Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ANTIMONY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

First principle prediction of half-metallic ferromagnetism above room temperature in half-heusler alloys

A first principle study of half-metallicity and ferromagnetism in half-heusler alloys NiMnZ (Z = Si, P, Ge, As, and Sb) is given. The half-metallicity and ferromagnetism are predicted via the calculation of electronic structure, and Curie temperature. The stability of the orthorhombic and tetragonal structures and C1{sub b} at various values of lattice parameters is also studied by means of the pseudo-potential method. All alloys exhibit the half-metallicity and ferromagnetism above room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly tensile-strained, type-II, Ga{sub 1-x}In{sub x}As/GaSb quantum wells

We have investigated the properties of highly tensile-strained (Ga,In)As layers in a GaSb matrix. In situ observations of the growth mode suggest the formation of (Ga,In)As quantum dots. In contrast, ex situ transmission electron microscopy evidences the formation of perfect quantum wells with the presence of a (Ga,In)Sb interfacial layer. This is analyzed taking into account the surfactant behavior of Sb and stabilization of the system by reduction of the overall strain. Photoluminescence is observed up to 3.0 mum at room temperature, in good agreement with calculations assuming a type-II band alignment and including the (Ga,In)Sb interfacial layer.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High Pressure IR Studies of Correlated Electron Materials at SPring-8

The highly bright infrared (IR) synchrotron radiation from SPring-8 offers various research opportunities, including high pressure IR studies of correlated electron materials using a diamond anvil cell. We present our recent results on the reflectivity studies of an f electron compound CeRu{sub 4}Sb{sub 12}, at high pressure up to 8 GPa and at low temperature down to 40 K, measured in both far- and mid-IR ranges.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermoelectric properties of electrically stressed Sb/Bi-Sb-Te multilayered films

Electrically stressed Bi-Sb-Te thin films have demonstrated markedly enhanced Hall mobility and moderately reduced carrier concentration. To lower electrical resistivity further, a Sb-inserted Bi-Sb-Te multilayer structure was prepared through consecutively sputtering Bi-Sb-Te and Sb layers followed by electric current stressing. The electrically stressed Sb/Bi-Sb-Te film demonstrates high carrier concentration and enhanced Hall mobility. We propose that the additional Sb supply suppresses electromigration-induced Sb depletion in crystal lattices, thus maintains high carrier concentration of the Bi-Sb-Te film. The presented approach provides a simple means to optimize thermoelectric properties of Bi-Sb-Te films.

36 MATERIALS SCIENCE↗

Zintl phase Yb{sub 1-x}Ca{sub x}Cd{sub 2}Sb{sub 2} with tunable thermoelectric properties induced by cation substitution

It has been shown previously that the thermoelectric properties of the Zintl phase compound YbCd{sub 2}Sb{sub 2} can be finely tuned via Zn substitution at the Cd-site in the anionic (Cd{sub 2}Sb{sub 2}){sup 2-} framework. Here we report the results of the investigation of isoelectronic substitution of Yb by Ca. The p-type Yb{sub 1-x}Ca{sub x}Cd{sub 2}Sb{sub 2} (0.2{<=}x{<=}0.8) samples have been synthesized via a solid-state reaction followed by suitable cooling, annealing, grinding, and spark plasma sintering densification processes. In samples with x=0.2, 0.4, 0.5, 0.6, 0.8, the electrical conductivity, Seebeck coefficient, and thermal conductivity measurements have been carried out in the temperature range from 300 to 650 K. It is found that the Ca substitution effectively lowers the thermal conductivity for all samples at high temperature, while it significantly increases the Seebeck coefficient. As a result, the dimensionless figure of merit ZT of 0.96 has been attained at 650 K for samples with x=0.4, while the value is 0.78 for the unsubstituted YbCd{sub 2}Sb{sub 2}

36 MATERIALS SCIENCE↗

Ultrasmall particle detection using a submicron Hall sensor

We demonstrate detection of a single FePt nanoparticle (diameter 150 nm, moment {approx}10{sup 7} {mu}{sub B}) using an ultrasensitive InSb Hall sensor with the bar lateral width of 600 nm. The white noise of a typical nanodevice, S{sub V}{sup 1/2{approx_equal}}28 nV/{radical}Hz, is limited only by two-terminal resistance of the voltage leads which results in a minimum field sensitivity of the device B{sub min}=0.87 {mu}T/{radical}Hz. To detect a single FePt bead, we employed a phase-sensitive method based on measuring the ac susceptibility change in a bead when exposed to a switched dc magnetic field. Such nano-Hall devices, enabling detection of potentially even smaller moments, are of considerable significance both for nanomagnetic metrology and high sensitivity biological and environmental detectors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Irreversible altering of crystalline phase of phase-change Ge-Sb thin films

The stability of the crystalline phase of binary phase-change Ge{sub x}Sb{sub 1-x} films is investigated over a wide range of Ge content. From Raman spectroscopy we find the Ge-Sb crystalline structure irreversibly altered after exposure to a laser beam. We show that with increasing beam intensity/temperature Ge agglomerates and precipitates out in the amount growing with x. A simple empirical relation links Ge precipitation temperature T{sub Ge}{sup p} to the rate of change dT{sub cryst}/dx of crystallization, with the precipitation easiest on the mid-range x plateau, where T{sub cryst} is nearly constant. Our findings point to a preferable 15% < or approx. x < 50% window, that may achieve the desired cycling/archival properties of a phase-change cell.

36 MATERIALS SCIENCE↗

Gold-free GaAs/GaAsSb heterostructure nanowires grown on silicon

Growth of GaAs/GaAsSb heterostructure nanowires on silicon without the need for gold seed particles is presented. A high vertical yield of GaAs nanowires is first obtained, and then GaAs{sub x}Sb{sub 1-x} segments are successfully grown axially in these nanowires. GaAsSb can also be integrated as a shell around the GaAs core. Finally, two GaAsSb segments are grown inside a GaAs nanowire and passivated using an Al{sub x}Ga{sub 1-x}As shell. It is found that no stacking faults or twin planes occur in the GaAsSb segments.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Epitaxial growth and ferrimagnetic properties of Mn film on GaSb(100)

We report on the epitaxial stabilization and magnetic properties of Mn films on GaSb(100) using molecular beam epitaxy, a follow-up to our previous work on the growth of Mn films on GaAs(100) [Phys. Rev. B 79, 045309 (2009)]. A strong ferrimagnetic ordering was observed which was attributed to the largely expanded lattice parameter resulting from the lattice mismatch with substrate and the enhanced thermal energy with increasing growth temperature. The observed magnetic moment of 1.16{mu}{sub B}/Mn atom was several times larger than that observed in the Mn/GaAs(100) films due to the lattice constant difference of substrates. The in-plane magnetoresistance behavior demonstrated the magnetic anisotropy that might result from the slightly distorted cubic structure of {alpha}-Mn phase under low-dimensional growth.

36 MATERIALS SCIENCE↗

Direct observations of Ge{sub 2}Sb{sub 2}Te{sub 5} recording marks in the phase-change disk

Atomistic structures of the Ge{sub 2}Sb{sub 2}Te{sub 5} thin film in the real phase-change disk have been investigated using transmission electron microscopy (TEM). As-deposited amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} films were laser-irradiated for initialization (crystallization) and recording. Cross-sectional TEM observations revealed that the recording mark was fully amorphized by laser irradiation. A slight difference between the as-deposited and the laser irradiation-induced amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} was observed in the intensity profile of nanobeam electron diffraction patterns and atomic pair distribution functions. This difference was attributed to structural relaxation of amorphous Ge{sub 2}Sb{sub 2}Te{sub 5}, which gives rise to the alteration of chemical order.

36 MATERIALS SCIENCE↗

Atomic structure of amorphous and crystallized Ge{sub 15}Sb{sub 85}

Ge{sub 15}Sb{sub 85} is a promising material for phase-change memory applications owing to its very short crystallization times. As deposited amorphous samples of sputter deposited Ge{sub 15}Sb{sub 85} have been investigated by extended x-ray absorption fine structure (EXAFS) measurements on both, Sb and Ge K absorption edges. After crystallizing the specimen, x-ray diffraction (XRD) and EXAFS measurements have been performed to analyze the atomic structure at different annealing conditions. Thus, experimental techniques focusing on the long range order as well as on the local order have been combined. Sb atoms have on average 3.2(2) nearest neighbors, while Ge atoms have 4.0(3). The Ge-Ge and Ge-Sb bond lengths are determined to 2.46(2) and 2.66(1) A, respectively and agree well with those observed in the amorphous phase of the common phase-change material Ge{sub 2}Sb{sub 2}Te{sub 5}. After crystallizing the sample at 250 deg. C, very different EXAFS spectra with modified Ge-Sb bond lengths are observed. The higher concentration of Ge neighbors at the Ge edge as compared to the as-deposited sample is indicative for phase separation. For the corresponding sample, XRD does not show reflections of Ge, which indicates that the agglomeration of Ge is amorphous or below the coherence length of the x-radiation. The EXAFS spectrum shows a superposition of two phases: one with bond lengths which agree with sp{sup 3}-hybridized Ge [2.43(1) A] and another one with longer Ge-Ge bond lengths [2.79(8) A]. This result can be explained by phase separation in the material.

36 MATERIALS SCIENCE↗

A thermodynamic analysis of native point defect and dopant solubilities in zinc-blende III-V semiconductors

A thermodynamic model is used to analyze available experimental data relevant to point defects in the binary zinc-blende III-V compounds (Ga,In)-(P,As,Sb). The important point defects and their complexes in each of the materials are identified and included in the model. Essentially all of the available experimental data on dopant solubility, crystal density, and lattice parameter of melt and solution grown crystals and epilayers are reproduced by the model. It extends an earlier study [Hurle, J. Appl. Phys. 85, 6957 (1999)] devoted solely to GaAs. Values for the enthalpy and entropy of formation of both native and dopant related point defects are obtained by fitting to experimental data. In undoped material, vacancies, and interstitials on the Group V sublattice dominate in the vicinity of the melting point (MP) in both the phosphides and arsenides, whereas, in the antimonides, vacancies on both sublattices dominate. The calculated concentrations of the native point defects are used to construct the solidus curves of all the compounds. The charged native point defect concentrations at the MP in four of the six materials are significantly higher than their intrinsic carrier concentrations. Thus the usually assumed high temperature 'intrinsic' electroneutrality condition for undoped material (n=p) is not valid for these materials. In GaSb, the Ga{sub Sb} antisite defect appears to be grown-in from the melt. This contrasts with the As{sub Ga} defect in GaAs for which the concentration grown-in at the MP is negligibly small. Compensation of donor-doped material by donor-Group III vacancy complexes is shown to exist in all the compounds except InP where Group VI doped crystals are uncompensated and in InSb where there is a lack of experimental data. The annealing effects in n{sup +} GaAs, including lattice superdilation, which were shown in the earlier paper to be due to Group III vacancy undersaturation during cooling, are found to be present also in GaSb and InAs. Results for native point defects are compared with reported ''first principles'' calculations for GaAs. It is seen that, while there is some accord with experimental findings for low temperature molecular beam epitaxial (MBE) growth, they fail totally to predict the behavior under high temperature growth conditions. The analysis of data on liquid phase epitaxy (LPE) growth of GaAs from Bi solution in the earlier paper has been re-calculated in the light of experimental data that showed that the model used in that paper to represent the Ga-As-Bi phase equilibria was inadequate. An improved model reveals that Ga vacancies exert a greater effect in controlling the extent of the linear range of donor dopant solubility than previously predicted. It has also led to a re-evaluation of the equilibrium EL2 and Ga vacancy concentrations in GaAs during MBE growth under As-rich conditions at low temperatures ({approx}500 K). The amended model predicts that the very high concentrations of EL2 and of Ga vacancies observed experimentally are near equilibrium values. The predicted increase in the equilibrium concentrations of these defects at low temperatures results from coulombic attraction between the two defects. At temperatures somewhat lower than 500 K the rate of increase becomes catastrophic.

36 MATERIALS SCIENCE↗

Gold Provenance Studies for Romanian Archaeological Objects Using Micro-SR-XRF

Studies by Synchrotron Radiation--X-Ray Fluorescence (SR-XRF) for the search of the presence of trace elements like Sb, Sn, Te and Pb in archaeological metallic objects found on the territory of Romania--old coins and Bronze Age jewelry, aimed to determine the provenance of the gold used in their manufacture. The results are compared with the detailed elemental composition of alluvial or primary gold samples, obtained by the same technique. This work attempted to establish the origin of the gold used for the mint of two different types of koson coins. We found that the kosons with monogram are made of refined gold, while the one used for the kosons without monogram is mainly alluvial. The gold used in the manufacture of the Calarasi Vulchitrun-type disk and the Tauteu hair ring is also of alluvial origin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preliminary Commissioning and Performance of the Soft X-ray Micro-characterization Beamline at the Canadian Light Source

The Soft X-ray Micro-characterization Beamline (SXRMB) is a medium energy, bending magnet based beamline, designed to cover an energy range of 1.7-10 keV using two sets of crystals--InSb(111) and Si(111). The design goal is to deliver a flux of 2x10{sup 11} photons sec{sup -1}/100 mA with a resolution up to 10,000 for X-ray Absorption Spectroscopy. A KB mirror stage is designed to provide microprobe capability, with a spot size of 10x10 {mu}m{sup 2} and a flux of >10{sup 9} at the microprobe station. The beamline has been in the commissioning phase since 2008, and access to the X-ray absorption endstation is now open to general users. The optical commissioning and performance of the beamline is presented with some early experimental results.

43 PARTICLE ACCELERATORS↗

Ab initio calculations and synthesis of the off-stoichiometric half-Heusler phase Ni{sub 1-x}Mn{sub 1+x}Sb

We perform a combined theoretical and experimental study of the phase stability and magnetism of the off-stoichiometric Ni{sub 1-x}Mn{sub 1+x}Sb in the half-Heusler crystal phase. Our work is motivated by the need for strategies to engineer the magnetism of potentially half-metallic materials, such as NiMnSb, for improved performance at elevated temperatures. By means of ab initio calculations we investigate Ni{sub 1-x}Mn{sub 1+x}Sb over the whole composition range 0{<=}x{<=}1 of Ni replacing Mn and show that at relevant temperatures, the half-Heusler phase should be thermodynamically stable up to at least x=0.20 with respect to the competing C38 structure of Mn{sub 2}Sb. Furthermore we find that half-Heusler Ni{sub 1-x}Mn{sub 1+x}Sb retains half-metallic band structure over the whole concentration range and that the magnetic moments of substitutional Mn{sub Ni} atoms display magnetic exchange interactions an order of magnitude larger than the Ni-Mn interaction in NiMnSb. We also demonstrate experimentally that the alloys indeed can be created by synthesizing off-stoichiometric Ni{sub 1-x}Mn{sub 1+x}Sb films on MgO substrates by means of magnetron sputtering.

36 MATERIALS SCIENCE↗

Low frequency noise in InSb/GaAs and InSb/Si channels

The low frequency noise features of InSb grown on GaAs and Si substrates using molecular-beam epitaxy are investigated in the temperature range from 80 to 300 K. In all samples the flicker noise dominates the spectra, with Hooge factors as low as 2x10{sup -5} and 9x10{sup -5} for InSb on GaAs and Si, respectively. The temperature dependence of the Hooge factors is investigated.

36 MATERIALS SCIENCE↗

The origin of the resistance change in GeSbTe films

Amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} (a-GST) films were deposited by ion beam sputtering deposition. Extended x-ray absorption fine structure (EXAFS) data confirmed the existence of the Ge-Ge homopolar bonds in the films. Raman spectra also indicated that the Ge tetrahedral coordination in the a-GST film disappeared after an annealing treatment above 220 deg. C. Resonantly excited Ge L{sub 2,3} x-ray emission spectra (which probe occupied Ge 3d4s-electronic states) show that the phase change from the amorphous to crystalline state is accompanied by a reduction in the Ge I(L{sub 2})/I(L{sub 3}) intensity ratio due to a L{sub 2}L{sub 3}N Coster-Kronig transition, indicating that the number of carriers is increased in the Ge 4sp valence state. These findings constitute direct evidence for the contribution of the Ge electronic states to the resistivity change.

36 MATERIALS SCIENCE↗

2-3 {mu}m mid infrared light sources using InGaAs/GaAsSb ''W'' type quantum wells on InP substrates

We have investigated the InGaAs/GaAsSb/InAlGaAs/InAlAs type-II ''W'' quantum wells (QWs) grown on InP substrates by molecular beam epitaxy. The photoluminescence (PL) emission wavelength longer than 2.56 {mu}m at room temperature (RT) is demonstrated for the first time in this material system. The PL emission peaks of our designed samples can cover a wide range from 2 to 2.5 {mu}m at cryogenic temperature. The samples show good optical quality that the reduction in integrated PL intensity is only around one order of magnitude from 35 K to RT. We found that the integrated PL intensity decreased as the emission wavelength increased, which is due to the reduction in the electron-hole wave function overlap. This is consistent with the calculated result. In the power dependent PL measurements, the emission peak of ''W'' type QWs show blue shifts with the excitation power (P{sub ex}) but does not follow the P{sub ex}{sup 1/3} rule as predicted by type-II band bending model. The localized states filling effect gives reasonable explanations for the observed phenomena.

36 MATERIALS SCIENCE↗