Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALCULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Calculation of the potential for interaction of particles with complex atomic structures

We present a method for calculation of the potential and related physical quantities experienced by a particle traversing an aligned periodic complex atomic structure. Classical physics equations and the expansion of periodic functions as a Fourier series have been used for the calculation. Based on this method, we have developed the ECHARM program, which calculates one- and two-dimensional averaged physical quantities of interest along the main axes of any orthorhombic and tetragonal structure. For the case of cubic symmetry, the calculation holds for any orientation. Complex structures such as zeolites have been worked out to show the capability of the program.

36 MATERIALS SCIENCE↗

Photoluminescence spectra of point defects in semiconductors: Validation of first-principles calculations

Optically and magnetically active point defects in semiconductors are interesting platforms for the development of solid state quantum technologies. Their optical properties are usually probed by measuring photoluminescence spectra, which provide information on excitation energies and on the interaction of electrons with lattice vibrations. We present a combined computational and experimental study of photoluminescence spectra of defects in diamond and SiC, aimed at assessing the validity of theoretical and numerical approximations used in first-principles calculations, including the use of the Franck-Condon principle and the displaced harmonic oscillator approximation. We focus on prototypical examples of solid state qubits, the divacancy centers in SiC and the nitrogen-vacancy in diamond, and we report computed photoluminescence spectra as a function of temperature that are in very good agreement with the measured ones. As expected we find that the use of hybrid functionals leads to more accurate results than semilocal functionals. Interestingly our calculations show that constrained density functional theory (CDFT) and time-dependent hybrid DFT perform equally well in describing the excited state potential energy surface of triplet states; our findings indicate that CDFT, a relatively cheap computational approach, is sufficiently accurate for the calculations of photoluminescence spectra of the defects studied here. Finally, we find that only by correcting for finite-size effects and extrapolating to the dilute limit can one obtain a good agreement between theory and experiment. Our results provide a detailed validation protocol of first-principles calculations of photoluminescence spectra, necessary both for the interpretation of experiments and for robust predictions of the electronic properties of point defects in semiconductors.

36 MATERIALS SCIENCE↗

A convolution-superposition dose calculation engine for GPUs

Purpose: Graphic processing units (GPUs) are increasingly used for scientific applications, where their parallel architecture and unprecedented computing power density can be exploited to accelerate calculations. In this paper, a new GPU implementation of a convolution/superposition (CS) algorithm is presented. Methods: This new GPU implementation has been designed from the ground-up to use the graphics card's strengths and to avoid its weaknesses. The CS GPU algorithm takes into account beam hardening, off-axis softening, kernel tilting, and relies heavily on raytracing through patient imaging data. Implementation details are reported as well as a multi-GPU solution. Results: An overall single-GPU acceleration factor of 908x was achieved when compared to a nonoptimized version of the CS algorithm implemented in PlanUNC in single threaded central processing unit (CPU) mode, resulting in approximatively 2.8 s per beam for a 3D dose computation on a 0.4 cm grid. A comparison to an established commercial system leads to an acceleration factor of approximately 29x or 0.58 versus 16.6 s per beam in single threaded mode. An acceleration factor of 46x has been obtained for the total energy released per mass (TERMA) calculation and a 943x acceleration factor for the CS calculation compared to PlanUNC. Dose distributions also have been obtained for a simple water-lung phantom to verify that the implementation gives accurate results. Conclusions: These results suggest that GPUs are an attractive solution for radiation therapy applications and that careful design, taking the GPU architecture into account, is critical in obtaining significant acceleration factors. These results potentially can have a significant impact on complex dose delivery techniques requiring intensive dose calculations such as intensity-modulated radiation therapy (IMRT) and arc therapy. They also are relevant for adaptive radiation therapy where dose results must be obtained rapidly.

61 RADIATION PROTECTION AND DOSIMETRY↗

SU-E-T-59: Calculations of Collimator Scatter Factors (Sc) with and Without Custom-Made Build-Up Caps for CyberKnife

Purpose: To investigate the impact of custom-made build-up caps for a diode detector in robotic radiosurgery radiation fields with variable collimator (IRIS) for collimator scatter factor (Sc) calculation. Methods: An acrylic cap was custom-made to fit our SFD (IBA Dosimetry, Germany) diode detector. The cap has thickness of 5 cm, corresponding to a depth beyond electron contamination. IAEA phase space data was used for beam modeling and DOSRZnrc code was used to model the detector. The detector was positioned at 80 cm source-to-detector distance. Calculations were performed with the SFD, with and without the build-up cap, for clinical IRIS settings ranging from 7.5 to 60 mm. Results: The collimator scatter factors were calculated with and without 5 cm build-up cap. They were agreed within 3% difference except 15 mm cone. The Sc factor for 15 mm cone without buildup was 13.2% lower than that with buildup. Conclusion: Sc data is a critical component in advanced algorithms for treatment planning in order to calculate the dose accurately. After incorporating build-up cap, we discovered differences of up to 13.2 % in Sc factors in the SFD detector, when compared against in-air measurements without build-up caps.

07 ISOTOPE AND RADIATION SOURCES↗

On the Choice of a Distributed Basis Set in Calculations of Transition-Dipole Moments in the One-Determinant Approximation

The so-called “asymptotic projection technique” developed in previous papers of the authors is applied to the calculation of electronic transition-dipole moments (TDMs) in the one-determinant approximation between states of the same spin and spatial symmetry. The basic equations of the method and specific features of their application to a TDM calculation are briefly discussed. The attention focusses on the choice of a finite one-particle basis set. For this purpose, two possible algorithms for constructing distributed basis sets are proposed. In the first of them, the construction is based on minimization of the Hartree–Fock energy (E{sub HF}) with respect to nonlinear basis set parameters. In the second case, the parameters are determined by minimizing the functional E = E{sub HF} + E{sub MP2}, which includes the electron correlation through the second order of Møller–Plesset perturbation theory (Е{sub МР2}). On the whole, the results of calculations in both basis sets are in agreement with high-accuracy calculations performed by configuration interaction methods. The basis set adapted for E = E{sub HF} + E{sub MP2} significantly improves the accuracy as compared to the basis set of the first type.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Calculation of binodals and spinodals in multicomponent alloys by different statistical methods with application to iron-copper-manganese alloys

A generalization of the pair-cluster (PC) approximation in the theory of disordered systems to multicomponent alloys is proposed. It is shown that phase equilibrium boundaries (binodals) calculated in the mean-field (MF) approximation, which is used in standard calculations of phase diagrams by the CALPHAD method, coincide with the results of rigorous calculations for dilute alloys; however, the application of these methods to calculating the boundaries of the stability region with respect to the decomposition of an alloy (spinodals) leads to large errors. At the same time, in the PC approximation, the description of all statistical properties, including binodals and spinodals, turns out to be exact for dilute alloys. The methods developed are illustrated by an example of iron-copper-manganese ternary alloys.

36 MATERIALS SCIENCE↗

Calculation of the field and current density distributions in a non-self-sustained discharge in the discharge chamber of a CO laser

Two-dimensional spatial distributions of the electric field and current density in a non-self-sustained discharge controlled by a fast electron beam were calculated in the quasineutral plasma approximation. The calculations were carried out for a gas-discharge chamber with an antistreamer electrode grid placed in parallel to the output window of the ionizer. The voltage drop near the grid surface that appears due to the inhomogeneity of the spatial distribution of the current density was calculated. The fraction of the discharge current that passes the grid and flows onto the foil separating the vacuum volume of the ionizer from the gas-discharge chamber was estimated. The dependence of the calculated values on the geometric parameters of the electrode grid and its position with respect to the output of the ionizer was analyzed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Calculation of Multiply Charged States of Impurity-Defect Centers in Epitaxial Hg{sub 1–x}Cd{sub x}Te Layers

A method for calculating the states of multivalent donors and acceptors in Hg{sub 1–x}Cd{sub x}Te materials is developed. The ionization energies of deep acceptor and donor centers in epitaxial Hg{sub 1–x}Cd{sub x}Te films are calculated. The calculation method takes into account the influence of both the valence band and the conduction band on the states of impurity-defect centers. The calculations of energies for the levels of tetravalent acceptors and donors associated with crystalline structure defects indicate the intercenter nature of lines observed previously in the photoluminescence spectra of Hg{sub 1–x}Cd{sub x}Te films.

36 MATERIALS SCIENCE↗

Recent progress on the APOLLO3 calculation scheme for the FLUOLE2 experiment

Studies of the neutron fluence on reactor pressure vessel and the correlated reactor lifetime issues require very good knowledge of the neutron source distribution in the reactor core and especially in the peripheral region. The FLUOLE2 experiment offers an appropriate starting configuration to investigate the possibility of using the APOLLO3 deterministic code with a two-step calculation scheme. It enables us to calculate a pin-by-pin neutron source distribution in the core, then to carry out the neutron propagation from the core to neutron detectors. In this paper, we focus on a calculation scheme dedicated to the determination of core neutron source distribution using APOLLO3 with the SHEM281 energy mesh, a Method of Characteristics (MOC) to solve the transport equation for the lattice computation step and a 20-groups 3D computation using the MINARET SN solver of APOLLO3. Reactivity and pin-by-pin reaction rate results have been analyzed. Results obtained with both lattice and core computations show a good agreement with those produced through a reference calculation using the TRIPOLI-4 Monte Carlo transport code. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Universal calculation formula and calibration method in Fourier transform profilometry

We propose a universal calculation formula of Fourier transform profilometry and give a strict theoretical analysis about the phase-height mapping relation. As the request on the experimental setup of the universal calculation formula is unconfined, the projector and the camera can be located arbitrarily to get better fringe information, which makes the operation flexible. The phase-height calibration method under the universal condition is proposed, which can avoid measuring the system parameters directly. It makes the system easy to manipulate and improves the measurement velocity. A computer simulation and experiment are conducted to verify its validity. The calculation formula and calibration method have been applied to measure an object of 22.00 mm maximal height. The relative error of the measurement result is only 0.59%. The experimental results prove that the three-dimensional shape of tested objects can be reconstructed exactly by using the calculation formula and calibration method, and the system has better universality.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Carbon Calculator for Land Use Change from Biofuels Production (CCLUB). Users' Manual and Technical Documentation

The Carbon Calculator for Land Use Change from Biofuels Production (CCLUB) calculates carbon emissions from land use change (LUC) for four different ethanol production pathways including corn grain ethanol and cellulosic ethanol from corn stover, miscanthus, and switchgrass. This document discusses the version of CCLUB released May 31, 2012 which includes corn, as did the previous CCLUB version, and three cellulosic feedstocks: corn stover, miscanthus, and switchgrass. CCLUB calculations are based upon two data sets: land change areas and above- and below-ground carbon content. Table 1 identifies where these data are stored and used within the CCLUB model, which is built in MS Excel. Land change area data is from Purdue University's Global Trade Analysis Project (GTAP) model, a computable general equilibrium (CGE) economic model. Section 2 describes the GTAP data CCLUB uses and how these data were modified to reflect shrubland transitions. Feedstock- and spatially-explicit below-ground carbon content data for the United States were generated with a surrogate model for CENTURY's soil organic carbon sub-model (Kwon and Hudson 2010) as described in Section 3. CENTURY is a soil organic matter model developed by Parton et al. (1987). The previous CCLUB version used more coarse domestic carbon emission factors. Above-ground non-soil carbon content data for forest ecosystems was sourced from the USDA/NCIAS Carbon Online Estimator (COLE) as explained in Section 4. We discuss emission factors used for calculation of international greenhouse gas (GHG) emissions in Section 5. Temporal issues associated with modeling LUC emissions are the topic of Section 6. Finally, in Section 7 we provide a step-by-step guide to using CCLUB and obtaining results.

09 BIOMASS FUELS↗

Neutron Damage Calculator [Poster]

The Nuclear Science Users Facilities (NSUF) currently has several experimental reactors participating in the program. These reactors allow users to complete material irradiation and studies of the effects of radiation on those materials. Completing the experiments is a long and costly process, beginning with applying for NSUF funding and support to placing materials in the reactor to post- irradiation examination . The goal of this project is to build a tool that NSUF users can use during the conceptual design phase of their experiment to select a reactor and reactor position which is the most fitting for their needed level of neutron damage. The tool has three main functions: 1) calculate displacements per atom (DPA) for multiple different materials, 2) calculate the time needed to reach the desired DPA, and 3) inform users what position in what reactor will give them the desired radiation damage the most effectively. This work is at the stage of finding displacement cross sections needed to calculate DPA. Future work will include finishing DPA calculations and modifying the current code to be used with other NSUF research reactors.

36 MATERIALS SCIENCE↗

The Role of Proton Transport in Gating Current in a Voltage Gated Ion Channel, as Shown by Quantum Calculations

Over two-thirds of a century ago, Hodgkin and Huxley proposed the existence of voltage gated ion channels (VGICs) to carry Na + and K + ions across the cell membrane to create the nerve impulse, in response to depolarization of the membrane. The channels have multiple physiological roles, and play a central role in a wide variety of diseases when they malfunction. The first channel structure was found by MacKinnon and coworkers in 1998. Subsequently, the structure of a number of VGICs was determined in the open (ion conducting) state. This type of channel consists of four voltage sensing domains (VSDs), each formed from four transmembrane (TM) segments, plus a pore domain through which ions move. Understanding the gating mechanism (how the channel opens and closes) requires structures. One TM segment (S4) has an arginine in every third position, with one such segment per domain. It is usually assumed that these arginines are all ionized, and in the resting state are held toward the intracellular side of the membrane by voltage across the membrane. They are assumed to move outward (extracellular direction) when released by depolarization of this voltage, producing a capacitive gating current and opening the channel. We suggest alternate interpretations of the evidence that led to these models. Measured gating current is the total charge displacement of all atoms in the VSD; we propose that the prime, but not sole, contributor is proton motion, not displacement of the charges on the arginines of S4. It is known that the VSD can conduct protons. Quantum calculations on the K v 1.2 potassium channel VSD show how; the key is the amphoteric nature of the arginine side chain, which allows it to transfer a proton. This appears to be the first time the arginine side chain has had its amphoteric character considered. We have calculated one such proton transfer in detail: this proton starts from a tyrosine that can ionize, transferring to the NE of the third arginine on S4; that arginine’s NH then transfers a proton to a glutamate. The backbone remains static. A mutation predicted to affect the proton transfer has been qualitatively confirmed experimentally, from the change in the gating current-voltage curve. The total charge displacement in going from a normal closed potential of -70 mV across the membrane to 0 mV (open), is calculated to be approximately consistent with measured values, although the error limits on the calculation require caution in interpretation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A collision history-based approach to Sensitivity/Perturbation calculations in the continuous energy Monte Carlo code SERPENT

In this work, the implementation of a collision history-based approach to sensitivity/perturbation calculations in the Monte Carlo code SERPENT is discussed. The proposed methods allow the calculation of the eects of nuclear data perturbation on several response functions: the eective multiplication factor, reaction rate ratios and bilinear ratios (e.g., eective kinetics parameters). SERPENT results are compared to ERANOS and TSUNAMI Generalized Perturbation Theory calculations for two fast metallic systems and for a PWR pin-cell benchmark. New methods for the calculation of sensitivities to angular scattering distributions are also presented, which adopts fully continuous (in energy and angle) Monte Carlo estimators.

97 MATHEMATICS AND COMPUTING↗

Updates to the Instant Online PV LCOE Calculator Tool

Levelized cost of energy (LCOE) is an important metric for techno-economic analysis of PV modules, systems, and performance. An NREL team within DuraMAT has developed a simplified PV-specific LCOE calculator as an alternative to the NREL System Advisor Model (SAM) for applications that do not have the degree of detail required by SAM. This webinar will review recent data and new features that have been added to the simplified calculator this year, including breakeven buttons, commercial system options, and inverter loading ratios. It will also review the structure of the source code on GitHub, how to edit a local version of the calculator, and walk through some example use cases for the calculator.

calculator↗

Hand Calculations for Nuclear Criticality Safety – Primer Revision

The document “ Hand Calculation Methods for Criticality Safety – A Primer, ” was published by the authors (Los Alamos National Laboratory report LA-14244-M) in December 2006 to provide an overview of the most common hand calculation methods used for criticality safety analysis. Hand calculation methods can be used as a starting point for more advanced calculations, and in many circumstances, they can provide sensitivity and perturbation information quicker than using a criticality code, such as KENO or MCNP. This report has been revised to augment existing basis information and example problems for each of the methods discussed: 1-group and modified 1- group diffusion theory, core-density conversions, buckling conversions, limiting surface density method, density analog method, surface density method, and solid angle method. This primer discusses the applicability of the various methods, illustrates how they are used, and provides an interpretation of the example problem results. The example problems provided are simple, practical problems, and the reference data to solve each example problem is provided. This paper will provide an overview of the Primer revision and how it can be useful for new Nuclear Criticality Safety practitioners.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Hand Calculations for Nuclear Criticality Safety — Primer Revision [Abstract]

The document “ Hand Calculation Methods for Criticality Safety –A Primer, ” was published by the authors (Los Alamos National Laboratory report LA-14244-M) in December 2006 to provide an overview of the most common hand calculation methods used for criticality safety analysis. Hand calculation methods can be used as a starting point for more advanced calculations, and in many circumstances, they can provide sensitivity and perturbation information quicker than using a criticality code, such as KENO or MCNP. This report has been revised to augment existing basis information and example problems for each of the methods discussed: 1-group and modified 1-group diffusion theory, core-density conversions, buckling conversions, limiting surface density method, density analog method, surface density method, and solid angle method. This primer discusses the applicability of the various methods, illustrates how they are used, and provides an interpretation of the example problem results. The example problems provided are simple, practical problems, and the reference data to solve each example problem is provided. This paper will provide an overview of the Primer revision and how it can be useful for new Nuclear Criticality Safety practitioners.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

An improved energy-collapsing method for core-reflector modelization in SFR core calculations using the PARIS platform

In the framework of the ASTRID project, sodium cooled fast reactor studies are conducted at CEA in compliance with GEN IV reactors criteria, particularly for safety requirements. An improved safety requires better calculation tools to obtain accurate reactivity effects (especially sodium void effect) and power map distributions. The current calculation route lies on the JEFF3.1.1 library and the classical two-step approach performed with the ECCO module of the ERANOS code system at the assembly level and the Sn SNATCH solver - implemented within the PARIS platform - at the core level. 33-group cross sections used by SNATCH are collapsed from 1968-group self-shielded cross-section with a specific flux-current weighting. Recent studies have shown that this collapsing is non-conservative when dealing with core-reflector interface and can lead to reactivity discrepancies larger than 500 pcm in the case of a steel reflector. Such a discrepancy is due to the flux anisotropy at the interface, which is not taken into account when cross sections are obtained from separate fuel and reflector assembly calculations. A new approach is proposed in this paper. It consists in separating the self-shielding and the flux calculations. The first one is still performed with ECCO on separate patterns. The second one is done with SNATCH on a 1D traverse, representative of the core-reflector interface. An improved collapsing method using angular flux moments is then carried out to collapse the cross sections onto the 33-group structure. In the case of a simplified ZONA2B 2D homogeneous benchmark, results in terms of k{sub eff} and power map are strongly improved for a small increase of the computing time. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗