Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Diffusion in the system K2O-SrO-SiO2. II - Cation self-diffusion coefficients.

The self-diffusion coefficients were measured by introducing a slab of glass previously irradiated in a reactor between two slabs of unirradiated glass. By heating the specimens, etching them sequentially and determining the radioactivity, self-diffusion coefficients for K and Sr were measured. It is pointed out that the results obtained in the investigations appear to support the proposal that the network of the base glass predominantly controls the activation energy for the diffusion of ions.

Varshneya, A. K.↗

Collisional-rate coefficients for sodiumlike Ar VIII ions.

Determination of collisional-excitation-rate coefficients for sodium-like Ar VIII ions theoretically using the Coulomb-Born approximation as well as experimentally from the absolute intensities of lines emitted by these ions in well-diagnosed plasmas whose parameters were obtained from the analysis of scattered laser light. These plasmas were produced in a theta-pinch device. The agreement between theory and experiment is within the estimated accuracy of plus or minus 50% for excitation from the ground state to the n = 3 and n = 4 levels, whereas some deviations are observed for two transitions to the n = 5 levels at lower temperatures. A rate coefficient for ionization was obtained from the time dependence of the ionization.

Datla, R. U.↗

Spectral absorption coefficients of argon and silicon and spectral reflectivity of aluminum

A theoretical investigation was conducted to estimate the spectral properties of argon as a function of pressure, temperature, and wave number. The spectral characteristics of the argon buffer gas exert a strong influence on radiative energy transfer in the in-reactor test configuration of the nuclear light bulb engine. An existing computer program was modified and used to calculate the spectral absorption coefficients of argon at total pressures of 50, 100, 250, 500, 750 and 1000 atm in the temperature interval between 1000 and 30,000 K. At each pressure and temperature, spectral properties were calculated for forty-seven wave numbers in the interval between 1000 and 1,000,000 cm/1. Estimates of the spectral absorption coefficients of silicon were made as part of an evaluation of silicon vapor as a possible buffer-gas seeding agent for the reference nuclear light bulb engine. Existing cross-section data were used to calculate the spectral characteristics of silicon at twenty-four temperatures in the interval between 2000 and 10,000 K.

Krascella, N. L.↗

Drag coefficients for spheres in free molecular flow in O at satellite velocities

The drag coefficients for the Echo 1 and Explorer 24 spherical surfaces in an O environment were experimentally determined over an energy range of 4 to 200 eV. The experiment was performed by generating a beam of atomic oxygen ions of the proper energy, neutralizing a portion of the beam, and then allowing only the neutral O particles to strike a very sensitive torsion balance. The momentum transferred to the surface was determined from the deflection of the torsion balance. At the lower energies, the more intense ion beam had to be used instead of the neutral beam. The drag coefficients are found to be slightly greater than 2 at energies corresponding to satellite velocities.

Boring, J. W.↗

The emission coefficient of uranium plasmas

The emission coefficient for uranium plasmas (Temperature: 8000 K) was measured for the wavelength range (200 A - 6000 A). The results are compared to theory and other measurements. The absorption coefficient for the same wavelength interval is also given.

Schneider, R. T.↗

A parametric study of planform and aeroelastic effects on aerodynamic center, alpha- and q- stability derivatures. Appendix B: Method for computing the strucutral influence coefficient matrix of nonplanar wing body tail configurations

The method used in computing the structural influence coefficient matrix of the computer program of Reference 1 (appendix A of the Summary Report) is reported. This matrix is computed for complete wing-body-tail configurations by assuming that all major airplane components can be structurally represented by a slender beam called the elastic axis. A structural influence coefficient is defined as the rotation about the Y-stability axis at panel j induced by a unit load on panel k. A description of how a structural breakdown is performed in detail is included.

Roskam, J.↗

Heat transfer coefficients of dilute flowing gas-solids suspensions

Heat transfer coefficients of air-glass, argon-glass, and argon-aluminum suspensions were measured in horizontal and vertical tubes. The glass, 21.6 and 36.0 micron diameter particles, was suspended at gas Reynolds numbers between 11,000 and 21,000 and loading ratios between 0 and 2.5. The presence of particles generally reduced the heat transfer coefficient. The circulation of aluminum powder in the 0.870 inch diameter closed loop system produced tenacious deposits on protuberances into the stream. In the vertical test section, the Nusselt number reduction was attributed to viscous sublayer thickening; in the horizontal test section to particle deposition.

Kane, R. S.↗

Local skin friction coefficients and boundary layer profiles obtained in flight from the XB-70-1 airplane at Mach numbers up to 2.5

Boundary-layer and local friction data for Mach numbers up to 2.5 and Reynolds numbers up to 3.6 x 10 to the 8th power were obtained in flight at three locations on the XB-70-1 airplane: the lower forward fuselage centerline (nose), the upper rear fuselage centerline, and the upper surface of the right wing. Local skin friction coefficients were derived at each location by using (1) a skin friction force balance, (2) a Preston probe, and (3) an adaptation of Clauser's method which derives skin friction from the rake velocity profile. These three techniques provided consistent results that agreed well with the von Karman-Schoenherr relationship for flow conditions that are quasi-two-dimensional. At the lower angles of attack, the nose-boom and flow-direction vanes are believed to have caused the momentum thickness at the nose to be larger than at the higher angles of attack. The boundary-layer data and local skin friction coefficients are tabulated. The wind-tunnel-model surface-pressure distribution ahead of the three locations and the flight surface-pressure distribution ahead of the wing location are included.

Fisher, D. F.↗

Estimation of bounds for the geopotential coefficients

A numerical analysis of zonal geopotential coefficients and the bounds on the tesseral coefficients is presented. Modifications designed to incorporate data on the earth's density distribution are developed. The nature of the modifications and the application are discussed.

Payne, M. H.↗

Composition dependence of ion transport coefficients in gas mixtures

A simple momentum-transfer theory for the composition dependence of ion mobilities and diffusion coefficients in gas mixtures at arbitrary field strengths is corrected, extended, and compared with a similar theory based on momentum and energy transfer, and with results based on direct solution of the Boltzmann equation by Kihara's method. Final equations are recommended for predicting composition dependences, given only results on ion mobilities and diffusion coefficients in the pure component gases.

Whealton, J. H.↗

Pressure-loss and flow coefficients inside a chordwise-finned, impingement, convection, and film air-cooled turbine vane

Total-pressure-loss coefficients, flow discharge coefficients, and friction factors were determined experimentally for the various area and geometry changes and flow passages within an air-cooled turbine vane. The results are compared with those of others obtained on similar configurations, both actual and large models, of vane passages. The supply and exit air pressures were controlled and varied. The investigation was conducted with essentially ambient-temperature air and without external flow of air over the vane.

Hippensteele, S. A.↗

Low temperature coefficient of resistance and high gage factor in beryllium-doped silicon

The gage factor and resistivity of p-type silicon doped with beryllium was studied as a function of temperature, crystal orientation, and beryllium doping concentration. It was shown that the temperature coefficient of resistance can be varied and reduced to zero near room temperature by varying the beryllium doping level. Similarly, the magnitude of the piezoresistance gage factor for beryllium-doped silicon is slightly larger than for silicon doped with a shallow acceptor impurity such as boron, whereas the temperature coefficient of piezoresistance is about the same for material containing these two dopants. These results are discussed in terms of a model for the piezoresistance of compensated p-type silicon.

Robertson, J. B.↗

Concerning the damping coefficients of exterior building elements for aerial noise

The values employed to define the sound reduction coefficient of exterior walls for aerial noise do not take into account the continuous increase in the outside noise level nor its energy variation as a function of time. These aspects are analyzed by estimating the outside and inside noise levels on the basis of calculating an equivalent noise (L sub ech), a level with a maximum duration and the values of L sub 10, L sub 50 and L sub 90. The values obtained permit determination of the wall's sound reduction coefficients that are compared with those obtained by the customary method. It is shown that the sound reduction values of the wall coincide for the case of sound levels with a maximum duration and the values of L sub 90.

Pocsa, V.↗

Viscosity and thermal conductivity coefficients of gaseous and liquid oxygen

Equations and tables are presented for the viscosity and thermal conductivity coefficients of gaseous and liquid oxygen at temperatures between 80 K and 400 K for pressures up to 200 atm. and at temperatures between 80 K and 2000 K for the dilute gas. A description of the anomalous behavior of the thermal conductivity in the critical region is included. The tabulated coefficients are reliable to within about 15% except for a region in the immediate vicinity of the critical point. Some possibilities for future improvements of this reliability are discussed.

Hanley, H. J. M.↗

Discharge coefficient correlations for circular-arc venturi flowmeters at critical /sonic/ flow

Experimental data are analyzed to support theoretical predictions for discharge coefficients in circular-arc venturi flow meters operating in the critical sonic flow regime at throat Reynolds numbers above 150 thousand. The data tend to verify the predicted 0.25% decrease in the discharge coefficient during transition from a laminar to turbulent boundary layer. Four different test gases and three flow measurement facilities were used in the experiments with 17 venturis with throat sizes from 0.15 to 1.37 in. and Beta ratios ranging from 0.014 to 0.25. Recommendations are given as to how the effectiveness of future studies in the field could be improved.

Arnberg, B. T.↗

Composition dependence of ion-transport coefficients in gas mixtures

Simple momentum-transfer theory for the composition dependence of ion mobilities and diffusion coefficients in gas mixtures at arbitrary field strengths is corrected and extended, and compared with a similar theory based on momentum and energy transfer, and with results based on direct solution of the Boltzmann equation by Kihara's method. Final equations are recommended for predicting composition dependences, given only results on ion mobilities and diffusion coefficients in the pure component gases.

Whealton, J. H.↗

Absorption coefficients of a hydrogen plasma for laser radiation

The formalism for the calculation of the absorption of radiation by a hydrogen plasma at common laboratory conditions is summarized. The hydrogen plasma absorption coefficient for laser radiation has been computed for a wide range of electron densities and temperatures (10,000-40,000 K). The results of this computation are presented in a graphical form that permits a determination of the absorption coefficient for the following laser wavelengths: 0.176, 0.325, 0.337, 0.442, 0.488, 0.515, 0.633, 0.694, 1.06, 1.15, 2.36, 3.39, 5.40 and 10.6 microns. The application of these results and laser radiation absorption measurements to plasma diagnostics is discussed briefly.

Stallcop, J. R.↗

A relation between cosmic-ray fluctuations, gradient, and diffusion coefficient

The motion of charged particles in a stochastic magnetic field is considered via a generalized quasi-linear expansion of Liouville's equation. The result is an equation relating cosmic-ray scintillations to particle gradients and to magnetic-field fluctuations (or diffusion coefficient). The resulting theory may be regarded as an example of a fluctuation-dissipation phenomenon, in which the diffusion coefficient plays the role of the dissipative parameter. The resonant interaction between particles and the random interplanetary magnetic field is considered explicitly, and it is shown that observed scintillations of high-energy (about 1 GeV) cosmic rays may be reasonably explained by the model.

Owens, A. J.↗