Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Apertures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Large- and small-scale spatial evolution of digitally processed ocean wave spectra from Seasat synthetic aperture radar

The threshold behavior of the azimuth response falloff in Seasat SAR imagery and its implications with respect to existing wave imaging theories is examined. The large-scale spatial evolution of a set of eight SAR image spectra with adjacent spacing of about 100 km, spanning about 700 km along the satellite orbit is considered. The small-scale evolution of a sequence of 23 spectra with adjacent spacing of about 2.2 km, spanning only about 48 km but experiencing depth changes from 200 to 35 m as well as unknown currents in the vicinity of the continental shelf is studied. The large-scale spatial evolution of the spectrum is generally consistent with the location of wave-generating sources, even when multiple wave systems are present. On a more local scale, the nearshore wave number spectrum responds to local depth changes but is too noisy to respond reliably to local current changes.

Beal, R. C.↗
NASA NTRS1983

Seasat synthetic aperture radar /SAR/ response to lowland vegetation types in eastern Maryland and Virginia

Examination of Seasat SAR images of eastern Maryland and Virginia reveals botanical distinctions between vegetated lowland areas and adjacent upland areas. Radar returns from the lowland areas can be either brighter or darker than returns from the upland forests. Scattering models and scatterometer measurements predict an increase of 6 dB in backscatter from vegetation over standing water. This agrees with the 30-digital number (DN) increase observed in the digital Seasat data. The brightest areas in the Chickahominy, Virginia, drainage, containing P. virginica about 0.4 m high, contrast with the brightest areas in the Blackwater, Maryland, marshes, which contain mature loblolly pine in standing water. The darkest vegetated area in the Chickahominy drainage contains a forest of Nyssa aquatica (water tupelo) about 18 m high, while the darkest vegetated area in the Blackwater marshes contains the marsh plant Spartina alterniflora, 0.3 m high. The density, morphology, and relative geometry of the lowland vegetation with respect to standing water can all affect the strength of the return L band signal.

Krohn, M. D.↗
NASA NTRS1983

Aperture synthesis observations of Orion B at 2.695 and 8.085 GHz

Interferometer observations of Orion B at 2.695 and 8.085 GHz are presented. Orion B appears to be a double source: one H II region associated with the star NGC 2024 No. 2 and an extended H II region surrounding the star NGC 2024 No. 1. This structure gives support to the model that the stars NGC 2024 No. 2 and No. 1 (of spectral type O 9.5 and B 0.5, respectively) ionize the nebula.

Wink, J. E.↗
NASA NTRS1982

Urban land use classification using synthetic aperture radar

In the cases of such land uses as the commercial and industrial, the incorporation of microwave data to that available from the visible and near visible regions may increase classification accuracy, provided that the limitations inherent in radar data are taken into consideration. Attention is presently given to several approaches to the use of radar data in land use classification of urban and near urban areas, with emphasis on L-band horizontal transmit and horizontal receive data available from Seasat-A. The Los Angeles, CA metropolitan area provides the geographic focus for this study.

Bryan, M. L.↗
NASA NTRS1983

Urban land use classification using synthetic aperture radar

Several approaches to the use of radar imagery for land use classification of urban and near-urban areas are presented. The use of L band, horizontal transmit, and horizontal receive data is emphasized because of their general availability. For urban area studies using imaging radar, the effects of processing in an off-zero Doppler or squint mode, of the presence of large diffuse scatters, and of the possibility of height measurements are discussed. Data from the Los Angeles area are illustratively used.

Bryan, M. L.↗
NASA NTRS1983

Interactive analysis of a large aperture Earth Observations Satellite

A system level design and analysis has been conducted on an Earth Observation Satellite (EOS) system using the Interactive Design and Evaluation of Advanced Spacecraft (IDEAS) computer-aided design and analysis program. The IDEAS program consists of about 40 user-friendly technical modules and an interactive graphics display. The reflector support system and feed mast of the EOS spacecraft are constructed with a box-truss structural concept, a lattice configuration which can be packaged for delivery in a single Shuttle flight and deployed in orbit. The deployed spacecraft consists of a 120-m by 60-m parabolic reflector, a 120-m-long support structure, and a 30-m feed arc beam on the focal axis. The spacecraft was modeled for structural, thermal, and control systems analysis and structural elements were designed. On-orbit dynamic and thermal loading analyses were conducted and spacecraft weights were determined.

Wright, R. L.↗
NASA NTRS1983

A large aperture balloon-borne telescope for a submillimeter wavelength survey of the galactic plane

A balloon-borne, 1.2 meter Cassegrain telescope with a servo-controlled chopping secondary mirror has been developed and used to survey the Galactic Plane at submillimeter wavelengths. The telescope pointing system uses a gyroscope as the primary stabilization reference and makes use of microprocessors for pointing control, on-board data collection, and telemetry formatting. A description of the telescope, multi-channel liquid-helium-cooled focal plane and the aspect and orientation subsystems are presented.

Silverberg, R. F.↗
NASA NTRS1983

Ambiguities in spaceborne synthetic aperture radar systems

An examination of aspects of spaceborne SAR time delay and Doppler ambiguities has led to the formulation of an accurate method for the evaluation of the ratio of ambiguity intensities to that of the signal, which has been applied to the nominal SAR system on Seasat. After discussing the variation of this ratio as a function of orbital latitude and attitude control error, it is shown that the detailed range migration-azimuth phase history of an ambiguity is different from that of a signal, so that the images of ambiguities are dispersed. Seasat SAR dispersed images are presented, and their dispersions are eliminated through an adjustment of the processing parameters. A method is also presented which uses a set of multiple pulse repetition sequences to determine the Doppler centroid frequency absolute values for SARs with high carrier frequencies and poor attitude measurements.

Li, F. K.↗
NASA NTRS1983

Amplitude calibration of spaceborne synthetic aperture radars

Problems encountered during attempts to calibrate SAR imagery, recent successful experiments conducted with SEASAT SAR data, and a proposed program for the calibration and validation of the radar imagery from the forthcoming SIR-B SAR are discussed. The SEASAT SAR data for 10 passes over Death Valley, California, were processed with a modified digital correlator. The procedure included a preliminary screening of the data to check for raw data saturation, compensation of waveforms and estimation of the amplitude of the pilot tone. All data was normalized to this pilot tone signal to reduce the effects of variable gains in the data links and ground receivers. The digital correlation algorithm generated image data. Evaluation of 6 passes results in a maximum pass to pass gain variation of only 1.1 dB and a standard deviation amongst the passes of 0.35 dB. previously announced in STAR as N83-26215

Held, D. N.↗
NASA NTRS1982

Edge detection for synthetic aperture radar and other noisy images

The development is examined of a new edge detector which is shown to perform adequately in the non-Gaussian multiplicative noise environment which characterizes radar images. This edge detector operates over larger local neighborhood and is less susceptible to noise than previous edge detectors and is therefore more suitable for radar. In addition, a radar image noise model is employed for the design of this new operator. This edge detector is unique in that it is assumed that every local area belongs to either the class of local areas not containing edges or to the class of local areas containing edges. Each pixel's local neighborhood is then assigned to one of these two classes using a statistical hypothesis (a likelihood ratio) test. It is demonstrated that this algorithm is useful for detecting edges in radar images.

Frost, V. S.↗
NASA NTRS1983

Multifrequency synthetic aperture radar antenna comparison study

Three multifrequency, dual polarization SAR antenna designs are reviewed. The SAR antenna design specifications were for a "straw man' SAR which would approximate the requirements for projected shuttle-based SAR's. Therefore, the physical dimensions were constrained to be compatible with the space shuttle. The electrical specifications were similar to those of SIR-A and SIR-B with the addition of dual polarization and the addition of C and X band operation. Early in the antenna design considerations, three candidate technologies emerged as having promise. They were: (1) microstrip patch planar array antennas, (2) slotted waveguide planar array antennas, and (3) open-ended waveguide planar array antennas.

Blevins, B. A.↗
NASA NTRS1983

Solar tests of aperture plate materials for solar thermal dish collectors

In parabolic dish solar collectors, walk-off of the spot of concentrated sunlight is a hazard if a malfunction causes the concentrator to stop following the Sun. Therefore, a test program was carried out to evaluate the behavior of various ceramics, metals, and polymers under solar irradiation of about 7000 kW/sq m. (peak) for 15 minutes. The only materials that did not slump or shatter were two grades of medium-grain extruded graphite. High purity, slip-cast silica might be satisfactory at somewhat lower flux. Oxidation of the graphite appeared acceptable during tests simulating walk-off, acquisition (2000 cycles on/off Sun), and spillage (continuous on-Sun operation).

Jaffe, L. D.↗
NASA NTRS1984

Real-time synthetic aperture radar processing

Real-time acousto-optic SAR processors are described and experimentally demonstrated. SAR imaging is performed in one of the architectures by applying the signal to an acousto-optic device and correlating it with chirp signals recorded on an optical transparency by time integration on a CCD detector. In a different implementation, the imaging is preformed by interfering the light beams diffracted from two separate acousto-optic devices, one modulated the radar signal and the second by the reference chirp waveform.

Psaltis, D.↗
NASA NTRS1984

On the response to ocean surface currents in synthetic aperture radar imagery

The balance of wave action spectral density for a fixed wave-number is expressed in terms of a new dimensionless function, the degree of saturation, b, and is applied to an analysis of the variations of this quantity (and local spectral level) at wave-numbers large compared to that of the spectral peak, that are produced by variations in the ocean surface currents in the presence of wind input and wave breaking. Particular care is taken to provide physically based representations of wind input and loss by wave breaking and a relatively convenient equation is derived that specifies the distribution of the degree of saturation in a current field, relative to its ambient (undisturbed) background in the absence of currents. The magnitude of the variations in b depends on two parameters, U(o)/c, where U/(o) is the velocity scale of the current and c the phase speed of the surface waves at the (fixed) wave-number considered or sampled by SAR, and S = (L/lambda) (u*/c)(2), where L is the length scale of the current distribution, lambda the wavelength of the surface waves the length scale of the current distribution, lambda the wavelength of the surface waves and u* the friction velocity of the wind.

Phillips, O. M.↗
NASA NTRS1984

Parametric analysis of synthetic aperture radar data acquired over truck garden vegetation

An airborne X-band SAR acquired multipolarization and multiflight pass SAR images over a truck garden vegetation area. Based on a variety of land cover and row crop direction variations, the vertical (VV) polarization data contain the highest contrast, while cross polarization contains the least. When the radar flight path is parallel to the row direction, both horizontal (HH) and VV polarization data contain very high return which masks out the specific land cover that forms the row structure. Cross polarization data are not that sensitive to row orientation. The inclusion of like and cross polarization data help delineate special surface features (e.g., row crop against non-row-oriented land cover, very-rough-surface against highly row-oriented surface).

Wu, S. T.↗
NASA NTRS1983

The information content of synthetic aperture radar images of terrain

A statistical model is developed that portrays an imaging radar as a noisy communication channel with multiplicative noise, and the model is used to evaluate the average amount of information that can be extracted about a target from its radar image. The average information content is also used to define a measure of radiometric resolution for radar images. It is shown that the information content and the resolution capabilities of an imaging radar reach a limit beyond which an increase in scene dynamic range does not improve the information content or the resolution. This limitation results from the multiplicative nature of the noise introduced in the imaging process.

Frost, V. S.↗
NASA NTRS1983

Synthetic aperture radar imaging using acousto-optics and charge-coupled devices

The operating principles of an acoustooptic/CCD real-time SAR processor are described, and experimental results are presented. Particular consideration is given to time-and-space integrating processing, the range processor, and the azimuth processor. The interferometric detection scheme is examined in detail.

Psaltis, D.↗