Results for “EQUATIONS OF MOTION” — Page 57

NASA NTRS1984

A two-dimensional analysis of laser heat addition in converging nozzles

The two-dimensional equations of motion describing the interaction between a laser beam and a flowing gas are considered. An implicit numerical scheme is used to solve these equations for unchoked flow through a converging-diverging nozzle. Separate grids are used for the fluid dynamics and the radiation equations. The effects of beam focusing and cross-beam intensity profiles are included. The calculations are based upon real gas properties for all quantities except the gas absorptivity, which is taken as a constant. The solutions contain the expected hot central core region with cool gas near the walls. This results in steep temperature gradients in both the streamwise and cross-stream directions. The absorption zone acts as a blockage in the nozzle causing a nonuniform velocity profile at the inlet and an overall decrease in mass flow. The absorption region also forces the streamlines to move away from the axis of symmetry, although this effect is not strong.

Molvik, G. A.↗

NASA NTRS1986

Predicting the Dynamic Behavior of High-Speed Roller Bearings

Computer program developed for solving nonlinear differential equations of motion of high-speed, lightly loaded, cylindrical roller bearing. Program organized into three major parts: Main program, controls input and output; differential equation solver; and subroutines, used to evaluate vector function. Program has capability of performing either twodimensional or three-dimensional simulation.

Conry, T. F.↗

NASA NTRS1987

Force and moment rotordynamic coefficients for pump-impeller shroud surfaces

Governing equations of motion are derived for a bulk-flow model of the leakage path between an impeller shroud and a pump housing. The governing equations consist of a path-momentum, a circumferential - momentum, and a continuity equation. The fluid annulus between the impeller shroud and pump housing is assumed to be circumferentially symmetric when the impeller is centered; i.e., the clearance can vary along the pump axis but does not vary in the circumferential direction. A perturbation expansion of the governing equations in the eccentricity ratio yields a set of zeroth and first-order governing equations. The zeroth-order equations define the leaking rate and the circumferential and path velocity distributions and pressure distributions for a centered impeller position. The first-order equations define the perturbations in the velocity and pressure distributions due to either a radial-displacement perturbation or a tilt perturbation of the impeller. Integration of the perturbed pressure and shear-stress distribution acting on the rotor yields the reaction forces and moments acting on the impeller face.

Childs, Dara W.↗

NASA NTRS1987

Dynamic analysis of satellites with deployable hinged appendages

The nonlinear equations of motion determining the planar dynamical behavior of an orbiting satellite deploying both one and two rigid appendages have been formulated using Lagrange's equations. The analysis accounts for large angle rotations, Coriolis effects, and the gravitational gradient, and the resulting coupled governing equations are integrated numerically. The analysis is applied to the Space Shuttle based deployment of rigid truss-like members, and results show that spacecraft inertia parameters, appendage mass and length, deployment velocity, and initial conditions all influence the system response. It is found that the resulting librational movement is related to the size of the deployment payload, and that gravitational forces lead to vehicle stabilization.

Oakes, Kevin F.↗

NASA NTRS1987

User's manual for LINEAR, a FORTRAN program to derive linear aircraft models

This report documents a FORTRAN program that provides a powerful and flexible tool for the linearization of aircraft models. The program LINEAR numerically determines a linear system model using nonlinear equations of motion and a user-supplied nonlinear aerodynamic model. The system model determined by LINEAR consists of matrices for both state and observation equations. The program has been designed to allow easy selection and definition of the state, control, and observation variables to be used in a particular model.

Duke, Eugene L.↗

NASA NTRS1978

Random motion analysis of flexible satellite structures

A singular perturbation formulation is used to study the responses of a flexible satellite when random measurement errors can occur. The random variables, at different instants of time, are assumed to be uncorrelated. Procedures for obtaining maxima and minima are described, and a variation of the linear method is developed for the formal solution of the two-point boundary-value problems represented by the variational equations. Random and deterministic solutions for the structural position coordinates are studied, and an analytic algorithm for treating the force equation of motion is developed. Since the random system indicated by the variational equation will always be asymptotically unstable, any analysis of stability must be based on the deterministic system.

Huang, T. C.↗

NASA NTRS2002

Small Particle Response to Fluid Motion using Tethered Particles to Simulate Microgravity

This paper reports on ground based work conducted to support the Spaceflight Definition project SHIVA (Spaceflight Holography Investigation in a Virtual Apparatus). SHIVA will advance our understanding of the movement of a particle in a fluid. Gravity usually dominates the equations of motion, but in microgravity as well as on earth other terms can become important. Before two members of our team found an analytical solution of the equations, numerical methods and/or neglecting terms were required. The general solution predicts that the usually neglected history term becomes important when the characteristic viscous time is in the same order as the vibration period and peaks when the two times are equal. In this case three force terms, the Stokes drag, the added mass, and the history drag must all be included in predicting particle movement. We also developed diagnostic recording methods using holography to save all of the particle field data, allowing the experiment to essentially be transferred from space back to earth in what we call the "virtual apparatus". Using state-of-the-art methods in holography we will quantify the three-dimensional motion of sets of particles, allowing us to test and apply the new analytical solutions. The motion of particles up to 4 mm in diameter in a fluid that oscillates at frequencies up to 100 Hz with amplitudes up to 200 microns is being examined. Ground studies to support the flight development program have employed various schemes to simulate microgravity. One of the most reliable and meaningful methods uses spheres tethered to a fine hair suspended in the fluid. We have also investigated particles with nearly neutral buoyancy. Recordings are made at the peak amplitudes of vibration of the cell providing a measure of the ratio of fluid to particle amplitude. The experiment requires precise location of the particle at the time of recording. The hologram of the particle provides microscopic images of the particle that are used for finding the position with an accuracy of a few microns. To make the experiment more versatile, the spaceflight system will record holograms both on film and electronically. The electronic holograms can be downlinked providing real time data. Results of the ground experiments, the flight experiment design, and data analysis procedures are reported.

Trolinger, J. D.↗

NASA NTRS2002

Small Particle Response to Fluid Motion using Tethered Particles to Simulate Microgravity

This paper reports on ground based work conducted to support the Spaceflight Definition project SHIVA (Spaceflight Holography Investigation in a Virtual Apparatus). SHIVA will advance our understanding of the movement of a particle in a fluid. Gravity usually dominates the equations of motion, but in microgravity as well as on earth other terms can become important. Before two members of our team found an analytical solution of the equations, numerical methods and/or neglecting terms were required. The general solution predicts that the usually neglected history term becomes important when the characteristic viscous time is in the same order as the vibration period and peaks when the two times are equal. In this case three force terms, the Stokes drag, the added mass, and the history drag must all be included in predicting particle movement. We also developed diagnostic recording methods using holography to save all of the particle field data, allowing the experiment to essentially be transferred from space back to earth in what we call the "virtual apparatus". Using state-of-the-art methods in holography we will quantify the three-dimensional motion of sets of particles, allowing us to test and apply the new analytical solutions. The motion of particles up to 4 mm in diameter in a fluid that oscillates at frequencies up to 100 Hz with amplitudes up to 200 microns is being examined. Ground studies to support the flight development program have employed various schemes to simulate microgravity. One of the most reliable and meaningful methods uses spheres tethered to a fine hair suspended in the fluid. We have also investigated particles with nearly neutral buoyancy. Recordings are made at the peak amplitudes of vibration of the cell providing a measure of the ratio of fluid to particle amplitude. The experiment requires precise location of the particle at the time of recording. The hologram of the particle provides microscopic images of the particle that are used for finding the position with an accuracy of a few microns. To make the experiment more versatile, the spaceflight system will record holograms both on film and electronically. The electronic holograms can be downlinked providing real time data. Results of the ground experiments, the flight experiment design, and data analysis procedures are reported.

Trolinger, J. D.↗

NASA NTRS2005

Turbomachinery Application of Lagrangian Dynamics to the Motion of Continuous Discrete Rotors

The stability/instability condition of a turbine rotor with axisymmetric supports is determined in the presence of gyroscopic loads and rub-induced destabilizing forces. A modal representation of the turbine engine is used, with one mode in each of the vertical and horizontal planes. The use of non-spinning rotor modes permits an explicit treatment of gyroscopic effects. The two linearized modal equations of motion of a rotor with axisymmetric supports are reduced to a single equation in a complex variable. The resulting eigenvalues yield explicit expressions at the stability boundary, for the whirl frequency as well as the required damping in the presence of the available rub-induced destabilization. Conversely, the allowable destabilization in the presence of the available damping is also given.

Source record↗

DOE OSTI2023

Covariant classical charged particle motion in a plane electromagnetic wave revisited

We revisit the covariant formulation of a charged particle’s motion under the influence of a plane electromagnetic wave in classical picture. In the first case, we reproduce Meyer’s result by solving relativistic equation of motion ignoring radiation reaction in vacuum assuming zero mass approximation or null vector case ($k^µk_µ = k^2 = 0$). Then, we extend this approach to include the medium effects as perturbations in the propagation of electromagnetic wave (i. e. $k^2 ≠ 0$) and explore the effects of these perturbations in mass shift of the particle.

43 PARTICLE ACCELERATORS↗

NASA NTRS1980

Analysis of the Rim Inertial Measuring System (RIMS)

Nonlinear equations of motion are derived for the rim inertial measuring system, which is mounted in a strapped down configuration on a carrier vehicle. The measurement and equations derived from angular rates and linear accelerations were interfaced with the dynamic model of a user defined carried vehicle. Two methods are presented for rate measurement, and the results of the nonlinear computer simulation are presented.

Joshi, S. M.↗

NASA NTRS1983

NASTRAN forced vibration analysis of rotating cyclic structures

Theoretical aspects of a new capability, developed and added to the general purpose finite element program NASTRAN Level 17.7, to conduct forced vibration analysis of turned cyclic structures rotating about their axis of symmetry, are presented. The effects of Coriolis and centripetal accelerations as well as those due to the translational acceleration of the axis of rotation, are included. The equations of motion are first derived for an arbitrary grid point of the cyclic sector finite element model and then extended for the complete model. The equations are solved by four principal steps: (1) transformation of applied loads at frequency-dependent circumferential harmonic components; (2) application of circumferential harmonic-dependent intersegment compatibility constraints; (3) solution of frequency-dependent circumferential harmonic components of displacements; and (4) recovery of frequency-dependent response in various segments of the total structure. Five interrelated examples are presented to illustrate the various features of the development.

Elchuri, V.↗

NASA NTRS1984

A generalized multiple-input, multiple-output modal parameter estimation algorithm

A new method for experimental determination of the modal parameters of a structure is presented. The method allows for multiple input forces to be applied simultaneously, and for an arbitrary number of acceleration response measurements to be employed. These data are used to form the equations of motion for a damped linear elastic structure. The modal parameters are then obtained through an eigenvalue technique. In conjunction with the development of the equations, an extensive computer simulation study was performed. The results of the study show a marked improvement in the mode shape identification for closely-spaced modes as the number of applied forces is increased. Also demonstrated is the influence of noise on the method's ability to identify accurate modal parameters. Here again, an increase in the number of exciters leads to a significant improvement in the identified parameters.

Craig, R. R., Jr.↗

NASA NTRS1985

Development and validation of a general purpose linearization program for rigid aircraft models

A FORTRAN program that provides the user with a powerful and flexible tool for the linearization of aircraft models is discussed. The program LINEAR numerically determines a linear systems model using nonlinear equations of motion and a user-supplied, nonlinear aerodynamic model. The system model determined by LINEAR consists of matrices for both the state and observation equations. The program has been designed to allow easy selection and definition of the state, control, and observation variables to be used in a particular model. Also, included in the report is a comparison of linear and nonlinear models for a high performance aircraft.

Duke, E. L.↗

NASA NTRS1985

Development and validation of a general purpose linearization program for rigid aircraft models

This paper discusses a FORTRAN program that provides the user with a powerful and flexible tool for the linearization of aircraft models. The program LINEAR numerically determines a linear systems model using nonlinear equations of motion and a user-supplied, nonlinear aerodynamic model. The system model determined by LINEAR consists of matrices for both the state and observation equations. The program has been designed to allow easy selection and definition of the state, control, and observation variables to be used in a particular model. Also, included in the report is a comparison of linear and nonlinear models for a high-performance aircraft.

Duke, E. L.↗

NASA NTRS1986

Application of parameter estimation to aircraft stability and control: The output-error approach

The practical application of parameter estimation methodology to the problem of estimating aircraft stability and control derivatives from flight test data is examined. The primary purpose of the document is to present a comprehensive and unified picture of the entire parameter estimation process and its integration into a flight test program. The document concentrates on the output-error method to provide a focus for detailed examination and to allow us to give specific examples of situations that have arisen. The document first derives the aircraft equations of motion in a form suitable for application to estimation of stability and control derivatives. It then discusses the issues that arise in adapting the equations to the limitations of analysis programs, using a specific program for an example. The roles and issues relating to mass distribution data, preflight predictions, maneuver design, flight scheduling, instrumentation sensors, data acquisition systems, and data processing are then addressed. Finally, the document discusses evaluation and the use of the analysis results.

Maine, Richard E.↗

NASA NTRS1986

Nonlinear flexure and torsion of rotating beams, with application to helicopter rotor blades. I - Formulation. II - Response and stability results

The dynamic response and aeroelastic stability of rotating beams such as helicopter blades is investigated analytically. The Hamilton principle is used to formulate the equations of motion for extensional and inextensional beams with precone angles and variable pitch angles, taking higher-order nonlinearities into account. The derivation of the equations and their approximate solution by a Galerkin procedure are explained in detail, and numerical results of equilibrium solutions and stability analyses are presented graphically.

Crespo Da Silva, M. R. M.↗

NASA NTRS1999

Eigenmodes of Ducted Flows With Radially-Dependent Axial and Swirl Velocity Components

This report characterizes the sets of small disturbances possible in cylindrical and annular ducts with mean flow whose axial and tangential components vary arbitrarily with radius. The linearized equations of motion are presented and discussed, and then exponential forms for the axial, circumferential, and time dependencies of any unsteady disturbances are assumed. The resultant equations form a generalized eigenvalue problem, the solution of which yields the axial wavenumbers and radial mode shapes of the unsteady disturbances. Two numerical discretizations are applied to the system of equations: (1) a spectral collocation technique based on Chebyshev polynomial expansions on the Gauss-Lobatto points, and (2) second and fourth order finite differences on uniform grids. The discretized equations are solved using a standard eigensystem package employing the QR algorithm. The eigenvalues fall into two primary categories: a discrete set (analogous to the acoustic modes found in uniform mean flows) and a continuous band (analogous to convected disturbances in uniform mean flows) where the phase velocities of the disturbances correspond to the local mean flow velocities. Sample mode shapes and eigensystem distributions are presented for both sheared axial and swirling flows. The physics of swirling flows is examined with reference to hydrodynamic stability and completeness of the eigensystem expansions. The effect of assuming exponential dependence in the axial direction is discussed.

Kousen, Kenneth A.↗