Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXHAUST”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Exhaust Nozzle Plume Effects on Sonic Boom Test Results for Vectored Nozzles

Reducing or eliminating the operational restrictions of supersonic aircraft over populated areas has led to extensive research at NASA. Restrictions were due to the disturbance of the sonic boom, caused by the coalescence of shock waves formed off the aircraft. Recent work has been performed to reduce the magnitude of the sonic boom N-wave generated by airplane components with a focus on shock waves caused by the exhaust nozzle plume. Previous Computational Fluid Dynamics (CFD) analysis showed how the shock wave formed at the nozzle lip interacts with the nozzle boat-tail expansion wave. An experiment was conducted in the 1- by 1-foot Supersonic Wind Tunnel (SWT) at the NASA Glenn Research Center. Results show how the shock generated at the nozzle lip affects the near field pressure signature, and thereby the potential sonic boom contribution for a nozzle at vector angles from 3 to 8 . The experiment was based on the NASA F-15 nozzle used in the Lift and Nozzle Change Effects on Tail Shock experiment, which possessed a large external boat-tail angle. In this case, the large boat-tail angle caused a dramatic expansion, which dominated the near field pressure signature. The impact of nozzle vector angle and nozzle pressure ratio are summarized.

Castner, Raymond↗

Empirical Scaling Laws of Rocket Exhaust Cratering

When launching or landing a space craft on the regolith of a terrestrial surface, special attention needs to be paid to the rocket exhaust cratering effects. If the effects are not controlled, the rocket cratering could damage the spacecraft or other surrounding hardware. The cratering effects of a rocket landing on a planet's surface are not understood well, especially for the lunar case with the plume expanding in vacuum. As a result, the blast effects cannot be estimated sufficiently using analytical theories. It is necessary to develop physics-based simulation tools in order to calculate mission-essential parameters. In this work we test out the scaling laws of the physics in regard to growth rate of the crater depth. This will provide the physical insight necessary to begin the physics-based modeling.

Donahue, Carly M.↗

Rocket Exhaust Cratering: Lessons Learned from Viking and Apollo

During the Apollo and Viking programs NASA expended considerable effort to study the cratering of the regolith when a rocket launches or lands on it. That research ensured the success of those programs but also demonstrated that cratering will be a serious challenge for other mission scenarios. Unfortunately, because three decades have elapsed since NASA last performed a successful retro-rocket landing on a large planetary body - and ironically because Apollo and Viking were successful at minimizing the cratering effects - the space agency has a minimized sense of the seriousness of the issue. The most violent phase of a cratering event is when the static overpressure of the rocket exhaust exceeds the bearing capacity of the soil. This bearing capacity failure (BCF) punches a small and highly concave cup into the surface. The shape of the cup then redirects the supersonic jet - along with a large flux of high-velocity debris - directly toward the spacecraft. This has been observed in terrestrial experiments but never quantified analytically. The blast from such an event will be more than just quantitatively greater than the cratering that occurred in the Apollo and Viking programs. It will be qualitatively different, because BCF had been successfully avoided in all those missions. In fact, the Viking program undertook a significant research and development effort and redesigned the spacecraft specifically for the purpose of avoiding BCF [1]. (See Figure 1.) Because the Apollo and Viking spacecraft were successful at avoiding those cratering effects, it was unnecessary to understand them. As a result, the physics of a BCF-driven cratering event have never been well understood. This is a critical gap in our knowledge because BCF is unavoidable in the Martian environment with the large landers necessary for human exploration, and in Lunar landings it must also be addressed because it may occur depending upon the design specifics of the spacecraft and the weakening of the regolity by gas diffusion.

Metzger, Philip T.↗

Jet Engine Exhaust Nozzle Flow Effector

A jet engine exhaust nozzle flow effector is a chevron formed with a radius of curvature with surfaces of the flow effector being defined and opposing one another. At least one shape memory alloy (SMA) member is embedded in the chevron closer to one of the chevron's opposing surfaces and substantially spanning from at least a portion of the chevron's root to the chevron's tip.

Turner, Travis L.↗

Aircraft Engine Exhaust Nozzle System for Jet Noise Reduction

The aircraft exhaust engine nozzle system includes a fan nozzle to receive a fan flow from a fan disposed adjacent to an engine disposed above an airframe surface of the aircraft, a core nozzle disposed within the fan nozzle and receiving an engine core flow, and a pylon structure connected to the core nozzle and structurally attached with the airframe surface to secure the engine to the aircraft.

Thomas, Russell H.↗

Hybrid Exhaust Component

An exhaust includes a wall that has a first composite material having a first coefficient of thermal expansion and a second composite material having a second coefficient of the thermal expansion that is less than the first coefficient of thermal expansion.

Pelletier, Gerard D.↗

Retro Rocket Motor Self-Penetrating Scheme for Heat Shield Exhaust Ports

A preliminary scheme was developed for base-mounted solid-propellant retro rocket motors to self-penetrate the Orion Crew Module heat shield for configurations with the heat shield retained during landings on Earth. In this system the motors propel impactors into structural push plates, which in turn push through the heat shield ablator material. The push plates are sized such that the remaining port in the ablator material is large enough to provide adequate flow area for the motor exhaust plume. The push plate thickness is sized to assure structural integrity behind the ablative thermal protection material. The concept feasibility was demonstrated and the performance was characterized using a gas gun to launch representative impactors into heat shield targets with push plates. The tests were conducted using targets equipped with Fiberform(R) and PICA as the heat shield ablator material layer. The PICA penetration event times were estimated to be under 30 ms from the start of motor ignition. The mass of the system (not including motors) was estimated to be less than 2.3 kg (5 lbs) per motor. The configuration and demonstrations are discussed.

landing system↗

MMS Observations of Electron-Scale Filamentary Currents in the Reconnection Exhaust and Near the X Line

We report Magnetospheric Multiscale observations of macroscopic and electron-scale current layers in asymmetric reconnection. By intercomparing plasma, magnetic, and electric field data at multiple crossings of a reconnecting magnetopause on 22 October 2015, when the average interspacecraft separation was approximately 10 km, we demonstrate that the ion and electron moments are sufficiently accurate to provide reliable current density measurements at 30ms cadence. These measurements, which resolve current layers narrower than the interspacecraft separation, reveal electron-scale filamentary Hall currents and electron vorticity within the reconnection exhaust far downstream of the X line and even in the magnetosheath. Slightly downstream of the X line, intense (up to 3 μA/m2) electron currents, a super-Alfvenic outflowing electron jet, and nongyrotropic crescent shape electron distributions were observed deep inside the ion-scale magnetopause current sheet and embedded in the ion diffusion region. These characteristics are similar to those attributed to the electron dissipation/diffusion region around the X line.

Phan, T. D.↗

Using Formal to Exhaustively Determine Unsafe Clock Ratios Between Asynchronous Blocks

In this paper we will show how formal property checking can be used to exhaustively sweep the range of allowable clock ratios between any two blocks to determine if their correct operation is maintained. First, we obtain, or create, models of the sending and receiving blocks (in either VHDL or Verilog). After basic functional validation of these models, we then write the property set to reflect the functional requirements of each block. As the clocks between them allow for a range of frequency ratios, we employ the formal analysis principal of nondeterminism to lock-on to a particular supported frequency ratio and prove that the functional requirements are still met.

Hendrickson, Eric↗

Physical Simulation of Rocket Exhaust Aerodynamics Using Heated Ethane: Conceptual Foundations

Heated ethane (C2H6) has been proposed as an alternative to inert gases for use as a motive fluid in the experimental simulation of rocket exhaust plumes. By adjusting stagnation temperature, the isentropic exponent of ethane can be tuned to approximate those produced by common rocket propellants including hydrogen, hypergols, alcohols, and hydrocarbons. As a result, ethane can be made to follow a nozzle expansion process which is nearly identical to realistic rocket engine flow fields. Additionally, its high auto-ignition temperature and resistance to condensation enable the testing of expansion ratios much larger than conventional inertgas testing. NASA SSC has performed quasi-one-dimensional analyses using the Chemical Equilibrium with Applications (CEA) code as a preliminary means to compare flow fields produced by non-reacting ethane to those of reacting combustion products. A LO2/LH2 rocket engine operating at a chamber pressure of 5.0 MPa and a mixture ratio of 6.1 was used as an example case to demonstrate ethane’s efficacy as a simulant. Errors for key similarity parameters were compared to legacy cold-flow test methods. Additional errors induced by machining tolerances and chemical impurities were also examined. Results suggest that at a 3% geometric scale and ~500 K ethane stagnation temperature, an error of less than 2.5% throughout the flow field is realistically achievable along the dimensions of Mach number, Reynolds number, pressure ratio, and isentropic exponent. The development of an experimental test bed for validation of this configuration is currently underway.

Jones, Daniel R.↗

Physical Simulation Of Rocket Exhaust Aerodynamics Using Heated Ethane: Prototypical Experiments

An inaugural experimental investigation into the use of heated ethane as a motive fluid for subscale simulation of rocket exhaust plume aerodynamics has been conducted. A small, self-contained, hydrocarbon aerodynamics test stand was designed and fabricated for this purpose. Testing was performed on an aerodynamic system comprised of a 77:1 upper stage nozzle contour coupled with a passive second-throat supersonic diffuser, specifically selected for its known LOX/GH2 hot-fire performance and complex shock structure. Effects of ethane purity and stagnation temperature on the accuracy of flow field replication have been examined. All major flow features present in hot-fire tests were reproduced in heated ethane with start and unstart pressure ratio errors of approximately +4% and -5%, respectively. Steady-state test cell pressure ratio errors of ±0.5% were shown to be readily achievable when the stagnation temperature was well-controlled. Ambient-temperature nitrogen testing was also conducted for the purpose of direct comparison of the ethane method to conventional cold-flow techniques. However, its higher isentropic exponent prevented the diffuser from achieving start.

rocket↗

Modeling Fuel Droplets in RCS Engine Exhaust Plume

Thrusters are used to maneuver spacecraft in space. Spacecraft maneuvering and attitude control is achieved by accelerating the high temperature and pressure exhaust gases, which are the result of chemical combustion in the case of chemical engines, through the rocket nozzle. Following the end of the nozzle a plume is created containing combustion gases and high velocity droplets of unburnt propellant that with time can erode the surfaces it strikes. A simulation that can accurately model a thruster’s plume can help us reduce the erosion of components struck by the plume. The creation of this simulation can be broken into several parts, and this paper focuses on finding out what distribution of particles along a plane in the nozzle, where combustion can be assumed to be complete, creates the observed particle distribution in the plume. Findings show that unburnt droplets are mostly concentrated in the center of the nozzle or uniformly dispersed within the nozzle.

CFD↗

Heat pipes and use of heat pipes in furnace exhaust

An array of a plurality of heat pipe are mounted in spaced relationship to one another with the hot end of the heat pipes in a heated environment, e.g. the exhaust flue of a furnace, and the cold end outside the furnace. Heat conversion equipment is connected to the cold end of the heat pipes.

Polcyn, Adam D↗

Variable-geometry turbocharger with asymmetric divided volute for engine exhaust gas pulse optimization

A turbine assembly for a variable-geometry turbocharger includes a turbine housing defining a divided volute having first and second scrolls, wherein the first scroll has a substantially smaller volume than the second scroll. The first scroll feeds exhaust gas to a first portion of a turbine wheel upstream of the throat of the wheel, while the second scroll feeds gas to a second portion of the wheel at least part of which is downstream of the throat. Flow from the second scroll is regulated by a sliding piston. The first scroll can be optimized for low-flow conditions such that the turbocharger can operate effectively like a small fixed-geometry turbocharger when the piston is closed. The turbine housing defines an inlet that is divided by a dividing wall into two portions respectively feeding gas to the two scrolls, a leading edge of the dividing wall being downstream of the inlet mouth.

Serres, Nicolas↗

Catalysts to reduce NO.sub.x in an exhaust gas stream and methods of preparation

Catalysts, systems and methods are described to reduce NO.sub.x emissions of an internal combustion engine. In one embodiment, an emissions treatment system for an exhaust stream is provided having a catalyst comprising silver and a platinum group metal on a particulate alumina support, the atomic fraction of the platinum group metal being less than or equal to about 0.25. Methods of manufacturing catalysts are described in which silver is impregnated on alumina particles.

33 ADVANCED PROPULSION SYSTEMS↗

Dynamic instabilities in spark-ignited combustion engines with high exhaust gas recirculation

We propose a cycle-resolved dynamic model for combustion instabilities in spark-ignition engines operating with high levels of exhaust gas recirculation (EGR). High EGR is important for increasing fuel efficiency and implementing advanced low-emission combustion modes such as homogenous charge compression ignition (HCCI). We account for the complex combustion response to cycle-to-cycle feedback by utilizing a global probability distribution that describes the pre-spark state of in-cylinder fuel mixing. The proposed model does a good job of simulating combustion instabilities observed in both lean-fueling engine experiments and in experiments where nitrogen dilution is used to simulate some of the combustion inhibition of EGR. When used to simulate high internal EGR operation, the model exhibits a range of global bifurcations and chaos that appear to be very robust. We use the model to show that it should be possible to reduce high EGR combustion instabilities by switching from internal to external EGR. We also explain why it might be helpful to deliberately stratify the fuel in the pre-spark gas mixture. It might be possible to extend the simple approach used in this model to other chemical reaction systems with spatial inhomogeneity.

33 ADVANCED PROPULSION SYSTEMS↗

Exhaust system having a gold-platinum group metal catalyst

A method of providing an exhaust treatment device is disclosed. The method includes applying a catalyst including gold and a platinum group metal to a particulate filter. The concentration of the gold and the platinum group metal is sufficient to enable oxidation of carbon monoxide and nitric oxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diesel emission reduction using internal exhaust gas recirculation

A method for controlling combustion in a direct-injection diesel engine includes monitoring a crankshaft rotational position of a cylinder of the engine, monitoring an engine load, determining an intake stroke within the cylinder based upon the crankshaft rotational position, and when the engine load is less than a threshold engine load, opening an exhaust valve for the cylinder during a portion of the intake stroke.

33 ADVANCED PROPULSION SYSTEMS↗