Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fluorination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Stabilizing LiCoO 2 at 4.6 V by regulating anti-oxidative solvents

For LiCoO 2 (LCO) operating at high voltages (>4.5 V vs. Li/Li + ), the intensive side reactions between LCO and traditional ethylene carbonate (EC)-based electrolytes with LiPF 6 salts can produce plenty of corrosive species (such as HF and HPO 2 F 2 ), causing severe surface degradation. Herein, anti-oxidative fluoroethylene carbonate (FEC) and difluoroethylene carbonate (DFEC) were selected as co-solvents to reduce the generation of corrosive species. Besides, PF 6 − anions enrich the Helmholtz plane of the LCO/electrolyte interface and promote the formation of a robust cathode/electrolyte interphase (CEI) featuring LiF/Li x PO y F z /Li 3 PO 4 inorganics and P-containing organics under the synergy of fluorinated solvents, which significantly inhibits the catalysis of highly oxidative Co 4+ /O n− (0 < n < 2). Benefiting from the reduced corrosive species and reinforced CEI, the layered structure of the LCO surface is well preserved during long-term cycling, with a highly reversible O3/H1-3 phase transition. Consequently, a LCO||graphite pouch cell exhibits a remarkable capacity retention of 85.7% after 500 cycles in 3.0–4.55 V. Furthermore, this work provides a new insight into developing advanced functional electrolytes for high-voltage lithium-ion batteries.

Co/O loss↗
DOE OSTI2024

Effect of ZnO and PEDOT:PSS charge selective layers on photovoltage of cuprous oxide (Cu 2 O) heterojunction solar cells

Electrochemical deposition (ECD) of Cu 2 O provides a scalable and low temperature pathway to solar cells with a theoretical high energy conversion efficiency of 23%, based on the 2.0–2.2 eV band gap of Cu 2 O. However, existing ECD-Cu 2 O devices are plagued by poor crystallinity and low selectivity of the electron and hole transport layers. Here we use Vibrating Kelvin Probe Surface Photovoltage Spectroscopy (VKP-SPV) to probe the charge transfer selectivity in FTO/ZnO/Cu 2 O/PEDOT:PSS/Ni heterojunction solar cells. Selective electron extraction is achieved at the ZnO back contact to Cu 2 O, as confirmed by a negative surface photovoltage signal. While the uncoated Cu 2 O surface is electron-selective due to the formation of a hole depletion layer, spin coating of a PEDOT:PSS film turns it into a hole-selective interface. After adding nickel metal ink top electrodes, functional 1.0 cm 2 solar cells with power conversion efficiency (PCE) of up to 0.07%, 195 mV open-circuit voltage, and 1.28 mA cm –2 short-circuit photocurrent are achieved. The photovoltaic performance is higher for aluminum doped zinc oxide (AZO) substrates than for fluorine doped tin oxide (FTO) due to the presence of a n-/p-junction that further increases the electron selectivity of the AZO/ZnO/Cu 2 O contacts. Overall, this work demonstrates the first application of PEDOT:PSS as a hole transport layer (HTL) for Cu 2 O and the use of VKP-SPV to measure the photovoltage contributions of the Cu 2 O interfaces. Furthermore, the ability to fabricate Cu 2 O solar cells at near room temperature without the use of vacuum methods or rare elements is an important step towards a scalable Cu 2 O PV technology.

14 SOLAR ENERGY↗
DOE OSTI2024

Influence of shape on crystal structure and optical properties of heterocyclic conjugated molecules

Organic optoelectronics are increasingly important due to their tunablilty, flexibility, and solution processability. Tuning optical properties of these materials as solids relies on the balance of weak non-covalent interactions that dictate crystal structure, but are difficult to predict. Our research aims to improve our understanding of how electrostatic interactions can direct and facilitate intramolecular interactions that dictate emergent properties of crystalline materials. This paper focuses on exploring how multi-fused thiophene ring systems that are popular in modern organic optoelectronic materials impact intramolecular interactions, while also investigating the role of molecular shape. In these examples, the shape of heterocyclic systems correlate with the crystal structures: while the bent heterocyclics show no discrete and discernable intramolecular interactions, those with bent shapes interact cofacially with one of the electron poor ArF pendants by twisting the arylene ethynylene backbone. Two of the control molecules, which bear non-fluorinated benzyl ester substituents, show intramolecular edge-face interactions, and several of these molecules show clear polymorphic behavior. Furthermore, these findings further our understanding of how discrete interactions can be altered not only by electrostatics, but also by shape, allowing for increasingly nuanced control over the crystal structures and optical properties of optoelectronic materials.

Guzmán, Elisa↗
DOE OSTI2025

Critical role of oxide anchoring groups in organic electron transport layers for perovskite solar cell stability

Charge transport layers (CTLs) play a critical role in the performance and long-term stability of perovskite solar cells (PSCs) by facilitating efficient charge extraction and providing interfacial stabilization. For organic CTLs, different functional groups have been designed to modulate the interactions with the substrate. Anchoring groups are used to establish strong adhesion to transparent conductive oxides (TCOs) but are not routinely incorporated in organic CTL design. In this study, we investigate the influence of anchoring groups in organic electron transport layers (ETLs) on PSC performance and stability by synthesizing and evaluating two naphthalene diimide (NDI)-based ETLs: NDI-(PhPA) 2 , functionalized with polar phenyl phosphonic acid (PhPA) groups, and NDI-(PhBr) 2 , modified with nonpolar bromophenyl (PhBr) groups. X-ray photoelectron spectroscopy confirms that PhPA functionalization leads to NDIs anchored onto fluorine-doped tin oxide (FTO) following chemical bath deposition, while NDI-(PhBr) 2 shows no detectable surface presence after deposition. We show that NDI-(PhPA) 2 deposits as a thin film on FTO, exhibiting strong adhesion, high solvent resistance, and enhanced light and thermal stability, achieving a maximum device efficiency of 14.3%. Stability assessments conducted under continuous illumination at 25 °C for 200 hours and at 65 °C for 100 hours demonstrate performance on par with TiO 2 -based ETLs. In contrast, NDI-(PhBr) 2 , which lacks strong anchoring interactions, fails to adhere to the FTO surface, resulting in a rapid decrease in efficiency over a few hours, comparable to devices without an ETL. These findings highlight the importance of anchoring groups in organic CTLs for achieving long-term PSC stability under operational conditions.

Kim, Sanggyun [Georgia Institute of Technology, At↗
DOE OSTI2020

CF + excitation in the interstellar medium

The detection of CF + in interstellar clouds potentially allows astronomers to infer the elemental fluorine abundance and the ionization fraction in ultraviolet-illuminated molecular gas. Because local thermodynamic equilibrium (LTE) conditions are hardly fulfilled in the interstellar medium (ISM), the accurate determination of the CF + abundance requires one to model its non-LTE excitation via both radiative and collisional processes. Here, we report quantum calculations of rate coefficients for the rotational excitation of CF + in collisions with para- and ortho-H 2 (for temperatures up to 150 K). As an application, we present non-LTE excitation models that reveal population inversion in physical conditions typical of ISM photodissociation regions (PDRs). We successfully applied these models to fit the CF + emission lines previously observed toward the Orion Bar and Horsehead PDRs. The radiative transfer models achieved with these new rate coefficients allow the use of CF + as a powerful probe to study molecular clouds exposed to strong stellar radiation fields.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Chemical approaches to artificial photosynthesis: A molecular, dye-sensitized photoanode for O 2 production prepared by layer-by-layer self-assembly

We describe here the preparation of a family of photoanodes for water oxidation that incorporate an electron acceptor–chromophore–catalyst in single molecular assemblies on nano-indium tin oxide (nanoITO) electrodes on fluorine-doped tin oxide (FTO). The assemblies were prepared by using a layer-by-layer, Atomic Layer Deposition (ALD), self-assembly approach. In the procedure, addition of an electron acceptor viologen derivative followed by a Ru II (bpy) chromophore and a pyridyl derivative of the water oxidation catalyst [Ru(bda) (L) 2 ] (bda = 2,2'-bipyridine-6,6'-dicarboxylate) 2 , were linked by ALD by addition of the bridge precursors TiO 2 , ZrO 2 , and Al 2 O 3 as the bridging groups giving the assemblies, FTO|nanoITO|–MV 2+ –ALD MO 2 –RuP2 2+ –ALD M'O 2 –WOC. In a series of devices, the most efficient gave water oxidation with an incident photon to current efficiency of 2.2% at 440 nm. Transient nanosecond absorption measurements on the assemblies demonstrated that the slow step in the intra-assembly electron transfer is the electron transfer from the chromophore through the viologen bridge to the nanoITO electrode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Ultrafast hole transfer from monolayer ReS 2 to thin-film F 8 ZnPc

We report a combined experimental and computational study on the charge transfer properties of heterostructures formed by monolayer 1T’-ReS 2 and fluorinated zinc phthalocyanine, F 8 ZnPc. Two-dimensional (2D) ReS 2 monolayer flakes were exfoliated from bulk crystals, and a F 8 ZnPc film with a thickness of 4 nm was thermally deposited on ReS 2 . Density functional theory shows that the two materials form a type-II band alignment. In transient absorption measurements, photocarriers are selectively excited in ReS 2 and monitored in F 8 ZnPc. Here, we found that holes in ReS 2 can transfer to F 8 ZnPc on a time scale shorter than 0.35 ps. The transferred holes have a long lifetime in F 8 ZnPc on the order of 1 ns, confirming the lack of electron transfer. The efficient charge transfer from a 1T’ transition metal dichalcogenide monolayer to an organic semiconductor illustrates the feasibility of developing 2D/organic heterostructures with in-plane anisotropic electronic and optoelectronic properties.

2D materials↗
DOE OSTI2021

Measurement of Local Magnetic Fields in Actinide Tetrafluorides

Fluorine-19 magnetic shielding tensors have been measured in a series of actinide tetrafluorides (AnF4) by solid state nuclear magnetic resonance (NMR) spectroscopy. Tetravalent actinide centers with 0 to 8 valence electrons can form tetrafluorides with the same unit cell, making these compounds an attractive choice for a systematic study of the variation in electronic structure across the 5f row of the Periodic Table. Pronounced deviations from predictions based on localized valence electron models have been detected by these experiments, which suggests that this approach may be used as a quantitative probe of electronic correlations.

Walter, Eric D.↗
DOE OSTI2021

Strong effect of scandium source purity on chemical and electronic properties of epitaxial Sc x Al 1–x N/GaN heterostructures

Epitaxial multilayer heterostructures of Sc x Al 1–x N/GaN with Sc contents x = 0.11–0.45 are found to exhibit significant differences in structural quality, chemical impurity levels, and electronic properties depending on the starting Sc source impurity levels. A higher purity source leads to a 2–3 orders of magnitude reduction in the carbon, oxygen, and fluorine unintentional doping densities in MBE-grown Sc x Al 1–x N/GaN multilayers. Electrical measurements of Sc x Al 1–x N/n + GaN single heterostructure barriers show a 5–7 orders of magnitude reduction in the electrical leakage for films grown with a higher purity Sc source at most Sc contents. The measured chemical and electrical properties of epitaxial Sc x Al 1–x N highlight the importance of the starting Sc source material purity for epitaxial device applications that need these highly piezoelectric and/or ferroelectric transition-metal nitride alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2022

External charge compensation in etched gallium nitride measured by x-ray photoelectron spectroscopy

Electronic states at GaN surfaces and at regrowth and heteroepitaxy interfaces inhibit electronic device performance. Understanding electronic state configuration at the GaN surface is, therefore, crucial for the development of GaN-based devices, which are currently of considerable interest in power electronic applications. GaN and other wurtzite III-nitrides possess large spontaneous polarization along the c-axis, producing a bound sheet charge at the surface, which affects the electronic state configuration through the formation of internal and external compensation charges. Defects induced by conventional plasma-based dry etching methods may inhibit the internal screening of this bound charge and thus increase the concentration of external charged states. The surface band bending of n-type Ga-face GaN (0001) was measured with x-ray photoelectron spectroscopy after inductively coupled plasma etching to investigate the impact of dry etching on external charge compensation. GaN samples were etched using inductively coupled plasma with varying rf power and a novel plasma-enhanced atomic layer etching method using an oxidation, fluorination, and ligand-exchange mechanism. The band bending varied from 0.0 to 0.8 ± 0.1 eV for the samples measured.

Hatch, Kevin A. (ORCID:0000000283118623)↗
DOE OSTI2023

Combining femtosecond laser annealing and shallow ion implantation for local color center creation in diamond

A common technique for color center creation in wideband gap semiconductors employs ion implantation and a subsequent thermal annealing. In general, this annealing process is conducted in a vacuum oven. Here, we exploit the annealing based on femtosecond laser pulses. For that purpose, we implant fluorine ions at 54 keV and chlorine ions at 74 keV in diamond and perform micrometer precise annealing using focused femtosecond laser pulses at 800 ± (30) nm with different pulse numbers and repetition rates. In this way, we were able to create shallow spots with color centers of varying brightness.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Nucleation of cubic boron nitride on boron-doped diamond via plasma enhanced chemical vapor deposition

Cubic boron nitride (c-BN), with a small 1.4% lattice mismatch with diamond, presents a heterostructure with multiple opportunities for electronic device applications. However, the formation of c-BN/diamond heterostructures has been limited by the tendency to form hexagonal BN at the interface. In this study, c-BN has been deposited on free standing polycrystalline and single crystal boron-doped diamond substrates via electron cyclotron resonance plasma enhanced chemical vapor deposition (ECR-PECVD), employing fluorine chemistry. In situ x-ray photoelectron spectroscopy (XPS) is used to characterize the nucleation and growth of boron nitride (BN) films as a function of hydrogen gas flow rates during deposition. The PECVD growth rate of BN was found to increase with increased hydrogen gas flow. In the absence of hydrogen gas flow, the BN layer was reduced in thickness or etched. The XPS results show that an excess of hydrogen gas significantly increases the percent of sp2 bonding, characteristic of hexagonal BN (h-BN), particularly during initial layer growth. Reducing the hydrogen flow, such that hydrogen gas is the limiting reactant, minimizes the sp2 bonding during the nucleation of BN. TEM results indicate the partial coverage of the diamond with thin epitaxial islands of c-BN. The limited hydrogen reaction is found to be a favorable growth environment for c-BN on boron-doped diamond.

Physics↗
DOE OSTI2024

Novel deuterium–tritium (DT) neutron activation diagnostics for increased neutron yield operations at Sandia’s Z-facility (invited)

As inertial confinement fusion experiments at Sandia National Laboratories’ Z-facility begin using deuterium–tritium (DT) fuels, the expected DT-neutron yields are expected to increase many orders of magnitude. This brings about the need for diagnostics that have a significantly higher dynamic range of operation and ability to obtain yields where there will be significant radiation holds. Using the current activation diagnostic infrastructure at the Z-facility, a pair of activation diagnostics are being developed. Here, the first is fluorine activation, which will be used in a similar manner to current copper activation diagnostics that are fielded in a rabbit for quick removal from the experiments without opening the vacuum experiment containment. The second is a prompt DT-neutron detector that exploits the activation of oxygen with similar operation characteristics as the current Be-probes fielded at Z. We will discuss the design of this pair of instruments, along with calibration work performed at Sandia’s Ion Beam Laboratory in support of the development and anticipated instrument performance.

Mangan, Michael Antony↗
DOE OSTI2025

On the functional dependence of transition-potential coupled cluster

Orbital relaxation of the core region is a primary source of error in the computation of core ionization and core excitation energies. Recently, Transition-Potential Coupled Cluster (TP-CC) methods have been used to explicitly treat orbital relaxation using non-variational molecular orbitals determined by reoccupation of orbitals optimized for a fractional core occupation. The amount of fractional occupation is governed by parameter λ, and recommended values for accurate TP-CCSD and XTP-CCSD computations of carbon, nitrogen, oxygen, and fluorine K edges were previously determined. Herein, we explore the performance of several density functionals for generating the fractionally occupied orbitals used in TP-CCSD. These functionals include HF, BP86, BH&HLYP, B3LYP, M06-2X, and ωB97m-V. The fractionally occupied orbitals computed across the various functionals were subsequently employed as the initial orbitals for our TP-CCSD calculations of organic K-edge x-ray absorption and photoelectron spectra. Regardless of the functional used to generate the fractionally occupied orbitals, the TP-CCSD calculations yield accurate and comparable core ionization energies, core excitation energies, and oscillator strengths.

Coupled-cluster methods↗
DOE OSTI2020

A chemically stabilized sulfur cathode for lean electrolyte lithium sulfur batteries

Lithium sulfur batteries (LSBs) are promising next-generation rechargeable batteries due to the high gravimetric energy, low cost, abundance, nontoxicity, and high sustainability of sulfur. However, the dissolution of high-order polysulfide in electrolytes and low Coulombic efficiency of Li anode require excess electrolytes and Li metal, which significantly reduce the energy density of LSBs. Quasi-solid-state LSBs, where sulfur is encapsulated in the micropores of carbon matrix and sealed by solid electrolyte interphase, can operate under lean electrolyte conditions, but a low sulfur loading in carbon matrix (<40 wt %) and low sulfur unitization (<70%) still limit the energy density in a cell level. Here, we significantly increase the sulfur loading in carbon to 60 wt % and sulfur utilization to ∼87% by dispersing sulfur in an oxygen-rich dense carbon host at a molecular level through strong chemical interactions of C–S and O–S. In an all-fluorinated organic lean electrolyte, the C/S cathode experiences a solid-state lithiation/delithiation reaction after the formation of solid electrolyte interphase in the first deep lithiation, completely avoiding the shuttle reaction. The chemically stabilized C/S composite retains a high reversible capacity of 541 mAh⋅g −1 (based on the total weight of the C/S composite) for 200 cycles under lean electrolyte conditions, corresponding to a high energy density of 974 Wh⋅kg −1 . The superior electrochemical performance of the chemical bonding-stabilized C/S composite renders it a promising cathode material for high-energy and long-cycle-life LSBs.

25 ENERGY STORAGE↗
DOE OSTI2022

Observation of a uniaxial ferroelectric smectic A phase

We report the observation of the smectic A F , a liquid crystal phase of the ferroelectric nematic realm. The smectic A F is a phase of small polar, rod-shaped molecules that form two-dimensional fluid layers spaced by approximately the mean molecular length. The phase is uniaxial, with the molecular director, the local average long-axis orientation, normal to the layer planes, and ferroelectric, with a spontaneous electric polarization parallel to the director. Polarization measurements indicate almost complete polar ordering of the ∼10 Debye longitudinal molecular dipoles, and hysteretic polarization reversal with a coercive field ∼2 × 10 5 V/m is observed. The SmAF phase appears upon cooling in two binary mixtures of partially fluorinated mesogens: 2N/DIO, exhibiting a nematic (N)–smectic Z A (SmZ A )–ferroelectric nematic (N F )–SmA F phase sequence, and 7N/DIO, exhibiting an N–SmZ A –SmA F phase sequence. The latter presents an opportunity to study a transition between two smectic phases having orthogonal systems of layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Data-driven electrolyte design for lithium metal anodes

Improving Coulombic efficiency (CE) is key to the adoption of high energy density lithium metal batteries. Liquid electrolyte engineering has emerged as a promising strategy for improving the CE of lithium metal batteries, but its complexity renders the performance prediction and design of electrolytes challenging. Here, we develop machine learning (ML) models that assist and accelerate the design of high-performance electrolytes. Using the elemental composition of electrolytes as the features of our models, we apply linear regression, random forest, and bagging models to identify the critical features for predicting CE. Our models reveal that a reduction in the solvent oxygen content is critical for superior CE. We use the ML models to design electrolyte formulations with fluorine-free solvents that achieve a high CE of 99.70%. This work highlights the promise of data-driven approaches that can accelerate the design of high-performance electrolytes for lithium metal batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

Interfacial solvation-structure regulation for stable Li metal anode by a desolvation coating technique

Rechargeable lithium (Li) metal batteries face challenges in achieving stable cycling due to the instability of the solid electrolyte interphase (SEI). The Li-ion solvation structure and its desolvation process are crucial for the formation of a stable SEI on Li metal anodes and improving Li plating/stripping kinetics. This research introduces an interfacial desolvation coating technique to actively modulate the Li-ion solvation structure at the Li metal interface and regulate the participation of the electrolyte solvent in SEI formation. Through experimental investigations conducted using a carbonate electrolyte with limited compatibility to Li metal, the optimized desolvation coating layer, composed of 12-crown-4 ether-modified silica materials, selectively displaces strongly coordinating solvents while simultaneously enriching weakly coordinating fluorinated solvents at the Li metal/electrolyte interface. This selective desolvation and enrichment effect reduce solvent participation to SEI and thus facilitate the formation of a LiF-dominant SEI with greatly reduced organic species on the Li metal surface, as conclusively verified through various characterization techniques including XPS, quantitative NMR, operando NMR, cryo-TEM, EELS, and EDS. The interfacial desolvation coating technique enables excellent rate cycling stability (i.e., 1C) of the Li metal anode and prolonged cycling life of the Li||LiCoO 2 pouch cell in the conventional carbonate electrolyte (E/C 2.6 g/Ah), with 80% capacity retention after 333 cycles.

42 ENGINEERING↗