Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Effective properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Quantum transport response of topological hinge modes

Electronic topological phases are typified by the conducting surface states that exist on the boundary of an insulating three-dimensional bulk. While the transport response of the two-dimensional surface states has been studied, the quantum response of the one-dimensional hinge modes has not been demonstrated. Here we provide evidence for quantum transport in gapless topological hinge states existing within the insulating bulk and surface energy gaps in the intrinsic topological insulator α-Bi 4 Br 4 . Our magnetoresistance measurements reveal pronounced Aharonov–Bohm oscillations that are periodic in h/e (where h denotes Planck’s constant and e is the electron charge). The observed periodicity evinces quantum interference of electrons circumnavigating around the hinges. We also demonstrate that the h/e oscillations evolve as a function of magnetic field orientation, following the interference paths along the hinge modes that are allowed by topology and symmetry. Furthermore, our findings reveal the quantum transport response of topological hinge modes with both topological nature and quantum coherence, which can eventually be applied to the development of efficient topological electronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Multireference diffusion Monte Carlo reaches 2D materials

Abstract Quantum confinement in 2D materials strongly enhances electronic correlation effects. Therefore, predicting the properties of these unique materials, with both a high level of accuracy and computational efficiency, without relying on adjustable parameters or functionals, remains an outstanding theoretical challenge. The majority of theoretical studies are based on the approximations of density functional theory (DFT). The reliability of DFT predictions are heavily dependent on the choice of an approximated exchange-correlation functional. Here, we estimate the magnitude of impact of correlation on the total energy for the quintessential 2D material, graphene, by performing and comparing state-of-the-art selected CI and quantum Monte Carlo extrapolated calculations for a single unit cell at the$$\Gamma$$point. We demonstrate that Self-Healing Diffusion Monte Carlo (SHDMC) obtains a very compact, but high-quality wavefunction for this system that lacks the strong basis set dependence displayed by state of the art quantum chemistry methods. The SHDMC wavefunction is of higher quality compared to that obtained from sCI, in the same orbital basis, while being$$\sim$$ 1000 times smaller in terms of determinant count compared to sCI. We also demonstrate that extrapolating SHDMC results to the infinite determinant limit compares extremely well with complete basis set extrapolated sCI. Our work paves the way for future validation of SHDMC applied to challenging 2D materials.

Science & Technology - Other Topics↗
DOE OSTI2021

Microwave impedance microscopy and its application to quantum materials

We report materials in which quantum mechanical effects lead to novel properties on the macroscopic scale are of interest both fundamentally and for applications. For such quantum materials, the ability to measure local conductivity and permittivity with nanoscale spatial resolution, minimal sample preparation, in a contact-free fashion and under a wide range of external conditions (such as temperature and magnetic field) is highly desirable. To this end, microwave impedance microscopy, a scanning probe technique that measures tip–sample admittance (inverse of impedance) in a non-contact geometry at microwave frequencies, has matured over the past decade to become a tool that can do just that. This Technical Review describes its fundamental working principles and practical implementations, discusses its application to a wide range of quantum materials, including correlated, topological and 2D van der Waals materials, and outlines future opportunities in expanding the capabilities of microwave impedance microscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Electron–phonon interaction and ultrafast photoemission from doped monolayer MoS 2

We have examined the effect of electron–phonon coupling on photoluminescence and ultrafast response of electron doped monolayer MoS2, using a combination of density functional theory, time dependent density functional theory, and many-body theory. For small doping (~1–3%) of interest here, the electron–phonon coupling parameter is modest (~0.1–0.2) but its effect on the emissive properties and response of the system to femtosecond (fs) laser pulses is striking. We find an ultrafast (fs) relaxation of the electronic subsystem as well as a high fluence of visible light emission induced by electron phonon interaction. Together with high carrier mobility, these features of monolayer MoS2 may be relevant for optoelectronic technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Effect of growth dynamics on the structural, photophysical and pseudocapacitance properties of famatinite copper antimony sulphide colloidal nanostructures (including nanosheets)

Facile phase selective synthesis of copper antimony sulphide (CAS) nanostructures is important because of their tunable photoconductive and electrochemical properties. In this study, off-stoichiometric famatinite phase CAS (fCAS) quasi-spherical and quasi-hexagonal colloidal nanostructures (including nanosheets) of sizes, 2.4–18.0 nm were grown under variable conditions of temperature (60–200 °C), time and oleylamine capping ligand concentration using copper(II) acetylacetonate and antimony(III) diethyldithiocarbamate precursors. Data from powder X-ray diffraction, Raman spectroscopy and high-resolution scanning/transmission electron microscopy confirm the tetragonal structure of the famatinite phase. X-ray photoelectron spectroscopy, transmission electron microscopy and scanning electron microscopy-energy dispersive X-ray spectroscopy data suggest a correlation of particle size, morphology and composition of the off-stoichiometric fCAS nanostructures with growth temperature and time, and oleylamine concentration. The off-stoichiometric Cu 3-a Sb 1+b S 4±c (a, b, c – mole fractions) nanostructures being severely copper-deficient and antimony-rich, exhibit shallow-lying acceptor copper vacancy states, deep-lying donor states of antimony interstitials, sulphur vacancies and antimony-copper antisites and shallow-lying acceptor surface trapping states. Further, these electronic states are likely implicated in tunable UV-visible absorption and bandgaps between 2.3 and 2.8 eV, and broad visible-NIR photoluminescence with fast recombination of radiative lifetimes between 0.2 and 6.2 ns, confirmed from absorption, steady-state and time-resolved photoluminescence spectroscopies. Additionally, cyclic voltammetry and electrochemical impedance spectroscopy confirm that electrodes of the fCAS nanostructures display slightly variable pseudocapacitance of charge-storage primarily via possible sodium ion intercalation with a high specific capacitance of ~84 F g -1 obtained at a scan rate of 5 mV s -1 . Overall, these results show the influence of composition, in particular point defects, phase quality and morphology on the optical and pseudocapacitance properties of fCAS nanostructures, suitable as solar absorbers or electrodes for energy storage devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Equation of state for 304L stainless steel

Here, a new equation of state for 304L stainless steel has been constructed and entered in the Los Alamos National Laboratory SESAME database with material ID 4273. The equation of state is based on a multiphase approach. The solid and liquid phases were fitted to available experimental data for thermal expansion, heat capacity, and shock Hugoniot, as well as to data from density functional theory calculations of the cold curve and quantum molecular dynamics of the liquid regime. The electronic thermal contribution over the entire equation of state range is based on Tartarus (Green’s functions) average atom calculations. For this low-carbon stainless steel both the density functional and electronic thermal calculations are comprised of 19 wt% Cr, 10 wt% Ni, and the remainder Fe.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A physically unclonable function using NV diamond magnetometry and micromagnet arrays

A physically unclonable function (PUF) is an embedded hardware security measure that provides protection against counterfeiting. In this article, we present our work on using an array of randomly magnetized micrometer-sized ferromagnetic bars (micromagnets) as a PUF. We employ a 4μm thick surface layer of nitrogen-vacancy (NV) centers in diamond to image the magnetic field from each micromagnet in the array, after which we extract the magnetic polarity of each micromagnet using image analysis techniques. Finally, after evaluating the randomness of the micromagnet array PUF and the sensitivity of the NV readout, we conclude by discussing the possible future enhancements for improved security and magnetic readout.

Electromagnetism↗
DOE OSTI2020

Carrier recombination and diffusion in high-purity diamond after electron irradiation and annealing

Carrier-transport mechanisms are studied in high-purity diamond irradiated with 6 MeV electrons in the dose range of 10 12 –10 16 cm -2 and annealed at different temperatures up to 1450°C. Lifetimes and diffusion coefficients are extracted using two pump–probe techniques based on free-carrier absorption and transient-grating principles and then correlated with the corresponding defect evolution from spectroscopic measurements. Furthermore, the neutral monovacancy is revealed as the main carrier recombination center in the as-irradiated diamond, providing bipolar carrier lifetimes of a few nanoseconds at the highest irradiation dose. Carrier-capture cross sections are reduced during annealing as vacancies aggregate into divacancies at ≤1000°C and extended vacancy clusters at 1450°C.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Internal Insulation and Corrosion Control of Molten Chloride Storage Tanks

The National Renewable Energy Laboratory (NREL) is leading a multi-national team to validate the potential of a chloride-based molten-salt system that uses a ternary blend of MgCl2/KCl/NaCl to provide higher temperature thermal energy storage capability, thereby allowing for higher efficiency in the power block of next-generation concentrating solar power systems. While higher thermal stability, greater operating temperature, and a more efficient power cycle are possible, the molten chlorides present several unique challenges, including the design of internal liners to prevent the corrosion and thermal stress of alloy tank shells. This work discusses issues and potential solutions related to containment of molten chloride salt, specifically the design of the molten salt storage tanks.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2021

Analytic evaluation of energy first derivatives for spin–orbit coupled-cluster singles and doubles augmented with noniterative triples method: General formulation and an implementation for first-order properties

The paper reports a formulation of analytic energy first derivatives for the coupled-cluster singles and doubles augmented with noniterative triples [CCSD(T)] method with spin–orbit coupling included at the orbital level and an implementation for evaluation of first-order properties. Here, the new development extends the applicability of relativistic coupled cluster methods for heavy-element chemistry and spectroscopy. Benchmark calculations of first-order properties including dipole moments and electric-field gradients using the corresponding exact two-component property integrals are presented for heavy-element containing molecules to demonstrate the usefulness of the present analytic scheme.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Compositional and phase dependence of elastic modulus of crystalline and amorphous Hf 1- x Zr x O 2 thin films

The elastic moduli of amorphous and crystalline atomic layer-deposited Hf 1-x Zr x O 2 (HZO, x = 0, 0.31, 0.46, 0.79, 1) films prepared with TaN electrodes on silicon substrates were investigated using picosecond acoustic measurements. The moduli of the amorphous films were observed to increase between 211 ± 6 GPa for pure HfO 2 and 302 ± 9 GPa for pure ZrO 2 . In the crystalline films, it was found that the moduli increased upon increasing the zirconium composition from 248 ± 6 GPa for monoclinic HfO 2 to 267 ± 9 GPa for tetragonal ZrO 2 . Positive deviations from this increase were observed for the Hf 0.69 Zr 0.31 O 2 and Hf 0.54 Zr 0.46 O 2 compositions, which were measured to have moduli of 264 ± 8 GPa and 274 ± 8 GPa, respectively. These two compositions contained the largest fractions of the ferroelectric orthorhombic phase, as assessed from polarization and diffraction data. The biaxial stress states of the crystalline films were characterized through sin 2 (ψ) x-ray diffraction analysis. The in-plane stresses were all found to be tensile and observed to increase with the increasing zirconium composition, between 2.54 ± 0.6 GPa for pure HfO 2 and 5.22 ± 0.5 GPa for pure ZrO 2 . The stresses are consistent with large thermal expansion mismatches between the HZO films and silicon substrates. Furthermore, these results demonstrate a device-scale means to quantify biaxial stress for investigation on its effect on the ferroelectric properties of hafnia-based materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Suppression of thermal conductivity and electronic correlations in Fe 1– x Ru x Sb 2 (0 ≤ x ≤ 0.6)

We present simultaneous suppression of FeSb 2 thermal conductivity and electronic correlations in Fe 1– x Ru x Sb 2 (0 ≤ x ≤ 0.6) single crystal alloys. Small energy gap Δ 1 in Kondo-insulator-like semiconductor FeSb 2 associated with impurity in-gap state increases whereas the intrinsic bandgap Δ 2 decreases upon Ru substitution on Fe atomic site. Thermopower is suppressed along with the intrinsic bandgap and with the thermal conductivity. The more delocalized 4 d character of atomic orbital of Ru brings suppression of electronic correlations, but also an increase in impurity density which reduces phonon mean free path and surface scattering length. Our results indicate a range of Ru doping x where nanostructuring could be used to suppress thermal conductivity further, potentially toward the amorphous limit.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Pressure-induced spin crossover in a Fe 78 Si 9 B 13 metallic glass

The pressure effect on structures and properties of a Fe 78 Si 9 B 13 metallic glass was investigated by in situ high-pressure synchrotron Fe Kβ x-ray emission spectroscopy and x-ray diffraction, and electrical resistivity measurements up to ~51 GPa. The study reveals a reversible and continuous pressure-induced high- to low-spin crossover of Fe atoms in an amorphous structure. The changes of the local spin moment can be scaled to match its average atomic distance shrinkage very well during compression. The crossover of electronic spin states in the Fe 78 Si 9 B 13 metallic glass resembles that of typical crystalline Fe-bearing materials but without a sharp atomic volume collapse and an abrupt electrical resistivity jump. Furthermore, these findings could help guide applications of Fe-based metallic glasses as a soft ferromagnetic material at extreme conditions and also improve our understanding of magnetism and coupling of its changes with disordered atomic structures and other properties in metallic glasses.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A reactive flow model for the 3,3'-diamino-4,4'-azoxyfurazan based plastic bonded explosive (PBX 9701)

Here, this paper describes the calibration of the Arrhenius Wescott–Stewart–Davis (AWSD) reactive flow model for the recently developed high explosive PBX 9701, which consists of 97% 3,3'-diamino-4,4'-azoxyfurazan (DAAF) and 3% FK-800 binder by weight. DAAF-based explosive formulations have several desirable qualities as they are relatively insensitive to non-shock insults but have higher performance than triaminotrinitrobenzene based formulations. Equations of state for the explosive reactants and products are calibrated using a combination of existing and new experimental data and theoretical calculations. The AWSD rate law calibration utilizes both one-dimensional shock-to-detonation and multidimensional rate stick experiments to capture the shock initiation and propagating detonation regimes. Validation of the calibrated model is demonstrated through comparison with recent gas-gun experiments.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2022

Stoichiometry-dependent surface electronic structure of SrTiO3 films grown by hybrid molecular beam epitaxy

We investigate the surface electronic structure of SrTiO3 (STO) films grown by a hybrid molecular beam epitaxy that are both stoichiometric and nonstoichiometric by means of x-ray photoelectron spectroscopy and electron energy loss spectroscopy. Increasing the fraction of the surface that is terminated with an SrO layer is correlated with a decrease in the chemical potential whereby the valence band maximum moves closer to the Fermi level, but without a significant change in the bandgap. Inasmuch as SrO-terminated STO (001) has previously been shown to act as an electron scavenger in which carriers from the bulk are trapped, we argue that the high fraction of SrO in the terminal layer is what lowers the chemical potential in Sr-rich STO. Our experimental results provide important insights into various physical phenomena that can occur on STO (001) surfaces and their effect on bulk electronic properties.

Lee, Dooyong (ORCID:0000000175361677)↗