Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Defect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Defect Self-Elimination in Nanocube Superlattices Through the Interplay of Brownian, van der Waals, and Ligand-Based Forces and Torques

Understanding defect healing is necessary for realizing devices based on nanoparticle-superlattices with controlled electronic and optoelectronic performance. However, key questions remain regarding nanoparticle interactions and resulting assembly dynamics and defect self-elimination. In particular, for anisotropic particles, additional degrees of freedom beyond those of spherical particles, such as rotational dynamics and toques, significantly impact phenomena. Here, in this work, we investigate nanocube (NC) superlattices by employing liquid phase transmission electron microscopy, continuum theories and molecular dynamics simulations. Analyzing interparticle forces and torques due to van der Waals, Brownian, and ligand interactions, we find that the latter dominates and that the anisotropic NC morphology introduces significant torques. In imperfect regions, unbalanced forces and torques induce NC translations and rotations that are transmitted to neighboring NCs, prompting “chain interactions” in a 2D network, which lead to defect self-elimination. This fundamental understanding will further enable design and fabrication of defect-free superlattices, as well as those with tailored defects, via assembly of anisotropic particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterizing Defects Inside Hexagonal Boron Nitride Using Random Telegraph Signals in van der Waals 2D Transistors

Single-crystal hexagonal boron nitride (hBN) is used extensively in many two-dimensional electronic and quantum devices, where defects significantly impact performance. Therefore, characterizing and engineering hBN defects are crucial for advancing these technologies. Here, we examine the capture and emission dynamics of defects in hBN by utilizing low-frequency noise (LFN) spectroscopy in hBN-encapsulated and graphene-contacted MoS 2 field-effect transistors (FETs). The low disorder of this heterostructure allows the detection of random telegraph signals (RTS) in large device dimensions of 100 μm 2 at cryogenic temperatures. Analysis of gate bias- and temperature-dependent LFN data indicate that RTS originates from a single trap species within hBN. By performing multi-space density functional theory (MS-DFT) calculations on a gated defective hBN/MoS 2 heterostructure model, we assign substitutional carbon atoms in boron sites as the atomistic origin of RTS. This study demonstrates the utility of LFN spectroscopy combined with MS-DFT analysis on a low-disorder all-vdW FET as a powerful means for characterizing the atomistic defects in single-crystal hBN.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Atomistic Defect Makes a Phase Plate for the Generation and High-Angular Splitting of Electron Vortex Beams

Topological defects in solid-state materials by breaking the translational symmetry offer emerging properties that are not present in their parental phases. For example, edge dislocations—the 2π phase-winding topological defects—in antiferromagnetic NiO crystals can exhibit ferromagnetic behaviors. We study how these defects could give rise to topological orders when they interact with a high-energy electron beam. To probe this interaction, we formed a coherent electron nanobeam in a scanning transmission electron microscope and recorded the far-field transmitted patterns as the beam steps through the edge dislocation core in [001] NiO. Surprisingly, we found the amplitude patterns of the <020> Bragg disks evolve in a similar manner to the evolution of an annular solar eclipse. Using the ptychographic technique, we recovered the missing phase information in the diffraction plane and revealed the topological phase vortices in the diffracted beams. Through atomic topological defects, the wave function of electrons can be converted from plane wave to electron vortex. Technologically, this approach provides a feasible route for the fabrication of phase plates that can generate electron vortex beams with an angular separation that is three orders of magnitude larger than what traditional nanofabrication technology can offer. This advance will enable the collection of magnetic circular dichroism spectra with high spatial resolution and high efficiency, boosting the understanding of the relationship between symmetry breaking and magnetic property of individual topological defect at the atomic scale.

36 MATERIALS SCIENCE↗

Ultrafast Exciton Trapping at sp 3 Quantum Defects in Carbon Nanotubes

Semiconducting single-walled carbon nanotubes (SWCNTs) constitute an ideal platform for developing near-infrared biosensors, single photon sources, and nanolasers due to their distinct optical and electrical properties. Covalent doping of SWCNTs has recently been discovered as an efficient approach in enhancing their emission intensities. We perform pump–probe studies of SWCNTs that are covalently doped with sp 3 quantum defects and reveal strikingly different exciton formation dynamics and decay mechanisms in the presence of the defect sites. We show that, in highly doped SWCNTs, ultrafast trapping of excitons at the defect sites can outpace other photodynamic processes and lead to ground-state photobleaching of the quantum defects. Our fitting of the transient data with a kinetic model also reveals an upper limit in the quantum defect density for obtaining highly luminescent SWCNTs without causing irreversible damage. In conclusion, these findings not only deepen our understanding of the photodynamics in covalently doped SWCNTs but also reveal critical information for the design of bright near-infrared emitters that can be utilized in biological, quantum information, and nanophotonic applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Iridium Nanocrystals Enriched with Defects and Atomic Steps to Enhance Oxygen Evolution Reaction Performance

The presence of defects can significantly improve catalytic activity and stability, as they influence the binding of the reactants, intermediates, and products to the catalyst. Controlling defects in the structures of nanocrystal catalysts is synthetically challenging. In this study, we demonstrate the ability to control the growth of Ir nanocrystals, enabling the tuning of both structural and surface defects. The Ir nanocrystals have unique structures that range from single crystals of a few nanometers to twinned nanoparticles and multiply twinned crystallites with a high density of atomic steps. Further, this approach of defect engineering enables us to understand their roles in enhancing the performance of the OER and producing an Ir catalyst with both high activity and stability. Our results show the importance of the concept of using synthetic control of structural and surface defects in metal nanoparticles as a strategy to improve catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Film Thickness and Domain Spacing on Defect Densities in Directed Self-Assembly of Cylindrical Morphology Block Copolymers

Directed assembly of block copolymer thin films is recognized as a high-throughput, low-cost complement to optical lithography with the ability to overcome the 32 nm natural resolution limit of conventional lithographic techniques. For bulk block copolymer systems, desired feature sizes ranging from 5 to 100 nm can be obtained by controlling the molecular weight and composition of a block copolymer, as long as the bulk order-disorder temperature (ODT) is such that the copolymer is well-segregated at the processing conditions. However, our studies on graphoepitaxially aligned cylindrical morphology block copolymer monolayer and bilayer films demonstrate that, as domain sizes are reduced, the block copolymer becomes increasingly susceptible to an unacceptably high density of thermally generated defects, resulting in a significant reduction of the ODT. Thus, in thin films, the minimum feature spacing accessible is limited by thermal defect generation and not by the bulk ODT. Our experimental studies on monolayer films of cylindrical morphology polystyrene-b-poly(2-vinyl pyridine) with microdomain spacings approaching 20 nm reveal that defect densities and the ODT are surprisingly sensitive to variations as small as 2 nm in the microdomain spacing. Additionally, the monolayer and bilayer ODT differ by nearly 100 C when the monolayer domain spacing is 20 nm, while the difference is only 20 C when the monolayer domain spacing is 22 nm. We explain this behavior using a quantitative estimation of the energetic cost of defect production in terms of the domain spacing, {chi}N, and block copolymer composition. These studies reveal unexpected consequences on the equilibrium defect densities of thin film block copolymers which must be accounted for when designing a block-copolymer-based directed-assembly process.

36 MATERIALS SCIENCE↗

Real-space chirality from crystalline topological defects in the Kitaev spin liquid

We show that certain crystalline topological defects in the gapless Kitaev honeycomb spin liquid model generate a chirality and Majorana fermion orbital magnetization that depends in a universal manner on their emergent flux. Focusing on 5–7 dislocations as building blocks, consisting of pentagon and heptagon disclinations, we identify the Kitaev bond label configurations that preserve solvability. By computing two formulations of local markers M(r) we find that the 5 and 7 lattice defects generate a real-space contribution to Chern number and an associated Majorana fermion orbital magnetization proportional to M(r). The sign of the M(r) contribution from each 5/7 defect, i.e. its q M = ± 1 chirality, is determined by the defect Frank angle sign F and emergent gauge field flux W = ± i through the expression q M = − iFW. Remarkably, though lattice curvature and torsion can interplay with the surrounding gapless background to modify the profile of M(r), its sign q M is determined locally, implying that crystalline defects in the Kitaev spin liquid can generate a robust and observable chirality.

Magnetic properties and materials↗

Quantifying dislocation-type defects in post irradiation examination via transfer learning

The quantitative analysis of dislocation-type defects in irradiated materials is critical to materials characterization in the nuclear energy industry. The conventional approach of an instrument scientist manually identifying any dislocation defects is both time-consuming and subjective, thereby potentially introducing inconsistencies in the quantification. This work approaches dislocation-type defect identification and segmentation using a standard open-source computer vision model, YOLO11, that leverages transfer learning to create a highly effective dislocation defect quantification tool while using only a minimal number of annotated micrographs for training. This model demonstrates the ability to segment both dislocation lines and loops concurrently in micrographs with high pixel noise levels and on two alloys not represented in the training set. Inference of dislocation defects using transmission electron microscopy on three different irradiated alloys relevant to the nuclear energy industry are examined in this work with widely varying pixel noise levels and with completely unrelated composition and dislocation formations for practical post irradiation examination analysis. Code and models are available at https://github.com/idaholab/PANDA.

36 MATERIALS SCIENCE↗

Laser annealing characteristics of multiple bulk defect populations within DKDP crystals

Laser annealing by pre-exposure to subdamage threshold laser pulses is a well-established method to increase the damage performance of bulk KH{sub 2}PO{sub 4} and KD{sub x}H{sub 2-x}PO{sub 4} nonlinear optical materials. The origin of laser-induced damage is believed to be localized absorption by a defect structure, either a light-absorbing foreign nanoparticle or a cluster of stoichiometric defects. It has been recently shown that there are at least three populations of such defect structures in these materials in which pre-exposure to laser pulses of specific fluence and wavelength results in a measurable reduction in their number density or decrease in their susceptibility to damage. In this work, we investigate the annealing characteristics of these three populations of defect structures in DKDP under variable irradiation conditions. The aim is to understand the similarities and differences between these populations in the way they interact with laser light. The results depict distinct behaviors that reveal information on the relationship between the defect populations and their modifications responsible for annealing.

36 MATERIALS SCIENCE↗

Point Defects Creation by Swift Heavy Ion Irradiation Induced Low Energy Electrons in YBa{sub 2}Cu{sub 3}O{sub 7-y} through Dissociative Recombination

Our in-situ temperature dependent resistance studies in a set of YBa{sub 2}Cu{sub 3}O{sub 7-y}(YBCO) thin films irradiated with 200 MeV Ag ions at 79 K show that in addition to amorphized latent tracks, a large concentration of point defects are created by the secondary electrons emitted radially from the ion path. Detailed calculation of the energetics indicates that in the YBCO matrix, these secondary electrons cannot create defect by direct elastic knock-on process. We propose an inelastic interaction of the secondary electrons with the YBCO matrix, which results into defect creation by a process similar to dissociative recombination. Our study shows that accumulation of point defects during irradiation is accompanied by self-organization of point defect into clustering and phase segregation.

36 MATERIALS SCIENCE↗

DETECTION OF LACK OF FUSION WELD DEFECTS BY RADIOGRAPHY

In this work, radiography was employed as the NDT technique for detection of flaws in circumferential girth welds of steel pipelines used in offshore installations in the petroleum industry. The kind of defect specifically focused was lack of fusion. It is currently accepted in the literature that radiography is not as sensitive as ultrasonics to detect lack of fusion defects. Unfortunately, the radiographic inspection can barely detect lack of fusion and only when it is associated to inclusions and voids of considerable size. However, in a previous article ('Reliability of radiographic inspection of steel pipeline girth welds', QNDE Conference, 2007), the authors showed that it is possible to detect lack of fusion defects if, in the radiographic tests, the angle of incidence is the same angle that the weld bevel makes with the test piece surface, which means lowering the angle of disorientation between the flaw and the radiographic beam. However, no concerns were made to sizing the defects. Computational simulation was used with XRSIM software to establish the optimal radiographic parameters to reach the lower limit for detection for this kind of defect.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Predicting the Occurrence of Cosmetic Defects in Automotive Skin Panels

The appearance of defects such as 'hollows' and 'shock lines' can affect the perceived quality and attractiveness of automotive skin panels. These defects are the result of the stamping process and appear as small, localized deviations from the intended styling of the panels. Despite their size, they become visually apparent after the application of paint and the perceived quality of a panel may become unacceptable. Considerable time is then dedicated to minimizing their occurrence through tool modifications. This paper will investigate the use of the wavelet transform as a tool to analyze physically measured panels. The transform has two key aspects. The first is its ability to distinguish small scale local defects from large scale styling curvature. The second is its ability to characterize the shape of a defect in terms of its wavelength and a 'correlation value'. The two features of the transform enable it to be used as a tool for locating and predicting the severity of defects. The paper will describe the transform and illustrate its application on test cases.

36 MATERIALS SCIENCE↗

Impact of hydrogen and oxygen defects on the lattice parameter of chemical vapor deposited zinc sulfide

The lattice parameter of cubic chemical vapor deposited (CVD) ZnS with measured oxygen concentrations < 0.6 at.% and hydrogen impurities of < 0.015 at.% have been measured and found to vary between -0.10% and +0.09% relative to the reference lattice parameter (5.4093 Å) of oxygen-free cubic ZnS as reported in the literature. Defects other than substitutional O must be invoked to explain these observed volume changes. The structure and thermodynamic stability of a wide range of native and impurity induced defects in ZnS have been determined by Ab initio calculations. Lattice contraction is caused by S-vacancies, substitutional O on S sites, Zn vacancies, H in S vacancies, peroxy defects, and dissociated water in S-vacancies. The lattice is expanded by interstitial H, H in Zn vacancies, dihydroxy defects, interstitial oxygen, Zn and [ZnHn] complexes (n=1,…,4), interstitial Zn, and S2 dumbbells. Oxygen, though present, likely forms substitutional defects for sulfur resulting in lattice contraction rather than as interstitial oxygen resulting in lattice expansion. It is concluded based on measurement and calculations that excess zinc atoms either at anti-sites (i.e. Zn atoms on S-sites) or possibly as interstitial Zn are responsible for the relative increase of the lattice parameter of commercially produced CVD ZnS.

ab initio↗

Point defects introduced by InN alloying into In{sub x}Ga{sub 1-x}N probed using a monoenergetic positron beam

Native defects in In{sub x}Ga{sub 1-x}N (x = 0.06-0.14) grown by metal organic chemical vapor deposition were studied using a monoenergetic positron beam. Measurements of Doppler broadening spectra of the annihilation radiation as a function of incident positron energy for In{sub x}Ga{sub 1-x}N showed that vacancy-type defects were introduced with increasing InN composition, and the major defect species was identified as complexes between a cation vacancy and a nitrogen vacancy. The concentration of the divacancy, however, was found to be suppressed by Mg doping. The momentum distribution of electrons at the In{sub x}Ga{sub 1-x}N/GaN interface was close to that in defect-free GaN or In{sub x}Ga{sub 1-x}N, which was attributed to localization of positrons at the interface due to the built-in electric field, and to suppression of positron trapping by vacancy-type defects. We have also shown that the diffusion property of positrons is sensitive to an electric field near the In{sub x}Ga{sub 1-x}N/GaN interface.

36 MATERIALS SCIENCE↗

Electrical characterisation and predictive simulation of defects induced by keV Si{sup +} implantation in n-type Si

In this work, we focused on the analysis of implantation-induced defects, mainly small interstitial clusters (ICs) and {l_brace} 311{r_brace} defects introduced in n-type Si after ion implantation using deep level transient spectroscopy (DLTS). Silicon ions (at 160 keV or 190 keV) of fluences ranging from (0.1-8.0) Multiplication-Sign 10{sup 13} cm{sup -2} have been implanted into n-type Si and annealed at temperatures between 500 Degree-Sign C and 800 Degree-Sign C specifically to create small ICs or {l_brace} 311{r_brace} s rod-like defects. In samples dominated by small ICs, DLTS spectra show prominent deep levels at Ec - 0.24 eV and Ec - 0.54 eV. After increasing the fluence and temperature, i.e., reducing the number of small ICs and forming {l_brace} 311{r_brace} defects, the peak Ec - 0.54 eV is still dominant while other electron traps Ec - 0.26 eV and Ec - 0.46 eV are introduced. There were no observable deep levels in reference, non-implanted samples. The identity and origin of all these traps are interpreted in conjunction with recently developed predictive defect simulation models.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Defects in {sup 6}LiInSe{sub 2} neutron detector investigated by photo-induced current transient spectroscopy and photoluminescence

{sup 6}LiInSe{sub 2} is a promising thermal neutron semiconductor detector material. The performance of the detector is affected by the carrier mobility-lifetime products. Therefore, defects that function as carrier recombination centers need to be identified. In this letter, characterization of defect levels in {sup 6}LiInSe{sub 2} by photo-induced current transient spectroscopy (PICTS) and photoluminescence is reported. PICTS measurements revealed electron-related defects located at 0.22, 0.36, and 0.55 eV and hole-related defects at 0.19, 0.30, and 0.73 eV. Free exciton and donor-acceptor pairs (DAP) emissions were observed. The PICTS defect level values are consistent with those extracted from DAP transitions.

36 MATERIALS SCIENCE↗

Defect formation by pristine indenter at the initial stage of nanoindentation

Nano-indentation is a sophisticated method to characterize mechanical properties of materials. This method samples a very small amount of material during each indentation. Therefore, this method is extremely useful to measure mechanical properties of nano-materials. The measurements using nanoindentation is very sensitive to the surface topology of the indenter and the indenting surfaces. The mechanisms involved in the entire process of nanoindentation require an atomic level understanding of the interplay between the indenter and the substrate. In this paper, we have used atomistic simulation methods with empirical potentials to investigate the effect of various types of pristine indenter on the defect nucleation and growth. Using molecular dynamics simulations, we have predicted the load-depth curve for conical, vickers, and sperical tip. The results are analyzed based on the coherency between the indenter tip and substrate surface for a fixed depth of 20 Å. The depth of defect nucleation and growth is observed to be dependent on the tip geometry. A tip with larger apex angle nucleates defects at a shallower depth. However, the type of defect generated is dependent on the crystalline orientation of the tip and substrate. For coherent systems, prismatic loops were generated, which released into the substrate along the close-packed directions with continued indentation. For incoherent systems, pyramidal shaped dislocation junctions formed in the FCC systems and disordered atomic clusters formed in the BCC systems. These defect nucleation and growth process provide the atomistic mechanisms responsible for the observed load-depth response during nanoindentation.

36 MATERIALS SCIENCE↗

Electrical characterization of defects introduced in n-Ge during electron beam deposition or exposure

Schottky barrier diodes prepared by electron beam deposition (EBD) on Sb-doped n-type Ge were characterized using deep level transient spectroscopy (DLTS). Pt EBD diodes manufactured with forming gas in the chamber had two defects, E{sub 0.28} and E{sub 0.31}, which were not previously observed after EBD. By shielding the samples mechanically during EBD, superior diodes were produced with no measureable deep levels, establishing that energetic ions created in the electron beam path were responsible for the majority of defects observed in the unshielded sample. Ge samples that were first exposed to the conditions of EBD, without metal deposition (called electron beam exposure herein), introduced a number of new defects not seen after EBD with only the E-center being common to both processes. Substantial differences were noted when these DLTS spectra were compared to those obtained using diodes irradiated by MeV electrons or alpha particles indicating that very different defect creation mechanisms are at play when too little energy is available to form Frenkel pairs. These observations suggest that when EBD ions and energetic particles collide with the sample surface, inducing intrinsic non-localised lattice excitations, they modify defects deeper in the semiconductor thus rendering them observable.

36 MATERIALS SCIENCE↗