Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cloud profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Spaceborne Radar Would Measure Rain And Clouds

Report describes conceptual design of spaceborne radar system mapping precipitation and clouds at mid-latitudes to provide data for research on global weather and climate. Radar operates at two frequencies. Lower (35 GHz) provides vertical profiles of rainfall at rates up to 20 mm/h and enables probing of cirrus clouds. Higher (94 GHz) enables detection and quantitative measurements of clouds of all types and provides rain profiles at rates up to 10 mm/h.

Im, Eastwood↗

An Observational Comparison of Level of Neutral Buoyancy and Level of Maximum Detrainment in Tropical Deep Convective Clouds

Tropical deep convective clouds are important drivers of large-scale atmospheric circulation representing the main vertical transport pathway through the depth of the troposphere for heat, momentum, water, and chemical species. The strength and depth of this transport are impacted by the convective updraft size and intensity that are driven by buoyancy, dynamical forcing, and mixing of environmental air, i.e., entrainment. In this paper, we identify tropical deep convective systems with well-defined forward anvils using Atmospheric Radiation Measurement (ARM) ground-based profiling radars, at three ARM fixed-sites in the Tropical Western Pacific (TWP; i.e., Manus, Nauru, Darwin) and three ARM Mobile Facility deployments in Niamey, Niger; Gan Island, Maldives; and Manacapuru, Brazil. We use the difference between the level of neutral buoyancy (LNB) and the level of maximum detrainment (LMD) as a proxy for the effective bulk convective entrainment (εproxy). The LNB, the theoretical height that a parcel raised above the level of free convection would reach with no mixing, is calculated based on pre-convection radiosonde measurements using parcel theory. The LMD is the height of the maximum reflectivity observed in forward anvil clouds by profiling radars. Deep convective systems over the TWP show higher LNBs that extend to 16.3 km on average and larger εproxy (median LNB minus LMD up to 6.5 km) compared to their continental counterparts in the Amazon and West Africa. Oceanic conditions show larger convective available potential energy (CAPE) coupled with higher moisture at low levels which favors larger εproxy. In contrast, continental cases initiate and develop under high convective inhibition, steeper environmental lapse rate, and high wind shear conditions, which show smaller offset between LNB and LMD. Deep convective cases that promote significant cold pools at the surface experience less εproxy. Using a Random Forest regression algorithm, CAPE is associated with the highest feature importance score for predicting convective εproxy, followed by low-level relative humidity. For continental cases, the low-level wind shear also indicates higher importance.

54 ENVIRONMENTAL SCIENCES↗

Connecting the Radiative Influences of Aerosol upon the Mass Flux Profiles of Shallow Cumuli across the Southeast Atlantic Ocean Basin and its Boundaries (Final Report)

The Atlantic Ocean covers approximately 25% of Earth’s surface and the atmosphere above it is home to a complex array of clouds and aerosols that have important influences on regional and global weather and climate. These influences must be accurately depicted in short range, medium range, seasonal, and climate forecast models. Conditions over the tropical Atlantic are particularly complex due to continental scale plumes of dust from the Sahara Desert and smoke from agricultural burning in Africa that drift across the Atlantic Ocean basin toward the Americas. These plumes are often found meandering in the lower atmosphere above shallow tropical clouds that form above the ocean surface, presumably mingling with these clouds on occasion due to convective mixing processes. Elevated dust and smoke particles absorb incoming sunlight and substantially warm the marine atmosphere in the layer in which they are present. This warming may alter the thermal stability of the marine atmosphere and may throttle or enhance the development of clouds, change their internal structure and the rate at which they precipitate. Alternatively, it may isolate the lower atmosphere from drier layers above enabling water vapor to accumulate near the ocean surface potentially leading to the development of deeper convection. Our study was organized around the principal concept of determining the impact of African smoke and dust plumes upon cloud development at ASI and understanding how a popular shallow convection parameterization used in models responds to the presence of this aerosol. We analyzed observations collected during the US Department of Energy (DOE) Layered Atlantic Smoke Interactions with Clouds (LASIC) campaign using the Atmospheric Radiation Measurement Program’s Mobile Facility #1 (AMF-1), which was deployed to Ascension Island (ASI) in Southeastern Atlantic for a one-year period. Ascension Island is immediately downwind from an African source of these plumes, but far enough removed to enable the lower atmosphere to have reacted to their presence. A main goal of our study was to compute radiative heating rate profiles over Ascension Island and along the trajectory from the biomass burning regions along coastal Africa to Ascension Island. To compute the radiative heating rate due to aerosols and clouds, we employed observed profiles of temperature, humidity, and clouds from LASIC alongside aerosol optical properties from the Modern-era Retrospective analysis for Research and Applications Version 2 (MERRA-2), as input for the Rapid Radiation Transfer Model (RRTM). Radiative heating was also assessed across the southeast Atlantic Ocean using an ensemble of back trajectories from the Hybrid Single Particle Lagrangian Integrated Trajectory (HYSPLIT) model. We were successful in this effort and the resulting publication is already being cited despite its relatively short lifetime in the literature. The second part of our study involved the process-level representation of the clouds observed over the Southeastern Atlantic in models. Our initial task, upon which the balance of this portion of the study depended, was to evaluate the representativeness of the clouds observed by AMF-1. What orographic influence did Ascension Island have on the measured cloud structure? We set out to answer this question by trying to separate observations that were clearly indicative of orographic forcing from those that were representative of open ocean. The siting of AMF-1, which was 340-m above sea-level on the slope of a steep escarpment, proved demonstrably problematic for cloud process measurements. Despite considerable effort using multiple approaches including artificial intelligence (AI), we were unable to successfully compensate for the orographic forcing present at the AMF-1 site on ASI and, hence, produce process-level summaries of the convective mass flux representative of open ocean over the Southeastern Atlantic. Even though the project has officially ended, we are making a final attempt using two new types of clustering algorithm (i.e., AI) on the recommendation of a former student, who is an expert in this area. Since we have only recently begun to test these new AI schemes, the recommendations from the second part of our project outlined below are based on our experience at the time of this report.

54 ENVIRONMENTAL SCIENCES↗

Above-Cloud Aerosol Radiative Effects based on ORACLES 2016 and ORACLES 2017 Aircraft Experiments

Determining the direct aerosol radiative effect (DARE) of absorbing aerosols above clouds from satellite observations alone is a challenging task, in part because the radiative signal of the aerosol layer is not easily untangled from that of the clouds below. In this study, we use aircraft measurements from the NASA ObseRvations of CLouds above Aerosols and their intEractionS (ORACLES) project in the southeastern Atlantic to derive it with as few assumptions as possible. This is accomplished by using spectral irradiance measurements (Solar Spectral Flux Radiometer, SSFR) and aerosol optical depth (AOD) retrievals (Spectrometer for Sky-Scanning, Sun-Tracking Atmospheric Research, 4STAR) during vertical profiles (spirals) that minimize the albedo variability of the underlying cloud field – thus isolating aerosol radiative effects from those of the cloud field below. For two representative cases, we retrieve spectral aerosol single scattering albedo (SSA) and the asymmetry parameter (g) from these profile measurements and calculate DARE given the albedo range measured by SSFR on horizontal legs above clouds. For mid-visible wavelengths, we find SSA values from 0.80 to 0.85 and a significant spectral dependence of g. As the cloud albedo increases, the aerosol increasingly warms the column. The transition from a cooling to a warming top-of-aerosol radiative effect occurs at an albedo value (critical albedo) just above 0.2 in the mid-visible wavelength range. In a companion paper, we use the techniques introduced here to generalize our findings to all 2016 and 2017 measurements and parameterize aerosol radiative effects.

Cloud aerosol↗

RACORO continental boundary layer cloud investigations. 2. Large-eddy simulations of cumulus clouds and evaluation with in-situ and ground-based observations

A 60-hour case study of continental boundary layer cumulus clouds is examined using two large-eddy simulation (LES) models. The case is based on observations obtained during the RACORO Campaign (Routine Atmospheric Radiation Measurement [ARM] Aerial Facility [AAF] Clouds with Low Optical Water Depths [CLOWD] Optical Radiative Observations) at the ARM Climate Research Facility's Southern Great Plains site. The LES models are driven by continuous large-scale and surface forcings, and are constrained by multi-modal and temporally varying aerosol number size distribution profiles derived from aircraft observations. We compare simulated cloud macrophysical and microphysical properties with ground-based remote sensing and aircraft observations. The LES simulations capture the observed transitions of the evolving cumulus-topped boundary layers during the three daytime periods, and generally reproduce variations of droplet number concentration with liquid water content (LWC), corresponding to the gradient between the cloud centers and cloud edges at given heights. The observed LWC values fall within the range of simulated values; the observed droplet number concentrations are commonly higher than simulated, but differences remain on par with potential estimation errors in the aircraft measurements. Sensitivity studies examine the influences of bin microphysics versus bulk microphysics, aerosol advection, supersaturation treatment, and aerosol hygroscopicity. Simulated macrophysical cloud properties are found to be insensitive in this non-precipitating case, but microphysical properties are especially sensitive to bulk microphysics supersaturation treatment and aerosol hygroscopicity.

54 ENVIRONMENTAL SCIENCES↗

Airborne lidar measurements of atmospheric CO 2 column concentrations to cloud tops made during the 2017 ASCENDS/ABoVE campaign

We measured the column-averaged atmospheric CO 2 mixing ratio (XCO 2 ) to a variety of cloud tops with an airborne pulsed multi-wavelength integrated path differential absorption (IPDA) lidar during NASA's 2017 ASCENDS/ABoVE airborne campaign. Measurements of height-resolved atmospheric backscatter profiles allow this lidar to retrieve XCO 2 to cloud tops, as well as to the ground, with accurate knowledge of the photon path length. We validated these measurements with those from an onboard in situ CO 2 sensor during spiral-down maneuvers. These lidar measurements were 2–3 times better than those from previous airborne campaigns due to our using a wavelength step-locked laser transmitter and a high-efficiency detector for this campaign. Precisions of 0.6 parts per million (ppm) were achieved for 10 s average measurements to mid-level clouds and 0.9 ppm to low-level clouds at the top of the planetary boundary layer. This study demonstrates the lidar's capability to fill in XCO 2 measurement gaps in cloudy regions and to help resolve the vertical and horizontal distributions of atmospheric CO 2 . Future airborne campaigns and spaceborne missions with this capability can be used to improve atmospheric transport modeling, flux estimation and carbon data assimilation.

Jianping Mao↗

Goddard Latent Heating Retrieval Algorithm for TRMM and GPM

The Goddard Convective-Stratiform Heating (CSH) algorithm has been used to retrieve latent heating (LH) associated with clouds and cloud systems in support of the Tropical Rainfall Measuring Mission (TRMM) and Global Precipitation Measurement (GPM) mission. The CSH algorithm requires the use of a cloud-resolving model (CRM) to simulate LH profiles to build look-up tables (LUTs). In this paper we describe the current V6 CSH and its differences/similarities versus the previous V5 CSH. Long-term CRM simulations are conducted to identify the impact of CRM resolution and the convective-stratiform separation method on LH structure/profiles. The TRMM and GPM Combined algorithm derived surface rainfall rates and their associated precipitation properties are the input to the CSH algorithm. Since there is no direct measurement of LH structure, the performance of the CSH V6 algorithm is examined by comparing its vertically-integrated heating (or equivalent surface rainfall rate) against the surface rainfall rate derived from the TRMM/GPM Combined algorithm. The results suggest the CSH three-month and zonal mean equivalent surface rain rates are in good agreement with the Combined rates over the ITCZ region; the agreement is best over ocean. CSH three-month and zonal mean equivalent surface rain rates are larger than the Combined rates over land in both the tropics and sub-tropics. CSH three-month mean equivalent surface rainfall rates also have local differences with the Combined rates that can be smoothed by area averaging to larger horizontal resolutions (from the CSH standard grid of 0.25° × 0.25° to 0.5° × 0.5° or 1.0° × 1.0°). CSH equivalent surface rainfall rates have more light rain rates but less larger rain rates compared to the GPM Combined surface rain rates.

Latent heating retrieval↗

The Spatial Variation of Water and Ammonia near Jupiter's Great Red Spot

The CSHELL spectrometer at NASA's Infrared Telescope Facility was used in August 1996 to observe Jupiter at 5.18 microns. This wavelength sounds the 3-8 bar region in Jupiter's deep troposphere. A 1-arcsec-wide slit was aligned east-west on Jupiter and stepped from north to south across the Great Red Spot (GRS). Within our spectral bandpass are absorption lines of NH3 and a hot band of CH4. Radiative transfer models indicate that the strength of the CH4 feature is anti-correlated with gaseous H2O between 3 and 6 bars. The CH4 feature is predicted to be very strong for H2O abundances less than 10ppm and it should vanish when H2O > 300ppm. The depths of the observed CH4 and NH3 absorption features varied dramatically near the GRS. The center and east side (planetocentric) of the GRS is dry in both volatiles as indicated by strong CH4 absorption and a weak NH3 line. The CH4 line vanishes and the NH3 feature grows stronger on the west side of the GRS. We interpret this as due to a real variation in both volatiles - H2O and NH3 - due to a common dynamical mechanism. Water clouds are expected to be accompanied by saturated gaseous H2O profiles between 3 and 5 bars. The Galileo imaging team (Banfield et al 1998 Icarus 135, p230) deduced the presence of a cloud near the 4-bar level northwest of the GRS. Our data indicate that this same region is volatile rich; thus the combination of the two datasets provides a compelling case for a water cloud at this location. The deep volatile abundance does not correlate with 5-micron continuum opacity near the GRS. This suggests that the spatial variation of the 5-micron flux near the GRS is due primarily to NH3 clouds, rather than H2O clouds.

Bjoraker, G. L.↗

Numerical sensitivity analysis of passive EHF and SMMW channels to tropospheric water vapor, clouds, and precipitation

Potential uses of specific extremely High Frequency (EHF) and Sub-Millimeter-Wave (SMMW) channels at 90, 166, 183, 220, 325, 340, and 410 GHz for passive spaceborne remote sensing of the troposphere and lower stratosphere are investigated using an iterative numerical radiative transfer model. Collectively, these channels offer potential for high spatial resolution imaging using diffraction-limited apertures of practical size, along with the ability to profile water vapor, map precipitation beneath optically opaque cloud cover, and to measure nonprecipitating cloud (e.g., cirrus) parameters. A widely-spaced set of EHF and SMMW channels can yield observable degrees of freedom related to clouds and precipitation not available by exclusively using the more thoroughly studied microwave channels below 183 GHz. A new passive airborne imaging instrument for tropospheric meteorological sensing is described.

Gasiewski, A. J.↗

TPSAS-NF1676L-33601-DND

The Clouds and the Earth's Radiant Energy System (CERES) project now has over 18 years of an accurately observed top-of-the-atmosphere (TOA) flux record for climate monitoring and diagnostic studies. CERES provides the climate community the following parameters: coincident instantaneous 1? gridded CERES observed TOA fluxes, computed profile and surface fluxes, as well as MODIS cloud and aerosol retrievals. Clouds and radiation interaction one key factor that dominates climate feedbacks and is also the most difficult problem with large uncertainty. To further advance our understanding of the cloud-radiation interaction, the climate community need data with accurate fluxes and their associated cloud properties for both observational and modelling study. The new CERES FluxByCldTyp data product is produced for this purpose. The flux product combines for the first time CERES measured TOA fluxes along with the associated MODIS cloud properties, which links radiative flux directly to a specific cloud type. This was achieved by computing sub-footprint fluxes for the clear-sky and cloudy portions of the CERES footprint. The spatially distributed cloud properties within the CERES footprint were retrieved from 2-km MODIS pixels, that were stratified by cloud type. The sub-footprint fluxes were estimated from MODIS radiances based on empirically derived narrowband to broadband coefficients. The combined sub-footprint fluxes can then be validated with the observed footprint flux. This presentation will focus on the algorithm development of the flux-by-cloud-type product and its validation.

Moguo Sun↗

TPSAS-NF1676L-33753-DND

The Clouds and the Earth's Radiant Energy System (CERES) project now has over 18 years of an accurately observed top-of-the-atmosphere (TOA) flux record for climate monitoring and diagnostic studies. CERES provides the climate community the following parameters: coincident instantaneous 1 gridded CERES observed TOA fluxes, computed profile and surface fluxes, as well as MODIS cloud and aerosol retrievals. Clouds and radiation interaction one key factor that dominates climate feedbacks and is also the most difficult problem with large uncertainty. To further advance our understanding of the cloud-radiation interaction, the climate community need data with accurate fluxes and their associated cloud properties for both observational and modelling study. The new CERES FluxByCldTyp data product is produced for this purpose. The flux product combines for the first time CERES measured TOA fluxes along with the associated MODIS cloud properties, which links radiative flux directly to a specific cloud type. This was achieved by computing sub-footprint fluxes for the clear-sky and cloudy portions of the CERES footprint. The spatially distributed cloud properties within the CERES footprint were retrieved from 2-km MODIS pixels, that were stratified by cloud type. The sub-footprint fluxes were estimated from MODIS radiances based on empirically derived narrowband to broadband coefficients. The combined sub-footprint fluxes can then be validated with the observed footprint flux. This presentation will focus on the algorithm development of the flux-by-cloud-type product and its validation. The paper will also discuss CERES FlxbyCldTyp simulator and its application.

Moguo Sun↗

Computer image processing of up-draft flow motion and severe storm formation observed from satellite

Special rapid-scan satellite visible and infrared observations have been used to study the life cycle of the clouds from the initiation of updraft flow motion in the atmosphere, the condensation of humid air, the formation of clouds, the development of towering cumulus, the penetration of the tropopause, the collapsing of an overshooting turret, and the dissipation of cloud. The infrared image provides an indication of the equivalent blackbody temperature of the observed cloud tops. By referencing the temperature, height and humidity profiles from rawinsonde observations as the background meteorological data for the instability of the air mass to the satellite infrared data sets at different time periods, the development of convective clouds can be studied in detail.

Hung, R. J.↗

Research Scanning Polarimeter (RSP): Retrievals from PODEX and SEAC4RS

We illustrate our methods on examples from the recent NASA's field campaigns POlarimeter Definition EXperiment (PODEX, based in Palmdale, California, January - February 2013) and Studies of Emissions and Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys (SEAC4RS, based in Houston, Texas in August - September 2013). During these campaigns the RSP was onboard the NASA's long-range high-altitude ER-2 aircraft together with an array of other remote sensing instrumentation. Correlative sampling measurements from another aircraft were also available. The data obtained during these campaigns provides an excellent opportunity to study cloud properties in variety of locations and atmospheric conditions. We present examples of boundary layer cumulus and stratocumulus clouds, liquid altostratus clouds, and fogs. In the latter two cases the droplet size distribution derived from RFT analysis exhibited multiple modes corresponding to different cloud layers, as supported by the correlative lidar atmospheric profiles.

climate↗

Derivation of aerosol profiles for MC3E convection studies and use in simulations of the 20 May squall line case

Advancing understanding of deep convection microphysics via mesoscale modeling studies of well-observed case studies requires observation-based aerosol inputs. Here, we derive hygroscopic aerosol size distribution input profiles from ground-based and airborne measurements for six convection case studies observed during the Midlatitude Continental Convective Cloud Experiment (MC3E) over Oklahoma. We demonstrate use of an input profile in simulations of the only well-observed case study that produced extensive stratiform outflow on 20 May 2011. At well-sampled elevations between -11 and -23 °C over widespread stratiform rain, ice crystal number concentrations are consistently dominated by a single mode near ~400 µm in randomly oriented maximum dimension ( D max ). The ice mass at -23 °C is primarily in a closely collocated mode, whereas a mass mode near D max ~1000 µm becomes dominant with decreasing elevation to the -11 °C level, consistent with possible aggregation during sedimentation. However, simulations with and without observation-based aerosol inputs systematically overpredict mass peak D max by a factor of 3–5 and underpredict ice number concentration by a factor of 4–10. Previously reported simulations with both two-moment and size-resolved microphysics have shown biases of a similar nature. The observed ice properties are notably similar to those reported from recent tropical measurements. Based on several lines of evidence, we speculate that updraft microphysical pathways determining outflow properties in the 20 May case are similar to a tropical regime, likely associated with warm-temperature ice multiplication that is not well understood or well represented in models.

54 ENVIRONMENTAL SCIENCES↗

Derivation of Aerosol Profiles for MC3E Convection Studies and Use in Simulations of the 20 May Squall Line Case

Advancing understanding of deep convection microphysics via mesoscale modeling studies of well-observed case studies requires observation-based aerosol inputs. Here, we derive hygroscopic aerosol size distribution input profiles from ground-based and airborne measurements for six convection case studies observed during the Midlatitude Continental Convective Cloud Experiment (MC3E) over Oklahoma. We demonstrate use of an input profile in simulations of the only well-observed case study that produced extensive stratiform outflow on 20 May 2011. At well-sampled elevations between −11 and −23 C over widespread stratiform rain, ice crystal number concentrations are consistently dominated by a single mode near approx. 400 microm in randomly oriented maximum dimension (Dmax). The ice mass at −23 C is primarily in a closely collocated mode, whereas a mass mode near Dmax approx. 1000 microns becomes dominant with decreasing elevation to the −11 C level, consistent with possible aggregation during sedimentation. However, simulations with and without observation-based aerosol inputs systematically overpredict mass peak Dmax by a factor of 3-5 and underpredict ice number concentration by a factor of 4-10. Previously reported simulations with both two-moment and size-resolved microphysics have shown biases of a similar nature. The observed ice properties are notably similar to those reported from recent tropical measurements. Based on several lines of evidence, we speculate that updraft microphysical pathways determining outflow properties in the 20 May case are similar to a tropical regime, likely associated with warm-temperature ice multiplication that is not well understood or well represented in models.

Fridlind, Ann M.↗

Derivation of Aerosol Profiles for MC3E Convection Studies and Use in Simulations of the 20 May Squall Line Case

Advancing understanding of deep convection microphysics via mesoscale modeling studies of well-observed case studies requires observation-based aerosol inputs. Here, we derive hygroscopic aerosol size distribution input profiles from ground-based and airborne measurements for six convection case studies observed during the Midlatitude Continental Convective Cloud Experiment (MC3E) over Oklahoma. We demonstrate use of an input profile in simulations of the only well-observed case study that produced extensive stratiform outflow on 20 May 2011. At well-sampled elevations between -11 and -23 degree C over widespread stratiform rain, ice crystal number concentrations are consistently dominated by a single mode near 400 micrometer in randomly oriented maximum dimension (D[superscript max] ). The ice mass at -23 degree C is primarily in a closely collocated mode, whereas a mass mode near D[superscript max] -1000 micrometer becomes dominant with decreasing elevation to the -11 degree C level, consistent with possible aggregation during sedimentation. However, simulations with and without observation-based aerosol inputs systematically overpredict mass peak D[superscript max] by a factor of 3-5 and underpredict ice number concentration by a factor of 4-10. Previously reported simulations with both two-moment and size-resolved microphysics have shown biases of a similar nature. The observed ice properties are notably similar to those reported from recent tropical measurements. Based on several lines of evidence, we speculate that updraft microphysical pathways determining outflow properties in the 20 May case are similar to a tropical regime, likely associated with warm-temperature ice multiplication that is not well understood or well represented in models.

Fridlind, Ann M.↗

Three-Wavelength Approach for Aerosol-Cloud Discrimination in the Sage III/ISS Aerosol Extinction Dataset

The tropical upper troposphere and lower stratosphere (UTLS) region is dominated by aerosols and clouds affecting Earth’s radiation budget and climate. Thus, satellites’ continuous monitoring and identification of these layers is crucial for quantifying their radiative impact. However, distinguishing between aerosols and clouds is challenging, especially under the perturbed UTLS conditions during post-volcanic eruptions and wildfire events. Aerosol-cloud discrimination is primarily based on their disparate wavelength-dependent scattering and absorption properties. In this study, we use aerosol extinction observations in the tropical (15°N-15°S) UTLS from June 2017 to February 2021, available from the latest generation of the Stratospheric Aerosol and Gas Experiment (SAGE) instrument-SAGE III onboard the International Space Station (ISS) to study aerosols and clouds. During this period, the SAGE III/ISS provided better coverage over the tropics at additional wavelength channels (relative to previous SAGE missions) and witnessed several volcanic and wildfire events that perturbed the tropical UTLS. We explore the advantage of having an extinction coefficient at an additional wavelength channel (1550 nm) from the SAGE III/ISS in aerosol-cloud discrimination using a method based on thresholds of two extinction coefficient ratios, R1R1 (520 nm/1020 nm) and R2R2 (1020 nm/1550 nm). This method was proposed earlier by Kent et al. [Appl. Opt. 36, 8639 (1997) [CrossRef] ] for the SAGE III-Meteor-3M but was never tested for the tropical region under volcanically perturbed conditions. We call this method the Extinction Color Ratio (ECR) method. The ECR method is applied to the SAGE III/ISS aerosol extinction data to obtain cloud-filtered aerosol extinction coefficients, cloud-top altitude, and seasonal cloud occurrence frequency during the entire study period. Cloud-filtered aerosol extinction coefficient obtained using the ECR method revealed the presence of enhanced aerosols in the UTLS following volcanic eruptions and wildfire events consistent with the Ozone Mapping and Profiler Suite (OMPS) and space-borne lidar-Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP). The cloud-top altitude obtained from the SAGE III/ISS is within 1 km of the nearly co-located observations from OMPS and CALIOP. In general, the seasonal mean cloud-top altitude from the SAGE III/ISS events peaks during the December, January, and February months, with sunset events showing higher cloud tops than the sunrise events, indicating the seasonal and diurnal variation of the tropical convection. The seasonal altitude distribution of cloud occurrence frequency obtained from the SAGE III/ISS also agrees well with CALIOP observations within 10%. We show that the ECR method is a simple approach that relies on thresholds independent of the sampling period, providing cloud-filtered aerosol extinction coefficients uniformly for climate studies irrespective of the UTLS conditions. However, since the predecessor of SAGE III did not include a 1550 nm channel, the usefulness of this approach is limited to short-term climate studies after 2017.

Clouds Aerosols↗