Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Gd 12 Co 5.3 Bi and Gd 12 Co 5 Bi, Crystalline Doppelgänger with Low Thermal Conductivities

Attempts to prepare Gd 12 Co 5 Bi, a member of the rare-earth (RE) intermetallics RE 12 Co 5 Bi, which were identified by a machine-learning recommendation engine as potential candidates for thermoelectric materials, led instead to formation of the new compound Gd 12 Co 5.3 Bi with a very similar composition. Phase equilibria near the Gd-rich corner of the Gd–Co–Bi phase diagram were elucidated by both lab-based and variable-temperature synchrotron powder X-ray diffraction, suggesting that Gd 12 Co 5.3 Bi and Gd 12 Co 5 Bi are distinct phases. The higher symmetry structure of Gd12Co5.3Bi (cubic, space group $Im\bar{3}$, Z = 2, a = 9.713(6) Å), as determined from single-crystal X-ray diffraction, is closely related to that of Gd12Co5Bi (tetragonal, space group Immm). Single Co atoms and Co–Co dumbbells are disordered with occupancies of 0.78(2) and 0.22(2), respectively, in Gd 12 Co 5.3 Bi, but they are ordered in Gd 12 Co 5 Bi. Consistent with this disorder, the electrical resistivity shows less dependence on temperature for Gd 12 Co 5.3 Bi than for Gd 12 Co 5 Bi. The thermal conductivity is low and reaches 2.8 W m –1 K –1 at 600 °C for both compounds; however, the temperature dependence of the thermal conductivity differs, decreasing for Gd 12 Co 5.3 Bi and increasing for Gd 12 Co 5 Bi as the temperature increases. Here, the unusual trends in thermal properties persist in the heat capacity, which decreases below 2R, and in the thermal diffusivity, which increases at higher temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metal Atom (Dis)Order and Superconductivity in YCaH n ( n = 8–20) High-Pressure Superhydrides

High-pressure superhydrides have attracted much attention due to their high superconducting critical temperatures (T c s). Our density functional theory (DFT) calculations, focusing on YCaH n (n = 8–20) compositions, found a number of nearly isoenthalpic YCaH 8 phases, differing only in the arrangement of the metal atoms, suggesting the potential stability of metal alloy superhydrides. The computed T c s of the considered YCaH 8 phases were higher than those of the isostructural I 4/ mmm MH 4 parent compounds. DFT enthalpies suggested that YCaH 12 could also be disordered; however, the T c s of the ordered variants spanned a wide range from 105 to 253 K at 200 GPa, showing that alloying could either mildly enhance or drastically reduce T c from that of the $Im\bar{3}m$ MH 6 parents. Finally, for YCaH 18 and YCaH 20 , only a single dynamically stable ordered superhydride was found, which we attribute to the differences in the structures of the most stable MH 9 and MH 10 binary hydride parents.

anions↗

From the Nonexistent Polar Intermetallic Pt 3 Pr 4 via Pt 2– x Pr 3 to Pt/Sn/Pr Ternaries

Here the Pt–Pr phase diagram has been explored well, recent work on rare-earth metal cluster halides with endohedral transition metal atoms has provided a new binary intermetallic that is nonexistent in the known phase diagram: The binary Pt 3 Pr 4 ( 1 ) crystallizes in a new structure type ( mP 56, P 2 1 /c, a = 12.353(2) Å, b = 7.4837(9) Å, c = 17.279(2) Å, β = 118.003(7)°, Z = 8) with six crystallographically independent Pt as well as eight Pr positions. The subsequent detailed investigation has led to another previously unreported, binary phase with the Ga 2 Gd 3 structure type, Pt 2–x Pr 3 ( 2 , tI 80, I 4/ mcm , a = 11.931(9) Å, c = 14.45(1) Å, Z = 16), that is practically overlapping with the rhombohedral Pt 2 Pr 3 existing in the phase diagram. Application of different tin containing fluxes to reproduce the newly detected phases brought about two almost iso-compositional ternary compounds with Sn, Pt 4 Sn 6 Pr 2.91 ( 3 ), and Pt 4 Sn 6 Pr 3 ( 4 ), as well as Pt 12 Sn 24 Pr 4.84 ( 5 ). 3 is a representative of the Pt 4 Ge 6 Ce 3 type ( oP 52, Pnma , a = 7.2863(3) Å, b = 4.4909(2) Å, c = 35.114(2) Å), while 4 represents a new variant of the prolific T 4 E 6 R 3 family (T = transition metal, E = main group (semi)metal, R = rare-earth metal; Pt 4 Sn 6 Pr 3 : oP 52, Pnma , a = 27.623(1) Å, b = 4.5958(2) Å, c = 9.3499(5) Å). Pt 12 Sn 24 Pr 5–x ( 5 ) crystallizes as a variant of the Ni 8 Sn 16 Gd 3 type ( cI 82, Im $\bar{3}$, a = 12.274(1) Å, Z = 2). Electronic structure calculations provide hints on the origin of the structural changes (pseudo-polymorphism) for Pt x Pr 3 with x = 1.97 and 2.00, respectively, and reveal that heteroatomic Pt–Pr bonding strongly dominates in both binaries while the addition of the reactive metal tin leads to dominating Pt–Sn bonding interactions in the ternaries; Pt–Pt bonding interactions are strong but represent a minority in the binaries and are not present at all in the ternaries.

36 MATERIALS SCIENCE↗

Ion Mobility Spectrometry Characterization of the Intermediate Hydrogen-Containing Gold Cluster Au7(PPh3)7H52+

We employ ion mobility spectrometry and density functional theory to determine the structure of Au7(PPh3)7H52+ (PPh3 = triphenylphosphine) which was recently identified by high mass resolution mass spectrometry. Experimental ion-neutral collision cross sections represent the momentum transfer between the ionic clusters and gas molecules averaged over the relative thermal velocities of the colliding pair, thereby providing structural insights. Theoretical calculations indicate the geometry of Au7(PPh3)7H52+ is similar to Au7(PPh3)7+, with three hydrogen atoms bridging two gold atoms and two hydrogen atoms forming single Au–H bonds. Collision induced dissociation products observed during IMS experiments reveal that smaller hydrogen containing clusters may be produced through fragmentation of Au7(PPh3)7H52+. Our findings indicate that hydrogen containing species like Au7(PPh3)7H52+ act as intermediates in the formation of larger phosphine ligated gold clusters. These results advance the understanding and ability to control the mechanisms of size selective cluster formation which is necessary for scalable synthesis of clusters with tailored properties. This work was supported by the U.S. Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences. M.A.H. acknowledges support from the DOE Science Undergraduate Laboratory Internship (SULI) program. H.H. acknowledges support from the DOE Office of Workforce Development for Teachers and Scientist (WDTS) under the Visiting Faculty Program (VFP). The efforts of K.A.M. and B.H.C. were supported by the Defense Threat Reduction Agency (Grant No. HDTRA1-14-1-0023). The research was performed using EMSL, a national scientific user facility sponsored by the DOE’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is operated by Battelle for DOE under Contract DE-AC05-76RL01830.

Ligare, Marshall R.↗

Structural Elucidation of cis / trans Dicaffeoylquinic Acid Photoisomerization Using Ion Mobility Spectrometry-Mass Spectrometry

Due to the recently uncovered health benefits and anti-HIV activities of dicaffeoylquinic acids (diCQAs), understanding their structures and functions is of great interest for drug discovery efforts. DiCQAs are analytically challenging to identify and quantify since they commonly exist as a diverse mixture of positional and geometric (cis/trans) isomers. In this work, we utilized ion mobility spectrometry coupled with mass spectrometry to separate the various isomers before and after UV irradiation. The experimental collision cross sections were then compared with theoretical structures to differentiate and identify the diCQA isomers. Our analyses found that naturally the diCQAs existed predominantly as trans/trans isomers, but after 3 h of UV irradiation, cis/cis, cis/trans, trans/cis, and trans/trans isomers were all present in the mixture. This is the first report of successful differentiation of cis/trans diCQA isomers individually, which shows the great promise of IMS coupled with theoretical calculations for determining the structure and activity relationships of different isomers in drug discovery studies.

Environmental Molecular Sciences Laboratory↗

Direct Structural and Chemical Characterization of the Photolytic Intermediates of Methylcobalamin Using Time-Resolved X-ray Absorption Spectroscopy

Cobalt-carbon bond cleavage is crucial to most natural and synthetic applications of the cobalamin class of compounds, and here we present the first direct electronic and geometric structural characteristics of intermediates formed following photoexcitation of methylcobalamin (MeCbl) using time-resolved X-ray absorption spectroscopy (XAS). We catch transients corresponding to two intermediates, in the hundreds of picoseconds and a few microseconds. Highlights of the picosecond intermediate, which is reduced in comparison to the ground state, are elongation of the upper axial Co-C bond and relaxation of the corrin ring. This is not so with the recombining photocleaved products captured at a few microseconds, where the Co-C bond almost (yet not entirely) reverts to its ground state configuration and a substantially elongated lower axial Co-N Im bond is observed. In conclusion, the reduced cobalt site here confirms formation of methyl radical as the photoproduct.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design and Synthesis of Highly-Dispersed WO 3 Catalyst with Highly Effective NH 3 –SCR Activity for NO x Abatement

The development of high-efficiency catalysts, especially for selective catalytic reduction of NO x with NH 3 (NH 3 –SCR) catalysts, with outstanding low-temperature catalytic reactivity and impressive lifetime remains a great challenge in the field of eliminating vehicle engine exhausts. In this work, we present a novel gas-bubbling-assisted dispersed hybrid nanocrystal-assisted hydrothermal deposition (GBD-HNHD) strategy to fabricate a W@CeZrAlO x catalyst with highly dispersed WO 3 nanocrystals (10 wt %) (W@CZA-HNHD). Compared with the W/CeZrAlO x catalyst prepared with the impregnation method (W@CZA-IM), W@CZA-HNHD not only exhibits highly effective low-temperature deNO x activity (the light-off temperature being lowered 45 °C) but also shows an exceptional stability (100 h time-on-stream testing with seven measurement cycles) and long lifetime (compares well with 135,000 miles). This work not only provides a new route to prepare an advanced catalyst with high loading isolated active sites but also lays a foundation for optimizing the utilization efficiency of the catalytically active species in the practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Origins of the Pressure-Induced Phase Transition and Metallization in the Halide Perovskite (CH 3 NH 3 )PbI 3

Hybrid halide perovskites are promising for applications because of their favorable optoelectronic properties and low cost. Here we investigate the effects of hydrostatic pressure on the structural and electronic properties of (MA)PbI 3 (MA = CH 3 NH 3 + ) using first-principles density functional theory calculations. Our calculations predict that at a pressure of 0.23 GPa, the orthorhombic Fmmm phase becomes unstable with respect to a cubic Im$\bar{3}$ phase, in good agreement with room-temperature experiments (~0.3 GPa). At higher pressures, about 6 GPa, we predict the onset of pronounced intra- and interoctahedral distortions. This symmetry lowering leads to the introduction of I 5p–I 5p* antibonding and Pb 6p–Pb 6p bonding character into the valence band maximum (VBM) and the conduction band minimum (CBM) states, respectively. We find this change in bond character explains the evolution of the VBM and CBM states under compression, trends that ultimately lead to metallization at significantly higher pressures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Designing a Scalable Fault Tolerance Model for High Performance Computational Chemistry: A Case Study with Coupled Cluster Perturbative Triples

In the last couple of decades, the massive computational power provided by the most modern supercomputers has resulted in simulation of higher order computational chem- istry methods, previously considered intractable. As the system sizes continue to increase, computational chemistry domain continues to escalate this trend using parallel comput- ing with programming models such as Message Passing Interface (MPI) and Partitioned Global Address Space (PGAS) programming models such as Global Arrays. The ever increasing scale of these supercomputers comes at a cost of reduced mean time between failures, currently in the order of days, and projected to be in the order of hours for up- coming extreme scale systems. While traditional disk based checkpointing methods are ubiquitous for storing intermediate solutions, they suffer from high overhead of writing and recovering from checkpoints. In practice, checkpointing itself often brings the system down. Clearly, methods beyond checkpointing are imperative to handling the aggravating issue of reducing MTBF. In this paper, we address this challenge by designing and im- plementing an efficient fault tolerant version of coupled cluster method with NWChem, using in memory data redundancy. We present the challenges associated with our de- sign including efficient data storage model, maintenance of at least one consistent data copy and the recovery process. Our performance evaluation without faults shows that the current design exhibits negligible overhead. In the presence of a fault, the proposed design incurs negligible overhead in comparison to the state of the art implementation without faults.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evolution and interplay of lithium metal interphase components revealed by experimental and theoretical studies

ABSTRACT: Lithium metal batteries (LMB) have high energy densities and are crucial for clean energy solutions. The characterization of lithium metal interphase is fundamentally and practically important but technically challenging. Taking advantage of synchrotron x-ray which has the unique capability of analyzing crystalline/amorphous phases quantitative-ly with statistical significance, we study the composition and dynamics of LMB interphase for a newly developed im-portant LMB electrolyte that is based on fluorinated ether. Pair distribution function analysis revealed the sequential role of anion and solvent in interphase formation during cycling. The relative ratio between Li2O and LiF first increases and then decreases during cycling, suggesting suppressed Li2O formation in both initial and long extended cycles. Theoretical studies revealed that in initial cycles, this is due to the energy barrier in many-electron transfer. In long extended cycles, the anion decomposition product Li2O encourages solvent decomposition by facilitating solvent adsorption on Li2O which is followed by concurrent depletion of both. This work highlights the important role of Li2O in transitioning from anion-derived interphase to a solvent-derived one.

Tan, Sha↗

Mechanochemical Solid Form Screening of Zeolitic Imidazolate Frameworks Using Structure-Directing Liquid Additives

We demonstrate a systematic application of the mechanochemical liquid-assisted grinding (LAG) methodology to screen for forms of zinc imidazolate (ZnIm 2 ), of fundamental importance as the simplest member of the zeolitic imidazolate framework materials family. The exploration of 45 different liquid additives, selected based on their molecular structure and physicochemical properties has resulted in eight different ZnIm 2 topological forms, appearing in 13 crystallographically distinct solid forms (including two previously unknown forms of the crb (BCT) topology), amorphous phases, and the interrupted moc-Zn 4 Im 8 HIm. All prepared topological forms were also explored computationally, using dispersion-corrected periodic density functional theory (DFT) calculations, enabling the rationalization of screening outcomes, and setting the stage for future prediction of additive-directed metal–organic framework (MOF) synthesis. This first systematic exploration of LAG in screening for three-dimensional MOFs demonstrates the potential of the liquid additive to not only accelerate materials synthesis, but also to direct it toward topologically different MOFs. The discovery of novel forms of a material that already exhibits at least 21 crystallographically and functionally different forms provides a strong testimony on the power of mechanochemistry in metal–organic materials discovery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polarized XANES Monitors Femtosecond Structural Evolution of Photoexcited Vitamin B 12

Ultrafast, polarization-selective time-resolved X-ray absorption near-edge structure (XANES) was used to characterize the photochemistry of vitamin B 12 , cyanocobalamin (CNCbl), in solution. Cobalamins are important biological cofactors involved in methyl transfer, radical rearrangement, and light-activated gene regulation, while also holding promise as light-activated agents for spatiotemporal controlled delivery of therapeutics. We introduce polarized femtosecond XANES, combined with UV–visible spectroscopy, to reveal sequential structural evolution of CNCbl in the excited electronic state. Femtosecond polarized XANES provides the crucial structural dynamics link between computed potential energy surfaces and optical transient absorption spectroscopy. Polarization selectivity can be used to uniquely identify electronic contributions and structural changes, even in isotropic samples when well-defined electronic transitions are excited. Our XANES measurements reveal that the structural changes upon photoexcitation occur mainly in the axial direction, where elongation of the axial Co–CN bond and Co–N Im bond on a 110 fs time scale is followed by corrin ring relaxation on a 260 fs time scale. In conclusion, these observations expose features of the potential energy surfaces controlling cobalamin reactivity and deactivation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of Waveform Profiles for Traveling Wave Ion Mobility Separations in Structures for Lossless Ion Manipulations

Structures for lossless ion manipulations (SLIM) have recently enabled a powerful implementation of traveling wave ion mobility spectrometry (TWIMS) for ultra-high resolution separations. However, optimization of experimental parameters remains challenging. Most TWIMS separations have utilized square-shaped waveforms applied by time-dependent voltage stepping across a repeating sets of electrodes; however, alternative waveforms may provide further improvements to resolution. In this work, we characterize five waveforms (including square and sine) in terms of their transmission efficiency, IMS resolution, and resolving power, and explore the effects of TW amplitude and speed on the performance of each. We found, consistent with previous work, separations were generally improved with higher TW amplitudes, moderately improved by lower speeds (limited by ion ‘surfing’ with the waves), and found decreases in signal intensity at the extremes of operating conditions. The triangle and asymmetric ‘ramp forward’ shaped profiles were found to provide modestly greater resolution and resolving power, an observation we tentatively attribute to their relatively uniform fields and minimal low-field regions.

59 BASIC BIOLOGICAL SCIENCES↗

Evaluating Ion Accumulation and Storage in Traveling Wave Based Structures for Lossless Ion Manipulations

Structures for lossless ion manipulations (SLIM) technology has demonstrated high resolving power ion mobility separation and flexibility to integrate complex ion manipulations into a single experimental platform. To enable IMS separations, trapping/accumulating ions inside SLIM (or in-SLIM) prior to injection of a packet for separations provides ease of operation and reduces the need for dedicated ion traps external to SLIM. To fully characterize the ion accumulation process, we have evaluated the effect of TW amplitudes, ion collection times, and storage times on the “in-SLIM” accumulation process. The study utilized a SLIM module comprising 5 distinct tracks, each with a specific ion accumulation configuration. The effect of the TW conditions on the accumulation process was investigated for a 3-peptide mixture: kemptide, angiotensin II, and neurotensin at a TW speed of 106 m/s. The effect of ion accumulation time/collection time and storage time was investigated, in addition to TW amplitude. Overall, the signal of the analyte ions increased when the ion collection time increased from 49 to 163 ms but decreased when the ion collection time increased further to 652 ms due to the space charge effects. Ion losses were observed at high TW amplitudes (e.g., 15 V p–p and 20 V p–p ). In addition, under space charge conditions (e.g., collection times of 163 and 652 ms), the signal of the analyte ions decreased with an increase in storage times for all TW amplitudes applied to the trapping region. For ion accumulation, the data indicate that gentler TW conditions must be utilized to minimize ion losses and fragments to benefit from the “in-SLIM” accumulation process. Finally, wider SLIM tracks provided better performance than those with narrower tracks.

59 BASIC BIOLOGICAL SCIENCES↗

Comprehensive Characterization of Water Group Ion Composition and Distributions in Saturn's Magnetosphere With Cassini Plasma Spectrometer Data

Saturn's magnetosphere is continuously supplied with neutrals from the Enceladus plume and the icy rings, which undergo ionization and charge-exchange to form a complex water-group plasma environment. While the Cassini Plasma Spectrometer (CAPS) instrument has provided extensive compositional information, detailed separation of individual water-group ion species in time-of-flight (TOF) data has not previously been achieved. In this study, we perform forward modeling of CAPS-IMS energy-per-charge (E/Q) and TOF spectra obtained between 2004 and 2012 to resolve O + , OH + , H 2 O + , and H 3 O + and to characterize their plasma properties, including number density, temperature, and thermodynamic κ. Our results demonstrate that O + is the dominant thermal ion species throughout Saturn's magnetosphere, comprising up to ∼70% of the total ion population beyond ∼5 Saturn radii (R S ). In contrast, molecular ions such as OH + , H 2 O + , and H 3 O + dominate closer to Enceladus but rapidly dissociate into atomic ions between ∼5 and 10 R S . This radial region is also characterized by the steepest increase in plasma flow speed, which rises from ∼40% to ∼80% of rigid corotation. Simultaneously, ion velocity distributions approach Maxwell–Boltzmann equilibrium, as indicated by high kappa values. These findings provide new constraints on the ion–neutral chemistry that regulates the balance between molecular and atomic ions in Saturn's magnetosphere. They also emphasize the critical role of the 5–10 R S region as a transition zone for both plasma composition and dynamics. Our results refine previous CAPS-based studies and underscore the need to incorporate seasonal variability and ionospheric coupling into future global models of Saturn's plasma environment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Chip-integrated metasurface full-Stokes polarimetric imaging sensor

Abstract Polarimetric imaging has a wide range of applications for uncovering features invisible to human eyes and conventional imaging sensors. Chip-integrated, fast, cost-effective, and accurate full-Stokes polarimetric imaging sensors are highly desirable in many applications, which, however, remain elusive due to fundamental material limitations. Here we present a chip-integrated Meta surface-based Full-Stokes Polar imetric Im aging sensor (MetaPolarIm) realized by integrating an ultrathin (~600 nm) metasurface polarization filter array (MPFA) onto a visible imaging sensor with CMOS compatible fabrication processes. The MPFA is featured with broadband dielectric-metal hybrid chiral metasurfaces and double-layer nanograting polarizers. This chip-integrated polarimetric imaging sensor enables single-shot full-Stokes imaging (speed limited by the CMOS imager) with the most compact form factor, records high measurement accuracy, dual-color operation (green and red) and a field of view up to 40 degrees. MetaPolarIm holds great promise to enable transformative applications in autonomous vision, industry inspection, space exploration, medical imaging and diagnosis.

47 OTHER INSTRUMENTATION↗

Superconductivity up to 243 K in the yttrium-hydrogen system under high pressure

The discovery of superconducting H 3 S with a critical temperature T c ~200 K opened a door to room temperature superconductivity and stimulated further extensive studies of hydrogen-rich compounds stabilized by high pressure. Here, we report a comprehensive study of the yttrium-hydrogen system with the highest predicted T c s among binary compounds and discuss the contradictions between different theoretical calculations and experimental data. We synthesized yttrium hydrides with the compositions of YH 3 , YH 4 , YH 6 and YH 9 in a diamond anvil cell and studied their crystal structures, electrical and magnetic transport properties, and isotopic effects. We found superconductivity in the Im-3m YH 6 and P6 3 /mmc YH 9 phases with maximal T c s of ~220 K at 183 GPa and ~243 K at 201 GPa, respectively. Fm-3m YH 10 with the highest predicted T c > 300 K was not observed in our experiments, and instead, YH 9 was found to be the hydrogen-richest yttrium hydride in the studied pressure and temperature range up to record 410 GPa and 2250 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermoresponsive polymer assemblies via variable temperature liquid-phase transmission electron microscopy and small angle X-ray scattering

Abstract Herein, phase transitions of a class of thermally-responsive polymers, namely a homopolymer, diblock, and triblock copolymer, were studied to gain mechanistic insight into nanoscale assembly dynamics via variable temperature liquid-cell transmission electron microscopy (VT-LCTEM) correlated with variable temperature small angle X-ray scattering (VT-SAXS). We study thermoresponsive poly(diethylene glycol methyl ether methacrylate) (PDEGMA)-based block copolymers and mitigate sample damage by screening electron flux and solvent conditions during LCTEM and by evaluating polymer survival via post-mortem matrix-assisted laser desorption/ionization imaging mass spectrometry (MALDI-IMS). Our multimodal approach, utilizing VT-LCTEM with MS validation and VT-SAXS, is generalizable across polymeric systems and can be used to directly image solvated nanoscale structures and thermally-induced transitions. Our strategy of correlating VT-SAXS with VT-LCTEM provided direct insight into transient nanoscale intermediates formed during the thermally-triggered morphological transformation of a PDEGMA-based triblock. Notably, we observed the temperature-triggered formation and slow relaxation of core-shell particles with complex microphase separation in the core by both VT-SAXS and VT-LCTEM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗