SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Bulk compositional and mineral chemical data for 28 previously unanalyzed samples support the classification of Apollo-17 high-Ti mare basalts into three-types (A, B, and C), defined on the basis of analyses of fine-grained basalts. The most MgO- and TiO2-rich fine-grained basalts of these types appear to be the best choices for representing the compositions of the parent magmas.
The oxidation at 900 and 1,000 C of four nickel-base superalloys in 1 atmosphere of slowly flowing oxygen was investigated. Thermogravimetric rate data were obtained for periods to 100 hours. The morphology and composition of the oxide scales formed after 100 hours were studied by optical microscopy, X-ray diffraction, electron microprobe, scanning electron microscopy, and X-ray photoelectron spectroscopy (ESCA). Alloys B-1900 and VIA were found to be primarily alumina formers, though probably 25 percent of their surface was covered by CR2O3-containing oxides at 900 C. Alloys 713C and IN-738 were primarily chromia formers, though the surface of 713C at 1,000 C was covered with NiO, and the surface of IN-738 at both temperatures was covered with a thin layer of TiO2.
Atomic-to-molecular oxygen concentrations ratio values in upper atmosphere used to determine strength of turbulent mixing in atmosphere, noting definition of turbopause height
Layers of dormant endospores of Bacillus subtilis HA101 were applied to eight different spacecraft materials and exposed to martian conditions of low pressure (8.5 mbar), low temperature (-10 degrees C), and high CO(2) gas composition and irradiated with a Mars-normal ultraviolet (UV-visible- near-infrared spectrum. Bacterial layers were exposed to either 1 min or 1 h of Mars-normal UV irradiation, which simulated clear-sky conditions on equatorial Mars (0.1 tau). When exposed to 1 min of Mars UV irradiation, the numbers of viable endospores of B. subtilis were reduced three to four orders of magnitude for two brands of aluminum (Al), stainless steel, chemfilm-treated Al, clear-anodized Al, and black-anodized Al coupons. In contrast, bacterial survival was reduced only one to two orders of magnitude for endospores on the non-metal materials astroquartz and graphite composite when bacterial endospores were exposed to 1 min of Mars UV irradiation. When bacterial monolayers were exposed to 1 h of Mars UV irradiation, no viable bacteria were recovered from the six metal coupons listed above. In contrast, bacterial survival was reduced only two to three orders of magnitude for spore layers on astroquartz and graphite composite exposed to 1 h of Mars UV irradiation. Scanning electron microscopy images of the bacterial monolayers on all eight spacecraft materials revealed that endospores of B. subtilis formed large aggregates of multilayered spores on astroquartz and graphite composite, but not on the other six spacecraft materials. It is likely that the formation of multilayered aggregates of endospores on astroquartz and graphite composite is responsible for the enhanced survival of bacterial cells on these materials.
Experiments were conducted in a Mars simulation chamber (MSC) to characterize the survival of endospores of Bacillus subtilis under high UV irradiation and simulated martian conditions. The MSC was used to create Mars surface environments in which pressure (8.5 mb), temperature (-80, -40, -10, or +23 degrees C), gas composition (Earth-normal N2/O2 mix, pure N2, pure CO2, or a Mars gas mix), and UV-VIS-NIR fluence rates (200-1200 nm) were maintained within tight limits. The Mars gas mix was composed of CO2 (95.3%), N2 (2.7%), Ar (1.7%), O2 (0.2%), and water vapor (0.03%). Experiments were conducted to measure the effects of pressure, gas composition, and temperature alone or in combination with Mars-normal UV-VIS-NIR light environments. Endospores of B. subtilis, were deposited on aluminum coupons as monolayers in which the average density applied to coupons was 2.47 x 10(6) bacteria per sample. Populations of B. subtilis placed on aluminum coupons and subjected to an Earth-normal temperature (23 degrees C), pressure (1013 mb), and gas mix (normal N2/O2 ratio) but illuminated with a Mars-normal UV-VIS-NIR spectrum were reduced by over 99.9% after 30 sec exposure to Mars-normal UV fluence rates. However, it required at least 15 min of Mars-normal UV exposure to reduce bacterial populations on aluminum coupons to non-recoverable levels. These results were duplicated when bacteria were exposed to Mars-normal environments of temperature (-10 degrees C), pressure (8.5 mb), gas composition (pure CO2), and UV fluence rates. In other experiments, results indicated that the gas composition of the atmosphere and the temperature of the bacterial monolayers at the time of Mars UV exposure had no effects on the survival of bacterial endospores. But Mars-normal pressures (8.5 mb) were found to reduce survival by approximately 20-35% compared to Earth-normal pressures (1013 mb). The primary implications of these results are (a) that greater than 99.9% of bacterial populations on sun-exposed surfaces of spacecraft are likely to be inactivated within a few tens of seconds to a few minutes on the surface of Mars, and (b) that within a single Mars day under clear-sky conditions bacterial populations on sun-exposed surfaces of spacecraft will be sterilized. Furthermore, these results suggest that the high UV fluence rates on the martian surface can be an important resource in minimizing the forward contamination of Mars. c2003 Elsevier Inc. All rights reserved.
(a) Cross-sectional TEM micrograph of 14 period InAs/GaSb SL, demonstrating abrupt interfaces; and (b) Shubnikov-de Haas oscillations testifying high mobility.
Ultrapure minerals separated from eclogite inclusions in kimberlites were analyzed for Sm, Nd, Sr, and oxygen isotopes and for major and trace elements. Clinopyroxene (cpx) and garnet (gnt) are the only primary mineral phases in these rocks, and mineral phases and their alteration products. The WR sub calc. is the reconstructed bulk composition excluding all the contamination influences. Two groups of eclogites: are distinguished: (1) type A Noritic-anorthositic eclogites; and (2) type B Ti-ferrogabbroic eclogites. The oxygen isotopes are primary mantle-derived features of these rocks and are not caused by posteruption processes, as they were measured on unaltered, clean mineral separates and show a correlation with REE pattern and Sr and Nd isotopes. It is suggested that the variation of the oxygen isotopes are caused by crustal-level fluid-rock interaction at relatively low temperature. It is shown that oxygen isotopes variation in MORB basalts caused by the hydrothermal system are in the same range as the observed oxygen isotope variation in eclogites. A model to explain the new set of data is proposed. It is thought that some of these eclogites might be emplaced into the upper lithosphere or lower crust at the time corresponding to their internal isochron age. The calculated WR composition was used to estimate model ages for these rocks.
The Moderate Resolution Imaging Spectroradiometer (MODIS) long-term leaf area index (LAI) products have significantly contributed to global energy fluxes, climate change, and biogeochemistry research. However, the maximum fraction of photosynthetically active radiation absorbed by vegetation (Max-FPAR) compositing strategy of the Collection 6 (C6) products dictates that the main or backup algorithm is always triggered by observations of different quality, which indirectly causes the observed instability in the LAI time-series. Based on MODIS daily LAI retrievals, this study develops a prior knowledge time-series compositing algorithm (PKA) using a linear kernel driven (LKD) model. Our results show that the newly proposed PKA can significantly improve the LAI composites compared to the Max-FPAR strategy using ground-based observations for validation. We found that the PKA performs better than Max-FPAR in various aspects (different sites, seasons, and retrieval index (RI) ranges), with R2 increasing from 0.69 to 0.76 and root means square error (RMSE) decreasing from 1.01 to 0.84 compared to GBOV ground truth. The same improvement was shown for the ground truth LAIs measured at the Honghe and Hailun sites in northeastern China, with R2 increasing from 0.23 to 0.41 and RMSE decreasing from 1.27 to 1.25. In addition, three newly proposed temporal uncertainty metrics (time-series stability, TSS and time-series anomaly, TSA and reconstruction error metric, RE (the proximity to the main RT-based retrievals)) were applied to compare the stability of LAI time-series before and after PKA implementation. We found that the time series stability of PKA LAI was improved, the time series anomalies were reduced, and the retrieval rates of the main algorithm were also greatly enhanced compared to Max-FPAR LAI. A case intercomparison for Max-FPAR-MODIS, Max-FPAR-VIIRS (Visible Infrared Imager Radiometer Suite), and PKA-MODIS LAIs in the Amazon Forest region showed that the PKA is also effective in improving the LAI retrieval over large regions with few qualified observations due to poor atmospheric conditions (RE decreased from 2.37/2.35 (Max-FPAR-MODIS/Max-FPAR-VIIRS) to 2.25 (PKA-MODIS) and RI increased from 61.94%/59.62% to 66.88%). The same improvement was seen in the BELMANIP 2.1 sites for almost all biomes except deciduous broadleaf forest, where the RE decreased from 1.85/2.13 to 1.15 overall. We note that the PKA has the potential to be easily implemented in the operational algorithms of subsequent MODIS and MODIS-like LAI Collections.
The first young giant planet to be discovered by the Gemini Planet Imager was the (is) approximately 2MJ planet 51 Eri b. This approximately 20 Myr old young Jupiter is the first directly imaged planet to show unmistakable methane in H band. To constrain the planet's mass, atmospheric temperature, and composition, the GPI J and H band spectra as well as some limited photometric points were compared to the predictions of substellar atmosphere models. The best fitting models reported in the discovery paper (Macintosh et al. 2015) relied upon a combination of clear and cloudy atmospheric columns to reproduce the data. However for an object as cool as 700 K, the origin of the cloud coverage is somewhat puzzling, as the global silicate and iron clouds would be expected to have sunk well below the photosphere by this effective temperature. While strong vertical mixing in these low gravity atmospheres remains a plausible explanation, we have explored whether atmospheric photochemistry, driven by the UV flux from the primary star, may yield hazes that also influence the observed spectrum of the planet. To explore this possibility we have modeled the atmospheric photochemistry of 51 Eri b using two state-of-the-art photochemical models, both capable of predicting yields of complex hydrocarbons under various atmospheric conditions. In our presentation we will summarize the modeling approach employed to characterize 51 Eri b, explaining constraints on the planet's effective temperature, gravity, and atmospheric composition and also present results of our studies of atmospheric photochemistry. We will discuss whether photochemical hazes could indeed be responsible for the particulate opacity that apparently sculpts the spectrum of the planet.
The literature on all OB associations was reviewed, and their IRAS point source content was studied, between galactic longitude 55 and 150 deg. Only one third of the 24 associations listed by Ruprecht et al. (1981) have been the subject of individual studies designed to identify the brightest stars. Distances to all of these were recomputed using the method of cluster fitting of the B main sequence stars, which makes it poossible to reexamine the absolute magnitude calibration of the O stars, as well as for the red supergiant candidate stars. Also examined was the composite HR diagram for these associations. Associations with the best defined main sequences, which also tend to contain very young clusters, referred to here as OB clusters, have extremely few evolved B and A or red supergiants. Associations with poorly defined main sequences and few OB clusters have many more evolved stars. They also show an effect in the upper HR diagram referred to as a ledge by Fitzpatrick and Garmany (1990) in similar data for the Large Magellanic Cloud. It is suggested that the differences in the associations are not just observational selection effects but represent real differences in age and formation history.
The Mars Science Laboratory (MSL) was protected during its atmospheric entry by an instrumented heatshield that used NASA's Phenolic Impregnated Carbon Ablator (PICA) material [1]. PICA is a lightweight carbon fiber/polymeric resin material that offers outstanding performance for protecting probes during planetary entry. Data from the Mars Entry Descent and Landing Instrument (MEDLI) suite on MSL offers unique in-flight validation data for models of material response and atmospheric entry. MEDLI recorded, among other things, time-resolved in-depth temperature data of PICA using thermocouple sensors assembled in the MEDLI Integrated Sensor Plugs (MISP) [2]. A space-grade silicone-based coating commercially known as NuSil CV-1144-0 [3] was applied to the entire MSL heatshield, including the MEDLI plugs, to mitigate the spread of dust from PICA. Modeling the thermal response of PICA-NuSil (PICA-N) system is still an open challenge. Ground testing of PICA-N models exhibited surface temperature jumps of the order of 150 K due to oxide scale formation and sub-sequent NuSil burn-off. It is therefore critical to include a validated model for the material response of the coating in engineering codes. A test campaign has been conducted at the NASA’s Langley HyMETS [4] facility to screen the response of PICA-N and gather detailed data on its behavior [5]. A first model of PICA-N thermal response has been developed using the Hy-METS experiments [6]. The objective of this work is to analyze the material response of the latest PICA-N model compared to the engineering model used to simulate the entry of MSL. The environment and material response around the MSL aeroshell during Mars atmospheric entry is simulated using a collection of tools. The Direct Simulation Monte Carlo SPARTA code [7] is used in the rarefied regime, the Data Parallel Line Relaxation (DPLR) code [8] is used in the continuum regime and radiative heating conditions are provided by the Nonequilibrium air radiation (NEQAIR) code [9] to estimate the environmental conditions. The thermal response inside the material is computed using the Porous material Analysis Toolbox based on Open-FOAM (PATO) [10,11,12]. Thermodynamic and chemistry properties are estimated using the Mutation++ library [13]. The approach implemented in PATO as a first cut PICA-N thermal response model is outlined in Figure 1. While the recession is less than the coating thickness, the Surface mass and energy balance Boundary Condition (SBC) uses the NuSil B’ tables. Once the recession removes the coating, the usual PICA B’ tables are used for the SBC. The B’ tables are computed using an equilibrium solver implemented in Mutation++, given the temperature, pressure, blowing rate, composition of the pyrolysis and environment gases, and the condensed species at the surface. Preliminary results of the 3D material response of the MSL heat-shield at the peak heating (80 sec after Entry Interface) are shown in Figure 2. Current NASA’s mission to Mars, Mars 2020, used the spare heatshield of MSL for thermal protection during entry, descent, and landing. In preparation for Mars 2020 post-flight analysis, the PATO high-fidelity material response capability was benchmarked against flight data from MEDLI. This effort represents an important milestone toward the development of validated predictive capabilities for designing thermal protection systems for planetary probes. This bench-marking is awaiting the final release of the MEDLI-2 data.
Not Available
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
A review is given of current knowledge of low-energy cosmic ray particles produced in the solar system. It is argued that the notion that the sun alone can accelerate particles in the solar system must be abandoned in light of evidence that Jupiter and earth may be sources of observed low-energy particles. Measurements of the composition and energy spectra of low-energy particles during quiet times are examined, emphasizing the abundance of protons and helium and of anomalous N, O, and Ne. The abundance of heavy particles (B, C, N, O, Ne, Ca and Fe) of unknown origin in the earth magnetosphere is examined. Reported observations of Jovian electrons are discussed and solar particle events with anomalous compositions (He-3 rich events and Fe rich events) are treated in detail. Nuclear abundances of solar particles, emphasizing their temporal and spatial variations are considered together with the nature of nuclear reaction products in solar flares.
Aerosol particles were collected using a four-stage Size and Time-resolved Aerosol Collector (STAC) during the SAIL field campaign. Each stage of STAC separates particles into distinct aerodynamic size fractions with 50% cut-off diameters: Stage A: 2.27 µm Stage B: 0.615 µm Stage C: 0.421 µm Stage D: 0.119 µm Each stage provides both size- and time-resolved sampling, enabling investigation of particle composition across different atmospheric regimes. Only a subset of samples was selected for analysis based on prevailing meteorological conditions (e.g., temperature, humidity, and air-mass influence) to capture representative aerosol types under distinct weather patterns. Collected substrates were first examined under Scanning Electron Microscopy (SEM) to evaluate particle loading, morphology, and spatial distribution. Subsequently, Computer-Controlled Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy (CCSEM/EDX) was performed to obtain size-resolved elemental composition of individual particles. A rule-based classification scheme was applied to categorize particles into major compositional groups (e.g., biological, carbonaceous, dust, sulfate, Na-rich, and mixed types). This dataset provides high-resolution morphological and chemical information on atmospheric particles collected during the SAIL campaign, offering insights into the influence of meteorology on aerosol composition and mixing state.