstream boundary condition is enforced. Grounding the upstream endplate increases the self-bias voltage compared to a floating endplate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Upgrade of the JET far infrared interferometer diagnostic

In recent years there has been a major upgrade of the JET far infrared diagnostic system consisting of a new laser system with the wavelength at 118.8 {mu}m at and more advanced processing electronics for phase counting. This provides a second colour measurement of the electron plasma density on the vertical system. Due to the shorter wavelength, the plasma induced laser beam refraction is reduced by a factor of three alleviating density errors caused by loss of signal (so-called 'fringe jumps'[A. Murari et al., Rev. Sci. Instrum. 77, 073505 (2006)]), in particular during high performance plasmas experiments in JET.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Magnetised Kelvin-Helmholtz instability in the intermediate regime between subsonic and supersonic regimes

The understanding of the dynamics at play at the Earth's Magnetopause, the boundary separating the Earth's magnetosphere and the solar wind plasmas, is of primary importance for space plasma modeling. We focus our attention on the low latitude flank of the magnetosphere where the velocity shear between the magnetosheath and the magnetospheric plasmas is the energetic source of Kelvin-Helmholtz instability. On the shoulder of the resulting vortex chain, different secondary instabilities are at play depending on the local plasma parameters and compete with the vortex pairing process. Most important, secondary instabilities, among other magnetic reconnection, control the plasma mixing as well as the entry of solar wind plasma in the magnetosphere. We make use of a two-fluid model, including the Hall term and the electron mass in the generalized Ohm's law, to study the 2D non-linear evolution of the Kelvin-Helmholtz instability at the magnetosheath-magnetosphere interface, in the intermediate regime between subsonic and supersonic regimes. We study the saturation mechanisms, depending on the density jump across the shear layer and the magnetic field strength in the plane. In the presence of a weak in-plane magnetic field, the dynamics of the Kelvin-Helmholtz rolled-up vortices self-consistently generates thin current sheets where reconnection instability eventually enables fast reconnection to develop. Such a system enables to study guide field multiple-island collisionless magnetic reconnection as embedded in a large-scale dynamic system, unlike the classical static, ad hoc reconnection setups. In this regime, reconnection is shown to inhibit the vortex pairing process. This study provides a clear example of nonlinear, cross-scale, collisionless plasma dynamics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Oscillating plasma bubbles. IV. Grids, geometry, and gradients

Plasma bubbles are created in an ambient plasma. The bubble is formed inside a cavity bounded by a negatively biased grid. Ions are injected through the grid and neutralized by electrons from either the background plasma or an internal electron emitter. The external electron supply is controlled by the grid bias relative to the external plasma potential. When the electron flux is restricted to the ion flux, the sheath of the bubble becomes unstable and causes the plasma potential to oscillate near the ion plasma frequency. The exact frequency depends on the net space charge density in the bubble sheath. The frequency increases with density and grid voltage, provided the grid forms a parallel equipotential surface. The present investigation shows that when the Debye length becomes smaller than the grid openings the electron flux cannot be controlled by the grid voltage. The frequency dependence on grid voltage and density is modified creating frequency and amplitude jumps. Low frequency sheath oscillations modulate the high frequency normal oscillations. Harmonics and subharmonics are excited by electrons in an ion-rich sheath. When the plasma parameters vary over the bubble surface, the sheath may oscillate at different frequencies. A cavity with two isolated grids has been used to investigate anisotropies of the energetic electron flux in a discharge plasma. The frequency dependence on grid voltage is entirely different when the grid controls the energetic electrons or the bulk electrons. These observations are important to several fields of basic plasma physics, such as sheaths, sheath instabilities, diagnostic probes, current, and space charge neutralization of ion beams.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The virial theorem for the smoothly and sharply, penetrably and impenetrably confined hydrogen atom

Confinement of atoms by finite or infinite boxes containing sharp (discontinuous) jumps has been studied since the fourth decade of the previous century, modelling the effect of external pressure. Smooth (continuous) counterparts of such confining potentials, that depend on a parameter such that in an appropriate limit they coincide with the sharp confining potentials, are investigated, with an emphasis on deriving the corresponding virial and Hellmann-Feynman theorems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase slips and dissipation of Alfvenic intermediate shocks and solitons

The time evolution of a rotational discontinuity, characterized by a change of the magnetic-field direction by an angle {Delta}{theta} such that {pi}<|{Delta}{theta}|<2{pi} and no amplitude variation, is considered in the framework of asymptotic models that, through reductive perturbative expansions, isolate the dynamics of parallel or quasi-parallel Alfven waves. In the presence of viscous and Ohmic dissipation, and for a zero or sufficiently weak dispersion (originating from the Hall effect), an intermediate shock rapidly forms, steepens and undergoes reconnection through a quasi gradient collapse, leading to a reduction of |{Delta}{theta}| by an amount of 2{pi}, which can be viewed as the breaking of a topological constraint. Afterwards, as |{Delta}{theta}|<{pi}, the intermediate shock broadens and slowly dissipates. In the case of a phase jump |{Delta}{theta}|>3{pi}, which corresponds to a wave train limited on both sides by uniform fields, a sequence of such reconnection processes takes place. Differently, in the presence of a strong enough dispersion, the rotational discontinuity evolves, depending on the sign of {Delta}{theta}, to a dark or bright soliton displaying a 2{pi} phase variation. The latter is then eliminated, directly by reconnection in the case of a dark soliton, or through a more complex process involving a quasi amplitude collapse in that of a bright soliton. Afterwards, the resulting structure is progressively damped. For a prescribed initial rotational discontinuity, both quasi gradient and amplitude collapses lead to a sizeable energy decay that in the collisional regime is independent of the diffusion coefficient {eta} but requires a time scaling like 1/{eta}. In the non-collisional regime where dissipation originates from Landau resonance, the amount of dissipated energy during the event is independent of the plasma {beta}, but the process becomes slower for smaller {beta}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Empirical laws of particle extraction from single-grid source of bipolar ion-electron flow

The present research is devoted to the problem of extraction grid choice for a single-grid source of bipolar ion-electron flow. The paper contains detailed reference information on ion and electron extraction characteristics of 10 different grids with broad range of parameters: aperture width (0.09-0.6 mm), grid transparency (0.19-0.51), thickness (0.036-0.5 mm), and with different aperture geometry. The grids with square, circular, and slit apertures were made with different technologies: laser cutting, welding, weaving, and electrolytic erosion. The general regularities of the ion and electron extraction from the single-grid source are experimentally researched for the cases of dc and RF extraction grid biasing. A conclusion has been made that the maximum extracted ion current at low ion energy (0-200 eV) does not significantly vary for all the grids and does not exceed half of the primary ion current from plasma multiplied by the optical grid transparency. The low-energy limit of efficient ion extraction has been discovered which cannot be overcome by the aperture narrowing. A conclusion is made that the RF extraction mode is superior for all the researched grids since it is characterized by higher extracted ion current at any acceleration voltage for any grid with much more simple and smooth extraction curves behavior in comparison to the dc case as well as absence of arcing, jumps, and hysteresis of the measured curves at any RF voltages. The unique ability of the RF biased single-grid source of simultaneous ion/electron emission has been studied. The measured maximal attainable ion beam current compensation ratio is always sufficiently higher than 1 and typically varies in the range 2-6. The results obtained in the present paper demonstrate prospective of the single-grid source in space thruster applications and in modern technologies, particularly for ion beam processing of wide bandgap semiconductor devices such as GaN and SiC transistors due to inherent precise beam neutralization.

43 PARTICLE ACCELERATORS↗

A simple class of singular, two species Vlasov equilibria sustaining nonmonotonic potential distributions

We present new elementary, exact weak singular solutions of the steady state, two species, electrostatic, one dimensional Vlasov-Poisson equations. The distribution of the hot, finite mass, mobile ions is assumed to be log singular at the position of the electric potential's minimum. We show that the electron energy distributions on opposite sides of this minimum are not equal. This leads to a jump discontinuity of the electron distribution across its separatrix. A simple relation exists between the difference of these two electron distributions and that of the ions. The velocity Fourier transform of the electron singular distribution is smooth and appears as a simple Neumann series. Elementary, finite amplitude profiles of the electric potential result from Poisson equation, which are smoothly, but nonmonotonically and asymmetrically distributed in space. Two such profiles are given explicitly as appropriate for a nonmonotonic double layer and for a plasma bounded by a surface. The distributions of both electrons and ions supporting such potential meet smooth and kinetically stable boundary conditions at one plasma boundary. For sufficiently small potential to electron temperature ratios, the nonthermal, discontinuous electron distribution resulting at the other plasma boundary is also stable against Landau damped perturbations of the electron distribution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear compressions in merging plasma jets

We investigate the dynamics of merging supersonic plasma jets using an analytic model. The merging structures exhibit supersonic, nonlinear compressions which may steepen into full shocks. We estimate the distance necessary to form such shocks and the resulting jump conditions. These theoretical models are compared to experimental observations and simulated dynamics. We also use those models to extrapolate behavior of the jet-merging compressions in a Plasma Jet Magneto-Inertial Fusion reactor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Transient bow shock around a cylinder in a supersonic dusty plasma

Visual observations of the formation of a bow shock in the transient supersonic flow of a dusty plasma incident on a biased cylinder are presented. The bow shock formed when the advancing front of a streaming dust cloud was reflected by the obstacle. After its formation, the density jump of the bow shock increased as it moved upstream of the obstacle. A physical picture for the formation of the electrohydrodynamic bow shock is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗