Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Automatic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Failure detection by pilots during automatic landing: Models and experiments

A model of the pilot as a monitor of instrument failures during automatic landing is proposed. The failure detection model consists of two stages: a linear estimator (Kalman Filter) and a decision mechanism which is based on sequential analysis. The filter equations are derived from a simplified version of the linearized dynamics of the airplane and the control loop. The perceptual observation noise is modelled to include the effects of the partition of attention among the several instruments. The final result is a simple model consisting of a high pass filter to produce the observation residuals, and a decision function which is a pure integration of the residuals minus a bias term. The dynamics of a Boeing 707 were used to simulate the fully coupled final approach in a fixed base simulator which also included failures in the airspeed, glideslope, and localizer indicators. Subjects monitored the approaches and detected the failures; their performance was compared with the predictions of the model with good agreement between the experimental data and the model.

Gai, E. G.↗

Manual and automatic control of surface effect ships

A recent investigation of crew performance in the motion environment of a large generic high speed surface effect ship by means of a motion base simulation addressed some of the helmsman's control task with an external forward visual field of the seascape and navigation and steering displays in the pilot house. In addition to the primary steering control task, a subcritical speed tracking task provided a secondary surrogate for trimming the water speed of the craft. The results of helsmen's steering describing function measurements are presented, and some suggestions for their interpretation are offered. The likely steering loop closures comprise heading and lateral displacement for the course keeping task investigated. Also discussed is the manner in which these loop closures were implemented for automatic steering of the surface effect ship. Regardless of the influence of workload, steering technique, water speed and sea state, the helmsmen apparently adopted a disturbance regulation bandwidth of about 0.2 rad/sec for lateral displacement.

Clement, W. F.↗

Automatic land use classification using Skylab S-192 multispectral data

Investigation of the accuracy attainable in automatic land use classification using 13 bands of multispectral data from the Skylab S-192 scanner. Classification to levels containing seven urban classes, five agricultural, and three water classes is shown to be achievable. With 17 classes, a classification accuracy of 72% was obtained. A wide spectral range, including the thermal band, appears to be most useful for distinguishing urban classes. Agricultural and water classes can be separated using spectral bands covering the visible to far IR.

Kirvida, L.↗

The effect of atmospheric water vapor on automatic classification of ERTS data

Absorption by atmospheric water vapor changes the spectral signatures collected by multispectral scanners if channels are not chosen to avoid the atmospheric water bands. For ERTS (Earth Resources Technology Satellite), the Multispectral Scanner band 7 (MSS 7, .8 to 1.1 micron) is the only band significantly affected. Line-by-line atmospheric absorption calculations showed that this effect can multiply the intensity by factors ranging from .77 to 1.0. If horizontal gradients in atmospheric water exist between training fields and the rest of the scene, errors are introduced in automatic classification of the imagery. The degradation of the classification of corn and soybeans was determined by using actual ERTS data and simulating the absorption effects on the MSS 7 band.

Pitts, D. E.↗

Effect of atmospheric haze and sun angle on automatic classification of ERTS-1 data

The effect of variations in sun angle and haze level on the accuracy of automatic classification of Earth Resources Technology Satellite-1 (ERTS-1) data was studied by classifying ERTS imagery in which such variations were computer-simulated. It was found that relatively small changes in sun angle and haze level can substantially reduce classification accuracy.

Potter, J.↗

Decision-directed automatic gain control for MAPSK systems

An automatic gain control (AGC) loop is presented for use with M-ary amplitude and phase shift keying (MAPSK) systems. The gain control amplifier is regulated by an error signal formed by the difference between the estimated amplitude level and the received amplitude level. The AGC performance is thus independent of the short-term average received signal energy. AGC loop analysis and simulation is presented for M-ary amplitude shift keying and quadrature amplitude shift keying. The AGC is shown to have a negligible degradation on the symbol probability of error for most practical cases. A generalized AGC for an arbitrary MAPSK system is presented.

Weber, W. J., III↗

Automatic control of a primary electric thrust subsystem

A concept for automatic control of the thrust subsystem has been developed by JPL and participating NASA Centers. This paper reports on progress in implementing the concept at JPL. Control of the Thrust Subsystem (TSS) is performed by the spacecraft computer command subsystem, and telemetry data is extracted by the spacecraft flight data subsystem. The Data and Control Interface Unit, an element of the TSS, provides the interface with the individual elements of the TSS. The control philosophy and implementation guidelines are presented. Control requirements are listed, and the control mechanism, including the serial digital data intercommunication system, is outlined. The paper summarizes progress to Fall 1974.

Macie, T. W.↗

Automatic Navaids Checkout System

An automatic Navaids Checkout System for use in Space Shuttle development is discussed. The groundwork leading to the development is presented, followed by a description of the hardware. Finally, system utilization including operator interface and system software is discussed. The Navaids Checkout System is extremely flexible with capability to handle different test articles with a minimum of hardware reconfiguration. Application software is written in a high level user-oriented test language. The checkout system has been in operation for approximately one year with capability to handle VOR, ILS, TACAN, ATC Radar Beacon, and UHF/VHF communications equipment.

Belver, T. L.↗

Wind modeling and lateral control for automatic landing

For the purposes of aircraft control system design and analysis, the wind can be characterized by a mean component which varies with height and by turbulent components which are described by the von Karman correlation model. The aircraft aero-dynamic forces and moments depend linearly on uniform and gradient gust components obtained by averaging over the aircraft's length and span. The correlations of the averaged components are then approximated by the outputs of linear shaping filters forced by white noise. The resulting model of the crosswind shear and turbulence effects is used in the design of a lateral control system for the automatic landing of a DC-8 aircraft.

Holley, W. E.↗

Total reduction of distorted echelle spectrograms - An automatic procedure

A total reduction procedure, notable for its use of a computer-controlled microdensitometer for semi-automatically tracing curved spectra, is applied to distorted high-dispersion echelle spectra recorded by an image tube. Microdensitometer specifications are presented and the FORTRAN, TRACEN and SPOTS programs are outlined. The intensity spectrum of the photographic or electrographic plate is plotted on a graphic display. The time requirements are discussed in detail.

Peterson, R. C.↗

Automatic multiple applicator electrophoresis

Easy-to-use, economical device permits electrophoresis on all known supporting media. System includes automatic multiple-sample applicator, sample holder, and electrophoresis apparatus. System has potential applicability to fields of taxonomy, immunology, and genetics. Apparatus is also used for electrofocusing.

Grunbaum, B. W.↗

Development of a high-resolution automatic digital (urine/electrolytes) flow volume and rate measurement system of miniature size

To aid in the quantitative analysis of man's physiological rhythms, a flowmeter to measure circadian patterns of electrolyte excretion during various environmental stresses was developed. One initial flowmeter was designed and fabricated, the sensor of which is the approximate size of a wristwatch. The detector section includes a special type of dielectric integrating type sensor which automatically controls, activates, and deactivates the flow sensor data output by determining the presence or absence of fluid flow in the system, including operation under zero-G conditions. The detector also provides qualitative data on the composition of the fluid. A compact electronic system was developed to indicate flow rate as well as total volume per release or the cumulative volume of several releases in digital/analog forms suitable for readout or telemetry. A suitable data readout instrument is also provided. Calibration and statistical analyses of the performance functions required of the flowmeter were also conducted.

Liu, F. F.↗

An interactive graphics package for the automatic node renumbering of finite element matrices

An interactive graphics software package which allows users to display the non-zero structure of large sparse symmetric materials was described and methods used to implement it as a portable FORTRAN callable subroutine were summarized. In particular, the system permits the display of the resulting matrix after reordering the rows and columns, with the reordering scheme either defined by the user or automatically generated by the program with the aim of reducing matrix bandwidth and profile. Although the primary application of the package has been to the finite element analysis of structures, it is equally well suited to the many other areas of engineering and science which use sparse matrices.

Boisvert, R. F.↗

Creating a system for the geological exploitation of satellite images: Automatic mapping and geophysical data comparison

A method is presented for integrating satellite images into a geophysical data interpretation system. Aspects of the method include: an attempt to automatically interpret images by structural, mainly topological, methods for the mapping of geological contours; an analysis of the position relation of the contours gives a skeleton stratigraphy (order of succession); and a system combining some of the extracted elements with geographic data to make an objective search for an interpretation hypothesis. Some examples are presented.

Braconne, S.↗

Advances in automatic extraction of earth resources information from multispectral scanner data

The basis of spectral discrimination was briefly examined indicating sources of variability which tend to obscure the spectral attributes of the classes of interest. Spatial and temporal discrimination bases are also discussed. Automatic processing functions, techniques and methods, and equipment are discussed with emphasis on techniques and equipment required for operational large area surveys with satellite data. Techniques for carrying out major functions of preprocessing for signature extension, feature extraction, discrimination, display, and applications modeling were examined. A multiplicative and additive signature correction technique and a proportion estimation technique are discussed. The development of the multivariate interactive digital analysis system multispectral processor system which represents a breakthrough in cost effective high throughput processing for large area surveys from satellites and aircraft is reviewed. Applications and results are discussed briefly for agricultural crop inventories, environmental monitoring, and resources surveys from ERIM LANDSAT and EREP investigations to indicate the substantial progress achieved to date.

Erickson, J. D.↗

An examination of the potential applications of automatic classification techniques to Georgia management problems

Automatic classification techniques are described in relation to future information and natural resource planning systems with emphasis on application to Georgia resource management problems. The concept, design, and purpose of Georgia's statewide Resource AS Assessment Program is reviewed along with participation in a workshop at the Earth Resources Laboratory. Potential areas of application discussed include: agriculture, forestry, water resources, environmental planning, and geology.

Rado, B. Q.↗

A method for studying the hunting oscillations of an airplane with a simple type of automatic control

A method is presented for predicting the amplitude and frequency, under certain simplifying conditions, of the hunting oscillations of an automatically controlled aircraft with lag in the control system or in the response of the aircraft to the controls. If the steering device is actuated by a simple right-left type of signal, the series of alternating fixed amplitude signals occuring during the hunting may ordinarily be represented by a square wave. Formulas are given expressing the response to such a variation of signal in terms of the response to a unit signal.

Jones, R. T.↗

Automatic noise limiter-blanker

A blanker system that may be used with audio noise limiters or automatic noise limiters was described. The system employs a pair of silicon diodes and two RC filters connected across the feedback impedance of an operational amplifier so as to counteract impulse noise interference caused by local spherics activity or 60 Hz harmonics radiated from ac motor control systems. The following information is given: circuit diagram and description, operating details, evaluation, discussion of other noise blanking methods.

Burhans, R. W.↗