Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARSENIC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

High-pressure neutron powder diffraction study of an arsenolite deuterium inclusion compound: structure and formation kinetics

High-pressure variable-temperature neutron powder diffraction was employed to investigate the synthesis and structural properties of arsenolite (As 4 O 6 ), a cubic arsenic( III ) oxide polymorph, and its inclusion compound with deuterium. The compound forms with the stoichiometry As 4 O 6 ·2D 2 , consistent with earlier findings. At 295 K and 1.96(2) GPa, D 2 molecules occupy the 16c site (0, 0, 0) and are aligned along the <111> direction. The diffraction data suggest that the D 2 molecules at this site become rotationally disordered upon decompression to 0.78(2) GPa at 120 K, while no occupancy is observed at the 8a position (⅛, ⅛, ⅛) under any of the studied conditions. The kinetic data of the high-pressure inclusion compound synthesis at 1.56(2) and 1.96(2) GPa were analyzed using the Avrami model. The Avrami exponent, 0.135(16), remains invariant with pressure, demonstrating that the reaction topochemistry is unaffected by compression. Similarly, the reaction rates, 0.29(3) and 0.23(3) min −0.135 at 1.56(2) and 1.96(2) GPa, respectively, exhibit negligible pressure dependence and suggest a surprisingly low activation volume of 1.6 cm 3 mol −1 for the reaction. These results provide detailed insight into the structural dynamics and kinetics of deuterium inclusion in arsenolite under high pressure.

Guńka, Piotr A. [Warsaw University of Technology (↗

Realization of high-quality HfO{sub 2} on In{sub 0.53}Ga{sub 0.47}As by in-situ atomic-layer-deposition

High {kappa} dielectric of HfAlO/HfO{sub 2} was an in-situ atomic-layer-deposited directly on molecular beam epitaxy grown In{sub 0.53}Ga{sub 0.47}As surface without using pre-treatments or interfacial passivation layers, where HfAlO (HfO{sub 2}:Al{sub 2}O{sub 3} {approx} 4:1) with high re-crystallization temperature was employed as the top oxide layer. The HfAlO ({approx}4.5 nm)/HfO{sub 2} (0.8 nm)/In{sub 0.53}Ga{sub 0.47}As metal oxide semiconductor capacitors have exhibited an oxide/In{sub 0.53}Ga{sub 0.47}As interface free of arsenic-related defective bonding, thermodynamic stability at 800 deg. C, and low leakage current densities of <10{sup -7} A/cm{sup 2} at {+-}1 MV/cm. The interfacial trap density (D{sub it}) spectra in absence of mid-gap peaks were obtained by temperature-dependent capacitance and conductance with D{sub it}'s of 2-3 x 10{sup 12} eV{sup -1} cm{sup -2} below and 6-12 x 10{sup 11} eV{sup -1} cm{sup -2} above the mid-gap of In{sub 0.53}Ga{sub 0.47}As, respectively. An equivalent oxide thickness of less than 1 nm has been achieved by reducing the HfAlO thickness to {approx}2.7 nm with the same initial HfO{sub 2} thickness of {approx}0.8 nm.

36 MATERIALS SCIENCE↗

Strain analysis of compositionally tailored interfaces in InAs/GaSb superlattices

The effect of interface composition control on interfacial strain distribution in InAs/GaSb superlattices on (100)-GaSb substrates is investigated by atomic resolution scanning transmission electron microscopy. The interface composition was controlled by either depositing InSb at each interface or soaking the GaSb-on-InAs interface under Sb{sub 2} atmosphere. The strain profiles reveal a distinct difference in the extent to which the superlattice strain is balanced using the two methods. In particular, they indicate that the degree of strain balance achievable with soaking is inherently limited by the arsenic surface coverage during GaSb-on-InAs interface formation, emphasizing the influence of V/III flux ratio at this interface. The results also explain observed X-ray diffraction profiles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetism and electronic structures of novel layered CaFeAs{sub 2} and Ca{sub 0.75}(Pr/La){sub 0.25}FeAs{sub 2}

The magnetic and electronic properties of the parent material CaFeAs{sub 2} of new superconductors are investigated using first-principles calculations. We predict that the ground state of CaFeAs{sub 2} is a spin-density-wave (SDW)-type striped antiferromagnet driven by Fermi surface nesting. The magnetic moment around each Fe atom is about 2.1 μ{sub B}. We also present electronic and magnetic structures of electron-doped phase Ca{sub 0.75}(Pr/La){sub 0.25}FeAs{sub 2}, the SDW order was suppressed by La/Pr substitution. The As in arsenic layers is negative monovalent and acts as blocking layers enhancing two-dimensional character by increasing the spacing distance between the FeAs layers. This favors strong antiferromagnetic fluctuations mediated pairing, implying higher T{sub c} in Ca{sub 0.75}(Pr/La){sub 0.25}FeAs{sub 2} than Ca{sub 0.75}(Pr/La){sub 0.25}Fe{sub 2}As{sub 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecular ion sources for low energy semiconductor ion implantation (invited)

Smaller semiconductors require shallow, low energy ion implantation, resulting space charge effects, which reduced beam currents and production rates. To increase production rates, molecular ions are used. Boron and phosphorous (or arsenic) implantation is needed for P-type and N-type semiconductors, respectively. Carborane, which is the most stable molecular boron ion leaves unacceptable carbon residue on extraction grids. A self-cleaning carborane acid compound (C{sub 4}H{sub 12}B{sub 10}O{sub 4}) was synthesized and utilized in the ITEP Bernas ion source resulting in large carborane ion output, without carbon residue. Pure gaseous processes are desired to enable rapid switch among ion species. Molecular phosphorous was generated by introducing phosphine in dissociators via 4PH{sub 3} = P{sub 4} + 6H{sub 2}; generated molecular phosphorous in a pure gaseous process was then injected into the HCEI Calutron-Bernas ion source, from which P{sub 4}{sup +} ion beams were extracted. Results from devices and some additional concepts are described.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Thermophysical properties and conduction mechanisms in As x Se 1-x chalcogenide glasses ranging from x = 0.2 to 0.5

The arsenic (As) to selenium (Se) ratio in As x Se 1-x glasses ranging from x = 0.2 to 0.5 was varied in order to examine the effect of chemical and topological ordering on the glass' thermal transport behavior. The fundamental thermal properties of glass transition temperature (T g ), thermal conductivity (k), and heat capacity (c p ) were experimentally measured using differential scanning calorimetry, transient plane source method, and ultrasonic testing. Based on topological constraint theory, inflections in T g and k were found at the structural coordination number $\langle$r$\rangle$ of 2.4, whereas a slight increase in heat capacity (c p ) with increasing $\langle$r$\rangle$ was observed. A maximum in total thermal conductivity of 0.232 W/m·K was measured for the composition with x = 0.4, which corresponds to the stoichiometric As 2 Se 3 . Gas kinetic theory was used to derive an expression for the photon (k p ) portion of thermal conductivity, which was calculated by measurements of the glass' absorption coefficient (α) and refractive index (n). Models based on Debye theory were then used to derive expressions for specific heat (c v ) and the lattice (k l ) portion of thermal conductivity. The maximum value for k p was 0.173 W/m·K for the composition with x = 0.2, and a minimum value of 0.144 W/m·K was measured for the composition with x = 0.4. Photonic conduction was found to be the dominant carrier mechanisms in all compositions, comprising 60% to 95% of the measured total thermal conductivity.

36 MATERIALS SCIENCE↗

Bi-enhanced N incorporation in GaAsNBi alloys

We have examined the influence of bismuth (Bi) and nitrogen (N) fluxes on N and Bi incorporation during molecular-beam epitaxy of GaAs 1-x-y N x Bi y alloys. The incorporation of Bi is found to be independent of N flux, while the total N incorporation and the fraction of N atoms occupying non-substitutional lattice sites increase with increasing Bi flux. A comparison of channeling nuclear reaction analysis along the [100], [110], and [111] directions with Monte Carlo-Molecular Dynamics simulations indicates that the non-substitutional N primarily incorporate as (N-As) As interstitial complexes. We discuss the influence of Bi adatoms on the formation of arsenic-terminated [110]-oriented step-edges and the resulting enhancement in total N incorporation via the formation of additional (N-As) As .

36 MATERIALS SCIENCE↗

Multi-frequency spin manipulation using rapidly tunable superconducting coplanar waveguide microresonators

In this work, we demonstrate the use of frequency-tunable superconducting NbTiN coplanar waveguide microresonators for multi-frequency pulsed electron spin resonance (ESR) experiments. By applying a bias current to the center pin, the resonance frequency (~7.6 GHz) can be continuously tuned by as much as 95 MHz in 270 ns without a change in the quality factor of 3000 at 2 K. We demonstrate the ESR performance of our resonators by measuring donor spin ensembles in silicon and show that adiabatic pulses can be used to overcome magnetic field inhomogeneities and microwave power limitations due to the applied bias current. We take advantage of the rapid tunability of these resonators to manipulate both phosphorus and arsenic spins in a single pulse sequence, demonstrating pulsed double electron-electron resonance. Our NbTiN resonator design is useful for multi-frequency pulsed ESR and should also have applications in experiments where spin ensembles are used as quantum memories.

42 ENGINEERING↗

Proton radiation resilience of CdSeTe photovoltaics: High predicted end-of-life performance for space applications

Two types of cadmium selenide telluride (CdSeTe) photovoltaic devices have been exposed to high-energy (150–1500 keV) protons with fluences ranging from 1 × 10 11 to 9 × 10 13 cm −2 . Pre- and post-irradiation current density vs voltage characteristic data were collected and analyzed. Arsenic-doped CdSeTe devices retained 80% of the power conversion efficiency (PCE) relative to control devices after exposure to 10 12 cm −2 650 keV protons, while copper-doped CdSeTe devices retained about 95% of the control PCE under the same irradiation condition. Displacement damage dose analysis coupled with simulations for duration-dependent performance in a medium Earth orbit space mission revealed superior PCE remaining factors, indicating greater resilience to proton bombardment than state-of-the-art multijunction III-V based space photovoltaic technologies.

CdTe solar cells↗

Conditions of coherent-phonon excitation in SrMnSb2 films and crystals

Excitation of coherent phonons has the potential to dramatically alter the electronic structure of Dirac and Weyl semimetals, enabling sub-picosecond control of their optical and electronic properties. The Dirac semimetal SrMnSb2 is a candidate for such control, with a coherent-phonon mode that is predicted to close and reopen a gap at the Dirac node. Here, through a series of ultrafast pump-probe experiments, we establish suitable samples and conditions for driving the coherent phonon to high amplitude and attempting to observe the gap’s closure. Films of SrMnSb2 grown by molecular-beam epitaxy are shown to have phononic properties matching those of bulk crystals. We find that the phonon can be strongly excited by pump pulses with wavelength near 1500 nm, which will excite a 30-nm film almost uniformly and will penetrate the arsenic capping layers that protect the films. We find that samples withstand pump pulses of fluence up to 20 mJ/cm2, and we demonstrate the potential for sequences of pulses to amplify the oscillation while suppressing other phonon modes. Armed with our new knowledge of the conditions for exciting the desired coherent phonon, future experiments will be well prepared to measure its motion and to observe phononic control of the Dirac-point gap.

Rai, Manita↗

Spin fluctuations in the 112-type iron-based superconductor Ca 0.82 La 0.18 Fe 0.96 Ni 0.04 As 2

Abstract We report time-of-flight inelastic neutron scattering (INS) investigations on the spin fluctuation spectrum in the 112-type iron-based superconductor (FeSC) Ca 0.82 La 0.18 Fe 0.96 Ni 0.04 As 2 (CaLa-112). In comparison to the 122-type FeSCs with a centrosymmetric tetragonal lattice structure (space group I 4 / m m m ) at room temperature and an in-plane stripe-type antiferromagnetic (AF) order at low temperature, the 112 system has a noncentrosymmetric structure (space group P 2 1 ) with additional zigzag arsenic chains between Ca/La layers and a magnetic ground state with similar wavevector Q A F but different orientations of ordered moments in the parent compounds. Our INS study clearly reveals that the in-plane dispersions and the bandwidth of spin excitations in the superconducting CaLa-112 closely resemble to those in 122 systems. While the total fluctuating moments ⟨ m 2 ⟩ ≈ 4.6 ± 0.2 μ B 2 /Fe are larger than 122 system, the dynamic correlation lengths are similar ( ξ ≈ 10 Å). These results suggest that superconductivity in iron arsenides may have a common magnetic origin under similar magnetic exchange couplings with a dual nature from local moments and itinerant electrons, despite their different magnetic patterns and lattice symmetries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

From legacy contamination to watershed systems science: a review of scientific insights and technologies developed through DOE-supported research in water and energy security

Abstract Water resources, including groundwater and prominent rivers worldwide, are under duress because of excessive contaminant and nutrient loads. To help mitigate this problem, the United States Department of Energy (DOE) has supported research since the late 1980s to improve our fundamental knowledge of processes that could be used to help clean up challenging subsurface problems. Problems of interest have included subsurface radioactive waste, heavy metals, and metalloids (e.g. uranium, mercury, arsenic). Research efforts have provided insights into detailed groundwater biogeochemical process coupling and the resulting geochemical exports of metals and nutrients to surrounding environments. Recently, an increased focus has been placed on constraining the exchanges and fates of carbon and nitrogen within and across bedrock to canopy compartments of a watershed and in river–floodplain settings, because of their important role in driving biogeochemical interactions with contaminants and the potential of increased fluxes under changing precipitation regimes, including extreme events. While reviewing the extensive research that has been conducted at DOE’s representative sites and testbeds (such as the Oyster Site in Virginia, Savannah River Site in South Carolina, Oak Ridge Reservation in Tennessee, Hanford in Washington, Nevada National Security Site in Nevada, Riverton in Wyoming, and Rifle and East River in Colorado), this review paper explores the nature and distribution of contaminants in the surface and shallow subsurface (i.e. the critical zone) and their interactions with carbon and nitrogen dynamics. We also describe state-of-the-art, scale-aware characterization approaches and models developed to predict contaminant fate and transport. The models take advantage of DOE leadership-class high-performance computers and are beginning to incorporate artificial intelligence approaches to tackle the extreme diversity of hydro-biogeochemical processes and measurements. Recognizing that the insights and capability developments are potentially transferable to many other sites, we also explore the scientific implications of these advances and recommend future research directions.

54 ENVIRONMENTAL SCIENCES↗

Accumulation of trace elements in soil and fauna within a site historically contaminated with coal combustion residues

Legacy contaminants tied to energy production are a worldwide concern. Coal combustion residues (CCRs) contain high concentrations of potentially toxic trace elements such as arsenic (As), mercury (Hg), and selenium (Se), which can persist for decades after initial contamination. Coal combustion residue disposal methods, including aquatic settling basins and landfills, can facilitate environmental exposure through intentional and accidental releases. Wildlife exposed to CCRs can experience numerous deleterious effects, such as on development, reproduction, and survival. In the current study, we quantified and compared concentrations of As, Hg, Se, and strontium (Sr) within soils and target fauna (three vertebrate and three invertebrate taxa) from a CCR-contaminated site and a reference site within the U.S. Department of Energy’s Savannah River Site, South Carolina, United States. Our objectives were to (1) compare current concentrations of tested elements in soil and resident fauna to levels from our reference site, (2) assess natural attenuation of elements in soils by comparing current concentrations to historic levels, and (3) evaluate the biomagnification potential of the elements measured via body burden and trophic position correlations among fauna. Here, element concentrations were higher in contaminated soils than reference soils; however, concentrations in 2022 were unchanged from concentrations measured in 2003, suggesting no natural attenuation of tested elements. Additionally, target fauna had elevated As, Se, and Sr levels in comparison to reference samples. A positive correlation was observed in southern toads between Sr concentrations and trophic position, as assessed by nitrogen stable isotope ratios, suggesting potential for biomagnification of Sr within our study system. Collectively, our results demonstrate that legacy contaminants are still present and bioaccumulate in a diversity of taxa in a CCR-contaminated site that has not received effluents in more than 50 years, suggesting monitoring programs in CCR-contaminated sites should be maintained long term in the absence of remediation.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Synchrotron X-rays reveal the modes of Fe binding and trace metal storage in the brown algae Laminaria digitata and Ectocarpus siliculosus

Abstract Iron is accumulated symplastically in kelp in a non-ferritin core that seems to be a general feature of brown algae. Microprobe studies show that Fe binding depends on tissue type. The sea is generally an iron-poor environment and brown algae were recognized in recent years for having a unique, ferritin-free iron storage system. Kelp (Laminaria digitata) and the filamentous brown alga Ectocarpus siliculosus were investigated using X-ray microprobe imaging and nanoprobe X-ray fluorescence tomography to explore the localization of iron, arsenic, strontium, and zinc, and micro-X-ray absorption near-edge structure (μXANES) to study Fe binding. Fe distribution in frozen hydrated environmental samples of both algae shows higher accumulation in the cortex with symplastic subcellular localization. This should be seen in the context of recent ultrastructural insight by cryofixation–freeze substitution that found a new type of cisternae that may have a storage function but differs from the apoplastic Fe accumulation found by conventional chemical fixation. Zn distribution co-localizes with Fe in E. siliculosus, whereas it is chiefly located in the L. digitata medulla, which is similar to As and Sr. Both As and Sr are mostly found at the cell wall of both algae. XANES spectra indicate that Fe in L. digitata is stored in a mineral non-ferritin core, due to the lack of ferritin-encoding genes. We show that the L. digitata cortex contains mostly a ferritin-like mineral, while the meristoderm may include an additional component.

59 BASIC BIOLOGICAL SCIENCES↗

Ferromagnetism in a Semiconductor with Mobile Carriers via Low-Level Nonmagnetic Doping

We show that doped cubic iron pyrite, which is a diamagnetic semiconductor, becomes ferromagnetic when p-type doped. We furthermore find that this material can exhibit high spin polarization both for tunneling and transport devices. These results are based on first-principles electronic structure and transport calculations. This illustrates the use of p-type doping without magnetic impurities as a strategy for obtaining ferromagnetic semiconducting behavior, with implications for spintronic applications that require both magnetic ordering and good mobility. This is a combination that has been difficult to achieve by doping semiconductors with magnetic impurities. We show that phosphorus and arsenic may be effective dopants for achieving this behavior.

36 MATERIALS SCIENCE↗

Coupling of fully symmetric As phonon to magnetism in Ba(Fe 1-x Au x ) 2 As 2

In this work, we study the coupling of the fully symmetric vibration mode of arsenic atoms to magnetism in a Ba ( Fe 1 - x Au x ) 2 As 2 system by polarization-resolved Raman spectroscopy and neutron diffraction. In this system, there are two phase transitions: a tetragonal-to-orthorhombic structural phase transition at temperature T S and a magnetic phase transition into collinear spin-density wave (SDW) state at temperature T N ( ≤ T S ). T S and T N almost coincide in the pristine compound, whereas they differ by as much as 8 K for compounds with dilute gold substitution for iron. Raman coupling to the A g (As) phonon is forbidden for the X Y scattering geometry in the tetragonal phase above T S , whereas it becomes allowed in the orthorhombic phase below T S : The emerging mode's intensity indicates the lattice orthorhombicity. Furthermore, we find that upon cooling below T S , first, weak A g (As) phonon mode intensity appears in the X Y scattering geometry spectra; however, the mode's intensity is significantly enhanced in the magnetic phase below T N . The A g (As) phonon also shows an asymmetric line shape below T N and an anomalous linewidth broadening upon Au doping. We describe the anomalous behavior of the A g (As) mode in the X Y scattering geometry using a Fano model involving the A g (As) phonon interacting with the B 2 g ( D 4 h )-symmetry-like electron-hole continuum. We conclude that the temperature dependence of light coupling amplitude to the A g (As) phonon follows the evolution of the magnetic order parameter M ( T ) . We propose that the intensity enhancement of the A g (As) phonon in the X Y scattering geometry below T N is due to electronic anisotropy induced by the collinear SDW order parameter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chemical tuning of a honeycomb magnet through a critical point

BaCo 2⁢ (AsO 4 )⁢ 2 (BCAO) has seen extensive study since its initial identification as a proximate Kitaev quantum spin liquid candidate. Thought to be described by the highly anisotropic XXZ-J 1 -J 3 model, the ease with which magnetic order is suppressed in the system indicates proximity to a spin liquid phase. Upon chemical tuning via partial arsenic substitution with vanadium, we show an initial suppression of long-range incommensurate order in the BCAO system to T ≈ 3.0 K, followed by increased spin freezing at higher substitution levels. Between these two regions, at around 10% substitution, the system is shown to pass through a critical point where the competing J 1 /J 3 exchange interactions become more balanced, producing a more complex magnetic ground state, likely stabilized by quantum fluctuations. Here, this state shows how slight compositional change in magnetically frustrated systems may be leveraged to tune ground state degeneracies and potentially realize a quantum spin liquid state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magneto-optical response of the magnetic semiconductors EUCd 2 X 2 (X = P, As, SB)

n this study, we identify EuCd 2 X 2 (for X = P, As, Sb) as a series of magnetic semiconductors. We examine how the band gap of the series responds to X changing from phosphorus (P), to arsenic (As), and finally antimony (Sb). We characterize the samples using electronic transport and magnetization measurements. Based on infrared spectroscopy, we find that the band gap reduces progressively from 1.23 eV in EuCd 2 P 2 , to 0.77 eV in EuCd 2 As 2 , and finally 0.52 eV in EuCd 2 Sb 2 . In a magnetic field, all three systems show a strong response and their band gaps decrease at 4 K. This decrease is non-monotonic as we change X. It is strongest in the phosphorous compound and weakest in the antimony compound. For all the three compositions, EuCd 2 X 2 remains a semiconductor up to the highest magnetic field applied (16 T).

36 MATERIALS SCIENCE↗