Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “H”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

GRO source candidates: (A) Nearby modest-size molecular clouds; (B) Pulsar with Wolf-Rayet companion that has lost its H-envelope

Within 100 pc of the sun there are over a hundred cirrus clouds with masses of approx. 60 solar mass and dense molecular clouds with masses of approx. 4 solar mass. If the local interstellar density of cosmic rays is also present in these clouds, the flux of neutral pion from the decay of gamma rays from the core of a cloud at a distance of 20 pc is approx. 13 x 10(exp -8) photons/sq cm/s. The flux from the more extensive cirrus cloud is approx 4 x 10(exp -7) photons/sq cm/s. A relativistic beam of particles generated by a compact stellar object and incident upon a large, close companion can be a strong gamma ray line source if more of the beam energy is used in interactions with C and O and heavier nuclei and less with H and He. This would be the case if the companion has lost its hydrogen envelope and nucleosynthesized much of its He into C, O, and Ne. Such objects are Wolf-Rayet stars and it is believed that some Wolf-Rayet stars do, in fact, have compact companions. For a beam of protons of 10(exp 37) erg/s, the flux at 1 kpc of the 4.4 MeV C-12 line could be as high as 5 x 10(exp -6) photons/sq cm/s. The fluxes of the deexcitation lines from the spallation products of O-16 are also presented.

Silberberg, R.↗

Comparison of high temperature, high frequency core loss and dynamic B-H loops of two 50 Ni-Fe crystalline alloys and an iron-based amorphous alloy

The availability of experimental data that characterizes the performance of soft magnetic materials for the combined conditions of high temperature and high frequency is almost nonexistent. An experimental investigation was conducted over the temperature range of 23 to 300 C and frequency range of 1 to 50 kHz to determine the effects of temperature and frequency on the core loss and dynamic B-H loops of three different soft magnetic materials; and oriented grain 50Ni-50Fe alloy, a nonoriented grain 50Ni-Fe alloy, and an iron based amorphous material (Metglas 2605SC). A comparison of these materials shows that the nonoriented grain 50Ni-50Fe alloy tends to have either the lowest or next lowest core loss for all temperatures and frequencies investigated.

Wieserman, W. R.↗

The Wolf-Rayet star population in the most massive giant H II regions of M33

Narrow-band images of NGC 604, NGC 595, and NGC 592, the most massive giant H II regions (GHRs) in M33 have been obtained, in order to study their Wolf-Rayet content. These images reveal the presence of nine candidates in NGC 604 (seven WN, two WC), 10 in NGC 595 (nine WN, one WC), and two in NGC 592 (two WN). Precise positions and estimated magnitudes are given for the candidates, half of which have so far been confirmed spectroscopically as genuine W-R stars. The flux in the emission lines of all candidates is comparable to that of normal Galactic W-R stars of similar subtype. A few of the putative superluminous W-R stars are shown to be close visual double or multiple stars; their newly estimated luminosities are now more compatible with those of normal W-R stars. NGC 595 seems to be overabundant in W-R stars for its mass compared to other GHRs, while NGC 604 is normal. Factors influencing the W-R/O number ratio in GHRs are discussed: metallicity and age appear to be the most important.

Drissen, Laurent↗

The Mg II h and k interstellar lines in the spectrum of the G-type giant HD 156854

The results of the measurements and analysis of the IUE observations of the 2800 Mg II doublet in the spectrum of HD 156854, a G9 III star, are presented. The relative power of the magnesium chromosphere, R(Mg) = 0.00001, is in agreement with the known data for giants of the same class. The emission profiles of this doublet present absorption cores, which are of interstellar origin. Taking into account the interstellar depletion of Mg, the derived density of interstellar hydrogen is n(H) = 0.001/cu cm, which agrees with the conclusion (Paresce 1984) about the possibility of large hydrogen concentrations in some directions of the Galaxy far from the sun.

Gurzadian, G. A.↗

The Olton, Texas, H chondrite regolith breccia - Paired with Dimmitt

The Olton ordinary chondrites (two stones found in 1948) are H group, solar wind-bearing regolith breccias. The proximity of the recovery site to the Dimmitt strewnfield, and the similarity in texture, composition, noble gas contents and isotopic ratios to Dimmitt indicate that Olton is paired with Dimmitt.

Keil, Klaus↗

H-beta photometry of V1010 Ophiuchi

An analysis is presented of previously unpublished intermediate and narrow band H-beta light curves of the short period eclipsing binary V1010 Oph. The temperature of the primary is determined directly by comparing the UV continuum with Kurucz model atmospheres and solve the broadband lightcurve using the Wilson-Devinney program. The present solution has the primary filling its Roche lobe while the secondary is detached from its lobe. An asymmetry in the light curve in which first quadrature (0.25 P) is brighter than the second quadrature (0.75 P) may be the result of local heating of the inner surface of the secondary by mass transfer from the primary. The present semidetached solution indicates that the system is probably evolved.

Corcoran, M. F.↗

Excited ionic and neutral fragments produced by dissociation of the N2(+)-asterisk H band

Atomic fluorescence produced by dissociative photoionization of N2 was observed and identified in experiments where fluorescent radiation was produced by irradiating N2 gas with undispersed synchrotron radiation. The spectrum was detected with a multichannel plate electron multiplier. Evidence is presented that the H band of N2(+)-asterisk does predissociate into excited neutral and ionic atoms.

Samson, James A. R.↗

Ca II H(2v) and K(2v) cell grains

The bright Ca II H(2v) and K(2v) grains, which are intermittently present in the interiors of network cells in quiet-sun areas, should provide important diagnostics of the dynamical interaction between the quiet photosphere and the chromosphere above it, but their nature has so far eluded identification. The extensive observational literature on these grains and on related phenomena is here reviewed, and various contradictions are resolved. It is concluded that the grains are a hydrodynamical phenomenon in which magnetic fields do not play a major role. The grains are due to interference between a pervasive standing oscillation and an 8 Mm horizontal wavelength in the chromosphere, and the wave trains of the evanescent p-mode interference pattern in the upper photosphere.

Rutten, Robert J.↗

A reduced order observer based controller design for H-infinity optimization

In this paper the H-infinity control problem is investigated. It is well-known that for this problem, in general, controllers of the same dynamic order as the given system are needed. However, in the case that the standard assumptions on two direct feedthrough matrices are not satisfied, it is here shown that dynamic compensators of a lower dynamical order can be found. This result can be derived by using the standard reduced order observer based controllers in the case that one or more states are measured without noise.

Stoorvogel, Anton A.↗

Helicopter flight-control design using an H(2) method

Rate-command and attitude-command flight-control designs for a UH-60 helicopter in hover are presented and were synthesized using an H(2) method. Using weight functions, this method allows the direct shaping of the singular values of the sensitivity, complementary sensitivity, and control input transfer-function matrices to give acceptable feedback properties. The designs were implemented on the Vertical Motion Simulator, and four low-speed hover tasks were used to evaluate the control system characteristics. The pilot comments from the accel-decel, bob-up, hovering turn, and side-step tasks indicated good decoupling and quick response characteristics. However, an underlying roll PIO tendency was found to exist away from the hover condition, which was caused by a flap regressing mode with insufficient damping.

Takahashi, Marc D.↗

Pulmonary function in men after oxygen breathing at 3.0 ATA for 3.5 h

A complete description of pulmonary measurements obtained after continuous O2 exposure of 13 healthy men at 3.0 ATA for 3.5 h is presented. Measurements included flow-volume loops, spirometry, and airway resistance(n = 12); CO diffusing capacity (n = 11); closing volumes (n= 6); and air vs. HeO2 forced vital capacity maneuvers (n = 5). The average difference in maximum mid expiratory flows at 50 percent vital capacity on air and HeO2 was found to be significantly reduced postexposure by 18 percent. Raw and CO diffusing capacity were not changed postexposure. It is concluded that the relatively large change in forced expiratory flow at 25-75 percent of vital capacity compared with the mean forced expiratory volume in 1 s, the reduction in density dependence of flow, and the normal Raw postexposure are all consistent with flow limitation in peripheral airways as a major cause of the observed reduction in expiratory flow.

Clark, J. M.↗

Vibration attenuation of the NASA Langley evolutionary structure experiment using H(sub infinity) and structured singular value (micron) robust multivariable control techniques

The use is studied of active control to attenuate structural vibrations of the NASA Langley Phase Zero Evolutionary Structure due to external disturbance excitations. H sub infinity and structured singular value (mu) based control techniques are used to analyze and synthesize control laws for the NASA Langley Controls Structures Interaction (CSI) Evolutionary Model (CEM). The CEM structure experiment provides an excellent test bed to address control design issues for large space structures. Specifically, control design for structures with numerous lightly damped, coupled flexible modes, collocated and noncollocated sensors and actuators and stringent performance specifications. The performance objectives are to attenuate the vibration of the structure due to external disturbances, and minimize the actuator control force. The control design problem formulation for the CEM Structure uses a mathematical model developed with finite element techniques. A reduced order state space model for the control design is formulated from the finite element model. It is noted that there are significant variations between the design model and the experimentally derived transfer function data.

Balas, Gary J.↗

Comparison of high temperature, high frequency core loss and dynamic B-H loops of a 2V-49Fe-49Co and a grain oriented 3Si-Fe alloy

The design of power magnetic components such as transformers, inductors, motors, and generators, requires specific knowledge about the magnetic and electrical characteristics of the magnetic materials used in these components. Limited experimental data exists that characterizes the performance of soft magnetic materials for the combined conditions of high temperature and high frequency over a wide flux density range. An experimental investigation of a 2V-49-Fe-49Co (Supermendur) and a grain oriented 3 Si-Fe (Magnesil) alloy was conducted over the temperature range of 23 to 300 C and frequency range of 0.1 to 10 kHz. The effects of temperature, frequency, and maximum flux density on the core loss and dynamic B-H loops for sinusoidal voltage excitation conditions are examined for each of these materials. A comparison of the core loss of these two materials is also made over the temperature and frequency range investigated.

Wieserman, W. R.↗

He(2+) and H(+) dynamics in the subsolar magnetosheath and plasma depletion layer

A magnetosheath interval monitored by a pair of close upstream spacecraft is analyzed. Composition measurements are used to determine separately many of the properties of H(+) and He(2+) in the magnetosheath, plasma depletion layer, and accelerated flow layer. Magnetosheath ion densities and density ratios are well correlated with those in the upstream and on average the He(2+)/H(+) temperature ratio remains constant across the shock. Temperatures decrease and anisotropies increase as the magnetosheath plasma is lost parallel to the magnetic field in the depletion layer. Compared to the magnetosheath, there is a 20-30-percent enhancement in the depletion layer He(2+)/H(+) density ratio and an enhancement in the depletion layer temperature ratio. By monitoring upstream conditions, a methodology is developed for studying the plasma depletion layer and magnetosheath separately.

Fuselier, S. A.↗

Total integral reactive cross sections for F + H2 yielding HF + H - Comparison of converged quantum, quasiclassical trajectory and experimental results

The paper reports converged quantum total integral reactive cross sections for the reaction F + H2 yielding HF + H, for initial rotational states j sub i = 0 and 1, using a time-dependent method. The results are compared to classical results and to the experimental results of Neumark et al. (1985). Strong quantum effects are found in the threshold region for both initial states (i.e., in the dependence of the reaction on initial state for low energies). The classical results agree better with experiment than do the quantum results; this appears to be due to errors in the potential used.

Neuhauser, Daniel↗

A new diabatic representation of the coupled potential energy surfaces for Na(3p P-2) + H2 yields Na(3s S-2) + H2 or NaH + H

A diabatic representation is presented of the coupled potential-energy surfaces for Na(3p P-2) + H2 yields Na (3s S-2) + H2 or NaH + H. The representation is designed to yield, upon diagonalization, realistic values for the two lowest energy adiabatic states at both asymptotes of the chemical reaction as well as near the conical intersection in the three-body interaction region. It is economical to evaluate and portable. It is suitable for dynamics calculations on both the quenching process and the electronically nonadiabatic chemical reaction.

Halvick, Philippe↗

A new finite element method for solving compressible Navier-Stokes equations based on an operator splitting method and h-p adaptivity

A new finite element method solving compressible Navier-Stokes equations is proposed. The method is based on a version of Strang's operator splitting and an h-p adaptive finite element approximation in space. This paper contains the formulation of the method with a detailed discussion of boundary conditions, a sample adaptive strategy and numerical examples involving compressible viscous flow over a flat plate with Reynolds number Re = 1000 and Re = 10,000.

Demkowicz, L.↗

h-p adaptive finite element methods in computational fluid dynamics

The principal ideas of h-p adaptive finite element methods for fluid dynamics problems are discussed. Applications include acoustics, compressible Euler and both compressible and incompressible Navier-Stokes equations. Several numerical examples illustrate the presented concepts.

Oden, J. T.↗