Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Grain”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

X-ray measurements of stresses and defects in EFG and large grained polycrystalline silicon ribbons

The Bond method was employed to measure the lattice parameter in an area of 0.4 mm in diameter of EFG Si-ribbons to an accuracy of + or - 0.00008 A. A Bond goniometer was built which included a goniostat with a special specimen holder to mount ribbons 1 m in length and 75 mm in width which could be rotated about two orthogonal axes, and a Leitz microscope for precision alignment of a particular area into the center of the goniostat and the small primary X-ray beam. The (321) planes were found to be parallel to the surface of the ribbons with an angular spread of about 15 deg. The poles of the (111) planes clustered about an angle of 25 deg away from the surface normal, again with a spread of 10 deg. The lattice parameter of a small piece of ribbon material was found to be a sub o = 5.43075 A. A maximum stress of 115 MPa was observed in a fractured ribbon which corresponded to the fracture stress of single crystals of Si.

Wagner, C. N. J.↗

The Apollo 17 drill core - Chemical systematics of grain size fractions

Data for 35 major, minor, and trace elements in 40 bulk and size fractions of core 70005-70003 (140-250 cm) are presented. The core is heterogeneous with depth. Moreover, the 1000 to 90 micron coarse fractions are nearly identical but quite different from the less than 20 micron fine fraction. The bulk soil chemistry is governed by the coarse fractions, because of their greater weight proportion in the sample. The 1000-90 micron fraction contains more ilmenite basalt and less orange glass components than the 90-20 micron fraction. The less than 20 micron fraction is consistently enriched in highland material at all depths in the drill core.

Laul, J. C.↗

Development of experimental concepts for investigating the strength behavior of fine-grained cohesive soil in the Spacelab/space shuttle zero-g environment

Three different sets of tests are proposed for the NASA Spacelab experimental program. The first of tests, designed to measure the true cohesion of several different soils, would be carried out in space through use of a specially prepared direct shear apparatus. As part of this first series of tests, it is recommended that a set of drained unconfined compression tests be performed terrestrially on the same soils as tested in space. A form of the direct tension test is planned to measure the true tensile strength of the same types of soils used in the first series of tests. The direct tension tests could be performed terrestrially. The combined results of the direct shear tests, direct tension tests, and unconfined compression tests can be used to construct approximate failure envelopes for the soils tested in the region of the stress origin. Relationships between true cohesion and true tensile strength can also be investigated. In addition, the role of physio-chemical variables should be studied. The third set of tests involves using a multiaxial cubical or true triaxial test apparatus to investigate the influence of gravity induced fabric anisotropy and stress nonhomogeneities on the stress strain behavior of cohesive soils at low effective stress levels. These tests would involve both in space and terrestrial laboratory testing.

Bonaparte, R.↗

A temporal/spectral analysis of small grain crops and confusion crops

Spectral data from the LANDSAT-2 satellite were used to study the growth cycles of fields of wheat, barley, alfalfa, corn, sunflowers, soybeans, rye, flax, oats, millet, grass, and hay. Signatures of pastures, trees, and idle fallow were also studied. The growth cycles were portrayed in the form of temporal plots of the greeness-brightness transformation vector applied to average channel pixel values within the fields, all of which were in three counties in North Dakota. The plots of each crop reveal characteristics which can be used in crop classification procedures.

Johnson, W. R.↗

Circular polarization from scattering by circumstellar grains

It is suggested that observations of circular polarization can be a valuable tool for the study of circumstellar nebulae. A simple model is presented to predict the percentage of circular polarization produced by scattering from the dust contained within such nebulae; it was found that a significant component of circular polarization can be produced in nebulae which have a net linear polarization. Possible observations of the red supergiants mu Cep and alpha Ori are given as examples.

Shafter, A.↗

Interstellar extinction by small-coated or uncoated graphite grains

Calculations have been made on the theoretical extinction of spherical graphite particles from 130 to 3500 nm. It is found that graphite particles of radius near 20 nm can have small (0.5 nm) coatings and still be responsible for the 220 nm peak in the interstellar extinction curve. New calculations also show that the effect of finite particle size is relatively unimportant in determining the extinction of graphite spheres at 220 nm.

Hecht, J.↗

Comets: Gases, ices, grains and plasma

The program and abstracts of the 97 papers delivered at the colloquium are presented. Cometary nuclei, comet dust, the coma, ion tails, several comet missions, and cometary origin and evolution were discussed.

Wilkening, L. L.↗

Isolated grain condensation behavior: Computation methods and first results

A set of efficient programs for calculation of condensation behavior in a system with either solar or carbon-rich elemental composition was developed to treat the course of condensation at very low pressures. These programs were applied to the problem of condensation at very low pressures. The minerals produced in the stellar and nova-related processes under study, including carriers of important volatile elements such as carbon and nitrogen, are candidates for accretion into meteorite parent bodies and planets, and may still be discernible in the enstatite chondrites.

Lewis, J. S.↗

The influence of acceleration forces on dendritic growth and grain structure

The results of experiments on the tin-15 wt pct lead system are presented, showing the effects on microstructure of solidification in the presence of acceleration forces from 0.0001 to 5 g for three cooling rates. An increase in the acceleration level is shown to drive fluid flow and cause dendrite remelting, fragmentation, and macrosegregation. The cooling rate impacts the final structure through its control of dendrite arm spacings and permeability to fluid flow. At the low (0.0001 g) acceleration, dendrite arm spacings deviated from the predicted relationship to cooling rate. An explanation for this anomaly is given which considers the temperature and concentration gradients in the low-gravity environment.

Johnston, M. H.↗

Narrowband photometry of Comet P/Stephan-Oterma and the backscattering properties of cometary grains

The results of narrowband filter photometry of Comet P/Stephan-Oterma are presented. For heliocentric distances between 1.95 and 1.58 AU prior to perihelion, OH, CN, and C2 production rates varied approximately as r to the -5th power. Following perihelion, an even steeper dependence of production rate on heliocentric distance was observed for these species. A pronounced brightening of the comet's continuum near opposition is interpreted in terms of preferential backscattering by the cometary dust. While Comet P/Stephan-Oterma is one of the dustier comets observed, it shows no indication of compositional anomalies in either the gas or the dust.

Millis, R. L.↗

Long range transport of fine grained sediments on Mars: Atmospheric dust loading, as inferred from Viking Lander imaging data

During the first Viking year, two global dust storms occurred and they contributed about 90% of the dust suspended in the Martian atmosphere on a global average, over the course of this year. The remainder was due to the cumulative effect of local dust storms. When globally distributed, the amount of suspended dust introduced into the atmosphere this Martian year was about 5x10(-3) g/sq cm. This mass loading was derived from the incremental optical depths measured over this year and estimates of the mean size of the dust particles (2.5 microns). During the second Martian year, global dust storms were far more muted than during the first year. No near perihelion dust storm occurred, and a somewhat weaker dust storm may have occurred near the start of the spring season in the Southern Hemisphere, at about the same time that the first global dust storm of the first year occurred. Thus, the dust loading derived for the first Martian year may be somewhat higher than the average over many Martian years, a conclusion that appears to be supported by preliminary studies of Martian years beyond the second Viking year on Mars.

Pollack, J. B.↗

Containerless drop tube solidification and grain refinement of NiAl3

The possibility of undercooling Ni-Al alloys below the liquidus in order to produce a single phase peritectic structure by containerless drop tube solidification was studied. Containerless process is a technique for both high purity contamination free studies as well as for investigating the undercooling and rapid solidification of alloys by suppression of heterogeneous nucleation on container walls. In order to achieve large undercoolings one must avoid heterogeneous nucleation of crystallization. It was shown that the Marshall Space Flight Center drop tubes ae unique facilities for containerless solidification experiments and large undercoolings are possible with some alloys. The original goal of undercooling the liquid metal well below the liquidus to the peritectic temperature during containerless free to form primarily NiAl3 was achieved. The microstructures were interesting from another point of view. The microstructure from small diameter samples is greatly refined. Small dendrite arm spacings such as these could greatly facilitate the annealing and solid state transformation of the alloy to nearly 10% NiAl3 by reducing the distance over which diffusion needs to occur. This could minimize annealing time and might make it economically feasible to produce NiAl3 alloy.

Ethridge, E. C.↗

Relic interstellar grains in Murchison meteorite

It is shown that, in the Murchison meteorite, the D/H ratios of hydrogen are unusually high in several separates and in one case up to 30 times the cosmic value of 2 x 10 to the -5th. Many phases show high C-13/C-12 ratios, up to 2.5 times the terrestrial value of 0.011. These C-13-rich and D-rich components of the two chemical elements are not correlated. They are heterogeneously distributed, suggesting that different components in the meteorite originated from different astrophysical sites and at different times. The D-rich hydrogen in the meteorite is probably due to molecules formed by ion-molecule reactions in interstellar clouds while the tiny amount of C-13-rich carbon is probably due to nucleosynthesis in red giant stars as suggested by Swart et al. (1983). Both of these heavy-isotope enriched components survived homogenization in the accumulation and subsequent history of the meteorites.

Yang, J.↗

Steady-state currents in p-n junction filaments or grains in case of large surface recombination velocities at lateral surfaces

Recently it has been pointed out that the saturation current of a semiconductor filament which constitutes part of a p-n junction diverges when the surface recombination velocity at the faces become infinitely large. Here it is pointed out that this is to be expected on physical grounds since, whenever the carrier concentration is kept off equilibrium by an outside agent, and at the same time recombination lifetimes in the bulk or in surface layers tend to zero, concentration gradients tend to infinity. As also previously noted, the situation can be remedied by using realistic (finite) surface recombination velocities in model calculations. However, this procedure leads to mathematical complexities which have been circumvented recently by the introduction of a heuristic approach. It is the aim of this paper to assess the validity of the heuristic approach by means of detailed and exact calculations.

Von Roos, O.↗