Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FORCES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Ion Correlations Decrease Particle Aggregation Rate by Increasing Hydration Forces at Interfaces

The connection between solution structure, particle forces, and emergent phenomena at solid–liquid interfaces remains ambiguous. In this case study on boehmite aggregation, we established a connection between interfacial solution structure, emerging hydration forces between two approaching particles, and the resulting structure and kinetics of particle aggregation. In contrast to expectations from continuum-based theories, we observed a nonmonotonic dependence of the aggregation rate on the concentration of sodium chloride, nitrate, or nitrite, decreasing by 15-fold in 4 molal compared to 1 molal solutions. These results are accompanied by an increase in repulsive hydration forces and interfacial oscillatory features from 0.27–0.31 nm in 0.01 molal to 0.38–0.52 nm in 2 molal. Moreover, molecular dynamics (MD) simulations indicated that these changes correspond to enhanced ion correlations near the interface and produced loosely bound aggregates that retain electrolyte between the particles. In conclusion, we anticipate that these results will enable the prediction of particle aggregation, attachment, and assembly, with broad relevance to interfacial phenomena.

36 MATERIALS SCIENCE↗

Impact of US SO 2 Emission Reductions Between 1970 and 2010 on Seasonal Sulfate Aerosol Burden and Radiative Forcing Over the North Atlantic

Sulfate burden over the North Atlantic Ocean (NATL) exhibits strong seasonality despite no seasonality in anthropogenic sulfur dioxide (SO 2 ) emissions. However, the seasonality of sulfate aerosols over NATL has decreased since 1970, likely due to a reduction in the United States (US) SO 2 emissions following the Clean Air Act of 1970. We performed atmospheric chemistry and transport simulations to assess the impact of changing US SO 2 emissions between 1970 and 2010 on NATL sulfate burden and radiative forcing. United States SO 2 emission reductions weakened the seasonality in NATL sulfate burden by ∼17%, primarily due to a decrease in chemical production and transport in summer. These emission reductions caused a summertime radiative forcing (∼2 W m −2 ) twice as large as the wintertime forcing. Our findings highlight the complex, season-dependent responses of sulfate burden and radiative effects to regional emission changes.

North Atlantic↗

Saturation of tearing modes in reversed field pinches with locally linear force-free magnetic fields and its application to quasi-single-helicity states

A simple formula for predicting the width of a saturated island, formed as a consequence of tearing perturbation of linear force-free fields in cylindrical geometry, is derived. The formula makes it possible to calculate the saturated island width in terms of the values of parameters characterizing the initial force-free equilibrium and can be applied to equilibria of interest for reversed field pinches. In particular it is applied, in this paper, to force-free equilibria with piecewise constant radial profile of the pinch parameter, which have been recently suggested to be relevant for the formation of quasi-single-helicity states. The main result is that the island width becomes larger as a parameter, that quantifies the departure from a relaxed Taylor state, increases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

{lambda}NN Three-Body Force due to Coherent {lambda}-{sigma} Coupling

The overbinding problem of {sub {lambda}}{sup 5}He is solved by introducing a concept of coherent {lambda}-{sigma} coupling which is equivalent to a {lambda}NN three-body force. This three-body force is coherently enhanced in the 0{sup +} states of {sub {lambda}}{sup 4}H and {sub {lambda}}{sup 4}He. The 0{sup +}-1{sup +} splitting in these hypernuclei is mainly due to coherent {lambda}-{sigma} coupling and partly due to the {lambda}N spin-spin interaction. A {lambda}NN three-body potential is derived from the coupled-channel treatment. The origin of the repulsive and attractive nature of the three-body force is discussed. Coherent {lambda}-{sigma} coupling becomes more important in neutron-rich hypernuclei and especially in neutron-star matter at high densities. The possible existence of ''hyperheavy hydrogen'', {sub {lambda}}{sup 6}H, is suggested.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Surface force confinement cell for neutron reflectometry studies of complex fluids under nano-confinement

In this paper, we describe the construction of a new neutron surface force confinement cell (NSFCC). The NSFCC is equipped with hydraulically powered in-situ, temporally stable, force control system for simultaneous neutron reflectometry studies of nano-confined complex fluid systems. Test measurements with deuterated toluene confined between two opposing diblock copolymer (polystyrene + poly 2-vinylpyridine) coated quartz substrates demonstrate the capabilities of the NSFCC. With increasing hydraulically-applied force, a series of well-defined decreasing separations were observed from neutron reflectivity measurements. No noticeable changes in the hydraulic pressure used for controlling the surface separation were observed during the measurements, demonstrating the high stability of the apparatus. This newly designed NSFCC introduces a higher level of control for studies of confinement and consequent finite size effects on nano-scale structure in a variety of complex fluid and soft condensed matter systems.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

van der Waals forces: Accurate calculation and assessment of approximate methods in delectric nanocolloids up to 16nm

A microscopic method is used to calculate the van der Waals forces between large nanocolloids. We assess the reliability of some predictions derived from the most commonly used macroscopic method in practice, the Dzyaloshinskii-Lifshitz-Pitaevskii (DLP) theory combined with the Derjaguin approximation, by calculating them using the “coupled dipole method” (CDM). The CDM, which has demonstrated its ability to calculate VDW interactions for small-nanoclusters, accounts for all many-body forces, and it does not assume a continuous, homogeneous dielectric function in each material. It is shown that, out of three explored, one of the routinely assumed properties (‘small-separation dominance’) of van der Waals forces predicted from the macroscopic method is generally applicable for large spherical dielectric nanoclusters of diameter 16 nm allowing much more efficient CDM calculations. The failure of two other routinely assumed properties, ‘infinite- depth approximation’ and ‘sphere-cube analogy’, demonstrates that the effect of finite-size and shape is important in nanocolloid systems even at the large size of 16nm.

36 MATERIALS SCIENCE↗

Dynamic measurement and modeling of the Casimir force at the nanometer scale

We present a dynamic method for measurement of the Casimir force with an atomic force microscope (AFM) with a conventional AFM tip. With this method, originally based on the phase of vibration of the AFM tip, we are able to verify the Casimir force at distances of nearly 6 nm with an AFM tip that has a radius of curvature of nearly 100 nm. Until now dynamic methods have been done using large metal spheres at greater distances. Also presented is a theoretical model based on the harmonic oscillator, including nonidealities. This model accurately predicts the experimental data.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nonlinear generation of large-scale magnetic fields in forced spherical shell dynamos

In an earlier paper [P. W. Livermore, D. W. Hughes, and S. M. Tobias, ''The role of helicity and stretching in forced kinematic dynamos in a spherical shell'', Phys. Fluids 19, 057101 (2007)], we considered the kinematic dynamo action resulting from a forced helical flow in a spherical shell. Although mean field electrodynamics suggests that the resulting magnetic field should have a significant mean (axisymmetric) component, we found no evidence for this; the dynamo action was distinctly small scale. Here we extend our investigation into the nonlinear regime in which the magnetic field reacts back on the velocity via the Lorentz force. Our main result is somewhat surprising, namely, that nonlinear effects lead to a considerable change in the structure of the magnetic field, its final state having a significant mean component. By investigating the dominant flow-field interactions, we isolate the dynamo mechanism and show schematically how the generation process differs between the kinematic and nonlinear regimes. In addition, we are able to calculate some components of the transport coefficient {alpha} and thus discuss our results within the context of mean field electrodynamics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Integration of an Atomic Force Microscope in a Beamline Sample Environment

We developed and optimised an optics-free Atomic Force Microscope (AFM) that can be directly installed on most of the synchrotron radiation end-stations. The combination of Scanning Probe Microscopies with X-ray microbeams adds new possibilities to the variety of synchrotron radiation techniques. The instrument can be used for atomic force imaging of the investigated sample or to locally measure the X-ray absorption or diffraction, or it can also be used to mechanically interact with the sample while simultaneously taking spectroscopy or diffraction measurements. The local character of these measurements is intrinsically linked with the use of the Atomic Force Microscope tip. It is the sharpness of the tip that gives the opportunity to measure the photons flux impinging on it giving beam position monitor features, or allows to locally measure the absorption coefficient or the shape of the diffraction pattern. As an example of the possibilities opened by the instrument we will show diffraction measurements performed on a Ge/Si island while being indented with the AFM tip providing local measure of the Young coefficient. Three ESRF beamlines are going to be equipped with this new instrument.

43 PARTICLE ACCELERATORS↗

Two-dimensional force-free magnetic fields described by some nonlinear equations

A force-free magnetic field arises as a special case in the magnetostatic equation in plasmas when only the magnetic energy density is relevant while all other energy densities are negligible and so only the magnetic pressure is considered. In this article, we find the exact solutions of two-dimensional force-free magnetic fields described by Liouville, sine, double sine, sinh-Poisson, and power force-free magnetic equations. We use the generalized tanh method. In all those cases, the ratio of the current density and the magnetic field is not constant as it happens, e.g., in the solar atmosphere.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Finite element modeling of atomic force microscopy cantilever dynamics during video rate imaging

A dynamic finite element model has been constructed to simulate the behavior of low spring constant atomic force microscope (AFM) cantilevers used for imaging at high speed without active feedback as in VideoAFM. The model is tested against experimental data collected at 20 frame/s and good agreement is found. The complex dynamics of the cantilever, consisting of traveling waves coming from the tip sample interaction, reflecting off the cantilever-substrate junction, and interfering with new waves created at the tip, are revealed. The construction of the image from this resulting nonequilibrium cantilever deflection is also examined. Transient tip-sample forces are found to reach values up to 260 nN on a calibration grid sample, and the maximum forces do not always correspond to the position of steepest features as a result of energy stored in the cantilever.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fabrication of sharp tungsten-coated tip for atomic force microscopy by ion-beam sputter deposition

Tungsten (W) is significantly suitable as a tip material for atomic force microscopy (AFM) because its high mechanical stiffness enables the stable detection of tip-sample interaction forces. We have developed W sputter-coating equipment to compensate the drawbacks of conventional Si cantilever tips used in AFM measurements. By employing an ion gun commonly used for sputter cleaning of a cantilever tip, the equipment is capable of depositing conductive W films in the preparation chamber of a general ultrahigh vacuum (UHV)-AFM system without the need for an additional chamber or transfer system. This enables W coating of a cantilever tip immediately after sputter cleaning of the tip apex and just before the use in AFM observations. The W film consists of grain structures, which prevent tip dulling and provide sharpness (<3 nm in radius of curvature at the apex) comparable to that of the original Si tip apex. We demonstrate that in non-contact (NC)-AFM measurement, a W-coated Si tip can clearly resolve the atomic structures of a Ge(001) surface without any artifacts, indicating that, as a force sensor, the fabricated W-coated Si tip is superior to a bare Si tip.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Prediction of atomic force microscope probe dynamics through the receptance coupling method

The increased growth in the use of tip-based sensing, manipulations, and fabrication of devices in atomic force microscopy (AFM) necessitates the accurate prediction of the dynamic behavior of the AFM probe. The chip holder, to which the micro-sensing device is attached, and the rest of the AFM system can affect the overall dynamics of the probe. In order to consider these boundary effects, we propose a novel receptance coupling method to mathematically combine the dynamics of the AFM setup and probe, based on the equilibrium and compatibility conditions at the joint. Once the frequency response functions of displacement over force at the tool tip are obtained, the dynamic interaction forces between the tip and the sample in nanoscale can be determined by measuring the probe tip displacement.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Search for spin-orbit-force reduction at {sup 106,108}Zr around r-process path

Shell gap at the magic number N= 82 is important to reproduce the 2nd peak of r-process abundance. If a spin-orbit force is reduced in a very neutron-rich region, a shell quenching at N= 82 and a new shell closure at N70 are predicted. A shell evolution by the spin-orbit-force reduction can be searched for through the shape evolution of Zr isotopes around an expected double magic nuclei, {sup 110}Zr(Z = 40,N = 70). We performed {beta}-{gamma} and isomer spectroscopy at RIBF to observe low-lying states in {sup 106,108}Zr. The present results indicate a well deformed shape for {sup 106,108}Zr. The drastic reduction of the spin-orbit force most likely does not occur around {sup 110}Zr on an r-process path.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effects of realistic tensor force on nuclear structure

First-order tensor-force effects on nuclear structure are investigated in the self-consistent mean-field and RPA calculations with the M3Y-type semi-realistic interactions, which contain the realistic tensor force. The tensor force plays a key role in Z- or N-dependence of the shell structure, and in transitions involving spin degrees-of-freedom. It is demonstrated that the semi-realistic interactions successfully describe the N-dependence of the shell structure in the proton-magic nuclei (e.g. Ca and Sn), and the magnetic transitions (e.g. M1 transition in {sup 208}Pb).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Ponderomotive force in the presence of electric fields

This paper presents averaged equations of particle motion in an electromagnetic wave of arbitrary frequency with its wave vector directed along the ambient magnetic field. The particle is also subjected to an E(vector sign) Multiplication-Sign B(vector sign) drift and a background electric field slowly changing in space and acting along the magnetic field line. The fields, wave amplitude, and the wave vector depend on the coordinate along the magnetic field line. The derivations of the ponderomotive forces are done by assuming that the drift velocity in the ambient magnetic field is comparable to the particle velocity. Such a scenario leads to new ponderomotive forces, dependent on the wave magnetic field intensity, and, as a result, to the additional energy exchange between the wave and the plasma particles. It is found that the parallel electric field can lead to the change of the particle-wave energy exchange rate comparable to that produced by the previously discussed ponderomotive forces.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The extended wedge method: Atomic force microscope friction calibration for improved tolerance to instrument misalignments, tip offset, and blunt probes

One of the major challenges in understanding and controlling friction is the difficulty in bridging the length and time scales of macroscale contacts and those of the single asperity interactions they comprise. While the atomic force microscope (AFM) offers a unique ability to probe tribological surfaces in a wear-free single-asperity contact, instrument calibration challenges have limited the usefulness of this technique for quantitative nanotribological studies. A number of lateral force calibration techniques have been proposed and used, but none has gained universal acceptance due to practical considerations, configuration limitations, or sensitivities to unknowable error sources. This paper describes a simple extension of the classic wedge method of AFM lateral force calibration which: (1) allows simultaneous calibration and measurement on any substrate, thus eliminating prior tip damage and confounding effects of instrument setup adjustments; (2) is insensitive to adhesion, PSD cross-talk, transducer/piezo-tube axis misalignment, and shear-center offset; (3) is applicable to integrated tips and colloidal probes; and (4) is generally applicable to any reciprocating friction coefficient measurement. The method was applied to AFM measurements of polished carbon (99.999% graphite) and single crystal MoS{sub 2} to demonstrate the technique. Carbon and single crystal MoS{sub 2} had friction coefficients of {mu}= 0.20 {+-} 0.04 and {mu}= 0.006 {+-} 0.001, respectively, against an integrated Si probe. Against a glass colloidal sphere, MoS{sub 2} had a friction coefficient of {mu}= 0.005 {+-} 0.001. Generally, the measurement uncertainties ranged from 10%-20% and were driven by the effect of actual frictional variation on the calibration rather than calibration error itself (i.e., due to misalignment, tip-offset, or probe radius).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

On the nonlocal properties of relativistic ponderomotive force

A theory of relativistic ponderomotive force of transversely localized laser fields is presented by taking into account the nonlocal effects that correspond to higher order terms of the expansion parameter ε≡l/L, i.e., the ratio between particle excursion length and scale length of the field amplitude gradient, while the existing local theory is the first order of ε. As a method for preserving the Hamiltonian structure up to higher orders, we employ the variational principle in noncanonical phase space coordinates incorporated with the Lie transformation. By finding noncanonical coordinates and gauges, we obtain a new formula for the ponderomotive force that involves new terms in the third order represented by the second and third spatial derivatives. The force then depends not only on the local field gradient but also on the curvature and its variation which represent the effects of higher-order nonlocal particle motion. The higher-order terms are found to be subject to the symmetry of the field structure. The obtained formula is accessible to the regime in which the higher derivatives of the field amplitude regulate the interaction. We have applied the formula to laser fields exhibiting flat-top super Gaussian and concave hollow transverse structures which are effective in maintaining the long time scale interaction. The associated nonlocal effects are found to play a key role in determining the interactions. Comparison with the direct integration of the particle orbit demonstrates the validity of the derived formula.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗