SEARCH · Engineering Papers

Results for “Conditional rate functions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

All sources NASA NTRS DOE OSTI

DOE OSTI2014

Operations of a Radioisotope-based Propulsion System Enabling CubeSat Exploration of the Outer Planets

Exploration to the outer planets is an ongoing endeavor but in the current economical environment, cost reduction is the forefront of all concern. The success of small satellites such as CubeSats launched to Near-Earth Orbit has lead to examine their potential use to achieve cheaper science for deep space applications. However, to achieve lower cost missions; hardware, launch and operations costs must be minimized. Additionally, as we push towards smaller exploration beds with relative limited power sources, allowing for adequate communication back to Earth is imperative. Researchers at the Center for Space Nuclear Research are developing the potential of utilizing an advanced, radioisotope-based system. This system will be capable of providing both the propulsion power needed to reach the destination and the additional requirements needed to maintain communication while at location. Presented here are a basic trajectory analysis, communication link budget and concept of operations of a dual-mode (thermal and electric) radioisotope-based propulsion system, for a proposed mission to Enceladus (Saturnian icy moon) using a 6U CubeSat payload. The radioisotope system being proposed will be the integration of three sub-systems working together to achieve the overall mission. At the core of the system, stored thermal energy from radioisotope decay is transferred to a passing propellant to achieve high thrust – useful for quick orbital maneuvering. An auxiliary closed-loop Brayton cycle can be operated in parallel to the thrusting mode to provide short bursts of high power for high data-rate communications back to Earth. Additionally, a thermal photovoltaic (TPV) energy conversion system will use radiation heat losses from the core. This in turn can provide the electrical energy needed to utilize the efficiency of ion propulsion to achieve quick interplanetary transit times. The intelligent operation to handle all functions of this system under optimized conditions adds to the complexity of the mission architecture.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2023

High-Throughput Automated Exploration of Phase Growth Behaviors in Quasi-2D Formamidinium Metal Halide Perovskites

Quasi-2D metal halide perovskites (MHPs) are an emerging material platform for sustainable functional optoelectronics, but the uncontrollable, broad phase distribution remains a critical challenge for applications. Nevertheless, the basic principles for controlling phases in quasi-2D MHPs remain poorly understood, due to the rapid crystallization kinetics during the conventional thin-film fabrication process. In this work, a high-throughput automated synthesis-characterization-analysis workflow is implemented to accelerate material exploration in formamidinium (FA)-based quasi-2D MHP compositional space, revealing the early-stage phase growth behaviors fundamentally determining the phase distributions. Upon comprehensive exploration with varying synthesis conditions including 2D:3D composition ratios, antisolvent injection rates, and temperatures in an automated synthesis-characterization platform, it is observed that the prominent n = 2 2D phase restricts the growth kinetics of 3D-like phases—α-FAPbI 3 MHPs with spacer-coordinated surface—across the MHP compositions. Thermal annealing is a critical step for proper phase growth, although it can lead to the emergence of unwanted local PbI 2 crystallites. Additionally, fundamental insights into the precursor chemistry associated with spacer-solvent interaction determining the quasi-2D MHP morphologies and microstructures are demonstrated. The high-throughput study provides comprehensive insights into the fundamental principles in quasi-2D MHP phase control, enabling new control of the functionalities in complex materials systems for sustainable device applications.

2D perovskites↗

NASA NTRS2000

Slow Crack Growth Analysis of Advanced Structural Ceramics Under Combined Loading Conditions: Damage Assessment in Life Prediction Testing

Slow crack growth analysis was performed with three different loading histories including constant stress-rate/constant stress-rate testing (Case I loading), constant stress/constant stress-rate testing (Case II loading), and cyclic stress/constant stress-rate testing (Case III loading). Strength degradation due to slow crack growth arid/or damage accumulation was determined numerically as a Function of percentage of interruption time between the two loading sequences for a given loading history. The numerical solutions were examined with the experimental data determined at elevated temperatures using four different advanced ceramic materials, two silicon nitrides, one silicon carbide and one alumina for the Case I loading history, and alumina for the Case II loading history. The numerical solutions were in reasonable agreement with the experimental data, indicating that notwithstanding some degree of creep deformation presented for some test materials slow crack growth was a governing mechanism associated with failure for all the test material&

Choi, Sung R.↗

NASA NTRS2000

Slow Crack Growth Analysis of Advanced Structural Ceramics Under Combined Loading Conditions: Damage Assessment in Life Prediction Testing

Slow crack growth analysis was performed with three different loading histories including constant stress-rate/constant stress-rate testing (Case 1 loading), constant stress/constant stress-rate testing (Case 2 loading), and cyclic stress/constant stress-rate testing (Case 2 loading). Strength degradation due to slow crack growth and/or damage accumulation was determined numerically as a function of percentage of interruption time between the two loading sequences for a given loading history. The numerical solutions were examined with the experimental data determined at elevated temperatures using four different advanced ceramic materials, two silicon nitrides, one silicon carbide and one alumina for the Case 1 loading history, and alumina for the Case 3 loading history. The numerical solutions were in reasonable agreement with the experimental data, indicating that notwithstanding some degree of creep deformation presented for some test materials slow crack growth was a governing mechanism associated with failure for all the test materials.

Choi, Sung R.↗

DOE OSTI2021

Effects of surface species and homogeneous reactions on rates and selectivity in ethane oxidation on oxide catalysts

Selective alkane oxidations on metal oxide catalysts involve complex mechanisms with multiple reactions in series and parallel, different types of reduced and oxidized surface species, and potential contributions from gas-phase reactions. We report kinetics and thermodynamics of elementary steps involved in C 2 H 6 -O 2 reactions on SiO 2 -supported small vanadium oxide domains are determined using density functional theory. These surface reactions together with gas-phase mechanisms are incorporated in kinetic simulations to determine how surface and gaseous reactions interact and contribute to rates and selectivity. The results show that gas-phase reactions within pore volumes in contact with the catalyst contribute significantly to C 2 H 6 activation rates, even at conditions where gas-phase reactions in empty volumes without catalyst are negligible. The majority of C 2 H 6 activations occur on the surface, via H abstraction by vanadium oxo species present at terminal lattice oxygens. The gas-phase activations via H-abstraction by OH radicals also exhibit significant contributions. The reduced centers formed by reactions at vanadium oxo species are re-oxidized rapidly and, therefore, are present in very small concentrations at reaction conditions. The re-oxidation steps lead to the formation of HO 2 radicals and surface peroxo species that are also rapidly consumed and are present in small concentrations. The peroxo species preferentially convert C 2 H 4 to its epoxide product and influence selectivity even at low concentrations. The gas-phase reactions decrease the concentrations of peroxo species and improve selectivity slightly. The effects of reaction conditions and catalyst site density provide further insights into how factors beyond conversions at lattice oxygens influence rates and selectivity in alkane oxidation reactions of significant industrial importance.

42 ENGINEERING↗

DOE OSTI2021

The effects of food quantity, light, and temperature on clearance rates in freshwater bivalves (Cyrenidae and Unionidae)

Assessing the environmental variables that influence freshwater bivalve filtration activity is key to better understand the functioning of stream ecosystems. Here, the effects of light (0 ± 0 µmol m –2 s –1 and 19 ± 2 µmol m –2 s –1 ) and temperature (10, 15, 20 and 25°C) on the clearance rates of two bivalve species: the Asian clam Corbicula fluminea (Cyrenidae) and pocketbook Lampsilis ovata (Unionidae) were assessed under controlled laboratory conditions at two different concentrations of algal food (i.e., 10,000 cells ml –1 and 100,000 cells ml –1 ). Clearance rates for C. fluminea varied from 0 to 491 ml g –1 h –1 , while the observed range for L. ovata was 0 to 905 ml g –1 h –1 . We found that the relative contribution of the tested variables was species-dependent. While temperature plays a major role in the clearance rates of C. fluminea , food concentration was the most significant variable in the clearance rate of L. ovata . Our results confirm the complex interactions between abiotic and biotic factors in freshwater bivalve filtration activity. Overall, clearance rates are highly variable especially in C. fluminea and presumably regulated by other untested factors suggesting high plasticity in filtration.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

Metabolic responses to increased temperatures in three semi-aquatic turtle species from the southeastern United States

Physiological maintenance of ectotherms is largely dependent on temperature. Abrupt changes in environmental conditions can cause shifts in energy budgets, with higher temperatures requiring more energy be devoted to maintenance functions, making less energy available for other activities. As a group, freshwater turtles are of conservation concern; thus, it is important to understand their physiological responses to temperature shifts, particularly given current climate change predictions. Here, we quantified metabolic rates (MR) for three species of semi-aquatic turtles that vary in their degree of terrestriality and propensity to aestivate: chicken turtles (Deirochelys reticularia), eastern mud turtles (Kinosternon subrubrum), and eastern musk turtles (Sternotherus odoratus). Metabolic trials were performed using a flow-through respirometer at three environmentally-relevant temperatures: 25°C, 30°C, and 35°C. As expected, MRs of turtles were significantly and positively associated with increases in mass and temperature. Pairwise comparisons revealed that D. reticularia exhibited significantly higher oxygen consumption rates (VO 2 ) relative to K. subrubrum, which had significantly higher VO 2 than S. odoratus. The combination of higher metabolic rates, the tendency to terrestrially aestivate, and declining quantity of high quality thermal habitats may place some semi-aquatic turtles at a disadvantage when considering future climate scenarios. Our findings, when combined with knowledge of other ecological traits, may be a useful tool for predicting relative sensitivities of turtle species to predicted climate change, particularly those species inhabiting seasonal wetlands.

Sternotherus odoratus↗

DOE OSTI2022

Probing growth of metal–organic frameworks with X-ray scattering and vibrational spectroscopy

Nucleation and crystallization arising from liquid to solid phase are involved in a multitude of processes in fields ranging from materials science to biology. Controlling the thermodynamics and kinetics of growth is advantageous to help tune the formation of complex morphologies. In this report, we harness wide-angle X-ray scattering and vibrational spectroscopy to elucidate the mechanism for crystallization and growth of the metal–organic framework Co-MOF-74 within microscopic volumes enclosed in a capillary and an attenuated total reflection microchip reactor. The experiments reveal molecular and structural details of the growth processes, while the results of plane wave density functional calculations allow identification of lattice and linker modes in the formed crystals. Synthesis of the metal–organic framework with microscopic volumes leads to monodisperse and micron-sized crystals, in contrast to those typically observed under bulk reaction conditions. Reduction in the volume of reagents within the microchip reactor was found to accelerate the reaction rate. The coupling of spectroscopy with scattering to probe reactions in microscopic volumes promises to be a useful tool in the synthetic chemist's kit to understand chemical bonding and has potential in designing complex materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2016

Completing the nuclear reaction puzzle of the nucleosynthesis of Mo 92

One of the greatest questions for modern physics to address is how elements heavier than iron are created in extreme astrophysical environments. A particularly challenging part of that question is the creation of the so-called p-nuclei, which are believed to be mainly produced in some types of supernovae. Here, the lack of needed nuclear data presents an obstacle in nailing down the precise site and astrophysical conditions. In this work, we present for the first time measurements on the nuclear level density and average γ strength function of 92 Mo. State-of-the-art p-process calculations systematically underestimate the observed solar abundance of this isotope. Our data provide stringent constraints on the 91 Nb(p,γ) 92 Mo reaction rate, which is the last unmeasured reaction in the nucleosynthesis puzzle of 92 Mo. Based on our results, we conclude that the 92 Mo abundance anomaly is not due to the nuclear physics input to astrophysical model calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2015

An Emergent Conductivity Relationship for Water Flow Based on Minimized Dissipation: From Landscapes to Unsaturated Soils

Optimality principles have been widely used in many areas. Based on an optimality principle that a flow field will tend toward a minimum in the energy dissipation rate, this work shows that there exists a unified form of conductivity relationship for two different flow systems: landscapes and unsaturated soils. The conductivity, the ratio of water flux to water head (energy) gradient, is a power function of water flux where the exponent value is system dependent. This relationship indicates that to minimize energy dissipation rate for a whole system, water flow has a small resistance (or a large conductivity) at a location of large water flux. Empirical evidence supports validity of the relationship for landscape and unsaturated soils (under gravity dominated conditions). Especially, it is of interest that according to this relationship, hydraulic conductivity for gravity-dominated unsaturated flow, unlike that defined in the classic theories, depends on not only capillary pressure (or saturation), but also the water flux. Use of the optimality principle allows for determining useful results that may be applicable to a broad range of areas involving highly non-linear processes and may not be possible to obtain from classic theories describing water flow processes.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Hydropower Biological Evaluation Toolset (HBET) Version 3.0: User Guide

The Hydropower Biological Evaluation Tools (HBET) software package, developed by Pacific Northwest National Laboratory (PNNL), is designed to assemble, organize, and process data collected by Sensor Fish and live fish. HBET enable users to characterize the hydraulic conditions of hydropower structures and estimate fish injury and mortality rates from various stressors. Future updates of the software may support other technologies, such as bead tracking in physical models and computational fluid dynamics. The HBET program can be customized to analyze different hydraulic applications, including turbines, spillways, weirs, pumped storage, and other user-defined functions, and therefore, help researchers, turbine designers, hydropower operators, and regulators better evaluate hydropower structures regarding their environmental sustainability and cost-effectiveness. Added content to the user guide about the new feature for predicting absolute injury rates.

13 HYDRO ENERGY↗

NASA NTRS1973

Attenuation and phase dispersion in the atmosphere due to the microwave spectrum of oxygen

Radio wave propagation in the 40- to 140-GHz band through the earth's atmosphere is strongly influenced by the behavior of the O2 microwave spectrum. This behavior causes the transfer function to depend critically upon altitude. The spectroscopic properties of O2 are discussed and reduced to engineering formulas expressing attenuation and phase dispersion rates in terms of frequency and meteorological parameters. The theory is supported on several accounts by reliable spectroscopic measurements. Pressure scanning spectroscopy is used to investigate the O2 microwave spectrum under simulated atmospheric conditions. The application of spectroscopic information to analytical treatments of transfer properties for inhomogeneous slant paths is demonstrated. Attenuation and phase dispersion between 49 and 72 GHz are evaluated for zenith and tangential paths.

Liebe, H. J.↗

NASA NTRS1985

A study of internal and distributed damping for vibrating turbomachiner blades

Internal and distributed damping as possible methods for reducing the vibration response of turbomachine blades and theoretical methods for analyzing damped vibration were studied. It is demonstrated how the Ritz-Galerkin methods may be used to straightforwardly to analyze forced vibrations with damping. This is done directly without requiring the free vibration eigenfunctions. The Galerkin method is an effective technique for these types of problems. The Ritz method has the further advantage of not needing to satisfy the force type boundary conditions, which is particularly important for plates and shells. But proper functionals representing the forcing and damping terms must be developed, and this is done. Two types of damping--viscous and material (hysteretic) are considered. Both distributed and concentrated exciting forces are treated. Numerical results are obtained for cantilevered beams and rectangular plates. Studies showing the rates of convergence of the solutions are made. In the case of the cantilever beam, approximate solutions from the present methods are compared with the exact solutions.

Leissa, A. W.↗

NASA NTRS1989

Transpiration during life cycle in controlled wheat growth

A previously-developed model of wheat growth, designed for convenient incorporation into system-level models of advanced space life support systems is described. The model is applied to data from an experiment that grew wheat under controlled conditions and measured fresh biomass and cumulated transpiration as a function of time. The adequacy of modeling the transpiration as proportional to the inedible biomass, and an age factor which varies during the life cycle, are examined. Results indicate that during the main phase of vegetative growth in the first half of the life cycle, the rate of transpiration per unit mass of inedible biomass is more than double the rate during the phase of grain development and maturation during latter half of the life cycle.

Volk, Tyler↗

NASA NTRS1993

Pump and Flow Control Subassembly of Thermal Control Subsystem for Photovoltaic Power Module

The pump and flow control subassembly (PFCS) is an orbital replacement unit (ORU) on the Space Station Freedom photovoltaic power module (PVM). The PFCS pumps liquid ammonia at a constant rate of approximately 1170 kg/hr while providing temperature control by flow regulation between the radiator and the bypass loop. Also, housed within the ORU is an accumulator to compensate for fluid volumetric changes as well as the electronics and firmware for monitoring and control of the photovoltaic thermal control system (PVTCS). Major electronic functions include signal conditioning, data interfacing and motor control. This paper will provide a description of each major component within the PFCS along with performance test data. In addition, this paper will discuss the flow control algorithm and describe how the nickel hydrogen batteries and associated power electronics will be thermally controlled through regulation of coolant flow to the radiator.

Motil, Brian↗

NASA NTRS1999

Development of a Pressure-Fed Rocket Engine Using Hydrogen Peroxide and JP-8

A pressure-fed rocket engine using hydrogen peroxide and JP-8 was designed and demonstrated for upper stage space transportation applications. The engine utilizes silver plated screen catalyst to decompose 85% hydrogen peroxide (by weight). The decomposed high-temperature gas causes the JP-8 to auto-ignite and undergo chemical reaction. An ablative chamber using silica phenolic was used as the combustion chamber. The present effort includes catalyst development, injector evaluation, and chamber char and erosion characterization. Wagonwheel-type distribution and support plates were used in the catalyst bed design to reduce pressure drop, to increase active area, and to avoid flow channeling. Various fuel injection and mixing approaches were investigated and the combustion efficiency was in the range from 89 to 98%, depending on injector design and operating conditions. Fuel film cooling, up to 40% of the total fuel flow, was found to be ineffective with the current engine configuration. A ring injector was selected because of the satisfactory performance and its low cost. The char and erosion rates were determined through hot-fire tests. The char depth was found to be a function of axial distance, which was related to the progress of chemical reaction. Correlation of the char and erosion rates was developed as a design database for future applications,

Wu, P.-K.↗

DOE OSTI2026

Semi-Dynamic Leach Testing of Densified Silicon-based Iodine Waste Forms

Iodine waste forms (IWF) require a conceptual corrosion release model (CCRM) to provide iodine (I) release rates for performance modeling nuclear waste disposal repositories. To develop a CCRM, an understanding of the corrosion mechanisms of the IWF are required along with data from consistent test methods to parameterize the model. The present study has advanced both areas by providing and assessing the corrosion resistance of IWF types based on their processing history in minor variations of semi-dynamic leach tests. The test included a series of semi-dynamic leach tests using monolithic IWFs in deionized water (leachant). Several experiments were conducted under alternate test conditions with changes to temperature, leachant replacement, leachant pH, leachant volume, masking, and surface finish to elucidate if varying these conditions impacted IWF corrosion behavior. Tests were conducted on two classes of IWFs: (1) I-bearing silver-mordenite (AgZ) materials processed by hot isostatic pressing (HIP) at different temperatures, pressures, sizes, and times; and (2) I-bearing silver-functionalized silica aerogels (SFA) processed by either HIP or spark plasma sintering (SPS). The corrosion susceptibility of AgZ samples was influenced by HIP temperature and pressure. The SPS SFAs retained I far better than HIP SFAs. Additional findings in this study include: (1) The iodine dissolution rate decreased with decreasing temperature, (2) a common ion effect may occur and slow dissolution of the host phase if the leachant is not regularly replaced, (3) pH controls the dissolution rate, and (4) the iodine dissolution rate slows with extended test time (up to 224 days). Based on this work, these parameters should thus be represented when developing a CCRM.

corrosion↗

DOE OSTI2017

Strength anisotropy of shales deformed under uppermost crustal conditions

Conventional triaxial tests were performed on three sets of samples of Tournemire shale along different orientations relative to bedding (0°, 45°, and 90°). Experiments were carried out up to failure at increasing confining pressures ranging from 2.5 to 160 MPa, at strain rates ranging between 3 × 10 -7 s -1 and 3 × 10 -5 s -1 . This allowed us to determine the entire anisotropic elastic compliance matrix as a function of confining pressure. Results show that the orientation of principal stress relative to bedding plays an important role on the brittle strength, with 45° orientation being the weakest. We fit our results with a wing crack micromechanical model and an anisotropic fracture toughness. We found low values of internal friction coefficient and apparent friction coefficient in agreement with friction coefficient of clay minerals (between 0.2 and 0.3) and values of K /c comparable to that already published in the literature. We also showed that strain rate has a strong impact on peak stress and that dilatancy appears right before failure and hence highlighting the importance of plasticity mechanisms. Although brittle failure was systematically observed, stress drops and associated slips were slow and deformation always remained aseismic (no acoustic emission were detected). Lastly, this confirms that shales are good lithological candidates for shallow crust aseismic creep and slow slip events.

58 GEOSCIENCES↗