SEARCH · Engineering Papers

Results for “Distributed”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Initial drop size and velocity distributions for airblast coaxial atomizers

Phase Doppler measurements were used to determine initial drop size and velocity distributions after a complete disintegration of coaxial liquid jets. The Sauter mean diameter (SMD) distribution was found to be strongly affected by the structure and behavior of the preceding liquid intact jet. The axial measurement stations were determined from the photographs of the coaxial liquid jet at very short distances (1-2 mm) downstream of the observed break-up locations. Minimum droplet mean velocities were found at the center, and maximum velocities were near the spray boundary. Size-velocity correlations show that the velocity of larger drops did not change with drop size. Drop rms velocity distributions have double peaks whose radial positions coincide with the maximum mean velocity gradients.

Eroglu, H.↗

NASA NTRS1991

Mars elevation distribution

A Digital Terrain Model (DTM) of Mars was derived with both Mercator and Sinusoidal Equal-Area projections from the global topographic map of Mars (scale 1:15 million, contour interval 1 km). Elevations on the map are referred to Mars' topographic datum that is defined by the gravity field at a 6.1-millibar pressure surface with respect to the center of mass of Mars. The DTM has a resolution at the equator of 1/59.226 degrees (exactly 1 km) per pixel. By using the DTM, the volumetric distribution of Mars topography above and below the datum has previously been calculated. Three types of elevation distributions of Mars' topography were calculated from the same DTM: (1) the frequency distribution of elevations at the pixel resolution; (2) average elevations in increments of 6 degrees in both longitude and latitude; and (3) average elevations in 36 separate blocks, each covering 30 degrees of latitude and 60 degrees of longitude.

Wu, Sherman S. C.↗

NASA NTRS1991

Effect of locus of resource control on operational efficiency in distributed operations

The following topics are presented in view graph form: space network control (SNC) usage in the Advanced Tracking and Data Relay Satellite (ATDRSS) era; an acronym and icon list; demands of the SNC; tightness of resources coupling; sharing information and sharing control; potential ways of distributing control; efficiency problems unrelated to distribution of control; efficiency problems related to distribution of control; and recommendations.

Geoffroy, A. L.↗

NASA NTRS1991

Distributed memory compiler methods for irregular problems: Data copy reuse and runtime partitioning

Outlined here are two methods which we believe will play an important role in any distributed memory compiler able to handle sparse and unstructured problems. We describe how to link runtime partitioners to distributed memory compilers. In our scheme, programmers can implicitly specify how data and loop iterations are to be distributed between processors. This insulates users from having to deal explicitly with potentially complex algorithms that carry out work and data partitioning. We also describe a viable mechanism for tracking and reusing copies of off-processor data. In many programs, several loops access the same off-processor memory locations. As long as it can be verified that the values assigned to off-processor memory locations remain unmodified, we show that we can effectively reuse stored off-processor data. We present experimental data from a 3-D unstructured Euler solver run on iPSC/860 to demonstrate the usefulness of our methods.

Das, Raja↗

NASA NTRS1991

Maintaining consistency in distributed systems

In systems designed as assemblies of independently developed components, concurrent access to data or data structures normally arises within individual programs, and is controlled using mutual exclusion constructs, such as semaphores and monitors. Where data is persistent and/or sets of operation are related to one another, transactions or linearizability may be more appropriate. Systems that incorporate cooperative styles of distributed execution often replicate or distribute data within groups of components. In these cases, group oriented consistency properties must be maintained, and tools based on the virtual synchrony execution model greatly simplify the task confronting an application developer. All three styles of distributed computing are likely to be seen in future systems - often, within the same application. This leads us to propose an integrated approach that permits applications that use virtual synchrony with concurrent objects that respect a linearizability constraint, and vice versa. Transactional subsystems are treated as a special case of linearizability.

Birman, Kenneth P.↗

NASA NTRS1991

Distributed semantic networks and CLIPS

Semantic networks of frames are commonly used as a method of reasoning in many problems. In most of these applications the semantic network exists as a single entity in a single process environment. Advances in workstation hardware provide support for more sophisticated applications involving multiple processes, interacting in a distributed environment. In these applications the semantic network may well be distributed over several concurrently executing tasks. This paper describes the design and implementation of a frame based, distributed semantic network in which frames are accessed both through C Language Integrated Production System (CLIPS) expert systems and procedural C++ language programs. The application area is a knowledge based, cooperative decision making model utilizing both rule based and procedural experts.

Snyder, James↗

NASA NTRS1991

Integrating CLIPS applications into heterogeneous distributed systems

SOCIAL is an advanced, object-oriented development tool for integrating intelligent and conventional applications across heterogeneous hardware and software platforms. SOCIAL defines a family of 'wrapper' objects called agents, which incorporate predefined capabilities for distributed communication and control. Developers embed applications within agents and establish interactions between distributed agents via non-intrusive message-based interfaces. This paper describes a predefined SOCIAL agent that is specialized for integrating C Language Integrated Production System (CLIPS)-based applications. The agent's high-level Application Programming Interface supports bidirectional flow of data, knowledge, and commands to other agents, enabling CLIPS applications to initiate interactions autonomously, and respond to requests and results from heterogeneous remote systems. The design and operation of CLIPS agents are illustrated with two distributed applications that integrate CLIPS-based expert systems with other intelligent systems for isolating and mapping problems in the Space Shuttle Launch Processing System at the NASA Kennedy Space Center.

Adler, Richard M.↗

NASA NTRS1992

Application of optical distributed sensing and computation to control of large space structures

A real time holographic sensing technique is introduced and its advantages are investigated from the filtering and control point of view. A feature of holographic sensing is its capability to make distributed measurements of the position and velocity of moving objects, such as a vibrating flexible space structure. This work is based upon the distributed parameter models of linear time invariant systems, particularly including the linear oscillator equations describing the vibration of large flexible space structures. The general conclusion is that application of optical distributed sensors bring gains in the situation where Kalman filtering is necessary for state estimation. In this case, both steady state and transient filtering error covariance become smaller. This in turn results in smaller cost in the LQG problem.

Balakrishnan, A. V.↗

NASA NTRS1992

Distributed Visualization for Computational Fluid Dynamics

Distributed concurrent visualization and computation in computational fluid dynamics (CFD) is not a new concept. Specialized applications such as Realtime Interactive Particle-tracer (RIP) and vendor specific tools like Distributed Graphics Language (DGL) have been in use for some time. This paper describes a current project underway at NASA Lewis Research Center to provide the CFD researcher with an easy method for incorporating distributed processing concepts into program development. Details on the FORTRAN capable interface to a set of network and visualization functions are presented along with some results from initial CFD case studies that employ these techniques.

Don J Sosoka↗

NASA NTRS1992

Distributed acoustic receptivity in laminar flow control configurations

A model problem related to distributed receptivity to free-stream acoustic waves in laminar flow control (LFC) configurations is studied, within the Orr-Sommerfield framework, by a suitable extension of the Goldstein-Ruban theory for receptivity due to localized disturbances on the airfoil surface. The results, thus, complement the earlier work on the receptivity produced by local variations in the surface suction and/or surface admittance. In particular, we show that the cumulative effect of the distributed receptivity can be substantially larger than that of a single, isolated suction strip or slot. Furthermore, even if the receptivity is spread out over very large distances, the most effective contributions come from a relatively short region in vicinity of the lower branch of the neutral stability curve. The length scale of this region is intermediate to that of the mean of these two length scales. Finally, it is found that the receptivity is effectively dominated by a narrow band of Fourier components from the wall-suction and admittance distributions, roughly corresponding to a detuning of less than ten percent with respect to the neutral instability wavenumber at the frequency under consideration. The results suggest that the drop-off in receptivity magnitudes away from the resonant wavenumber is nearly independent of the frequency parameter.

Choudhari, Meelan↗

NASA NTRS1992

Distribution of Martian ground-ice table: Preliminary results about climatic variations

Rampart craters seem to have been emplaced by flows around craters over the surface just after the impact event by melting of volatiles. Such rampart craters are considered to be good ground-ice indicators. A map shows a latitudinal distribution of Martian ground-ice with a deep ground-ice table at equatorial latitudes and subsurface ground-ice tables at mid and high latitudes. Some studies suggest the presence of large amounts of ground-ice on Mars, with near surface ground-ice in the northern plains and a permafrost at low latitudes containing a large amount of volatiles at depth. Spatial variations in the spin axis of the planet affect the latitudinal distribution of the Sun's isolation, and therefore the Martian ground-ice distribution.

Costard, F. M.↗

NASA NTRS1992

A Developing Multiple-wavelength Lidar for Detecting Mainly Ozone and Aerosol Distributions in the Stratosphere

A multiple wavelength lidar is being developed at the Institute of Atmospheric Physics, Beijing, China, for measuring mainly ozone and aerosol distributions in the stratosphere. The system is based on a Xecl excimer laser operating at 308nm and an Nd-YAG laser with three wavelengths of 1060nm, 532nm, and 355nm. The specifications of the lidar system are given in tabular form. The system is designed to measure the following parameters: 1) ozone vertical distribution (15-45km); 2) aerosol distribution (6-35km); 3) atmospheric temperature (30-70km); and 4) high clouds. The expected performances of the lidar system are simulated.

Zheng, Siping↗

NASA NTRS1992

Building a generalized distributed system model

The key elements in the second year (1991-92) of our project are: (1) implementation of the distributed system prototype; (2) successful passing of the candidacy examination and a PhD proposal acceptance by the funded student; (3) design of storage efficient schemes for replicated distributed systems; and (4) modeling of gracefully degrading reliable computing systems. In the third year of the project (1992-93), we propose to: (1) complete the testing of the prototype; (2) enhance the functionality of the modules by enabling the experimentation with more complex protocols; (3) use the prototype to verify the theoretically predicted performance of locking protocols, etc.; and (4) work on issues related to real-time distributed systems. This should result in efficient protocols for these systems.

Mukkamala, R.↗

NASA NTRS1992

Optical distributed sensors for feedback control: Characterization of photorefractive resonator

The aim of the project was to explore, define, and assess the possibilities of optical distributed sensing for feedback control. This type of sensor, which may have some impacts in the dynamic control of deformable structures and the monitoring of small displacements, can be divided into data acquisition, data processing, and control design. Analogue optical techniques, because they are noninvasive and afford massive parallelism may play a significant role in the acquisition and the preprocessing of the data for such a sensor. Assessing these possibilities was the aim of the first stage of this project. The scope of the proposed research was limited to: (1) the characterization of photorefractive resonators and the assessment of their possible use as a distributed optical processing element; and (2) the design of a control system utilizing signals from distributed sensors. The results include a numerical and experimental study of the resonator below threshold, an experimental study of the effect of the resonator's transverse confinement on its dynamics above threshold, a numerical study of the resonator above threshold using a modal expansion approach, and the experimental test of this model. A detailed account of each investigation, including methodology and analysis of the results are also included along with reprints of published and submitted papers.

Indebetouw, Guy↗

NASA NTRS1991

The Galactic distribution of free electrons

Various radioastronomical measurements are synthesized here to derive a large-scale Galactic model for the distribution of free electrons and for microstructure in the distribution that seems to be caused by turbulence in the ISM. A two-component axisymmetric model fitted on all scales from 100 km to a few pc, accounts for most of the data. A population of dense, discrete clouds is also needed, and there is some evidence for spiral structure. The model allows better distance estimates for pulsars to be made. The implications of the model for the structure and ionization of the ISM and for the distribution of interstellar turbulence and the diffusion of cosmic rays are discussed.

Cordes, J. M.↗

NASA NTRS1991

Distributed scheduling with COMPASS

COMPASS (COMPuter Aided Scheduling System) is a sophisticated, interactive scheduling tool used within NASA. Like most existing tools, however, COMPASS is a single-user application. There is a large class of scheduling problems which may be better solved by allowing several people at various locations to build separate schedules with shared resources. DISCORS (DIStributed COmputer Resource Scheduling) is a set of services which support a distributed version of COMPASS. This architecture naturally accommodates the integration of user-defined resource models without modifying COMPASS. DISCORS services include the ability to establish and manage communications, to code messages in efficient formats, to provide fault detection and recovery, and to configure schedulers across a network. In its present form, DISCORS effectively supports distributed COMPASS, but fails to run fast and to guarantee efficient schedules. Further enhancements may allow several users to simultaneously and interactively work together to create complex schedules while COMPASS detects and coordinates the resolution of conflicting requests.

Rufat-Latre, Jorge↗

NASA NTRS1992

Local distribution of old neutron stars

The local distribution of old disk neutron stars is approximated with a 1D model, in which the steady state distribution in the direction perpendicular to the Galactic plane is calculated, assuming a variety of the initial radio pulsar positions and velocities, and various Galactic potentials. It is found that the local distribution of old neutron stars is dominated by those that were born with very low velocities. The high-velocity neutron stars spend most of their lifetime far in the Galactic halo and do not contribute much to the local density. Therefore, the rms velocity at birth is not a good indicator of the scale height of the old population. The most likely half-density scale height for the old disk neutron stars is approximately 350 pc, the same as for the old disk G, K, and M stars. If gamma-ray bursts originate on old disk neutron stars, then 350 pc should also be the scale height for the bursters.

Frei, Szolt↗

NASA NTRS1992

Probability distributions for the magnification of quasars due to microlensing

Gravitational microlensing can magnify the flux of a lensed quasar considerably and therefore possibly influence quasar source counts or the observed quasar luminosity function. A large number of distributions of magnification probabilities due to gravitational microlensing for finite sources are presented, with a reasonable coverage of microlensing parameter space (i.e., surface mass density, external shear, mass spectrum of lensing objects). These probability distributions were obtained from smoothing two-dimensional magnification patterns with Gaussian source profiles. Different source sizes ranging from 10 exp 14 cm to 5 x 10 exp 16 cm were explored. The probability distributions show a large variety of shapes. Coefficients of fitted slopes for large magnifications are presented.

Wambsganss, Joachim↗