Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Distribution System State Estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Advanced Modular Power System Fully Populated Electronics Enclosure Thermal Testing

A thermal test of an enclosure housing the AMPS electronics cards was performed. The enclosure was fully populated with 17 nonfunctioning AMPS electronics cards. Heaters were applied to the cards to simulate their operation. A cold plate was installed on the top of the case. The case was then insulated to simulate its installation within an electronics rack with the face and rear of the enclosure left open. The cold plate was connected to a chiller which provided cooling water at a fixed input temperature to the cold plate. Flow rates from the chiller of 0.0 L/min, 1.4 L/min and 1.8 L/min were tested. The test was operated at each flow rate over a range of heater power levels until the steady state temperature of the electronics cards was reached. Heater power levels from 2.5 W/card to 45 W/card were tested. The data collected was used to determine the steady state operating temperature of the cards, the temperature distribution between the cards, the time to reach steady-state temperature, the change in steady state temperature with change in heater power, the temperature distribution between the cards at the steady state condition and the heat lost to the surrounds by the enclosure. One of the main goals of the testing was to determine how much waste heat the cards could generate and still maintain a touch temperature at or below 40°C. Based on this requirement, for the 3 cooling rates tested, the maximum card waste heat that could be generated by each individual card was 3.9 W, 16.3 W and 17.6 W respectively. An analysis was also set up to provide an analytical model to estimate the card temperature under different cold plate flow rates and card heater power levels. The results off the analysis was compared to that of the experiment of the range of flow rates and power levels tested.

Anthony Colozza↗

Kernel Density Estimators for SAMPLER Analyses [Slides]

This presentation discusses Sampler, specifically in terms of uncertainty quantification and states that for many simulation tasks nominal input parameters have complicated influence on the uncertainty in the final result. Sampler provides a convenient means to perform stochastic uncertainty quantification, brute force sampling parameter space and tallying changes in outputs, and it can be coupled with any SCALE modules. Perturbed responses can be collected and analyzed with standard statistical measures; however, two problems have been identified. The first problem is that for Monte Carlo simulations the individual response uncertainties are ignored, and the second problem is that features of distributions are easily hidden in histograms. They found that the solution is to add Kernel Density Estimator (KDE) analysis to the Sampler output. In conclusion, Sampler is a unique tool for stochastic uncertainty propagation, and it can be coupled with any module in SCALE. Current functionality is limited to histograms, and it may not adequately account for sample uncertainties and/or not adequately display underlying distribution features. Work is in progress to implement KDE in the Sampler module and no additional flagging is needed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Visible spectroscopy diagnostics for tungsten source assessment in the WEST tokamak: First measurements

The present work concerns the measurements obtained with the Tungsten (W) Environment in Steady-state Tokamak (WEST) visible spectroscopy system during the first experimental campaign. This system has been developed in the framework of the WEST project that equipped the existing Tore Supra device with a tungsten divertor in order to test actively cooled tungsten Plasma Facing Components (PFC) in view of preparing for ITER operation. The goal of this diagnostic is to measure the PFC sources and the deuterium recycling with spectral, spatial, and temporal resolution adapted to the predicted power deposition profiles on the objects observed. Three kinds of PFCs are monitored: the Ion Cyclotron Resonance Heating (ICRH) antenna and Low Hybrid Current Drive (LHCD) launcher W limiters; one of the 6 W inner bumpers; and the upper and lower W divertors. Large-aperture in-vessel actively cooled optical systems (f-number ~ 3) were installed for each view and connected to optical fibres. A total of 240 optical fibers can be distributed on various detection systems including a fast response-time, multi-channel, filtered photodetector-based “Filterscope” system, developed by Oak Ridge National Laboratory (USA) as well as grating spectrometers optimized for multi-sightline analysis. The first WEST experimental campaign conducted in 2017 has been dedicated to plasma start-up development during which the visible spectroscopy system has provided crucial information related to the impurity content first and then impurity sources. The diagnostic setup for that first experimental campaign was limited to the inner bumper and outer limiters but was sufficient to demonstrate that the optical setup was in accordance with the specifications. The radiance calibration procedure allowed us to estimate fluxes from the main limiter of about 8 × 10 18 atoms/(s m 2 ) and to show a first W source radial profile along the outboard limiter.

Meyer, O.↗

Towards a Robust Adaptive Digital Twin for Fusion Applications

The development of a digital twin system for fusion applications is essential for enhancing the prediction, analysis, and optimization of complex plasma processes. Machine learning (ML), particularly deep learning has demonstrated strong capabilities in modeling such highly nonlinear and intricate systems. However, two critical challenges limit the deployment of deep learning-based digital twins: Uncertainty Quantification (UQ) and data drift. UQ is vital for ensuring trustworthy predictions, especially in decision-support scenarios. Additionally, data-driven models are often sensitive to changes in the underlying data distribution, such as shot-to-shot variations in fusion experiments, which can lead to performance degradation over time. To address these challenges, we are developing an uncertainty-aware, adaptive digital twin framework. Our approach incorporates deep learning models enhanced with Gaussian Process approximations for predictive uncertainty estimation, coupled with an online learning mechanism that enables continuous model adaptation to new experimental data. This adaptive capability allows the data driven models to respond effectively to evolving plasma behaviors and equipment conditions. Specifically, to mitigate the effects of shot-to-shot drift, our system updates itself incrementally as new data becomes available, improving both robustness and fidelity. Our vision is to evolve this data driven model into a self-sustaining digital twin system that leverages UQ based feedback to continuously refine itself and potentially support real-time decision making. This presentation will cover a brief background on uncertainty quantification for ML, our ongoing effort on development of UQ capabilities for ML, our data science pipeline from data collection to model development and analysis and online learning framework for modeling coil deflection at DIII-D. I will also briefly touch upon opportunities and challenges in development of digital twin framework.

Sammuli, Brian [General Atomics]↗

Predicting Large‐Scale Systematic Missing Pipe Attributes in Water Distribution Networks

Water distribution network (WDN) models are an essential tool used by water utilities for hydraulic analysis. Unfortunately, missing data and insufficient resources often make creating and maintaining these models unfeasible. Existing methods to address missing pipe properties, like sequential imputation for missing values and reconstruction using graph metrics, are designed to accommodate random patterns of missing information and require a significant percentage of the system's attributes to be known. However, these data completeness assumptions do not always align with real‐world scenarios where large sections of the WDN model have missing data. To address this challenge, this study proposes a data‐driven approach for estimating pipe diameter when considering different spatial patterns and degrees of data completeness (i.e., 0%–90%). Using data from 16 WDNs in Kentucky, this study compares the use of machine learning (ML) using topological and geospatial features against an existing deterministic approach. Results demonstrate that WDN models with pipe diameters predicted by the proposed ML method had comparable hydraulic performance to the ground truth models. Moreover, results showed that ML method performance varies between WDNs of differing topological classification. Insights from this study help advance the ability to leverage partial data to create and maintain WDN models amid uncertainty and inadequate resources.

Poff, Jason W. [Oregon State Univ., Corvallis, OR ↗

Analysis of Unpolarised p+p¿ Photoproduction with the GlueX Experiment

This thesis presents measurements of spin-density matrix elements in unpolarised p+p? photoproduction on a proton target. The dominant resonance contribution to the dipion system is the r(770) meson. Due to the large production cross section for this resonance, a valid comparison can be made between the obtained final results and r(770) spin-density matrix elements measured previously with other experiments. The measurement was performed over the 3:0 ? 11:6 GeV beam energy regime, which is a more extensive energy range than has ever been studied previously for the r(770). Results were obtained by analysing data from the GlueX experiment based at Jefferson Lab. Extended maximum likelihood fits were applied to extract three spin-density matrix elements using Markov chain Monte Carlo based parameter estimations. This was performed using various binning configurations to probe the energy, mass, and four-momentum transfer dependence of the determined physics observables. Spin-density matrix elements are shown to be consistent with the model of s-channel helicity conservation at low ?t. The effects of pomeron and f2 exchanges are clearly visible in the energy dependence of the measured observables. These observations provide valuable insights into the relative strengths of both processes as a function of the photon energy, and may enable theorists to disentangle the f2=P coupling ratio. Spin-density matrix elements are seen to be highly dependent on the reconstructed resonance mass. This observation is likely to be a result of non-resonant S-wave background processes, and emphasises the need for a more detailed model of the p+p? angular distribution that considers all of the competing angular momentum components that contribute to the measured final state. The statistical precision of measurements performed for this thesis surpass what was achievable in previous studies of the r(770) by several orders of magnitude. Studies of the energy and four-momentum transfer dependence, and insights into the effects of non r(770) background contributions provide valuable input for production models. This will help inform the choice of wave-sets used for partial wave analyses, supporting GlueX in its search for exotic hybrid meson states.

Fitches, James↗

Phase Identification in Real Distribution Networks with High PV Penetration Using Advanced Metering Infrastructure Data

Many distribution network monitoring and control applications - including state estimation, volt/VAR optimization, and network reconfiguration - rely on accurate network models; however, the network models maintained by utilities can become outdated because of restoration activities, network reconfiguration, and missing data. With the widespread deployment of advanced metering infrastructure (AMI), abundant measurement data from low-voltage secondary networks are available. The AMI measurement data can be used for phase identification to improve the network models. Although the existing phase identification techniques work well in passive distribution feeders that do not have photovoltaic (PV) generation, they can fail to accurately identify the phases in the presence of PV. This paper proposes a robust phase identification algorithm based on supervised machine learning that accurately identifies the AMI meter phase connectivity in the presence of significant PV generation. The proposed algorithm does not require network topology information or feeder head measurement data. The algorithm is validated using the AMI measurement data collected in the field and the field-validated phase connectivity database on two real distribution feeders from San Diego Gas & Electric Company that have significant PV generation.

advanced metering infrastructure↗

Phase Identification in Real Distribution Networks with High PV Penetration Using Advanced Metering Infrastructure Data: Preprint

Many distribution network monitoring and control applications - including state estimation, volt/VAR optimization, and network reconfiguration - rely on accurate network models; however, the network models maintained by utilities can become outdated because of restoration activities, network reconfiguration, and missing data. With the widespread deployment of advanced metering infrastructure (AMI), abundant measurement data from low-voltage secondary networks are available. The AMI measurement data can be used for phase identification to improve the network models. Although the existing phase identification techniques work well in passive distribution feeders that do not have photovoltaic (PV) generation, they can fail to accurately identify the phases in the presence of PV. This paper proposes a robust phase identification algorithm based on supervised machine learning that accurately identifies the AMI meter phase connectivity in the presence of significant PV generation. The proposed algorithm does not require network topology information or feeder head measurement data. The algorithm is validated using the AMI measurement data collected in the field and the field-validated phase connectivity database on two real distribution feeders from San Diego Gas & Electric Company that have significant PV generation.

advanced metering infrastructure↗

An XMM-Newton Monitoring Campaign of the Accretion Flow in IGRJ16318-4848

This grant is associated to a successful XMM-Newton-AO3 observational proposal to monitor the spectrum of the X-ray loud component of the recently discovered binary system IGR J16138-4848, to study the conditions of the accretion flows (and their evolution) in binary system. All four EPIC-PN and MOS observations of the target have now been performed (the last one of the 4, only 3 months ago). The four observations were logarithmically spaced, so to cover timescales from days to months. Data from all four pointings have now been reduced, using the XMM-Newton data reduction pipeline, and spectra and lightcurves from the target have been extracted. For the first three observations we have already performed the observation-by-observation data analysis, by fitting the single EPIC spectra with spectral models that include an intrinsic continuum power law (reduced at low energy by neutral absorption), a 6.4 keV iron emission line (detected in all spectra with varying intensity) and a Compton-reflection component. A Compton reflection component is also detected in all spectra, although at lower significance. The analysis of the fourth and last observation of our monitoring campaign has just recently begun. Next, we will (1) stack together the four observations of IGR J16138-4848, to obtain high-accuracy estimates of the average spectral parameters of this object; and then (2) proceed to the time-evolving analysis, of the three spectral parameters: (a) Gamma (the slope of the intrinsic continuum), (b) W(FeK), the equivalent width of the 6.4 keV Iron emission line, and (c) R, the relative amount of Compton reflection. Through this time-resolved spectroscopic analysis we hope to constrain (a) the physical state of the accreting matter and its relation with the X-ray output, and (b) the evolution of the accretion flow geometry, distribution and covering factor.

Mushotzky, Richard↗

Cropland carbon fluxes in the United States: increasing Geospatial Resolution of Inventory-Based Carbon Accounting

Net annual soil carbon change, fossil fuel emissions from cropland production, and cropland net primary productivity were estimated and spatially distributed using land cover defined by the Moderate Resolution Imaging Spectroradiometer (MODIS) and by the Cropland Data Layer (CDL). Spatially resolved estimates of net ecosystem exchange (NEE) and net ecosystem carbon balance (NECB) were developed. NEE represents net on-site vertical fluxes of carbon. NECB represents all on-site and off-site carbon fluxes associated with crop production. Estimates of cropland NEE using moderate resolution (~1km2) land cover data were generated for the conterminous US and compared with higher resolution (30m) estimates of NEE and with direct measurements of CO2 flux from croplands in Illinois and Nebraska. Estimates of NEE using the CDL (30m resolution) had a higher correlation with eddy covariance flux tower estimates compared with estimates of NEE using MODIS. Estimates of NECB are primarily driven by net soil carbon change, fossil-fuel emissions associated with crop production, and CO2 emissions from the application of agricultural lime. NEE and NECB for US croplands were -274 and 7 Tg C yr-1 for 2004, respectively. Use of moderate to high resolution satellite-based land cover data enables improved estimates of cropland carbon dynamics.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Benchmarking thermal energy storage cost for industrial process heat

Process heat accounts for roughly half of industrial energy demand, and currently 95% of process heat is derived from the combustion of natural gas, oil, and coal. Electrification of industrial heating could be an alternative, potentially expanding locations suitable for manufacturing; however, industrial facility owners may desire energy storage to stabilize energy costs. In this work, the economic benefits of pairing thermal storage with electrified process heat to reduce the average price paid for energy are analyzed. Cost savings focus on energy arbitrage, or leveraging flexible energy pricing schemes, alone. The cost of natural gas combustion across decades (2019-2060) is compared to the costs of electricity and thermal energy storage in four United States Independent System Operator (ISO) regions. Systems installed today may not yield positive net present value (NPV) compared to the use of natural gas. However, using estimated electricity prices, systems installed in 2030 using arbitrage alone could be profitable when compared to natural gas in some regions of the U.S. Furthermore, if capital expenditures could be reduced by 50% for sensible thermal storage systems by 2030, profitable systems are found across all regions. This implies that electrification of industrial process heat, when paired with inexpensive thermal energy storage systems, could be less expensive than brownfield natural gas systems, using arbitrage as the only source of revenue and without a dependency on any future policy drivers such as pricing externalities that could further incentivize the electrification of industrial process heat.

24 POWER TRANSMISSION AND DISTRIBUTION↗

An Integrated Modeling Framework for Sediment Dynamics During Urban Flooding: Application to Hurricane Harvey in Houston

Floodwater can mobilize and redistribute large volumes of sediment from upland to downstream urban areas, threatening infrastructure, water quality, and ecosystem health. However, existing modeling approaches often fail to capture sediment dynamics in urban floodplains due to the lack of integration between upland hydrological processes and riverine sediment transport. This study presents the first integrated modeling framework that couples the Energy Exascale Earth System Model (E3SM) land component, which simulates runoff and hillslope erosion, with TELEMAC-GAIA, a two-dimensional hydrodynamic and sediment transport model. This framework enables the fully distributed, process-based simulation of high-resolution (as fine as 30 m) sediment dynamics from hillslopes to floodplains. Applied to a highly urbanized watershed in Houston during Hurricane Harvey, this framework reproduced observed water levels at 16 USGS gauges (median R 2 = 0.83 and KGE = 0.78), key sediment dynamics such as sediment transport and deposition processes, and reproduced spatial deposition patterns consistent with LiDAR-derived data. Based on the simulation, we estimate 8.0 million m 3 of event-scale sediment deposition, including 5.7 million m 3 trapped in the flood-control reservoirs and 2.3 million m 3 deposited along major channels and floodplains. Using a representative unit removal cost, this corresponds to an estimated dredging cost of $581 million for total deposition. These results provide a first-order, physically based quantification of Harvey-scale sediment impacts. This study provides a valuable tool for the holistic analysis of sediment dynamics triggered by extreme urban flooding, supporting flood-resilience planning. More broadly, it highlights the importance of integrating physically based hydrological processes for urban flooding and sediment research.

Hurricane Harvey↗

Automatic Calibration and Health Monitoring of Infrastructure Sensors

Smart transportation infrastructure relies on networks of heterogeneous sensors - cameras, radars, and lidars - continuously monitoring traffic conditions. However, executing the initial spatial calibration of multiple sensors and the subsequent health monitoring presents significant operational challenges. Environmental factors, mechanical vibrations, and gradual drift cause spatial misalignment, degrading fusion performance and tracking accuracy. Traditional calibration approaches require manual intervention with specialized targets or survey equipment, resulting in service interruptions and high maintenance costs. This work presents an automated framework for initial calibration and continuous health monitoring without human intervention or service disruption. Our approach addresses two critical problems: (1) detecting when sensors become miscalibrated during operation, and (2) automatically re-establishing spatial alignment using only operational traffic data. The health monitoring component analyzes measurement innovations - differences between sensor observations and predicted object states - to detect systematic biases indicative of calibration drift. By computing bias magnitude, directional consistency, and rejection rates, the system identifies miscalibrations as small as 0.5 meters. Unlike traditional methods requiring known calibration targets, our diagnostic operates continuously on live traffic observations, enabling early detection before fusion quality degrades. The automatic recalibration algorithm leverages overlapping sensor fields-of-view and temporal correlation of vehicle observations. Using graph-based optimization, the system automatically discovers which sensor pairs observe common regions, estimates pairwise spatial transformations using RANSAC-based robust estimation, and jointly optimizes all sensor poses through bundle adjustment. The framework handles practical deployment challenges, including different sensor sampling rates (1-10 Hz), varying installation positions, unknown orientations, and limited overlap regions (>10%). When approximate sensor positions are available from installation surveys (+/-1m accuracy), the algorithm additionally estimates sensor orientations, refining both position and rotation to sub-meter and sub-degree accuracy. We validate the framework on multi-hour traffic datasets from six heterogeneous sensors with sampling rates ranging from 1 Hz to 10 Hz. Results demonstrate successful calibration even with sparse overlap (<20%) and automatic detection of miscalibrations exceeding 0.8 meters. This work enables a "deploy-and-forget" sensor infrastructure that maintains calibration autonomously, reducing maintenance costs while improving tracking accuracy. The techniques generalize beyond transportation to any multi-sensor monitoring application requiring robust spatial alignment, including smart cities, industrial monitoring, and surveillance systems.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Residential Vehicle-to-Home Backup Power Capabilities: Key Findings from a ComEd Beneficial Electrification R&D Pilot

This report summarizes key findings from a collaborative technical study of residential, non-grid-tied vehicle-to-home (V2H) backup power systems in Commonwealth Edison’s (ComEd’s) service territory. The work integrates (1) a feeder-level technoeconomic analysis (TEA) using historical outage-event data and simulated electric-vehicle (EV) driving/charging profiles to estimate potential reliability and customer interruption-cost impacts under V2H and vehicle-to-grid (V2G) adoption scenarios; (2) controlled laboratory performance testing of a representative V2H backup ecosystem to characterize transfer-to-backup behavior, sustained power delivery, efficiency trends, and repeatable reliability limitations; and (3) a cybersecurity assessment aligned with NIST Cybersecurity Framework (CSF) 2.0 and ISO/SAE 21434 to evaluate interface-level risk drivers and identify program-relevant mitigations. Results indicate that V2H can provide measurable resilience value, but outcomes are strongly context dependent on outage patterns and the share of events that are “V2H-applicable.” Typical transfer-to-backup behavior clustered on the order of minutes, but rare long-delay edge cases were observed (including an event approaching 30 minutes) and should be treated as a reliability risk. High-power testing showed that peak-rated output is not necessarily continuously deliverable; stable operation may require operation below nameplate ratings and attention to thermal and installation constraints. The cybersecurity assessment highlights a broad attack surface spanning commissioning, home networks, embedded services, and cloud/OTA pathways, motivating minimum controls for secure onboarding, signed updates, patch cadence, and coordinated vulnerability response for any scaled deployment.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Can the chirality of the ISM be measured

Many moderately complex carbon-based molecules of the type associated with biological systems can exist in one of two mirror-image forms (left-handed and right-handed), which can be distinguished on the basis of their influence on the state of polarization of a light beam. Both forms are possible in nature; yet in living organisms it is invariably the rule that one of these two species predominates. This gives rise to a net chirality. One possible explanation for the net chirality is that the early earth was somehow seeded from the ISM with an excess of chiral organic compounds which led to the development of life forms which are based on left-handed amino acids and right-handed sugars. Molecular spectroscopy of the interstellar medium (ISM) has revealed a complex variety of molecular species similar to those thought to have been available in the oceans and atmospheres of the earth at the time life formed. The detection of such molecules demonstrates the generality of the chemical processes occurring in both environments. If this generality extends to the processes which produce chirality, it may be possible to detect a net chirality in the ISM. This is of particular interest because determining whether or not net chirality exists elsewhere in the universe is an essential aspect of understanding how life developed on earth and how widely distributed it might be. Researchers report preliminary results of a feasibility study to determine whether or not a net chirality in the ISM can be measured. If laboratory results identify candidate chiral molecules that might exist in the ISM, the next step in this feasibility study will be to estimate the detectability of the chiral signature in astrophysical environments.

Pendleton, Y.↗

Energy, power, and infrastructure demands from electrifying airport ground support equipment at United States airports

As the airline industry seeks to reduce costs and transition to clean energy, electric ground support equipment is emerging as a favorable option. The integration of electric ground support equipment into airport operations requires careful planning for vehicle deployment, charging infrastructure, and grid impacts. We develop a flexible, bottom-up modeling framework to assess energy and infrastructure needs across more than 300 U.S. airports. Our analysis estimates site-specific power and energy demand, equipment counts by type, charger requirements, and costs. Here we quantify the magnitude of new electrical loads created by the electrification of airport ground support equipment, finding that peak power demand at the largest airports can reach up to 20 megawatts, with annual electricity consumption approaching 51,000 megawatt-hours. We further show that behind-the-meter battery energy storage systems and solar photovoltaic systems can reduce peak load and lower total system costs by as much as 10 million dollars.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Applying Gaussian Process Machine Learning and Modern Probabilistic Programming to Satellite Data to Infer CO 2 Emissions

Satellite data provides essential insights into the spatiotemporal distribution of CO 2 concentrations. However, many atmospheric inverse models fail to adequately incorporate the spatial and temporal correlations inherent in satellite observations and often lack rigorous methods for estimating parameters like spatial length scales. We introduce an inference model that processes the spatiotemporal covariance in satellite data and estimates hyperparameters such as covariance length scales. Our approach uses the Gaussian process (GP) machine learning (ML) and modern probabilistic programming languages (PPLs) to perform atmospheric inversions of emissions from satellite data. We develop a GP ML inversion system based on modern PPLs and the GEOS-Chem chemical transport model, simulating atmospheric CO 2 concentrations corresponding to the Orbiting Carbon Observatory-2/3 (OCO-2/3) data for July 2020. In our supervised learning framework, we treat the GEOS-Chem simulated data set as the target, with predictors derived by scaling the target with sector-specific factors hidden from the GP machine. Our results show that the GP model, combined with GPU-enabled PPLs, effectively retrieves true emission scaling factors and infers noise levels concealed within the data. This suggests that our method could be applied over larger areas with more complex covariance structures, enabling comprehensive analysis of the spatiotemporal patterns observed in OCO-2/3 and similar satellite data sets.

54 ENVIRONMENTAL SCIENCES↗

Feedback-Based, System-Level Properties of Vertebrate-Microbial Interactions

Improved characterization of infectious disease dynamics is required. To that end, three-dimensional (3D) data analysis of feedback-like processes may be considered. To detect infectious disease data patterns, a systems biology (SB) and evolutionary biology (EB) approach was evaluated, which utilizes leukocyte data structures designed to diminish data variability and enhance discrimination. Using data collected from one avian and two mammalian (human and bovine) species infected with viral, parasite, or bacterial agents (both sensitive and resistant to antimicrobials), four data structures were explored: (i) counts or percentages of a single leukocyte type, such as lymphocytes, neutrophils, or macrophages (the classic approach), and three levels of the SB/ EB approach, which assessed (ii) 2D, (iii) 3D, and (iv) multi-dimensional (rotating 3D) host-microbial interactions. In all studies, no classic data structure discriminated disease-positive (D+, or observations in which a microbe was isolated) from disease-negative (D–, or microbial-negative) groups: D+ and D– data distributions overlapped. In contrast, multi-dimensional analysis of indicators designed to possess desirable features, such as a single line of observations, displayed a continuous, circular data structure, whose abrupt inflections facilitated partitioning into subsets statistically significantly different from one another. In all studies, the 3D, SB/EB approach distinguished three (steady, positive, and negative) feedback phases, in which D– data characterized the steady state phase, and D+ data were found in the positive and negative phases. In humans, spatial patterns revealed false-negative observations and three malaria-positive data classes. In both humans and bovines, methicillin-resistant Staphylococcus aureus (MRSA) infections were discriminated from non-MRSA infections. More information can be extracted, from the same data, provided that data are structured, their 3D relationships are considered, and well-conserved (feedback-like) functions are estimated. Patterns emerging from such structures may distinguish well-conserved from recently developed host-microbial interactions. Applications include diagnosis, error detection, and modeling.

59 BASIC BIOLOGICAL SCIENCES↗