SEARCH · Engineering Papers

Results for “Ar”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

All sources NASA NTRS DOE OSTI

NASA NTRS2016

Collisional Dissociation of CO: ab initio Potential Energy Surfaces and Quasiclassical Trajectory Rate Coefficients

We have generated accurate global potential energy surfaces for CO+Ar and CO+O that correlate with atom-diatom pairs in their ground electronic states based on extensive ab initio electronic structure calculations and used these potentials in quasi-classical trajectory nuclear dynamics calculations to predict the thermal dissociation rate coefficients over 5000- 35000 K. Our results are not compatible with the 20-45 year old experimental results. For CO + Ar we obtain fairly good agreement with the experimental rate coefficients of Appleton et al. (1970) and Mick and Roth (1993), but our computed rate coefficients exhibit a stronger temperature dependence. For CO + O our dissociation rate coefficient is in close agreement with the value from the Park model, which is an empirical adjustment of older experimental results. However, we find the rate coefficient for CO + O is only 1.5 to 3.3 times larger than CO + Ar over the temperature range of the shock tube experiments (8000-15,000 K). The previously accepted value for this rate coefficient ratio is 15, independent of temperature. We also computed the rate coefficient for the CO + O ex- change reaction which forms C + O2. We find this reaction is much faster than previously believed and is the dominant process in the removal of CO at temperatures up to 16,000 K. As a result, the dissociation of CO is accomplished in two steps (react to form C+O2 and then O2 dissociates) that are endothermic by 6.1 and 5.1 eV, instead of one step that requires 11.2 eV to break the CO bond.

exchange rate coefficient↗

NASA NTRS2016

The Potassium-Argon Laser Experiment (karle): In Situ Geochronology for Planetary Missions

Isotopic dating is an essential tool to establish an absolute chronology for geological events. It enables a planet's crystallization history, magmatic evolution, and alteration to be placed into the framework of solar system history. The capability for in situ geochronology will open up the ability for this crucial measurement to be accomplished as part of lander or rover complement. An in situ geochronology package can also complement sample return missions by identifying the most interesting rocks to cache or return to Earth. Appropriate application of in situ dating will enable geochronology on more terrains than can be reached with sample-return missions to the Moon, Mars, asteroids, outer planetary satellites, and other bodies that contain rocky components. The capability of flight instruments to conduct in situ geochronology is called out in the NASA Planetary Science Decadal Survey and the NASA Technology Roadmap as needing development to serve the community's needs. Beagle 2 is the only mission launched to date with the explicit aim to perform in situ K-Ar isotopic dating [1], but it failed to communicate and was lost. The first in situ K-Ar date on Mars, using SAM and APXS measurements on the Cumberland mudstone [2], yielded an age of 4.21 +/- 0.35 Ga and validated the idea of K-Ar dating on other planets, though the Curiosity method is not purpose-built for dating and requires many assumptions that degrade its precision. To get more precise and meaningful ages, multiple groups are developing dedicated in situ dating instruments.

planetary↗

NASA NTRS2016

Photospheric Current Spikes as Possible Predictors of Flares

Flares involve generation of the largest current densities in the solar atmosphere. This suggests the hypothesis that prior to a large (M,X) flare there are related time dependent changes in the photospheric current distribution, and hence in the resistive heating rate in neutral line regions (NLRs). If this is true, these changes might be useful predictors of flares. Preliminary evidence supporting this hypothesis is presented. Results from a data driven, near photospheric, 3D magnetohydrodynamic type model suggest the model might be useful for predicting M and X flares several hours to several days in advance. The model takes as input the photospheric magnetic field observed by the Helioseismic and Magnetic Imager (HMI) on the Solar Dynamics Observatory (SDO) satellite. The model computes quantities in every active region (AR) pixel for 14 ARs, with spurious Doppler periods due to SDO orbital motion filtered out of the time series of the magnetic field for each pixel. Spikes in the NLR resistive heating rate Q, appearing as increases by orders of magnitude above background values in the time series of Q are found to occur, and appear to be correlated with the occurrence of M or X flares a few hours to a few days later. The subset of spikes analyzed at the pixel level are found to occur on HMI and granulation scales of 1 arcsec and 12 minutes. Spikes are found in NLRs with and without M or X flares, and outside as well as inside NLRs, but the largest spikes are localized in the NLRs of ARs with M or X flares, and associated with horizontal magnetic field strengths approximately several hG, and vertical magnetic field strengths several orders of magnitude smaller. The spikes may be signatures of horizontal current sheets associated with emerging magnetic flux.

Goodman, Michael L.↗

NASA NTRS2017

Clast Selection and Metallographic Cooling Rates: Initial Results on Type 1A and 2A Mesosiderites

We initiated a comprehensive study on selected clasts and metal of mesosiderites using SEM, electron microprobe and the complete suite of noble gases. Here we report initial results on the petrography of selected clasts and metallographic cooling rates using the central Ni method used in sev-eral publications. We focus on the approach of selecting grains in least recrystallized mesosiderites. Hence, especially (lithic) clasts in type 1A, 1B, 2A and 2B are the first choice. They provide highest primitive-ness and least annealing/metamorphism. All grains selected should be in close proximity to each other. Lithic clasts in mesosiderites are of high interest be-cause of their igneous texture and similarity to eucrites and howardite petrography. We find pyrox-enes (px) and plagioclase (plag) attached to each other which implies a common formation history. It will be interesting to see differences and similarities in their noble gas inventory (CRE ages, trapped components and closure temperature). In addition, we will investi-gate variations of the lithic clasts toward similar grains in the thick sections which are not igneous. Plag grains are the best bases for noble gas measurements con-cerning He to Ar and Ar-Ar dating since it delivers im-portant target elements. We focus on plag grains in close contact to olivine (olv) / px grains to assess weth-er both grains show noble gas patterns being similar or different. Phosphate grains are suitable for Kr and Xe measurements since they yield REE abundances (tar-get elements).

Mesosiderites↗

NASA NTRS2017

The Potassium-Argon Laser Experiment (KArLE): Design Concepts

The absolute ages of geologic events are fundamental information for understanding the timing and duration of surface processes on planetary bodies. Absolute ages can place a planet's history in the context of the solar system evolution. For example, "when was Mars warm and wet?" is one of the key questions of planetary science. If Mars was warm and wet until 3.7 billion years ago, for instance, it suggests that Mars was still warm and wet when life appeared on Earth. Mars history has been discussed so far based on crater chronology, but the current constraints for Martian chronology models come from the cratering history of the Moon [1]. Moreover, the lunar chronology model itself is fraught with uncertainty because our understanding of lunar chronology is constrained only in a few time periods and itself needs further investigation relating crater-counting ages to absolute ages [2]. Although sample return missions would provide highly accurate radiometric ages of returned samples, they are very expensive and technically challenging. In situ geochronology is highly valuable because they would have larger number of mission opportunities and the capability of iterative measurements for multiple rocks from multiple geologic units. The capability of flight instruments to perform in situ dating is required in the NASA Planetary Science Decadal Survey and the NASA Technology Roadmap. Beagle 2 is the only mission launched to date with the explicit aim to perform in situ potassium-argon (K-Ar) dating [3], but it did not happen because of the communication failure to the spacecraft. The first in situ K-Ar dating on Mars, using SAM and APXS measurements on the Cumberland mudstone [4], yielded an age of 4.21 +/- 0.35 Ga and validated the idea of K-Ar dating on other planets. However, the Curiosity method is not purposebuilt for dating and requires many assumptions that degrade its accuracy. To obtain more accurate and meaningful ages, multiple groups are developing dedicated in situ dating instruments [5-8].

design↗

NASA NTRS2017

The NASA Augmented/Virtual Reality Lab: The State of the Art at KSC

The NASA Augmented Virtual Reality (AVR) Lab at Kennedy Space Center is dedicated to the investigation of Augmented Reality (AR) and Virtual Reality (VR) technologies, with the goal of determining potential uses of these technologies as human-computer interaction (HCI) devices in an aerospace engineering context. Begun in 2012, the AVR Lab has concentrated on commercially available AR and VR devices that are gaining in popularity and use in a number of fields such as gaming, training, and telepresence. We are working with such devices as the Microsoft Kinect, the Oculus Rift, the Leap Motion, the HTC Vive, motion capture systems, and the Microsoft Hololens. The focus of our work has been on human interaction with the virtual environment, which in turn acts as a communications bridge to remote physical devices and environments which the operator cannot or should not control or experience directly. Particularly in reference to dealing with spacecraft and the oftentimes hazardous environments they inhabit, it is our hope that AR and VR technologies can be utilized to increase human safety and mission success by physically removing humans from those hazardous environments while virtually putting them right in the middle of those environments.

Little, William↗

NASA NTRS2018

Dressing the Coronal Magnetic Extrapolations of Active Regions with a Parameterized Thermal Structure

The study of time-dependent solar active region (AR) morphology and its relation to eruptive events requires analysis of imaging data obtained in multiple wavelength domains with differing spatial and time resolution, ideally in combination with 3D physical models. To facilitate this goal, we have undertaken a major enhancement of our IDL-based simulation tool, GX_Simulator, previously developed for modeling microwave and X-ray emission from flaring loops, to allow it to simulate quiescent emission from solar ARs. The framework includes new tools for building the atmospheric model and enhanced routines for calculating emission that include new wavelengths. In this paper, we use our upgraded tool to model and analyze an AR and compare the synthetic emission maps with observations. We conclude that the modeled magneto-thermal structure is a reasonably good approximation of the real one.

Nita, Gelu M.↗

NASA NTRS2020

Medics: Medical Decision Support System for Long-Duration Space Exploration

The Autonomous Medical Operations (AMO) group at NASA Ames is developing a “medical decision support system” to enable astronauts on long-duration exploration missions to operate autonomously. The system will support clinical actions by providing medical interpretation advice and procedural recommendations during emergent care and clinical work performed by crew. The current state of development of the system, called MedICS (Medical Interpretation Classification and Segmentation) includes two separate aspects: a set of machine learning diagnostic models trained to analyze organ images and patient health records, and an interface to ultrasound diagnostic hardware and to medical repositories. Three sets of images of different organs and medical records were utilized for training machine learning models for various analyses, as follows: 1. Pneumothorax condition (collapsed lung). The trained model provides a positive or negative diagnosis of the condition. 2. Carotid artery occlusion. The trained model produces a diagnosis of 5 different occlusion levels (including “normal”). 3. Ocular retinal images. The model extracts optic disc pixels (image segmentation). This is a precursor step for advanced autonomous fundus clinical evaluation algorithms to be implemented in FY20. 4. Medical health records. The model produces a differential diagnosis for any particular individual, based on symptoms and other health and demographic information. A probability is calculated for each of 25 most common conditions. The same model provides the likelihood of survival. All results are provided with a confidence level. Item 1 images were provided by the US Army and were part of a data set for the clinical treatment of injured battlefield soldiers. This condition is relevant to possible space mishaps, due to pressure management issues. Item 2 images were provided by Houston Methodist Hospital, and item 3 health records were acquired from the MIT laboratory of computational physiology. The machine learning technology utilized is deep multilayer networks (Deep Learning), and new models will continue to be produced, as relevant data is made available and specific health needs of astronaut crews are identified. The interfacing aspects of the system include a GUI for running the different models, and retrieving and storing data, as well as support for integration with an augmented reality (AR) system deployed at JSC by Tietronix Software Inc. (HoloLens). The AR system provides guidance for the placement of an ultrasound transducer that captures images to be sent to the MedICS system for diagnosis. The image captured and the associated diagnosis appear in the technician’s AR visual display.

Colombano, Silvano↗

NASA NTRS2020

Use of an Internal Mercury-Argon Lamp for the Calibration of Raman Frequency in Large Raman Images of Astromaterials

Raman imaging is an emerging tool for the analysis of meteorites, as it is capable of describing mineralogy, carbon composition/speciation, and crystal orientation all within a petrographic context. Adequately examining the heterogeneous composition of a meteorite, while maintaining low laser powers needed to prevent damage to meteorite mineralogy and organics, often requires the collection of large Raman images with long collection times on the timescale of days. However, the frequency calibration of the Raman instrument/spectrometer drifts on long timescales resulting in low frequency precision for the Raman spectra comprising a large Raman image. This decrease in frequency precision can compromise the analysis of geological markers that can provide important information on a meteorite sample. We examine, in detail, the change in bandwidth and frequency of the Raman bands and Hg-Ar emission lines in our Raman images as a function of time and laboratory temperature. To overcome the drift in calibration, we utilize a commercial WITec Raman instrument with an internal Hg-Ar calibration lamp to individually calibrate each spectrum in the Raman image. Our instrument, known as “Ratatoskr”, uses a beam splitter in place of the customary mirror to facilitate collection of Hg-Ar calibration lines concurrent with Raman spectra. We show that using the internal calibration we can improve the frequency precision for the spectra in our Raman images from ~±0.15 cm(exp -1) to ~±0.05 cm(exp -1) for Raman spectra collected over multiple days. This is important as it improves measurements of mineral chemistry, latent strain, and other features that are dependent upon accurate peak position determination. We also examine the spectral signal-to-noise ratio needed to minimize the frequency error when fitting bands to Gaussian/Lorentzian profiles. We then use our results to suggest a general method for calibrating the frequency of Raman spectra in large Raman images.

Jakubek, Ryan S.↗

NASA NTRS2018

Dating Igneous Rocks Using the Potassium–Argon Laser Experiment (KArLE) Instrument: A Case Study for ~380 Ma Basaltic Rocks

We report new K–Ar isochron data for two ~380 Ma basaltic rocks, using an updated version of the Potassium–Argon Laser Experiment (KArLE), which is being developed for future in situ dating of planetary materials. These basalts have K contents comparable with those of lunar KREEP basalts or igneous lithologies found by Mars rovers, whereas previous proof‐of‐concept studies focused primarily on more K‐rich rocks. We aim to measure these analogous samples to show the advancing capability of in situ K–Ar geochronology. Combining laser‐induced breakdown spectroscopy (LIBS), mass spectrometry (MS), and microscopic analyses, we measured the abundance of K and 40Ar from 23 spots on the basalt samples. We then constructed K–Ar isochron plots from these rocks. The breadboard instrument consists of flight‐equivalent devices including a 30‐mJ Nd:YAG laser and a quadrupole mass spectrometer. Despite much lower K abundances than in previous studies, the isochron slopes yielded 380 ± 44 Ma and 398 ± 50 Ma for 380.7‐Ma and 373.5‐Ma rocks, respectively, indicating that accuracy better than 25 Ma (<7%) is achievable with our instrument. The isochron intercepts both yielded trapped 40Ar approximately 1 × 10−6 cm3 STP/g. Our experimental results demonstrate that accurate and precise measurements are possible using the KArLE approach on basaltic rocks, which are ubiquitous on planetary surfaces, and are useful in addressing a wide range of questions in planetary science.

Yuichiro Cho↗

NASA NTRS2021

Radio Frequency Plasma Synthesis of Boron Nitride Nanotubes (BNNTs) for Structural Applications: Part III

The emergence of commercial quantities of BNNTs facilitates the exploration of structural material applications. BNNT-reinforced composites must exhibit extraordinary mechanical properties in order to justify the cost premium. Prevailing theory indicates that suitable BNNTs must possess an aspect ratio (AR= length/diameter) approaching 10,000 to provide effective discontinuous reinforcement under tensile loading. A survey of commercial products shows that although the quantities are sufficient, lots of uniform morphology are unavailable. Therefore, the opportunity exists to supplement procedures either during synthesis operations or post-synthesis processing in order to deliver homogeneous batches of high AR BNNTs. An assessment of relevant technologies reveals established methods compatible with sorting of BNNTs by physical dimensions, i.e., size and/or shape. Electrostatic fractionation emerges as the leading candidate, with the potential to isolate high-purity, low-defect, high AR product. The adaptation of existing equipment to the handling of fibrous particulate on the nanoscale will be paramount to success. Although currently focused on BNNTs, the concepts outlined may be applied to nanotubes synthesized from any organic or inorganic compounds. This survey sets the stage for delivering reproducible lots of BNNTs that satisfy the dimensional requirements for use in acreage structural materials.

induction plasma, BNNT, aspect ratio, fractionatio↗

NASA NTRSDate not supplied

Chronology of Steno Crater Basalt

The Apollo Next Generation Sample Analysis (ANGSA) program was designed to investigate specially curated samples returned by the Apollo 15 and 17 missions [1]. As part of this effort, we are examining a suite of Apollo 17 basalts collected from the rim of Steno Crater, to investigate the magmatic and post-magmatic volatile histories of these samples. Here we report initial 207Pb-206Pb chronology of accessory phases for two steno crater basalts, which will ultimately be paired with (40)Ar*/(39)Ar chronology and (38)Ar exposure ages to constrain crystallization and surface histories. The chronology of these samples will help determine if the samples derive from the one lava sequence or represent multiple lava flows, and will allow us to place petrologic and volatile data into the wider context of the magmatic suite [1,2]. Note: Extended abstract on document.

S. J. Pomeroy↗

NASA NTRS2022

CO Chondrite Parent Body Processing as Recorded by Noble Gases

**Introduction:** CO carbonaceous chondrites are among the most primitive meteorites, of which some experienced mild degrees of thermal alteration (up to 500 °C) in their parent asteroid. Previous studies on aqueously altered CM, CY and CR chondrites have shown that the noble gases preserved in those meteorites can be used to assess the extent of parent body processing. This is mostly due to an Ar-rich carrier phase being susceptible to aqueous alteration. In this study, we follow up on these findings by investigating the effects of mild thermal alteration on the noble gas content of CO chondrites. They are subclassified from petrologic subtype 3.0 (e.g., Yamato-81025) to 3.8 (e.g., Isna) according to the degree of thermal alteration experienced. Understanding these effects does not only help to distinguish the most primitive samples from the severely altered ones, but also adds to the picture of the primordial volatile composition and distribution, as preserved in the most primitive material which accreted from the solar nebula at different heliocentric distances. Additionally, we search for pairing among samples, as part of an ongoing survey of Antarctic CO chondrites. **Experimental:** Noble gas measurements were conducted on aliquots of ~20-25 mg from 16 different samples of varying petrologic subtype from 3.0 to 3.8. The gas extraction occurred in one temperature step at ~1700 °C, followed by separation into three fractions, He-Ne, Ar, and Kr-Xe, measured successively in a custom-built mass spectrometer. For each sample, complete gas extraction was verified by a re-extraction step at ~1750 °C. Details on the sample preparation and measurement protocols can be found in. **Results and Discussion:** In most cases, the gas concentrations for all five noble gases decrease with increasing petrologic subtype, and the trend is most pronounced for Ne. An exception is e.g. CO3.0 Colony, which is strongly terrestrially weathered. CO3.8 Isna shows an unusually short expo-sure time to cosmic rays (~0.15 Ma), which may be explained by a direct injection into a mean orbital resonance shortly after collision. The currently ill-defined Ar-rich carrier phase, found only in the least aqueously altered CM and CR samples, is still abundantly present in the predominately anhydrous CO chondrites, indicating that this component is less susceptible to moderately elevated temperatures. No CO chondrites examined so far contain solar wind, supporting the hypothesis that CO chondrites originate from the asteroidal interior. It thus remains enigmatic which material could account for the surface layer.

Noble gas↗

NASA NTRS2022

Colorado Eastern Plains Agriculture: Rangeland Monitoring to Inform Grazing Management in Eastern Colorado

Adaptive management on cattle ranches requires rangeland managers to decide the location and duration of the cattle grazing activity across different pastures. Biodiversity, forage availability, and cattle health are all affected by rangeland management. Virtual fencing is a tool that rangeland managers can use to potentially increase biodiversity and improve ranching operations. NASA DEVELOP and Colorado State University (CSU) collaborated with the Nature Conservancy (TNC), and Red Top Ranch to demonstrate the efficacy of virtual fencing. We sought to identify annual and monthly biomass patterns on the ranch through the creation of monthly max biomass productivity maps. We utilized a dataset from the Agricultural Research Service (ARS) to calculate biomass on the ranch. To validate our remotely-sensed results, we compared model-predicted biomass values to field-collected biomass clipping data and an additional biomass dataset from the Rangeland Analysis Platform (RAP). We used satellite imagery from Landsat 5 Thematic Mapper (TM), Landsat 7 Enhanced Thematic Mapper Plus (ETM+), Landsat 8 Operational Land Imager (OLI), Landsat 9 –OLI-2, and Sentinel-2 MultiSpectral Instrument (MSI) for 2021 and 2022. We found that there was heterogeneity in biomass across the ranch, with higher biomass on the western side. The highest peak of biomass was in the summer months, with a smaller peak in mid-September. The ARS biomass dataset had a significant relationship with RAP for 2021. ARS biomass did not have a significant relationship with the biomass field data collected in 2022. The results of our study are aimed to support rotation management, ranch production, biodiversity, and conservation management.

cattle↗

NASA NTRSDate not supplied

Astrobee: Completed, Current, and Future Research using Free Flying Robots on the International Space Station

After four years on the International Space Station (ISS), the Astrobee Research Facility, has completed over 130 Test Sessions logging over 1000 hours of operations. Managed by the NASA ISS Program OZ office and supported by NASA Ames Research Center (ARC) in California, the Astrobee Team maintains three identical free-flying Astrobee robots for research on the ISS. As a technology demonstration platform, the Astrobee Robots are available for Guest Scientists to use for a spectrum of research capabilities. Astrobee, propelled by battery-operated fans, is designed to autonomously operate throughout most of the USOS (US Orbital Segment), with the objective of minimizing astronaut support. Astrobee carries a suite of six cameras, a two degree-of-freedom (DOF) arm with a gripper that can grasp ISS handrails and other objects, and three payload bays that provide power and data for guest science hardware. Astrobee can autonomously execute hours-long flight plans or be teleoperated from the ground or by astronauts. While the Astrobee Team continues to improve mapping and autonomous flight capabilities, one of the main goals of Astrobee Robots is to provide research opportunities for Guest Scientists. The Astrobee Robot Software (ARS) makes extensive use of the open-source Robot Operating System (ROS). The ARS can be used interchangeably with an Astrobee Simulator or as Astrobee’s onboard software. ARS features include autonomous docking and perching, real-time teleoperations from the ground, plan based autonomous tasks, multi Astrobee communication, among other capabilities. Through simulation software and ground testing laboratories, the Astrobee Team is available to support Guest Scientists during development and testing and lead real-time ISS operations. Guest Scientists can participate in this research opportunity following the Guest Science Lifecycle (GSL) shown in Figure 1: Guest Science Lifecycle below. The Astrobee Team and Guest Scientists have complete research including Gecko materials studies, RFID and sound sensing capabilities, student Robotics Programming Challenges, and Free Flyer formation flight investigations. Current science with the Astrobee Robots includes Free Flyer self-toss studies, new docking capabilities, advanced mapping resolution capabilities, and high resolution panoramic imagery. Future Guest scientists and Astrobee Team research will focus on robotics applications for future NASA missions such as Gateway and Artemis and potential experiments involving human-robot interactions. This presentation will focus on four main subjects, 1) completed, current, and future planned research using the Astrobee robots, 2) how Guest Scientist get from conception to the ISS, 3) Astrobee Facility resources available for Guest Science ground testing and real-time ISS operations support, and 4) lessons learned from four years of ISS operations.

Astrobee↗

NASA NTRS2022

Plasma Composition Measurements in an Active Region from Solar Orbiter/SPICE and Hinode/EIS

A key goal of the Solar Orbiter mission is to connect elemental abundance measurements of the solar wind enveloping the spacecraft with extreme-UV (EUV) spectroscopic observations of their solar sources, but this is not an easy exercise. Observations from previous missions have revealed a highly complex picture of spatial and temporal variations of elemental abundances in the solar corona. We have used coordinated observations from Hinode and Solar Orbiter to attempt new abundance measurements with the Spectral Imaging of the Coronal Environment (SPICE) instrument, and benchmark them against standard analyses from the EUV Imaging Spectrometer (EIS). We use observations of several solar features in active region (AR) 12781 taken from an Earth-facing view by EIS on 2020 November 10, and SPICE data obtained one week later on 2020 November 17, when the AR had rotated into the Solar Orbiter field of view. We identify a range of spectral lines that are useful for determining the transition region and low-coronal-temperature structure with SPICE, and demonstrate that SPICE measurements are able to differentiate between photospheric and coronal magnesium/neon abundances. The combination of SPICE and EIS is able to establish the atmospheric composition structure of a fan loop/outflow area at the AR edge. We also discuss the problem of resolving the degree of elemental fractionation with SPICE, which is more challenging without further constraints on the temperature structure, and comment on what that can tell us about the sources of the solar wind and solar energetic particles.

Solar physics↗

NASA NTRS2023

Joint Augmented Reality Visual Informatics System: Concept of Operations

NASA proposed requirements for a digital display for an EVA spacesuit to provide relevant information to the crew member. The Joint Augmented Reality Visual Informatics System (Joint AR) project pursued four years of research and development towards a suit-display system in a near-eye, AR form factor. The project was responsible for developing software (custom graphics engine and core flight software), physical hardware prototyping (controls, projection display optics, suited display platform), virtual prototyping platform (a virtual reality testbed), and human-in-the-loop (HITL) operational testing informed by EVA flight controllers, crew members, and human factors engineers for con-ops definition. This document contains substantial updates to CTSD-ADV-1788 Rev. Basic. This revision was produced by the project to summarize the use-cases and and user experiences developed throughout the project, and refine the Basic revision originally drafted at the beginning of the project life cycle. The primary purpose of this document is to summarize and make available the scenario development efforts that have been pursued and explored within the Joint AR project. This includes descriptions of the scenarios themselves as well as corresponding potential of advanced informatics displays to support those specified scenarios. In doing so, this document provides a variety of approaches to deconstruct and hypothesize how future technological capabilities so that with future EVA work demands can be satisfied within future human planetary spaceflight missions.

Matthew Miller↗

NASA NTRSDate not supplied

Summary of NASA Progress on the Development and Qualification of a 12-kW Hall-Effect, Solar Electric Propulsion Thruster

Beginning in 2014, the National Aeronautics and Space Administration (NASA) Space Technology Mission Directorate (STMD) began a project to increase the state of the art for the Hall-Effect Solar Electric Propulsion (SEP) technology. The Technology Demonstration Missions (TDM) Program Office provides programmatic oversight of SEP with the project being led by Glenn Research Center, supported by the Jet Propulsion Laboratory and development, qualification & flight hardware all provided by Aerojet Rocketdyne (AR). This technology was pursued as the propulsion system for the Asteroid Redirect and Robotic Mission (ARRM). While the concept was originally slated for ARRM, it was realigned to Gateway to support future Moon to Mars objectives. The Gateway lunar station was established and will play a key role in NASA’s Artemis Program which utilizes collaboration with the Canadian Space Agency (CSA), the European Space Agency (ESA) and the Japanese Space Agency (JAXA). The 12-kW hardware will be the primary propulsion for the Gateway element, Power & Propulsion Element (PPE), from Low Earth Orbit to a Near Rectilinear Halo Orbit around the Moon. Initial efforts began with utilizing Technology Development Units (TDU) built by NASA as the predecessor to the contract activity with AR. Over the past few years, AR has built Engineering Test Units (ETU), Engineering Development Units (EDU) and qualification & flight models (QM and FM, respectively). With requirement changes from the AARM mission to PPE, the joint team has modified the design and has started qualification activities for environment testing (shock, vibe) at multiple facilities in the US leading to eventual life testing. This paper will explore the various design changes, system modeling and the latest status for qualification testing.

Joel Robinson↗