Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electrical conductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Manipulating thermal and electronic transports in thermoelectric Bi 2 Te 3 nanowires by porphyrin adsorption

We report decoupling the electronic thermal and electrical conductivities is one of the limitations hindering a breakthrough in thermoelectric efficiency. After a conformal surface coating of bismuth telluride nanowires (Bi 2 Te 3 NWs) by porphyrins, the thermal conductivity increases from 0.8 to 1.0 Wm -1 K -1 at 300 K without any obvious change in electrical conductivity. Density Functional Theory (DFT) calculations assisted by Boltzmann Transport Equation (BTE) simulations of electronic transport properties indicate that the electronic thermal transport is enhanced by the depletion of surface charge carriers, which results in transition from metallic to semiconducting behavior. Thus, the adsorption of porphyrin onto the Bi 2 Te 3 NWs layer suppresses the surface electronic conduction, resulting in thermal electronic conduction dictated by the bulk of the NW. In conclusion, the results mean that electronic thermal transport can be decoupled from the electrical conductivity by changing the density of surface states on Bi 2 Te 3 NWs.

36 MATERIALS SCIENCE↗

Nitrogen-incorporation induced changes in the microstructure of nanocrystalline WO3 thin films

Nitrogen doped tungsten oxide (WO3) films were grown by reactive magnetron sputter-deposition by varying the nitrogen content in the reactive gas mixture keeping the deposition temperature fixed at 400 C. The crystal structure, surface morphology, chemical composition, and electrical resistivity of nitrogen doped WO3 films were evaluated using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and electrical conductivity measurements. The results indicate that the nitrogen-doping induced changes in the microstructure and electrical properties of WO3 films are significant. XRD measurements coupled with SEM analysis indicates that the increasing nitrogen content decreases the grain size and crystal quality. The nitrogen concentration increases from 0 at.% to 1.35 at.% with increasing nitrogen flow rate from 0 to 20 sccm. The corresponding dc electrical conductivity of the films had shown a decreasing trend with increasing nitrogen content.

36 MATERIALS SCIENCE↗

Nitrogen-doped graphene films from simple photochemical doping for n-type field-effect transistors

Highly nitrogen-doped GO (NGO) and n-type graphene field effect transistor (FET) have been achieved by simple irradiation of graphene oxide (GO) thin films in NH{sub 3} atmosphere. The electrical properties of the NGO film were performed on electric field effect measurements, and it displays an n-type FET behavior with a charge neutral point (Dirac point) located at around −8 V. It is suggested that the amino-like nitrogen (N-A) mainly contributes to the n-type behavior. Furthermore, compared to the GO film irradiated in Ar atmosphere, the NGO film is much more capable to improve the electrical conductivity. It may attribute to nitrogen doping and oxygen reduction, both of which can effectively enhance the electrical conductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radiation Shielding System Using a Composite of Carbon Nanotubes Loaded with Electropolymers

Single-wall carbon nanotubes (SWCNTs) coated with a hydrogen-rich, electrically conducting polymer such as polyethylene, receive and dissipate a portion of incoming radiation pulse energy to electrical signals that are transmitted along the CNT axes, and are received at energy-dissipating terminals. In this innovation, an array of highly aligned nanowires is grown using a strong electric field or another suitable orientation procedure. Polyethylene (PE), polymethymlethacrylate (PMMA), or other electrically conducting polymer is spin-coated onto the SWCNTs with an average thickness of a few hundred nanometers to a few tenths of micrometers to form a PE/SWCNT composite. Alternatively, the polymer is spin-coated onto the nanowire array or an anodized alumina membrane (AAM) to form a PE/metal core shell structure, or PE can be electropolymerized using the SWCNTs or the metal nanowires as an electrode to form a PE/SWCNT core shell structure. The core shell structures can be extruded as anisotropic fibers. A monomer can be polymerized in the presence of SWCNTs to form highly cross-linked PE/SWCNT films. Alternatively, Pb colloid solution can be impregnated into a three-dimensional PE/SWCNT nanostructure to form a PW/SWCNT/Pb composite structure. A face-centered cubic (FCC) arrangement provides up to 12 interconnection channels connected to each core, with transverse channel dimensions up to 20 nm, with adequate mechanical compressive strength, and with an associated electrical conductivity of around 3 Seimens/cm for currents ranging from 0.01 to 10 mA. This threedimensional nanostructure is used as a host material to house appropriate radiation shielding material such as hydrogen- rich polymer/CNT structures, metal nanoparticles, and nanowires. Thicknesses of this material required to attenuate 10 percent, 50 percent, and 90 percent of an incident beam (gamma, X-ray, ultraviolet, neutron, proton, and electron) at energies in the range of 0 440 MeV are being determined, for example, by measuring fluence rate reduction. For example, a radiation field arrives first at an exposed surface of the innovation and produces an associated first electric field within the metal-like fingers of the three-dimensional nanostructure. This field is intensified near the exposed tips of the fingers, and this intensified field generates an intensified second electric field near the adjacent exposed tips of the coated CNSs. This generates an associated electrical current in the CNSs, and the associated electropolymer coating. The current is received by the second substrate transport component and is transported to the dissipation mechanism located contiguously to the second substrate.

McKay, Chris↗

Synthesis and phase width of new quaternary selenides Pb{sub x}Sn{sub 6-x}Bi{sub 2}Se{sub 9} (x=0-4.36)

Quaternary chalcogenides Pb{sub x}Sn{sub 6-x}Bi{sub 2}Se{sub 9} (x=0-4.36) were synthesized with solid-state methods; their structures were determined from the X-ray diffraction of single crystals. Pb{sub x}Sn{sub 6-x}Bi{sub 2}Se{sub 9} crystallizes in an orthorhombic space group Cmcm (No. 63); the structure features a three-dimensional framework containing slabs of NaCl-(3 1 1) type that exhibits identical layers containing seven octahedra units, which expand along the direction [0 1 0]. Each slab contains fused rectangular units that are connected to each other with M-Se contacts in a distorted octahedral environment. Calculations of the band structure, measurements of Seebeck coefficient and electrical conductivity confirm that these compounds are n-type semiconductors with small band gaps and large electrical conductivities. - Graphical abstract: SYNOPSIS TOC New quaternary selenides, Pb{sub x}Sn{sub 6-x}Bi{sub 2}Se{sub 9} (x=0-4.36), were synthesized and their structure consisting layers of seven octahedra wide slabs expanding along the direction [0 1 0]. Display Omitted

36 MATERIALS SCIENCE↗

Synthesis, crystal structure and electrical properties of A-site cation ordered BaErMn{sub 2}O{sub 5} and BaErMn{sub 2}O{sub 6}

In this paper, we report on a synthesis procedure, structural and electrical properties of BaErMn{sub 2}O{sub 5} and BaErMn{sub 2}O{sub 6}, A-site double perovskites having layered arrangement of Ba and Er cations. These materials belong to a family of BaLnMn{sub 2}O{sub 5+δ} oxides, which up to now were successfully synthesized for Ln=Y and La–Ho lanthanides. Up to our knowledge, this is the first report on the successful synthesis of BaErMn{sub 2}O{sub 5} and BaErMn{sub 2}O{sub 6}, yielding>95 wt% of the considered compounds. Structural characterization of the materials is given at room temperature, together with in situ XRD studies, performed during oxidation of BaErMn{sub 2}O{sub 5} in air, at elevated temperatures up to 500 °C. A complex structural behavior was observed, with oxidation process of BaErMn{sub 2}O{sub 5} occurring at around 300 °C. The oxidized BaErMn{sub 2}O{sub 6} shows a structural phase transition at about 225 °C. Results of structural studies are supported by thermogravimetric measurements of the oxidation process, performed in air, as well as reduction process, preformed in 5 vol% of H{sub 2} in Ar. Additionally, isothermal oxidation/reduction cycles were measured at 500 °C, showing interesting properties of BaErMn{sub 2}O{sub 5+δ}, from a point of view of oxygen storage technology. Electrical conductivity of BaErMn{sub 2}O{sub 5} is of the order of 10{sup −4} S cm{sup −1} at room temperature and shows activated character on temperature with activation energy E{sub a}=0.30(1) eV. Positive sign of Seebeck coefficient for this material indicates holes as dominant charge carriers. Oxidized BaErMn{sub 2}O{sub 6} possesses much higher electrical conductivity, almost 0.2 S cm{sup −1} at room temperature. Additional, about 10-fold increase of electrical conductivity, occurring in the vicinity of 225 °C for this material, can be associated with phase transition from charge/orbital-ordered insulator COI(CE) to paramagnetic metal PM phase. The highest conductivity for BaErMn{sub 2}O{sub 6} was measured near 500 °C and is almost equal to 40 S cm{sup −1}, while negative sign of Seebeck coefficient can be associated with electrons being dominant charge carriers. - Graphical abstract: Structure and oxygen storage properties of BaErMn{sub 2}O{sub 5+δ}. - Highlights: • Synthesis of BaErMn{sub 2}O{sub 5} and BaErMn{sub 2}O{sub 6}. • Structural and transport properties of BaErMn{sub 2}O{sub 5+δ}. • Oxygen storage in BaErMn{sub 2}O{sub 5}–BaErMn{sub 2}O{sub 6} system. • Phase transitions in BaErMn{sub 2}O{sub 6}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solid state transport-based thermoelectric converter

A solid state thermoelectric converter includes a thermally insulating separator layer, a semiconducting collector and an electron emitter. The electron emitter comprises a metal nanoparticle layer or plurality of metal nanocatalyst particles disposed on one side of said separator layer. A first electrically conductive lead is electrically coupled to the electron emitter. The collector layer is disposed on the other side of the separator layer, wherein the thickness of the separator layer is less than 1 .mu.m. A second conductive lead is electrically coupled to the collector layer.

36 MATERIALS SCIENCE↗

Fuel cell electrode interconnect contact material encapsulation and method

A fuel cell stack includes a plurality of fuel cell cassettes each including a fuel cell with an anode and a cathode. Each fuel cell cassette also includes an electrode interconnect adjacent to the anode or the cathode for providing electrical communication between an adjacent fuel cell cassette and the anode or the cathode. The interconnect includes a plurality of electrode interconnect protrusions defining a flow passage along the anode or the cathode for communicating oxidant or fuel to the anode or the cathode. An electrically conductive material is disposed between at least one of the electrode interconnect protrusions and the anode or the cathode in order to provide a stable electrical contact between the electrode interconnect and the anode or cathode. An encapsulating arrangement segregates the electrically conductive material from the flow passage thereby, preventing volatilization of the electrically conductive material in use of the fuel cell stack.

30 DIRECT ENERGY CONVERSION↗

Polaronic conduction and Anderson localization in reduced strontium barium niobate

Electron transport mechanisms in reduced Sr 0.5 Ba 0.5 Nb 2 O 6 (SBN50) are investigated from ~100 to 955 K through an analysis of the electrical conductivity (σ) and the Seebeck coefficient (S) with respect to temperature (T). Notably, experimental evidence is presented that supports a scenario of Anderson localization below 600 K and carrier excitation across a mobility edge at higher temperature. As a relaxor ferroelectric, stoichiometric SBN has intrinsic disorder associated with both the distribution of Sr/Ba vacancies and the formation of polarized nanoregions. The removal of oxygen through reduction generates conduction electrons in SBN. At the lowest temperatures measured (100–155 K), the electrical conductivity exhibits a temperature dependence characteristic of variable range hopping, followed by a transition to small polaron hopping at intermediate temperatures (250–545 K). In both the variable range and small polaron hopping regimes, a semiconductor-like temperature dependence of the electrical conductivity ( dσ/dT > 0) was observed. However, above 615 K, dσ/dT decreases dramatically and eventually becomes metal-like ( dσ/dT < 0). Concomitantly, the Seebeck coefficient exhibits a linear dependence on lnT from 615 to 955 K with the same slope (~104 μ V/K) for both polycrystalline SBN50 and single crystalline SBN61 (both reduced), indicating a similar, constant density of states near the Fermi level for both compositions. Here, the application of Seebeck coefficient theory to this inherently disordered material reveals that the excitation of carriers across a mobility edge is likely responsible for the change in dσ/dT at high temperature. Such findings may have a significant impact in the field of conductive ferroelectrics.

36 MATERIALS SCIENCE↗

Lightning current detector

An apparatus for measuring the intensity of current produced in an elongated electrical conductive member by a lightning strike for determining the intensity of the lightning strike is presented. The apparatus includes an elongated strip of magnetic material that is carried within an elongated tubular housing. A predetermined electrical signal is recorded along the length of said elongated strip of magnetic material. One end of the magnetic material is positioned closely adjacent to the electrically conductive member so that the magnetic field produced by current flowing through said electrically conductive member disturbs a portion of the recorded electrical signal directly proportional to the intensity of the lightning strike.

Livermore, S. F.↗

Structure and thermoelectric properties of bismuth telluride—Carbon composites

Highlights: • Carbon nanotubes and amorphous carbon were introduced into bismuth telluride matrix. • Carbon additives led to an increase of a phonon part of thermal conductivity. • Carbon additives led to a decrease of an electric conductivity and Seebeck coeff. - Abstract: Carbon nanotubes and amorphous carbon have been introduced into a bismuth telluride matrix (0.15 and 0.30 wt.% ratio) to investigate the influence of the carbon on the composite’s thermoelectric properties. Composites with well-dispersed additives have been obtained by sonication and ball-milling methodology. Carbon nanotubes and an amorphous carbon addition led to a decrease in electric conductivity from 1120 S/cm to 77 S/cm. The absolute value of the Seebeck coefficient was found to be reduced, changing from −113 μV/K +2 μV/K, this is attributed to electron trapping by an amorphous carbon. For all investigated composites the phonon contribution of the thermal conductivity increased in comparison with a specimen without carbon additives.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The synthesis of conducting polymers for corrosion prevention

The formation of an electrically conducting form of polyaniline by the oxidative polymerization of aniline was studied. Optimum yield and conductivities were obtained by treating aniline in 2 molar hydrochloric acid at 0 to 5 C with ammonium persulfate in 1.15 mole ratio. The yield was 37.6 percent of theory and the conductivity of the product was 10.5 S/cm. This material was formulated into epoxy and acrylic coatings which were also electrically conductive.

Mattson, Guy C.↗

Identification of subsurface structures using electromagnetic data and shape priors

We consider the inverse problem of identifying large-scale subsurface structures using the controlled source electromagnetic method. To identify structures in the subsurface where the contrast in electric conductivity can be small, regularization is needed to bias the solution towards preserving structural information. We propose to combine two approaches for regularization of the inverse problem. In the first approach we utilize a model-based, reduced, composite representation of the electric conductivity that is highly flexible, even for a moderate number of degrees of freedom. With a low number of parameters, the inverse problem is efficiently solved using a standard, second-order gradient-based optimization algorithm. Further regularization is obtained using structural prior information, available, e.g., from interpreted seismic data. The reduced conductivity representation is suitable for incorporation of structural prior information. Such prior information cannot, however, be accurately modeled with a gaussian distribution. To alleviate this, we incorporate the structural information using shape priors. The shape prior technique requires the choice of kernel function, which is application dependent. We argue for using the conditionally positive definite kernel which is shown to have computational advantages over the commonly applied gaussian kernel for our problem. Numerical experiments on various test cases show that the methodology is able to identify fairly complex subsurface electric conductivity distributions while preserving structural prior information during the inversion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic structure and thermoelectric transport properties of the golden Th{sub 2}S{sub 3}-type Ti{sub 2}O{sub 3} under pressure

A lot of physical properties of Th{sub 2}S{sub 3}-type Ti{sub 2}O{sub 3} have investigated experimentally, hence, we calculated electronic structure and thermoelectric transport properties by the first-principles calculation under pressure. The increase of the band gaps is very fast from 30 GPa to 35 GPa, which is mainly because of the rapid change of the lattice constants. The total density of states becomes smaller with increasing pressure, which shows that Seebeck coefficient gradually decreases. Two main peaks of Seebeck coefficients always decrease and shift to the high doping area with increasing temperature under pressure. The electrical conductivities always decrease with increasing temperature under pressure. The electrical conductivity can be improved by increasing pressure. Electronic thermal conductivity increases with increasing pressure. It is noted that the thermoelectric properties is reduced with increasing temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Conductive methyl blue-functionalized reduced graphene oxide with excellent stability and solubility in water

Graphical abstract: MB-rGO was synthesized by making use of {pi} stacking and water-solubility of MB to assist the hydrazine mediated reduction of graphene oxide (GO) in aqueous solution. The resulting MB-rGO shows excellent solubility and stability in aqueous solution, and the electrical conductivity of MB-rGO is almost two orders of magnitude larger than that of GO. Highlights: Black-Right-Pointing-Pointer Methyl blue (MB) stacks onto the plane of reduced graphene oxide (rGO) by strong {pi}-{pi} interactions. Black-Right-Pointing-Pointer Sulfo groups of MB prevent rGO from aggregating by electrostatic and steric repulsions. Black-Right-Pointing-Pointer MB-functionalized rGO (MB-rGO) shows excellent solubility and stability in aqueous solution. Black-Right-Pointing-Pointer Electrical conductivity of MB-rGO is almost two orders of magnitude larger than that of GO. -- Abstract: {pi} stacking and water-solubility of methyl blue (MB) are expected to facilitate the hydrazine mediated reduction of graphene oxide (GO) in aqueous environment. Our newly obtained MB-functionalized reduced graphene oxide (MB-rGO) exhibited excellent solubility and stability in water. The results showed that the MB molecules stacked non-covalently onto the basal plane of rGO while the sulfo groups of MB prevented the rGO from aggregation. In addition, the better electrical conductivity of MB-rGO than that of GO was analyzed. This novel conductive MB-rGO should have promising applications in diverse nanotechnological areas, such as electronic and optoelectronic devices, photovoltaics, sensors, and microfabrication.

36 MATERIALS SCIENCE↗

Carbon Nanotube/Conductive Additive/Space Durable Polymer Nanocomposite Films for Electrostatic Charge Dissipation

Thin film membranes of space environmentally stable polymeric materials possessing low color/solar absorptivity (alpha) are of interest for potential applications on Gossamer spacecraft. In addition to these properties, sufficient electrical conductivity is required in order to dissipate electrostatic charge (ESC) build-up brought about by the charged orbital environment. One approach to achieve sufficient electrical conductivity for ESC mitigation is the incorporation of single wall carbon nanotubes (SWNTs). However, when the SWNTs are dispersed throughout the polymer matrix, the nanocomposite films tend to be significantly darker than the pristine material resulting in a higher alpha. The incorporation of conductive additives in combination with a decreased loading level of SWNTs is one approach for improving alpha while retaining conductivity. Taken individually, the low loading level of conductive additives and SWNTs is insufficient in achieving the percolation level necessary for electrical conductivity. When added simultaneously to the film, conductivity is achieved through a synergistic effect. The chemistry, physical, and mechanical properties of the nanocomposite films will be presented.

Smith, Joseph G., Jr.↗

PFLOTRAN-SIP: A PFLOTRAN Module for Simulating Spectral-Induced Polarization of Electrical Impedance Data

Spectral induced polarization (SIP) is a non-intrusive geophysical method that collects chargeability information (the ability of a material to retain charge) in the time domain or its phase shift in the frequency domain. Although SIP is a temporal method, it cannot measure the dynamics of flow and solute/species transport in the subsurface over long times (i.e., 10–100 s of years). Data collected with the SIP technique need to be coupled with fluid flow and reactive-transport models in order to capture long-term dynamics. To address this challenge, PFLOTRAN-SIP was built to couple SIP data to fluid flow and solute transport processes. Specifically, this framework couples the subsurface flow and transport simulator PFLOTRAN and geoelectrical simulator E4D without sacrificing computational performance. PFLOTRAN solves the coupled flow and solute-transport process models in order to estimate solute concentrations, which were used in Archie’s model to compute bulk electrical conductivities at near-zero frequency. These bulk electrical conductivities were modified while using the Cole–Cole model to account for frequency dependence. Using the estimated frequency-dependent bulk conductivities, E4D simulated the real and complex electrical potential signals for selected frequencies for SIP. These frequency-dependent bulk conductivities contain information that is relevant to geochemical changes in the system. This study demonstrated that the PFLOTRAN-SIP framework is able to detect the presence of a tracer in the subsurface. SIP offers a significant benefit over ERT in the form of greater information content. It provided multiple datasets at different frequencies that better constrained the tracer distribution in the subsurface. Consequently, this framework allows for practitioners of environmental hydrogeophysics and biogeophysics to monitor the subsurface with improved resolution.

54 ENVIRONMENTAL SCIENCES↗