Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERMETALLIC COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Equiatomic CoPt thin films with extremely high coercivity

In this paper, magnetic and structural properties of near-equiatomic CoPt thin films, which exhibited a high coercivity in the film-normal direction—suitable for perpendicular magnetic recording media applications—are reported. The films exhibited a larger coercivity of about 6.5 kOe at 8 nm. The coercivity showed a monotonous decrease as the film thickness was increased. The transmission electron microscopy images indicated that the as fabricated CoPt film generally consists of a stack of magnetically hard hexagonal-close-packed phase, followed by stacking faults and face-centred-cubic phase. The thickness dependent magnetic properties are explained on the basis of exchange-coupled composite media. Epitaxial growth on Ru layers is a possible factor leading to the unusual observation of magnetically hard hcp-phase at high concentrations of Pt.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth modes and epitaxy of FeAl thin films on a-cut sapphire prepared by pulsed laser and ion beam assisted deposition

FeAl films around equiatomic composition are grown on a-cut (112{sup ¯}0) sapphire substrates by ion beam assisted deposition (IBAD) and pulsed laser deposition (PLD) at ambient temperature. Subsequent successive annealing is used to establish chemical order and crystallographic orientation of the films with respect to the substrate. We find a strongly [110]-textured growth for both deposition techniques. Pole figures prove the successful preparation of high quality epitaxial films by PLD with a single in-plane orientation. IBAD-grown films, however, exhibit three in-plane orientations, all of them with broad angular distributions. The difference of the two growth modes is attributed to the existence of a metastable intermediate crystalline orientation as concluded from nonassisted sputter depositions at different substrate temperatures. The formation of the chemically ordered crystalline B2 phase is accompanied by the expected transition from ferromagnetic to paramagnetic behavior of the films. In accordance with the different thermally induced structural recovery, we find a step-like magnetic transition to paramagnetic behavior after annealing for 1 h at T{sub A} = 300 °C for IBAD deposition, while PLD-grown films show a gradual decrease of ferromagnetic signals with rising annealing temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Ga{sup +} irradiation in molecular-beam epitaxy grown Pt/Co/Pt thin films studied by magneto-optic spectroscopy

In-depth profile changes induced by Ga{sup +} ion irradiation in Pt(5 nm)/Co(3.3 nm)/Pt(20 nm)/Mo(20 nm) sandwiches MBE grown on Al{sub 2}O{sub 3} substrates are deduced from complex magneto-optic polar Kerr effect (PMOKE) measurements at photon energies between 1 and 5 eV. The Ga{sup +} irradiation stimulates a redistribution of Pt and Co and leads to broadening of alloyed regions at Pt-Co and Co-Pt interfaces, which is evaluated using PMOKE spectra. The effect of four Ga{sup +} fluences D between zero and 6 × 10{sup 15} Ga{sup +}/cm{sup 2} was studied. The observed PMOKE azimuth rotation peak centered at 4.5 eV reaches the maximum of 0.42° at D = 1 × 10{sup 15} Ga{sup +}/cm{sup 2} and becomes thus enhanced by a factor of 3.2 with respect to that in the non-irradiated sample. At D = 6 × 10{sup 15} Ga{sup +}/cm{sup 2} the peak amplitude falls to 0.05°. To find the in-depth profile of Co concentration s in the sandwiches as a function of D, the PMOKE azimuth rotation and ellipticity spectra are compared with a multilayer model, where ideal flat interfaces are replaced by sequences of Co{sub s}Pt{sub 1−s} layers. The dependence on D is compared with that evaluated by simulations of the structural effects of ion irradiation. At the highest D, the irradiation produces an almost complete erosion of the top Pt and Co accompanied by mixing at the Pt-Mo interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Granular nanostructures and magnetic characteristics of FePt-TiO{sub 2}/FePt-C stacked granular films

To realize a granular film composed of L1{sub 0}-FePt grains with high uniaxial magnetic anisotropy energy, K{sub u}, and segregants for heat-assisted magnetic recording, the FePt-TiO{sub 2}/FePt-C stacked film was investigated. The FePt-TiO{sub 2}/FePt-C stacked film has well-isolated granular structure with average grain size of 6.7 nm because the FePt-TiO{sub 2} film follows the FePt-C template film in microstructural growth. However, the K{sub u} value is quite low for total thickness of 9 nm: 5 × 10{sup 6} erg/cm{sup 3}. Exploration of the thickness dependence of L1{sub 0}-FePt(001) peaks in XRD spectra and cross-sectional TEM images suggest that degradation of the L1{sub 0} ordering appears near the middle of the FePt-TiO{sub 2} layer. The EDX-STEM mapping reveals that Ti atoms exist within the FePt grains in addition to the grain boundary. This indicates the possibility that TiO{sub 2} tends to be incorporated into the FePt grains and that it prevents L1{sub 0}-ordering of the FePt grains along the normal-to-plane direction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamical mechanism for coercivity tunability in the electrically controlled FePt perpendicular films with small grain size

This article reports property manipulations and related dynamical evolution in electromigration controlled FePt perpendicular films. Through altering voltage and treatment time of the power supply applied on the films, electronic momentum was fleetly controlled to manipulate the kinetic energy of Fe and Pt atoms based on momentum exchanges. The electromigration control behavior was proven to cause steerable ordering degree and grain growth in the films without thermal treatment. Processed FePt films with small grain size, high magnetocrystalline anisotropy, and controllable coercivity can be easily obtained. The results provide a novel method for tuning magnetic properties of other L1{sub 0} structured films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Compositional dependence of magnetic and high frequency properties of nanogranular FeCo-TiO{sub 2} films

A series of soft magnetic nanogranular FeCo-TiO{sub 2} films with different compositions of FeCo were fabricated on Si substrates by co-sputtering FeCo and TiO{sub 2}, and the magnetic and high frequency properties were studied in details. X-ray diffraction analysis confirmed that the films were nanocrystalline/amorphous composites. A high saturation magnetization of 14 kGs, a low coercivity of 5.3 Oe, a FMR frequency of 3.2 GHz, and a high resistivity of 1068 μΩ cm were obtained when the volume fraction of FeCo was 0.68. The excellence electromagnetic properties make the films an excellent candidate for microwave applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetocaloric effect in as-cast Gd{sub 1−x}Y{sub x} alloys with x = 0.0, 0.1, 0.2, 0.3, 0.4

In this report, we present the magnetocaloric effect of Gd{sub 1−x}Y{sub x} alloys (0.0 ≤ × ≤ 0.4) prepared by arc-melting from high purity Gd and Y precursors in inert atmosphere. The formation of Gd{sub 1−x}Y{sub x} solid solutions was verified by means of X-ray diffraction analysis across the compositional series; also, residual secondary phases Gd and Y were present. Magnetic characterization performed by Vibrating Sample Magnetometry at a maximum applied field of 3.0 T showed a drastic reduction of the magnetization saturation (from 233 emu/g for x = 0.0 to 183 emu/g for x = 0.4), due to a dilution effect of the Y alloying, together with a marked Curie temperature decrease from 296 K to 196 K between x = 0.0 and x = 0.4. The second-order character of the magnetic transition was established by Arrot plots for all the cases. On the other hand, the magnetic entropy variation, determined from numerical integration of Maxwell relation displayed excellent values above 5.30 J/kg K for alloys with x < 0.3 due to the steep transition of the thermomagnetic curves.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Engineering Gilbert damping by dilute Gd doping in soft magnetic Fe thin films

By analyzing the ferromagnetic resonance linewidth, we show that the Gilbert damping constant in soft magnetic Fe thin films can be enhanced by ∼6 times with Gd doping of up to 20%. At the same time, the magnetic easy axis remains in the film plane while the coercivity is strongly reduced after Gd inclusion. X-ray magnetic circular dichroism measurements reveal a strong increase in the orbital-to-spin moment ratio of Fe with increasing Gd concentration, in full agreement with the increase in the Gilbert damping obtained for these thin films. Combined with x-ray diffraction and vibrating sample magnetometry, the results demonstrate that the FeGd thin films with dilute Gd doping of up to 20% are promising candidates for spin-transfer-torque applications in soft magnetic devices, in which an enhanced damping is required.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Annealing temperature and thickness dependence of magnetic properties in epitaxial L1{sub 0}-Mn{sub 1.4}Ga films

Mn{sub 1.4}Ga films with high perpendicular magnetic anisotropy and high crystalline quality were grown on MgO substrates with Cr buffer layer using molecular beam epitaxy. The crystalline structure and the surface morphology of the films have been systematically investigated as functions of in-situ annealing temperature (T{sub a}) and film thickness. It is found that the magnetic properties can be largely tuned by adjusting T{sub a}. As T{sub a} increases, both saturation magnetization (M{sub s}) and uniaxial perpendicular magnetic anisotropy constant (K{sub u}) increase to the maximum values of 612 emu/cc and 18 Merg/cc at 300 °C, respectively, and then decrease. The morphology also changes with T{sub a}, showing a minimum roughness of 2.2 Å at T{sub a} = 450 °C. On the other hand, as the thickness increases, M{sub s} and K{sub u} increase while coercivity decreases, which indicates there is a magnetic dead layer with a thickness of about 1.5 nm at the interfaces. The detailed examination on the surface morphology of the films with various thicknesses shows a complicated film growth process, which can be understood from the relaxation mechanism of the interfacial strain.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles study on the relationship between magnetic anisotropy and anomalous Hall effect of bct-Fe{sub 50}Co{sub 50}

We studied quantitative relationship between the intrinsic anomalous Hall conductivity (σ{sub xy}) and the uniaxial magnetic anisotropy constant (K{sub u}) of bct-Fe{sub 50}Co{sub 50} using first-principles calculation because these quantities originate from spin-orbit interaction. We found that the obtained σ{sub xy} and K{sub u} with changing the axial ratio c/a (1≤c/a≤√(2)) exhibit similar behavior mainly arising from the common band mixing of the minority-spin d{sub xy} and d{sub x{sup 2}−y{sup 2}} states near the Fermi level which is sensitive to c/a.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The effect of Au and Ni doping on the heavy fermion state of the Kondo lattice antiferromagnet CePtZn

We have probed the effect of doping CePtZn with Au and Ni and also investigated in detail the magnetic behavior of the iso-structural CeAuZn. A magnetic ground state is observed in both CePt{sub 0.9}Au{sub 0.1}Zn and CePt{sub 0.9}Ni{sub 0.1}Zn with T{sub N} = 2.1 and 1.1 K and the coefficient of the linear term of electronic heat capacity γ = 0.34 and 0.9 J/mol K{sup 2}, respectively. The corresponding values for CePtZn are 1.7 K and 0.6 J/mol K{sup 2}. The altered values of T{sub N} and γ show that the electronic correlations in CePtZn are affected by doping with Au and Ni. CeAuZn orders magnetically near 1.7 K and its electrical resistivity shows a normal metallic behavior. Together with a γ of 0.022 J/mol K{sup 2} the data indicate a weak 4f-conduction electron hybridization in CeAuZn characteristic of normal trivalent cerium based systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunnel magnetoresistance effect in magnetic tunnel junctions using Fermi-level-tuned epitaxial Fe{sub 2}Cr{sub 1−x}Co{sub x}Si Heusler alloy

This paper reports a systematic investigation on the structural and magnetic properties of Fe{sub 2}Cr{sub 1−x}Co{sub x}Si Heusler alloys with various compositions of x by co-sputtering Fe{sub 2}CrSi and Fe{sub 2}CoSi targets and their applications in magnetic tunnel junctions (MTJs). Fe{sub 2}Cr{sub 1−x}Co{sub x}Si films of high crystalline quality have been epitaxially grown on MgO substrate using Cr as a buffer layer. The L2{sub 1} phase can be obtained at x = 0.3 and 0.5, while B2 phase for the rest compositions. A tunnel magnetoresistance (TMR) ratio of 19.3% at room temperature is achieved for MTJs using Fe{sub 2}Cr{sub 0.3}Co{sub 0.7}Si as the bottom electrode with 350 °C post-annealing. This suggests that the Fermi level in Fe{sub 2}Cr{sub 1−x}Co{sub x}Si has been successfully tuned close to the center of band gap of minority spin with x = 0.7 and therefore better thermal stability and higher spin polarization are achieved in Fe{sub 2}Cr{sub 0.3}Co{sub 0.7}Si. The post-annealing effect for MTJs is also studied in details. The removal of the oxidized Fe{sub 2}Cr{sub 0.3}Co{sub 0.7}Si at the interface with MgO barrier is found to be the key to improve the TMR ratio. When the thickness of the inserted Mg layer increases from 0.3 to 0.4 nm, the TMR ratio is greatly enhanced from 19.3% to 28%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Orientation-controlled nonepitaxial L1{sub 0} FePt thin films

We report an orientation-controlled FePt thin films grown nonexpitaxially on oxidized Si substrates without using any underlayers. After 700 °C annealing, the FePt single layer with thickness less than 10 nm shows good (001) texture and perpendicular anisotropy. The scanning electron microscope images indicate that these films are composed of isolated islands. For the films thicker than 20 nm, the films become continuous and (111) orientation appears. The transition of film texture relates to the change of morphology of the films. Finally, a theoretical mode based on minimizing surface energy is proposed to explain the texture variation in the films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic domain observation of FeCo thin films fabricated by alternate monoatomic layer deposition

FeCo thin films are fabricated by alternate monoatomic layer deposition method on a Cu{sub 3}Au buffer layer, which in-plane lattice constant is very close to the predicted value to obtain a large magnetic anisotropy constant. The variation of the in-plane lattice constant during the deposition process is investigated by reflection high-energy electron diffraction. The magnetic domain images are also observed by a photoelectron emission microscope in order to microscopically understand the magnetic structure. As a result, element-specific magnetic domain images show that Fe and Co magnetic moments align parallel. A series of images obtained with various azimuth reveal that the FeCo thin films show fourfold in-plane magnetic anisotropy along 〈110〉 direction, and that the magnetic domain structure is composed only of 90∘ wall.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of B additions in FePt and FePt:C films

B was co-sputtered with FePt films, leading to a granular structure; however, in addition to segregating at grain boundaries, local bonding of Fe-B was formed, which suppressed the ordering of FePt and thus degraded the perpendicular anisotropy. A boron capping layer was deposited on FePt:C (28 vol. %) films and B diffused into FePt:C grain boundaries during post-annealing. FePt:(B, C) films revealed a reduced grain size of 5.5 nm and perpendicular coercivity of 2T. Co-additions of B and C into FePt films may provide an alternative tuning knob to manipulate the microstructure and magnetic anisotropy of FePt films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of capping material on interfacial ferromagnetism in FeRh thin films

The role of the capping material in stabilizing a thin ferromagnetic layer at the interface between a FeRh film and cap in the nominally antiferromagnetic phase at room temperature was studied by x-ray magnetic circular dichroism in photoemission electron microscopy and polarized neutron reflectivity. These techniques were used to determine the presence or absence of interfacial ferromagnetism (FM) in films capped with different oxides and metals. Chemically stable oxide caps do not generate any interfacial FM while the effect of metallic caps depends on the element, showing that interfacial FM is due to metallic interdiffusion and the formation of a ternary alloy with a modified antiferromagnetic to ferromagnetic transition temperature.

36 MATERIALS SCIENCE↗

Local atomic structure inheritance in Ag{sub 50}Sn{sub 50} melt

Local structure inheritance signatures were observed during the alloying process of the Ag{sub 50}Sn{sub 50} melt, using high-temperature X-ray diffraction and ab initio molecular dynamics simulations. The coordination number N{sub m} around Ag atom is similar in the alloy and in pure Ag melts (N{sub m} ∼ 10), while, during the alloying process, the local structure around Sn atoms rearranges. Sn-Sn covalent bonds were substituted by Ag-Sn chemical bonds, and the total coordination number around Sn increases by about 70% as compared with those in the pure Sn melt. Changes in the electronic structure of the alloy have been studied by Ag and Sn K-edge X-ray absorption spectroscopy, as well as by calculations of the partial density of states. We propose that a leading mechanism for local structure inheritance in Ag{sub 50}Sn{sub 50} is due to s-p dehybridization of Sn and to the interplay between Sn-s and Ag-d electrons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement of exchange bias and training effect in ion-beam sputtered Fe{sub 46}Mn{sub 54}/Ni{sub 81}Fe{sub 19} bilayers

We present a remarkable enhancement by 300% of the exchange-bias field at room temperature, without affecting the coercivity value, via optimum magnetic annealing (250 °C/3 kOe) in ion-beam sputtered FeMn(30 nm)/NiFe(10 nm) bilayers. This specific behavior has been attributed to a higher degree of γ-FeMn(111) orientation that offers more interfacial FeMn moments to get pinned with the moments of the adjacent NiFe layer. Unlike the absence of training effect at room temperature, a pronounced training effect and an accompanying magnetization reversal asymmetry are evidenced upon field cooling below 50 K due to the presence of biaxial exchange induced anisotropy across the interdiffused FeMn/NiFe interface. The present findings not only have technological significance but also are of relevance to the understanding of interfacial spin disorder and frustration in these exchange-biased systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗