SEARCH · Engineering Papers

Results for “Combustion modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

All sources NASA NTRS DOE OSTI

NASA NTRS1979

Autoignition of hydrogen injected transverse to a supersonic airstream

A parametric study of autoignition characteristics of transverse fuel injector patterns for a hydrogen-fueled, supersonic-combustion ramjet was conducted in direct-connect tests over a range of simulated hypersonic flight conditions. Autoignition limits, defined directly by visual observations and indirectly by measured wall pressure and temperature, are compared with a semi-empirical ignition limit model which accounts for first order effects on autoignition. It is shown that to initiate combustion in the immediate region of the fuel injector, ignition must occur in the separation region ahead of the fuel jet. Autoignition within this separation zone exhibits strong dependence on flow pressure and temperature, injector diameter, local boundary layer energy thickness, wall temperature, and on fluid dynamic interactions with adjacent downstream facing steps (such as inlet isolation steps). Secondary effects are also discussed. The empirical model is used to define limits of test temperature, pressure, and scale required for autoignition in a current subscale engine test program.

Mcclinton, C. R.↗

NASA NTRS1976

Oscillatory combustion of liquid monopropellant droplets

A theoretical investigation was conducted on the open-loop combustion response of monopropellant droplets and sprays to imposed pressure oscillations. The theoretical model was solved as a perturbation analysis through first order, yielding linear response results. Unsteady gas phase effects were considered in some cases, but the bulk of the calculations assumed a quasi-steady gas phase. Calculations were conducted using properties corresponding to hydrazine decomposition. Zero-order results agreed with earlier measurements of hydrazine droplet burning in combustion gases. The droplet response was greatest (exceeding unity in some cases) for large droplets with liquid phase temperature gradients; at frequencies near the characteristic frequency of the liquid phase thermal wave. The response of a spray is less than that of its largest droplet, however, a relatively small percentage of large droplets provides a substantial response (exceeding unity in some cases).

Chanin, S. P.↗

NASA NTRS1993

Predicting ground level impacts of solid rocket motor testing

Beginning in August of 1988 and continuing until the present, NASA at Stennis Space Center, Mississippi has conducted environmental monitoring of selected static test firings of the solid rocket motor used on the Space Shuttle. The purpose of the study was to assess the modeling protocol adapted for use in predicting plume behavior for the Advanced Solid Rocket Motor that is to be tested in Mississippi beginning in the mid-1990's. Both motors use an aluminum/ammonium perchlorate fuel that produces HCl and Al2O3 particulates as the major combustion products of concern. A combination of COMBUS.sr and PRISE.sr subroutines and the INPUFF model are used to predict the centerline stabilization height, the maximum concentration of HCl and Al2O3 at ground level, and distance to maximum concentration. Ground studies were conducted to evaluate the ability of the model to make these predictions. The modeling protocol was found to be conservative in the prediction of plume stabilization height and in the concentrations of the two emission products predicted.

Douglas, Willard L.↗

NASA NTRS2001

Simulation of Combustion Systems with Realistic g-Jitter

A number of facilities are available for microgravity combustion experiments: aircraft, drop towers, sounding rockets, the space shuttle, and, in the future, the International Space Station (ISS). Acceleration disturbances or g-jitter about the background level of reduced gravity exist in all these microgravity facilities. While g-jitter is routinely measured, a quantitative comparison of the quality of g-jitter among the different microgravity facilities, in terms of its affects on combustion experiments, has not been compiled. Low frequency g-jitter (< 1 Hz) has been repeatedly observed to disturb a number of combustion systems. Guidelines regarding tolerable levels of acceleration disturbances for combustion experiments have been developed for use in the design of ISS experiments. The validity of these guidelines, however, remains unknown. In this project a transient, 3-D numerical model is under development to simulate the effects of realistic g-jitter on a number of combustion systems. The measured acceleration vector or some representation of it can be used as input to the simulation.

Mell, W. E.↗

NASA NTRS1988

Analysis of 5 KHz combustion instabilities in 40K methane/LOX combustion chambers

In 40K methane/LOX 5 KHz engine tests, (first transverse mode) combustion instabilities observed by Rocketdyne are analyzed using Heidmann and Wieber's vaporization model to include LOX flow oscillations. The LOX flow oscillations are determined by including acoustic waves in the feed system analysis. The major parameter controlling stability is the distance (or time delay) associated with atomizing the LOX stream in the coaxial injection system. Results of the analysis that show the influence of mixture ratio, oxidizer and fuel injection velocities, burning time and combustion chamber/injector dimensions on stability are used to explain the existing data. Calculated results to predict the influence of design changes being made for the next set of experiments are also presented.

Breisacher, Kevin J.↗

NASA NTRS2000

A Model For The Burning of Teflon

Teflon has been identified as suitable material for use in oxygen-enriched atmospheres because of its low specific enthalpy of combustion that is, less than 1500 cal/gram. However, once ignited, Teflon burns in a heterogeneous reaction until total consumption or depletion of oxygen occurs. A model is developed for the burning of Teflon in pure, high-pressure oxygen, 3.4 to 68.9 MPa. The Teflon polymer chain dissociates via monomer units due to pyrolysis. These monomer units diffuse to the surface due to free convection. The model consists of coupled mass and energy balances for the polymer and an energy balance for the free convection of product gases. The model is used to obtain appropriate kinetic parameters for the dissociation and surface reactions. The model is validated against experimental measurements of Teflon discs supported on aluminum rods (2216) at oxygen pressures of 3.4, 6.8, 34.4, and 68.9 MPa. The model simulates the temperature distribution in the product gases above burning Teflon.

Waller, Jess M.↗

NASA NTRS1983

Numerical solution of the problem of flame propagation by the use of the random element method

A numerical, grid-free algorithm is presented for one-dimensional reaction-diffusion model of laminar flame propagation in premixed gases. It is based on the random element method we developed for the analysis of diffusional processes. The effect of combustion is taken into account by applying the principle of fractional steps to separate the process of diffusion, modeled by the random walk of computational elements, from the exothermic effects of chemical reaction, monitoring their strength. The validity of the algorithm is demonstrated by application to flame propagation problems for which exact solutions exist. The flame speed evaluated by its use oscillates around the exact value at a relatively small amplitude, while the temperature and species concentration profiles are self-correcting in their convergence to the exact solution. A satisfactory resolution is obtained by the use of quite a small number of computational elements which automatically adjust their distribution of fit sharp gradients.

Ghoniem, A. F.↗

NASA NTRS2008

Multi-Decadal Variation of Aerosols: Sources, Transport, and Climate Effects

We present a global model study of multi-decadal changes of atmospheric aerosols and their climate effects using a global chemistry transport model along with the near-term to longterm data records. We focus on a 27-year time period of satellite era from 1980 to 2006, during which a suite of aerosol data from satellite observations, ground-based measurements, and intensive field experiments have become available. We will use the Goddard Chemistry Aerosol Radiation and Transport (GOCART) model, which involves a time-varying, comprehensive global emission dataset that we put together in our previous investigations and will be improved/extended in this project. This global emission dataset includes emissions of aerosols and their precursors from fuel combustion, biomass burning, volcanic eruptions, and other sources from 1980 to the present. Using the model and satellite data, we will analyze (1) the long-term global and regional aerosol trends and their relationship to the changes of aerosol and precursor emissions from anthropogenic and natural sources, (2) the intercontinental source-receptor relationships controlled by emission, transport pathway, and climate variability.

Chin, Mian↗

NASA NTRS1977

Modeling the complete Otto cycle: Preliminary version

A description is given of the equations and the computer program being developed to model the complete Otto cycle. The program incorporates such important features as: (1) heat transfer, (2) finite combustion rates, (3) complete chemical kinetics in the burned gas, (4) exhaust gas recirculation, and (5) manifold vacuum or supercharging. Changes in thermodynamic, kinetic and transport data as well as model parameters can be made without reprogramming. Preliminary calculations indicate that: (1) chemistry and heat transfer significantly affect composition and performance, (2) there seems to be a strong interaction among model parameters, and (3) a number of cycles must be calculated in order to obtain steady-state conditions.

Zeleznik, F. J.↗

NASA NTRS1977

Modeling the complete Otto cycle - Preliminary version

Zeleznik, F. J.↗

NASA NTRS1991

User's manual for rocket combustor interactive design (ROCCID) and analysis computer program. Volume 1: User's manual

The user's manual for the rocket combustor interactive design (ROCCID) computer program is presented. The program, written in Fortran 77, provides a standardized methodology using state of the art codes and procedures for the analysis of a liquid rocket engine combustor's steady state combustion performance and combustion stability. The ROCCID is currently capable of analyzing mixed element injector patterns containing impinging like doublet or unlike triplet, showerhead, shear coaxial, and swirl coaxial elements as long as only one element type exists in each injector core, baffle, or barrier zone. Real propellant properties of oxygen, hydrogen, methane, propane, and RP-1 are included in ROCCID. The properties of other propellants can easily be added. The analysis model in ROCCID can account for the influence of acoustic cavities, helmholtz resonators, and radial thrust chamber baffles on combustion stability. ROCCID also contains the logic to interactively create a combustor design which meets input performance and stability goals. A preliminary design results from the application of historical correlations to the input design requirements. The steady state performance and combustion stability of this design is evaluated using the analysis models, and ROCCID guides the user as to the design changes required to satisfy the user's performance and stability goals, including the design of stability aids. Output from ROCCID includes a formatted input file for the standardized JANNAF engine performance prediction procedure.

Muss, J. A.↗

NASA NTRS1977

Thermal radiation model for solid rocket booster plumes

The Monte Carlo method is used to model the thermal radiation field of the plumes for the dual solid rocket boosters astride the Space Shuttle launch configuration. The model accounts for axial and radial variations in radiative properties of the plumes. The plumes are considered to be composed of a dispersion of aluminum oxide (Al2O3) particles immersed in the gaseous products of combustion. The principal emitting gases are taken to be CO, CO2, H2O, and HCl. The thermal model is based on local thermodynamic equilibrium. Scattering of radiant energy by Al2O3 particles may be treated as isotropic or anisotropic. Sample radiant heating rates to the base region of the Space Shuttle are shown. Space Shuttle geometries are simulated as combinations of quadric surfaces.

Watson, G. H.↗

NASA NTRS2005

Modeling and Diagnostic Software for Liquefying-Fuel Rockets

A report presents a study of five modeling and diagnostic computer programs considered for use in an integrated vehicle health management (IVHM) system during testing of liquefying-fuel hybrid rocket engines in the Hybrid Combustion Facility (HCF) at NASA Ames Research Center. Three of the programs -- TEAMS, L2, and RODON -- are model-based reasoning (or diagnostic) programs. The other two programs -- ICS and IMS -- do not attempt to isolate the causes of failures but can be used for detecting faults. In the study, qualitative models (in TEAMS and L2) and quantitative models (in RODON) having varying scope and completeness were created. Each of the models captured the structure and behavior of the HCF as a physical system. It was noted that in the cases of the qualitative models, the temporal aspects of the behavior of the HCF and the abstraction of sensor data are handled outside of the models, and it is necessary to develop additional code for this purpose. A need for additional code was also noted in the case of the quantitative model, though the amount of development effort needed was found to be less than that for the qualitative models.

Poll, Scott↗

NASA NTRS1987

A subsonic to Mach 5.5 subscale engine test facility

The NASA-Langley Mach 4 facility, in which air-hydrogen combustion is used to heat the test gas, was modified to make the facility suitable for tests of ramjet-type models at subsonic and transonic, as well as supersonic, Mach numbers. The construction details and the instrumentation of this facility, designated the Combustion-Heated Scramjet Test Facility, are described, and modifications to enhance the test capability range from the subsonic/transonic and Mach 3.5 to 5.5 are discussed. Design diagrams and test result graphs are included.

Andrews, Earl H., Jr.↗

NASA NTRS1979

Analysis of Combustion Instability in Liquid Fuel Rocket Motors

The development of a technique to be used in the solution of nonlinear velocity-sensitive combustion instability problems is described. The orthogonal collocation method was investigated. It found that the results are heavily dependent on the location of the collocation points and characteristics of the equations, so the method was rejected as unreliabile. The Galerkin method, which has proved to be very successful in analysis of the pressure sensitive combustion instability was found to work very well. It was found that the pressure wave forms exhibit a strong second harmonic distortion and a variety of behaviors are possible depending on the nature of the combustion process and the parametric values involved. A one-dimensional model provides further insight into the problem by allowing a comparison of Galerkin solutions with more exact finite-difference computations.

Wong, K. W.↗

NASA NTRS1980

Analysis of NASA JP-4 fire tests data and development of a simple fire model

The temperature, velocity and species concentration data obtained during the NASA fire tests (3m, 7.5m and 15m diameter JP-4 fires) were analyzed. Utilizing the data analysis, a sample theoretical model was formulated to predict the temperature and velocity profiles in JP-4 fires. The theoretical model, which does not take into account the detailed chemistry of combustion, is capable of predicting the extent of necking of the fire near its base.

Raj, P.↗

NASA NTRS1985

Supersonic combustion of a silane/methane mixture

A test program was conducted to evaluate the ignition and combustion characteristics of a 20 volume percent silane/methane mixture using a model scramjet combustor with Mach 2 combustor entrance conditions. The test gas total temperature was varied from 1200 to 3900 R. The mixture autoignited at a total temperature of 1650 R. This autoignition temperature can be contrasted with 2330 R for hydrogen and 1350 R for a 20 percent silane/hydrogen mixture in similar hardware. Methane without the silane additive did not autoignite in this configuration at temperatures as high as 3900 R.

Northam, G. B.↗

NASA NTRS1986

Mass and momentum turbulent transport experiments with swirling confined coaxial jets. II

An experimental study of mixing downstream of swirling coaxial jets discharging into an expanded duct was conducted to obtain data for the evaluation and improvement of turbulent transport models currently used in a variety of computational procedures throughout the combustion community. A combination of laser velocimeter and laser induced fluorescence techniques was employed to obtain mean and fluctuating velocity and concentration distributions at selected axial and radial locations throughout the flow field. Flow visualization techniques were also employed to determine qualitatively the time dependent characteristics of the flow and the scale of turbulence. Simultaneous two component velocity and concentration/velocity measurements provided data which were used to determine the average momentum and mass transport rates for each of three measurement planes. Mixing for swirling flows occurred in several steps of axial and radial mean convective flow and was completed in one-third the length required for nonswirling flow. Comparison of the mass and momentum transport processes for swirling and nonswirling flows indicated that large differences existed in these processes between the two flows.

Roback, R.↗