Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Inverter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

The Stratospheric Aerosol and Gas Experiment II (SAGE II) design and in-orbit performance

The design and in-orbit performance data are presented for the Stratospheric Aerosol and Gas Experiment II (SAGE II) instrument which was launched by Shuttle on the Earth Radiation Budget Satellite. SAGE II is a sun photometer that measures the extinction of solar radiation caused by the earth's atmosphere in seven spectral channels ranging in center wavelength from 0.385 to 1.02 micrometers. These measurements, which occur twice each orbit during satellite sunrise and sunset, are inverted to yield vertical distributions of stratospheric aerosols, ozone, water vapor, and nitrogen dioxide. The SAGE II instrument consists of a Cassegrain telescope with a two axis gimbal mounting, a grating spectrometer, and a 12 bit data system. The instrument tracks the solar centroid in the azimuth plane and vertically scans the instrument's instantaneous field of view across the sun for tangent altitudes ranging from the earth's horizon to 150 km. SAGE II is a third generation instrument following the highly successful Stratospheric Aerosol Measurement II (SAM II) and SAGE I programs.

Mauldin, L. E., III↗

An assessment of OH airglow interference on the remote sensing of stratospheric HCl via limb sounding in the near-I.R.

Chemiluminescent emission from the formation of vibrationally excited OH at an altitude of approximately 85 km presents a barrier to earth-limb measurements of NIR emissions originating in the stratosphere. High-resolution measured spectra of OH airglow have not been reported, and thus it is difficult to assess its impact on moderately-high-resolution earth-limb spectroscopy capable of looking between strong OH lines. Low-resolution rocketborne spectrometer earth-limb measurements of OH airglow are mathematically inverted to recover vibrational-state populations that are used to simulate a higher resolution spectrum in the neighbourhood of 2843/cm. Implications for remote sensing HCl are presented.

Mergenthaler, J. L.↗

Estimation of canopy parameters for inhomogeneous vegetation canopies from reflectance data. II - Estimation of leaf area index and percentage of ground cover for row canopies

The canopy reflectance (CR) model for row-planted vegetation proposed earlier has been tested for soybean canopies in three different stages of growth and for corn canopies at early and full growth stages. The model fits the field-measured bidirectional CR data quite well. It is shown that, by inverting this model, one could estimate the leaf area index as well as the percentage of ground cover quite accurately from measured canopy reflectances.

Goel, N. S.↗

The effects of mantle and anelasticity on nutations, earth tides, and tidal variations in rotation rate

The paper models the effects of mantle anelasticity on luni-solar nutations, on tidal deformation, on tidal variations in rotation rate, and on the eigenfrequency of the free core nutation. The results can be used to invert observations to solve for the anelastic contributions to the shear and bulk moduli of the upper and lower mantle. Specific anelastic models are used to numerically estimate the effects of anelasticity on these geodetic observables. The nutation estimates are compared with observational results. Among the conclusions: (1) mantle anelasticity is likely to be the most important source of damping for the free core nutation; (2) present VLBI nutation results are, in principle, accurate enough to usefully bound anelasticity at diurnal periods. But the discrepancy between the VLBI observed nutations and the 1984 IAU nutation model cannot be explained by anelasticity and is not yet well enough understood to allow anelasticity to be determined from the data.

Wahr, John↗

The Nimbus 7 LIMS map archival tape

The development of the Langley Map Archival Tape (LAMAT) is described. The role of the Nimbus 7 orbit characteristics in the analysis and interpretation of LAMAT data is discussed. The pressure ranges and heights for the LAMAT components are given and the synoptic fields for each pressure and latitude were modeled as Fourier series in longitude with time-dependent coefficients. Examples of LAMAT temperature fields are presented and the accuracies of the LAMAT fields are evaluated. The fit between the Langley inverted profile archival tape (LAIPAT) and LAMAT is examined by comparing averaged zonal mean fields and standard deviations. Consideration is given to diurnal variations of LAIPAT data, and the time and spatial smoothing of the data.

Haggard, K. V.↗

Ocean surface pressure fields from satellite-sensed winds

The University of Washington's planetary boundary layer model is inverted to use remotely sensed satellite scatterometer-derived surface winds as input to calculate maritime surface pressure fields. The analysis of three different synoptic storm situations is performed using the model and is then compared to conventional National Weather Service analyses. Agreement is good. Isolation of the PBL secondary flow, stratification and thermal wind effects in the model revealed that each may be significant under certain conditions. However, the model shows sensitivity to the thermodynamic features only in a general sense and even a neutral stratification solution gives a good approximation. The high density of the scatterometer data produces mesoscale (hundreds of kilometers) dynamic details, which cannot be confirmed by conventional data at this stage.

Brown, Robert A.↗

Module theoretic zero structures for system matrices

The coordinate-free module-theoretic treatment of transmission zeros for MIMO transfer functions developed by Wyman and Sain (1981) is generalized to include noncontrollable and nonobservable linear dynamical systems. Rational, finitely-generated-modular, and torsion-divisible interpretations of the Rosenbrock system matrix are presented; Gamma-zero and Omega-zero modules are defined and shown to contain the output-decoupling and input-decoupling zero modules, respectively, as submodules; and the cases of left and right invertible transfer functions are considered.

Wyman, Bostwick F.↗

Observations of the 22 April 1982 stellar occultation by Uranus and the rings

The 1.5 m telescope of Teide Observatory at Teneriffe was used to observe an occultation of the stellar object KME 14 by the Uranus ring system. The telescope was equipped with a two-channel IR flux collector, with one passband centered at 4490 A and the other near 8800 A. Data processing procedures that were used are detailed. The ring profiles were analyzed with a square-well model, which accounted for diffraction and finite source size while treating each ring as sharp-edged and uniformly translucent. An emersion lightcurve was obtained and inverted to yield a temperature profile of the upper atmosphere of Uranus, which displayed a temperature maximum (at 8 microbar) near the equator.

Millis, Robert L.↗

Evaluation of a surface/vegetation parameterization using satellite measurements of surface temperature

Ground measurements of surface-sensible heat flux and soil moisture for a wheat-growing area of Beauce in France were compared with the values derived by inverting two boundary layer models with a surface/vegetation formulation using surface temperature measurements made from NOAA-AVHRR. The results indicated that the trends in the surface heat fluxes and soil moisture observed during the 5 days of the field experiment were effectively captured by the inversion method using the remotely measured radiative temperatures and either of the two boundary layer methods, both of which contain nearly identical vegetation parameterizations described by Taconet et al. (1986). The sensitivity of the results to errors in the initial sounding values or measured surface temperature was tested by varying the initial sounding temperature, dewpoint, and wind speed and the measured surface temperature by amounts corresponding to typical measurement error. In general, the vegetation component was more sensitive to error than the bare soil model.

Taconet, O.↗

A creep-rupture model of filament-wound spherical pressure vessels

The creep-rupture model is that of a quasi-isotropic filament-wound spherical pressure vessel, subjected to internal pressurization. The matrix material of the composite system is assumed to be linearly viscoelastic. Internal damage resulting from the relaxation of the matrix and the corresponding increase in microcracks is represented by a functional relationship between circumferential strain and transverse modulus. The numerical solution to this nonlinear problem is an iterative technique, whereby the elastic-viscoelastic correspondence principle is employed. In the Laplace domain, the associated elastic solution is obtained and this solution is inverted by the multidata method to yield the time-dependent solution.

Dozier, Jan D.↗

Stability analysis of two coupled Lorenz lasers and the coupling-induced periodic to chaotic transition

A linear stability analysis of two Lorenz lasers coupled by their electric fields has been performed, and it is shown that the bad cavity condition becomes a function of coupling and that a good cavity instability may occur if the injected fields are inverted before injection. In addition, it is shown that the symmetrically coupled Lorenz system is isomorphic to the original Lorenz system with new parameters. The stability analysis also predicts a lowering of the second laser threshold with coupling for both the chaotic and self-pulsing regimes. Numerical integration of the equations is in agreement with these predictions and has revealed a coupling induced transition from self-pulsing to chaotic behavior. The classification of the behavior of the coupled system in the parameter space of the coupling constants has been investigated and shows that the results of symmetric coupling allow enough of a margin for an experimental test of the theory. This would allow experimentalists to observe the actual Lorenz instability at excitations as low as 4-5 times above threshold.

Lawandy, N. M.↗

Inferring spectral reflectances of plant elements by simple inversion of bidirectional reflectance measurements

Inverting previously developed explicit expressions for a vertical architecture, bidirectional reflectances measured over corn viewing from the solar quadrant at azimuths near the principal plane are used to determine the spectral reflectances of plant elements. The leaf reflectance values extracted in three visible bands at viewing zenith angles of 70 deg, 60 deg, and 45 deg agree closely with laboratory-measured reflectances of corn leaves. At viewing zenith angle of 30 deg, the inversion breaks down, inasmuch as the inferred plant element reflectances are too high. Satisfactory results are also achieved when the same approach is applied to bidirectional reflectances measured over potted balsam firs, but when applied to soybeans reflectances, the procedure yields unreasonably high leaf reflectances. The failure in this case is attributed to the nonvertical architecture of the soybean canopy; however, for this canopy, inversion based on horizontal architecture is possible. The bidirectional reflectances measured from the solar quadrant, at viewing angles appreciably far from 'hot spot' viewing, approximately equal in magnitude half of the leaf reflectance. The 0.5 ratio is predicted by a previous analysis of opaque horizontal Lambertian facets, as the asymptotic value for a dense canopy at any viewing angle. For soybeans, this ratio applies very closely at 15 deg viewing zenith angle. The results suggest that inversion based on simple architecture, applying explicit expressions, might be of value, either in itself or as a preliminary step before inversion applying complex models.

Otterman, J.↗

Investigation of turbulent shear flows by numerical simulation

A data base (Kim et al., 1986) generated by direct numerical integration of the Navier-Stokes equations for unsteady three-dimensional turbulent channel flow at low Reynolds numbers is applied to investigate the physical processes acting in wall-bounded shear flows. The techniques used to construct the data base are outlined; the modeling of turbulence, streaks and streamwise vortices, horseshoe and inverted-horseshoe vortices, and vortex rings is described; the conditional sampling techniques employed are discussed; and typical results are presented graphically. An organized vorticity-field structure is revealed and found to be associated with the bursting process and a local peak in the wall pressure, indicating a possible approach to reducing viscous drag.

Kim, J.↗

A direct algorithm for solution of incompressible three-dimensional unsteady Navier-Stokes equations

A direct, implicit, numerical solution algorithm, with second-order accuracy in space and time, is constructed for the three-dimensional unsteady incompressible Navier-Stokes equations formulated in terms of velocity and vorticity, using generalized orthogonal coordinates to achieve the accurate solution of complex viscous flow configurations. A numerically stable, efficient, direct inversion procedure is developed for the computationally intensive divergence-curl elliptic velocity problem. This overdetermined partial differential operator is first formulated as a uniquely determined, nonsingular matrix-vector problem; this aspect of the procedure is a unique feature of the present analysis. The three-dimensional vorticity-transport equation is solved by a modified factorization technique which completely eliminates the need for any block-matrix inversions and only scalar tridiagonal matrices need to be inverted. The method is applied to the test problem of the three-dimensional flow within a shear-driven cubical box. Coherent streamwise vortex structures are observed within the steady-state flow at Re = 100.

Osswald, G. A.↗

Core plasma in the magnetosphere

The paper presents a review of new findings related to core plasma (which includes ions and electrons with energies less than 50 eV) identified in studies of magnetosphere during 1983-1986. These findings include the cleft ion fountain; the plasmaspheric heavy ion torus; core molecular ions; high core-plasma densities in the plasma-sheet boundary layer; intense transverse heating of core plasmas in the equatorial regions; the supersonic polar wind (H/+/ and He/+/); toroidal or ring heavy-ion distribution functions in the auroral region; conic-to-field-aligned ion signatures of inverted-V auroral events; and the large-scale electron density structure of the magnetosphere. The progress made on modeling core plasma includes simulation of thermal helium heating at the equator; kinetic models of the plasma transport from localized ionospheric regions; time-dependent hydrodynamic models of the polar wind and plasmasphere-ionosphere coupling; and kinetic models of plasmasphere refilling.

Horwitz, J. L.↗

Viscoelastic/damage modeling of filament-wound spherical pressure vessels

A model of the viscoelastic/damage response of a filament-wound spherical vessel used for long-term pressure containment is developed. The matrix material of the composite system is assumed to be linearly viscoelastic. Internal accumulated damage based upon a quadratic relationship between transverse modulus and maximum circumferential strain is postulated. The resulting nonlinear problem is solved by an iterative routine. The elastic-viscoelastic correspondence is employed to produce, in the Laplace domain, the associated elastic solution for the maximum circumferential strain which is inverted by the method of collocation to yield the time-dependent solution. Results obtained with the model are compared to experimental observations.

Hackett, Robert M.↗

Experimental measurement of solutal and thermal layers in unidirectional solidification

An experimental study to evaluate and characterize the effects and causes of convection in the directional solidification of metal alloys is described. The temporal history of the inverted density layers in front of a dendritic interface for directionally solidified ammonium chloride-(72 wt pct) water is presented based on photographic data taken using a laser schlieren system. Data are given for both 1-g and low-g solidification runs, and the stability of the layer is discussed. The reduction of buoyancy effects is shown to be significant, and the possible impact of reducing gravity level on freckling in metal alloys is considered.

Mccay, M. H.↗

Robust nonlinear attitude control of flexible spacecraft

This paper presents an approach to large-angle rotational maneuvers of a spacecraft-beam-tip body configuration based on nonlinear invertibility and linear feedback stabilization. A control law u sub d is derived for the decoupled control of attitude angles, lateral elastic deflections, slopes due to bending and angular deflection due to torsion at the tip of the beam using torquers and force actuators. For the stabilization of the elastic modes, a linear feedback control law u sub s is obtained based on a linearized model augmented with a servocompensator. Simulation results are presented to show that large slewing and elastic mode stabilization can be accomplished.

Singh, Sahjendra N.↗