Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Advanced nuclear”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Modeling of the High Temperature Test Facility Using RELAP-7

The High Temperature Test Facility (HTTF) at Oregon State University (OSU) is an electrically heated, helium cooled, experimental facility. The HTTF was modeled using RELAP-7 in both 1-D and 3-D for validation. Due to core symmetry, 1/6th of the HTTF core was modeled in 3-D using the coupled heat conduction and forced convection capabilities of RELAP-7. This served as a validation case for RELAP-7 and its capabilities to model advanced nuclear technologies such as high temperature gas-cooled reactors.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Analyzing Foreign and Domestic Policy to Determine a Pathway to Achieving the US' NDC with a Focus on Advanced Reactors and Hydrogen

The United states in 2021 released a nationally determined contribution indicating goals to reach 50-52% reduction in CO2 emissions by 2030 compared with 2005 and to achieve zero carbon electricity by 2035. Current policy does not put us on course to achieve these goals, so we investigated policies that could form a pathway to achieve these goals in the US. We focused on the use of advanced nuclear reactors and hydrogen, but analyzed all relevant sectors to achieve our goals. This report also focuses on analyzing existing foreign policies and determining the most effective policies in each sectors. By combining the most effective policies from around the world in each sector, we find that we can set policies that form a pathway that is ambitious enough to meet the NDC goals.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Evaluating Scaling Effects of Steam Condensation Physics-based Model for Small Modular Reactor

This study focused on assessing condensation heat transfer (CHT) models for enhancing the passive safety of small modular reactors (SMRs). It also encompassed a review of the theoretical and semi-theoretical CHT models and correlations. Condensation models such as the degradation factor, heat and mass transfer analogy (HMTA), and boundary layer models are used to study advanced nuclear reactor PCCS. The previous CHT models were developed for small tube geometries, which differ from the containment of SMR. This study examined the scaled relations of a physics-based CHT model for analyzing laminar and turbulent film condensation downward flow conditions inside scaled tube geometries.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Presentation: Evaluating scaling effects of steam condensation physics-based model for small modular reactors safety

This study focused on assessing condensation heat transfer (CHT) models for enhancing the passive safety of small modular reactors (SMRs). It also encompassed a review of the theoretical and semi-theoretical CHT models and correlations. Condensation models such as the degradation factor, heat and mass transfer analogy (HMTA), and boundary layer models are used to study advanced nuclear reactor PCCS. The previous CHT models were developed for small tube geometries, which differ from the containment of SMR. This study examined the scaled relations of a physics-based CHT model for analyzing laminar and turbulent film condensation downward flow conditions inside scaled tube geometries.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A Summary of the Microstructural Characterization Results for the A709 Commercial Heats

To improve high temperature strength for advanced nuclear reactors, it is necessary to qualify additional structural materials for introduction into the American Society of Mechanical Engineers (AMSE) Boiler and Pressure Vessel Code (BPVC). Specifically, Alloy 709 was identified as a material for Sodium-cooled Fast Reactors to enhance time-dependent mechanical properties compared to 316H stainless steel, a code qualified high temperature alloy. Idaho National Laboratory (INL) and Oak Ridge National Laboratory (ORNL) performed initial microstructure and mechanical property testing on a third, commercial heat of Alloy 709 stainless steel. The Alloy 709 plate was produced by Allegheny Technology Inc. (ATI) and in the solution annealed condition. The chemical composition was within the limits for an American Society of Testing and Materials (ASTM) A213 specification for seamless tube for material UNS S31025. Grain size was measured as an average ASTM size of 6.5, which was larger than the ASTM 7 required according to ASTM A213 for seamless tube. The chemical composition was within the limits for an ASTM A213, and the room temperature tensile tests and hardness data met ASTM A213 specifications. Creep-fatigue results showed similar behavior to previous heats of Alloy 709.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

STAND Quickstart Guide

STAND is a flexible web application designed to identify and examine potentially feasible sites where advanced nuclear facilities might be welcomed by host communities. STAND allows the user to explore and provide insight on socioeconomic, proximity, and safety data, generate county reports, review regulatory data, and complete a comparative analysis across multiple sites by following several paths, either individually or sequentially based on the user’s needs and where they are in the deployment process. STAND is best used for the contiguous United States. STAND is not a substitute for the in-depth studies required to qualify a site for hosting a nuclear facility, nor is it a substitute for the necessary community engagement to build trust and seek consent. It can, however, be a valuable resource to aid in the siting process.

99 GENERAL AND MISCELLANEOUS↗

STAND Quickstart Guide

STAND is a flexible web application designed to identify and examine potentially feasible sites where advanced nuclear facilities might be welcomed by host communities. STAND allows the user to explore and provide insight on socioeconomic, proximity, and safety data, generate county reports, review regulatory data, and complete a comparative analysis across multiple sites by following several paths, either individually or sequentially based on the user’s needs and where they are in the deployment process.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

MRS: Surveillance Test Article Development

The presentation covers work performed in FY23 on surveillance test article development. Surveillance test articles have been used of integrity assessment in light water reactor plants, this work seeks to develop a specimen that is passively loaded and could be used in advanced nuclear reactors for structural material health monitoring.

36 MATERIALS SCIENCE↗

Reliability of thickness of oxide layer of stainless steels with chromium using cellular automaton model

A cellular automaton (CA) model based on the stochastic approach was proposed to simulate the process of oxidation and corrosion of stainless steels with different contents of chromium in-flowing lead bismuth eutectic (LBE). Chromium is a crucial alloying element added in stainless steels and nickel based alloys which have been proposed to be used in advanced nuclear reactors to improve resistance of the oxidation and corrosion. To verify the reliability of the thickness of the oxide layer by CA model, the influence of the stochastic character on the simulating results was investigated as changing parameter of chromium content of structure material in this study. Ten independent simulations were run for each specific environment. A stable and reasonable results were obtained according to the chi-square of goodness-of-fit test, the chi-square of the thickness of oxide layer for each case were significant smaller than critical chi-square value with a confidence level of 95% ({Chi}{sup 2}{alpha}, v = {Chi}{sup 2} 0.05,9 = 16.92). (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Increasing the power density when using inert matrix fuels to reduce production of transuranics

Reducing the production of transuranics is a goal of most advanced nuclear fuel cycles. One way to do this is to recycle the transuranics into the same reactors that are currently producing them using an inert matrix fuel. In previous work we have modeled such a reactor where 72%, of the core is comprised of standard enriched uranium fuel pins, with the remaining 28% fuel made from Yttria stabilized zirconium, in which transuranics are loaded. A key feature of this core is that all of the transuranics produced by the uranium fuel assemblies are later burned in inert matrix fuel assemblies. It has been shown that this system can achieve reductions in transuranic waste of more than 86%. The disadvantage of such a system is that the core power rating must be significantly lower than a standard pressurized water reactor. One reason for the lower power is that high burnup of the uranium fuel precludes a critical level of reactivity at the end of the campaign. Increasing the uranium enrichment and changing the pin pitch are two ways to increase burnup while maintaining criticality. In this paper we use MCNPX and a linear reactivity model to quantify the effect of these two parameters on the end of campaign reactivity. Importantly, we show that in the region of our proposed reactor, enrichment increases core reactivity by 0.02 per percent uranium 235 and pin pitch increases reactivity by 0.02 per mm. Reactivity is lost at a rate of 0.005 per MWd/kgIHM uranium burnup. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Multi-objective optimization of a PCHE-type intermediate heat exchanger using genetic algorithms

For the advanced nuclear reactor systems and power conversion units, it is important to optimize the design of intermediate heat exchangers (IHXs) which transfer heat from the primary loop to the secondary or intermediate loop. For a multi-objective optimization problem, a printed circuit heat exchanger-type IHX with zigzag and S-shaped fin channels is selected to be optimized in terms of both the total cost and the heat exchanger thermal effectiveness using genetic algorithms. A computer code is developed to search a set of optimized designs of the zigzag channel geometry. It is found that among the Pareto-optimal solutions, the total cost is approximately linearly related to the thermal effectiveness between 88 and 95% while it rises rapidly after the effectiveness exceeds 95%. An optimal flow channel diameter is also determined through the optimization. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Finite Volume Method Based Neutronic Solvers for Steady and Transient Analysis of Molten Salt Reactors

In recent years, the coupled neutronics and thermal hydraulics analysis becomes more and more important, because it helps to identify the most relevant safety issues without conservative assumptions. In addition, such coupled simulations are essential for the generation IV advanced nuclear power systems such as molten salt reactor (MSR), because the presence of strong coupling between different phenomena, like the transport of delayed neutron precursors by the fluid flow?. Due to the different discretization methods used in reactor physics analysis and thermal-hydraulics analysis, it is hard to couple different kinds of codes. This work presents an attempt to solve the multigroup neutron diffusion equation with the finite volume method which is quite widely used for the numerical simulation of a variety of applications involving fluid flow and heat and mass transfer. The unstructured finite volume method (FVM) based on open source C++ library OpenFOAM was chosen as the development platform?. The objective of this paper is to concisely present the main features of the developed codes in terms of the theoretical background and numerical approach and as can be seen in the following sections, the calculation results obtained by the NDSFoam which solves the steady-state neutron diffusion equation and NDTFoam which solves the transient-state neutron diffusion equation are discussed and compared to the benchmark problems. In this paper, two new neutronic solvers using finite volume method have been developed to perform the neutron physics analysis. The solvers are based on OpenFOAM, and have been tested with several steady state and transient-state benchmark problems. By verifications of the codes, it is proved that the development of NDSFoam and NDTFoam are correct. In our future work, both of these two solvers will be coupled with the precompiled CFD solvers in OpenFOAM to analyze the molten salt fast reactors. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Fabrication and Testing of Complex Silicon Carbide Composite Structures

The ability to fabricate larger complex silicon carbide composites is an enabling technology for advanced reactors. Processing techniques to make complex SiC/SiC structures must be versatile enough to facilitate fabrication of both very large components (>1 m), as well as very small feature sizes (<1 mm), minimize the amount of machining required to complete the final part, and must also provide composite material with similar performance to bulk properties previously established for planar SiC/SiC composite material. This paper presents results on fabrication of complex silicon carbide structures and targeted testing aimed specifically at understanding how complex features impact composite performance. Silicon carbide (SiC) and silicon carbide matrix, silicon carbide fiber-reinforced composites (SiC/SiC) are a strong candidate for cladding and core structure used in advanced reactor concepts such as General Atomics' (GA) Energy Multiplier Module (EM{sup 2}) as well as accident tolerant fuel (ATF) in LWRs. SiC retains its strength up to very high temperatures, is stable under irradiation, and shows favorable neutronics and oxidation resistance compared to alloy alternatives. However, unlike metals, SiC cannot be easily machined, formed or welded to make the more complex core components needed to fully realize the benefits of advanced high temperature reactors. TEP processing provides an appealing route to achieving SiC/SiC composite structures with enhanced feature complexity. This is a critical development in the maturation of SiC/SiC for in-core structural materials in advanced reactors. This processing route provides an avenue to make large, dense, complex structures. Experiments have shown retention of strength and pseudo-ductility with hole spacing as small as 4 mm with potential for still smaller feature spacing. The results indicate that feature spacing is not limited by processing effects, but instead by the fiber architecture. The lower limit of feature spacing will likely have implications on potential core loading limits in advanced nuclear reactors utilizing SiC/SiC. (authors)

36 MATERIALS SCIENCE↗

Comparison of Ion and Neutron Irradiations to 3 dpa at 500 deg. C in Ferritic-Martensitic Alloys

The growing global demand for energy will increasingly call upon advanced nuclear fission reactors to supply safe and reliable electricity. The structural and fuel cladding components of these reactors will be subject to extreme conditions of irradiation damage up to several hundred displacements per atom (dpa) at temperatures as high as 700 deg. C. Ferritic-martensitic (F-M) steels are leading candidates for these challenging conditions due to their strength and dimensional stability under irradiation. In order to accelerate the process for evaluating F-M alloys, charged particles are increasingly being used to emulate neutron irradiations. Charged particle irradiations allow the possibility of conducting irradiation experiments within a shorter time period (i.e. at a rate up to 4 orders of magnitude faster) and with minimal radioactivation of the material, enabling lower cost and faster turnaround of post irradiation examination and analysis. However, the irradiation dose rate, damage cascade morphologies, and irradiation damage depth profiles all differ widely between protons, heavier ions, and neutrons. Currently, there is limited understanding of the significance of these physical differences and how they manifest in the irradiated microstructure and mechanical properties of F-M steels. The objective of this study is to evaluate charged particles as a surrogate for neutron irradiations in F-M alloys by assessing common irradiation conditions using Fe{sup ++} ions, protons, and neutrons. Keeping the temperature and dose consistent enables isolation of the effects of each irradiating particle and their respective dose rates and cascade morphologies. Specimens of HCM12A and HT9 were irradiated separately with protons, self-ions, and neutrons to a common dose of 3 dpa at 500 deg. C. The microstructure of each specimen was characterized with TEM and LEAP and compared to evaluate proton and self-ion irradiation as a surrogate for neutron irradiation at these conditions. - Proton, self-ion, and neutron irradiations produced consistent sizes and number densities of grains, carbides, dislocation lines, and dislocation loops. Voids were absent in all conditions. The charged particle irradiations have successfully reproduced the neutron irradiation results for these microstructural features without a temperature shift. - Nano-cluster evolution of Si-Mn-Ni-P and Cu-rich clusters was markedly different for each irradiating particle type. Some cluster morphology trends could be explained by differences in cascade volume for differing irradiating species. But dose rate likely also influences cluster evolution. - Cr-rich nanoclusters nucleated only in the neutron-irradiated HCM12A and HT9. This is likely due to thermal aging at 500 deg. C over a longer experimental time, as compared to the proton and self-ion irradiations. (authors)

36 MATERIALS SCIENCE↗

Microstructural Characterization of Irradiated Fuels and Materials for the United States High Performance Research Reactor Fuel Development Program and the Fuel Cycle Research and Development Program

In an effort to contribute to the development of advanced nuclear fuel for research reactors, monolithic and dispersion plate fuels will be examined to determine how irradiation parameters such as fission density, fission rate, and irradiation temperature, as well as mechanical parameters such as composition and fabrication, affect the final microstructure of the fuel, post irradiation. Electron Backscatter Detection (EBSD) analysis capabilities of irradiated materials will be developed as well as improvements on irradiated sample preparation in order to provide higher quality samples for SEM, FIB, and TEM. In addition, image analysis techniques developed at Idaho National Laboratory (INL) will be employed to examine microstructural features such as fission product precipitates and fission gas bubbles. The main goals are to further develop EBSD capabilities on irradiated material; characterize microstructure of irradiated fuel to support qualification; develop a consistent, effective process for image analysis using INL developed software; and provide repeatable, statistically-confident, critically assessed data to further modeling efforts. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Materials Characterization using the Facilities of the Center for Synchrotron Radiation Research and Instrumentation (CSRRI), a NSUF Partner Facility

Advanced nuclear energy systems are envisioned to operate at high temperatures, high burn-up, harsh neutron irradiation, and corrosive environments. New materials and nuclear fuels with improved performance, safety and reliability are needed for the increasingly demanding operating conditions. The fundamental challenge in developing new materials with improved irradiation, temperature, and corrosion resistance is to understand and control chemical and physical phenomena in complex systems over multiple time and length scales. Solving these scientific and technical challenges will require an integrated approach of all available computational and experimental capabilities. This talk will focus on the application of synchrotron radiation techniques to characterize materials of interest to nuclear material science at the facilities operated by the Center For Synchrotron Radiation Research and Instrumentation (CSRRI) at the Illinois Institute of Technology. The CSRRI is a partner facility with the U. S. Department of Energy's Nuclear Science User Facility (NSUF). Using the CSRRI facilities, such as the Materials Research Collaborative Access Team (MRCAT) beamline, we can study the materials science of irradiated and model materials to improve the understanding of the performance of materials in nuclear reactors. (author)

36 MATERIALS SCIENCE↗

Effect of Irradiation on Strengthening of a Model Fe-9Cr Oxide Dispersion Strengthened Alloy

The growing energy demand will increasingly call upon advanced nuclear reactors to supply safe and reliable energy worldwide. However, structural and cladding materials in these reactors will be subject to extreme conditions of up to a few hundred displacements per atom (dpa) at temperatures as high as 600 deg. C. Oxide dispersion strengthened (ODS) alloys are leading candidates for these components because their dispersion of Y-Ti-O nanoclusters provides high strength at elevated temperatures and dimensional stability under irradiation. But recent work has suggested that the oxides are unstable under irradiation, which has serious implications on mechanical performance. Thus, the objective of this work is to understand the change in strengthening mechanisms of an Fe-9Cr ODS alloy under irradiation. We use two approaches to assess strengthening of a proton-irradiated and neutron-irradiated Fe-9Cr ODS. First, nanoindentation directly measures changes in yield strength. Second, microstructure measurements are passed through models of two strengthening mechanisms. Results of these two approaches are compared to infer the strengthening mechanisms in the irradiated ODS alloy. A model Fe-9Cr ODS steel was irradiated to 3 dpa at 500 deg. C using either 2.0 MeV protons or a fast neutron spectrum. Both irradiation types induced the formation of dislocation loops and voids. Both proton and neutron irradiation resulted in dissolution of oxide nanoclusters, though neutron irradiation led to much more extensive oxide nano-cluster dissolution. The irradiated microstructure was used to predict irradiation hardening by considering both the precipitation strengthening and solid solution strengthening mechanisms. Due to more extensive oxide nano-cluster dissolution under neutron irradiation, the solid solution strengthening mechanism must be considered in order for the predicted change in yield strength to be comparable to that measured by nanoindentation. (authors)

36 MATERIALS SCIENCE↗

Development of Waste Disposal Strategy for RH LLW Stored in the ATR Canal - 19453

The Advanced Test Reactor (ATR), located at Idaho National Laboratory (INL), is 250 megawatt research reactor designed and operated for the United States Department of Energy for irradiation testing of advanced nuclear fuels and material samples. The pressurized light-water moderated and cooled reactor achieved criticality in 1967. It is designed to allow high neutron flux irradiation of structural materials and nuclear fuels to replicate long-term exposure of materials in traditional lower-flux reactor cores. The ATR also produces rare isotopes for the use in the medical and other industries. The ATR is one of only four reactors in the world with this high-flux irradiation capability. Adjacent to the ATR is a water-filled canal which is used to handle casks, prepare experiments, perform irradiation experiments, and store irradiated components generated from reactor operations. The canal is used to store irradiated (activated) metals that are subsequently determined to be waste. In many instances, these items are too radioactive to remove from the canal and remain in temporary storage until a sufficient decay period has elapsed to where they can be safely removed. The more highly-radioactive remote-handled (RH) waste items requiring hundreds of years to decay have been in storage in the canal since the first ATR core internal changeout (CIC) which was conducted in the 1970's. The INL has recently completed construction and startup of a new Remote-Handled Low-Level Waste (RH LLW) Disposal Facility, which will serve as the final disposal capability for legacy RH (greater than 200 mR/hr on contact) metal waste currently stored in the canal. The ATR will need to develop a method for packaging, characterizing, removing, and shipping this material to the new disposal facility. Based on the configuration of the new disposal cells at the RH LLW Disposal Facility, the ATR must produce an entire new process for handing and packaging the legacy RH waste and preparing it for transport and final disposal. The ATR Canal RH LLW Cleanup Project scope is to develop the processes, tools, and equipment for safely sizing, packaging, and removing RH LLW from the canal. This paper presents highlights and challenges the project faces to develop and implement this capability: - Designing new tools, fabricating new equipment, and implementing new processes at an active Hazard Category-I nuclear facility. - Ensuring new equipment and tools are compatible with the existing equipment and processes at both the generator and the disposal facilities. - Sizing legacy waste under water using remote tools and equipment to minimize void space in waste disposal canisters while ensuring as low as reasonably achievable (ALARA) goals are met. - Loading waste containers underwater and preparing them to meet the liquid-free criteria of the disposal facility waste acceptance criteria (WAC). - Providing a new shielded transport container to transfer waste from ATR to the new on-site RH LLW Disposal Facility. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗