Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

AGS tune jump system to cross horizontal depolarization resonances overview

Two partial snakes overcome the vertical depolarizing resonances in the AGS. But a new type of depolarizing intrinsic resonance from horizontal motion appeared. We reduce these using horizontal tune jumps timed to these resonances. We gain a factor of six in crossing rate with a tune jump of 0.05 in 100 {micro}s. Two quadrapoles, we described in 2009, pulse 42 times, the current matching beam energy. The power supplies for these quads are described in detail elsewhere in this conference. The controls for the Jump Quad system is based on a BNL designed Quad Function Generator. Two modules are used; one for timing, and one to supply reference voltages. Synchronization is provided by a proprietary serial bus, the Event Link. The AgsTuneJump application predicts the times of the resonances during the AGS cycle and calculates the power supply trigger times from externally collected tune and energy versus time data and the Low and High PS voltage functions from a voltage to current model of the power supply. The system was commissioned during runs 09 & 10 and is operational. Many beam effects are described elsewhere. The TuneJump system has worked well and has caused little trouble save for the perturbations in the lattice having such a large effect due to our need to run with the vertical tune within a few thousandths of the integer tune. As these problems were mostly sorted out by correcting the 6th harmonic orbit distortions which caused a large 18 theta beta wave. Also running with minimal chromaticity reduces emittance growth. There are still small beta waves which are being addressed. The timing of the pulses is still being investigated, but as each crossing causes minimal polarization loss, this is a lengthy process.

43 PARTICLE ACCELERATORS↗

Seeded growth of robust SERS-active 2D Au@Ag nanoparticulate films

We demonstrate herein a novel and versatile solution-based methodology for fabricating self-organized two-dimensional (2D) Au nanoparticle arrays on glass using in situ nucleation at an aminosilane monolayer followed by seeded, electroless growth; subsequent deposition of Ag produced Au{at}Ag core-shell nanoparticulate films which proved highly promising as surface-enhanced Raman scattering (SERS) platforms.

36 MATERIALS SCIENCE↗

Reactivity of Transition Metals (Pd, Pt, Cu, Ag, Au) toward Molecular Hydrogen Dissociation: Extended Surfaces versus Particles Supported on TiC(001) or Small Is Not Always Better and Large Is Not Always Bad

The reactivity of Pd{sub 4}, Pt{sub 4}, Cu{sub 4}, Ag{sub 4}, and Au{sub 4} clusters supported on TiC(001) toward molecular hydrogen dissociation has been studied by means of density functional based theory and periodic models and compared to that of the (111) and (001) surfaces. Pd{sub 4} and Pt{sub 4} interact rather strongly with the TiC(001) substrate, but the interaction of molecular hydrogen with the Pd{sub 4}/TiC and Pt{sub 4}/TiC systems is also very strong. As a consequence of the substantial admetal {leftrightarrow} carbide interactions, the adsorbed H{sub 2} molecule becomes more difficult to dissociate than on the corresponding extended (111) and (001) surfaces. Here, having a small supported particle does not lead to an enhanced chemical activity. On the contrary, for the Cu{sub 4}/TiC, Ag{sub 4}/TiC, and Au{sub 4}/TiC systems the combination of the small size of the particle and the polarization induced by the underlying carbide facilitates the dissociation of the hydrogen molecule with respect to the case of the extended surfaces. Here, the reduced size effectively enhances the activity of the supported particle. Thus, our results for the M(111), M(100), and M{sub 4}/TiC(001) systems show the complex interplay that can take place among the nature of the admetal, particle size effects, and support interactions.

08 HYDROGEN↗

Reactivity of Transition Metals (Pd Pt Cu Ag Au) toward Molecular Hydrogen Dissociation: Extended Surfaces versus Particles Supported on TiC(001) or Small Is Not Always Better and Large Is Not Always Bad

The reactivity of Pd{sub 4}, Pt{sub 4}, Cu{sub 4}, Ag{sub 4}, and Au{sub 4} clusters supported on TiC(001) toward molecular hydrogen dissociation has been studied by means of density functional based theory and periodic models and compared to that of the (111) and (001) surfaces. Pd{sub 4} and Pt{sub 4} interact rather strongly with the TiC(001) substrate, but the interaction of molecular hydrogen with the Pd{sub 4}/TiC and Pt{sub 4}/TiC systems is also very strong. As a consequence of the substantial admetal {leftrightarrow} carbide interactions, the adsorbed H{sub 2} molecule becomes more difficult to dissociate than on the corresponding extended (111) and (001) surfaces. Here, having a small supported particle does not lead to an enhanced chemical activity. On the contrary, for the Cu{sub 4}/TiC, Ag{sub 4}/TiC, and Au{sub 4}/TiC systems the combination of the small size of the particle and the polarization induced by the underlying carbide facilitates the dissociation of the hydrogen molecule with respect to the case of the extended surfaces. Here, the reduced size effectively enhances the activity of the supported particle. Thus, our results for the M(111), M(100), and M{sub 4}/TiC(001) systems show the complex interplay that can take place among the nature of the admetal, particle size effects, and support interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High Ms Fe16N2 thin film with Ag under layer on GaAs substrate

(001) textured Fe16N2 thin film with Ag under layer is successfully grown on GaAs substrate using a facing target sputtering (FTS) system. After post annealing, chemically ordered Fe16N2 phase is formed and detected by X-ray diffraction (XRD). High saturation magnetization (Ms) is measured by a vibrating sample magnetometer (VSM). In comparison with Fe16N2 with Ag under layer on MgO substrate and Fe16N2 with Fe under layer on GaAs substrate, the current layer structure shows a higher Ms value, with a magnetically softer feature in contrast to the above cases. In addition, X-ray photoelectron spectroscopy (XPS) is performed to characterize the binding energy of N atoms. To verify the role of strain that the FeN layer experiences in the above three structures, Grazing Incidence X-ray Diffraction (GIXRD) is conducted to reveal a large in-plane lattice constant due to the in-plane biaxial tensile strain. INTRODUCTION

Allard, Jr, Lawrence Frederick↗

Preparation and characterization of Ag-doped BaTiO{sub 3} based X7R ceramics

Ag-doped BaTiO{sub 3} based X7R (temperature coefficient of capacitance within the range of {+-}15% between -55 and +125 deg. C) ceramics with different amounts of silver (0.0-20.0 mol%) were prepared in this paper. The X-ray diffraction analysis indicated that no phases other than BaTiO{sub 3} and silver were observed in the ceramics. The energy dispersive X-ray spectroscopy analysis showed that the silver particles presented homogeneous distribution in the BaTiO{sub 3} ceramics. The dielectric properties of Ag-doped ceramics were investigated. A small amount of silver (<0.5 mol%) and a large amount of silver (>2.0 mol%) could both improve the sintered density and permittivity, but more content of silver (0.5-2.0 mol%) would decrease the relative density and permittivity. Specially, the temperature coefficient of capacitors of the ceramics doped with 20 mol% silver still met the X7R characteristics, and the room temperature permittivity of the ceramics was 6823, which was the highest dielectric constant in the BaTiO{sub 3} based X7R ceramics.

36 MATERIALS SCIENCE↗

Results from Evaluation of Proposed ASME AG-1 Section FI Metal Media Filters - 13063

High efficiency particulate air (HEPA) filtration technology is commonly used in Department of Energy (DOE) facilities that require control of radioactive particulate matter (PM) emissions due to treatment or management of radioactive materials. Although HEPA technology typically makes use of glass fiber media, metal and ceramic media filters are also capable of filtering efficiencies beyond the required 99.97%. Sintered metal fiber filters are good candidates for use in DOE facilities due to their resistance to corrosive environments and resilience at high temperature and elevated levels of relative humidity. Their strength can protect them from high differential pressure or pressure spikes and allow for back pulse cleaning, extending filter lifetime. Use of these filters has the potential to reduce the cost of filtration in DOE facilities due to life cycle cost savings. ASME AG-1 section FI has not been approved due to a lack of protocols and performance criteria for qualifying section FI filters. The Institute for Clean Energy Technology (ICET) with the aid of the FI project team has developed a Section FI test stand and test plan capable of assisting in the qualification ASME AG-1 section FI filters. Testing done at ICET using the FI test stand evaluates resistance to rated air flow, test aerosol penetration and resistance to heated air of the section FI filters. Data collected during this testing consists of temperature, relative humidity, differential pressure, flow rate, upstream particle concentration, and downstream particle concentration. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Co-adsorption of I{sub 2} and H{sub 2}O on Ag{sup 0}Z and Kinetics of Iodine Silver Reaction

Co-adsorption of iodine and water by reduced silver-exchanged mordenite (Ag{sup 0}Z) is studied to support the development of multi-component adsorption models for the separation and recovery of radio isotopic gases in off-gas streams in nuclear fuel reprocessing. Single-component adsorption equilibrium data of iodine and water were obtained to determine the saturation capacity and evaluate the parameters of the generalized statistical thermodynamic adsorption (GSTA) model being developed for modeling of co-adsorption. Co-adsorption data acquisition is in progress for model validation. Kinetic data were obtained to determine the intra-particle mass transfer and reaction parameters for the adsorption models. In addition, work is in progress to obtain data of the iodine-silver reaction at various conditions to study the reaction kinetics, which will provide insight to the chemisorption process of iodine on Ag{sup 0}Z. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Performance Evaluation of AG-1 FC HEPA Filters and Medium in Nuclear Complex Facilities - 20434

High Efficiency Particulate Air (HEPA) filters are credited as the final barrier against the release of radioactive aerosol contamination in nearly every operating U. S. Department of Energy (DOE) and National Nuclear Security Agency (NNSA) nuclear facility. The Institute for Clean Energy Technology (ICET) at Mississippi State University maintains a research program that studies various aspects of these components of containment systems and seeks to answer key questions from across the industry. This programmatic overview will include results from recent and ongoing studies, including a study on filter design and performance envelope, degradation due to aging or fatigue, fire event impact on HEPA filters, and accelerated aging of medium and component parts. ICET has completed a study helping to define the threshold for combined elevated temperature and relative humidity resistance of separator style and separator-less style HEPA filters that are used in DOE complexes. The study provides experimental data that considers elevated temperature, elevated relative humidity (RH), and target differential pressure (dP) in an attempt to gain a better understanding or more comprehensive insight into the operating envelope of different configurations of ASME (American Society for Mechanical Engineers) AG-1 Section FC filters. Test variables including air temperature ranges of 48.88 deg. C, 54.44 deg. C, or 60 deg. C (120, 130, or 140 deg. F); air RH ranges including 60-70%, 80%, or 90+% with initial filter dP of either 497.68 Pa, 746.52 Pa, or 995.36 Pa (2 inches water column (in. w. c.), 3 in. w. c., or 4 in. w. c.) included for full bracketing of each set of conditions. A study examining the effects of aging and fatigue on nuclear grade HEPA filters and medium elucidates the physical properties of media along with testing of new and aged ASME AG-1 HEPA filters. In addition to performing autopsies of the tested, aged filters to help better understand the service life of their performance, newly designed accelerated aging chambers allow new medium to undergo accelerated aging and exposure treatments. Evaluation of degradation in physical properties and functionality requires a high population of aged filters of different ages, designs, manufacturers, and operational histories. The limited availability of this population and the impropriety of looking solely at formulations and components from past years requires experimental design that will provide foresight into future filter performance. This undertaking therefore involves not only properties analysis of aged medium from different operational histories, ages, designs, and manufacturers, but also prescience in analytical goals via accelerated aging studies of newly manufactured media. A more complete understanding of the mechanisms of degradation from past formulations as well as current and future formulations is possible. Accelerated Aging of newly manufactured media utilizes exposure treatments based on the Arrhenius equation to artificially age medium and therefore glimpse into the future. Evaluation of current media properties This testing allows for the comparison of performance and durability of new filters under upset or design basis conditions with aged filters that were in service under ambient conditions and other aged filters retained in storage. Susceptibility of HEPA filters to the effects of combustion byproducts, heat, and water is also being studied in an attempt to gain understanding on the prevention of filter failures during fire events in nuclear facilities. ICET seeks to determine the effect of filter performance due to smoke loading using characterized smoke from variable fuel compositions, geometries, and loads; the smoke capacity of various filters with different burning conditions, heat release rates and transport, as well as mass transport from the air stream will be studied in low flow containment systems. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Injection and acceleration of Au31+ in the BNL AGS.

Injection and acceleration of ions in a lower charge state reduces space charge effects, and, if further elcctron stripping is needed, may allow elimination of a stripping stage and the associated beam losses. The former is of interest to the accelerators in the GSI FAIR complex, the latter for BNL RHIC collider operation at energies lower than the current injection energy. Lower charge state ions, however, have a higher likelihood of electron stripping which can lead to dynamic pressures rises and subsequent beam losses. We report on experiments in the AGS where Au{sup 31+} ions were injected and accelerated instead of the normally used Au{sup 77+} ions. Beam intensities and the average pressure in the AGS ring are recorded, and compared with calculations for dynamic pressures and beam losses. The experimental results will be used to benchmark the StrahlSim dynamic vacuum code and will be incorporated in the GSI FAIR SIS100 design.

43 PARTICLE ACCELERATORS↗

p-Carbon CNI polarimetry in the AGS and RHIC.

Proton polarization measurements in the AGS (Alternate Gradient Synchrotron) and RHIC (Relativistic Heavy Ion Collider) are based on proton-carbon(pC) and proton-proton elastic scattering in the Coulomb Nuclear Interference (CNI) region. The CNI polarimeters are the essential tools for polarized proton acceleration setup and operation. High intensity recoil nuclei from the scattering of the circulating proton beam in the thin carbon target is efficiently utilized in the silicon strip detectors and data acquisition system, which is capable to analyze the event rate up to a few millions/second. This makes it possible for the fast, practically non-destructive polarization measurements. The polarization measurement on the beam energy ramp was implemented in AGS and RHIC, providing locations of polarization losses. Polarimeter operation in the scanning mode also gives polarization profile and beam profile (including bunch by bunch values for the later one). This paper summarizes the recent modifications. Results of polarization measurements are also discussed.

43 PARTICLE ACCELERATORS↗

Structure and Growth of Height-Selected Ag Islands on Fivefold i-AlPdMn Quasicrystalline Surfaces: STM Analysis and Step Dynamics Modeling

The development and local structure of height-selected 3-layer Ag islands on fivefold surfaces of icosahedral Al-Pd-Mn quasicrystals is characterized by STM for Ag deposition at 365 K. Heterogeneous nucleation of pseudomorphic single layer high islands is followed by rapid formation of 2nd and 3rd layers and subsequent lateral spreading, where each of these 3 layers consists of a family of nonfcc structures. The behavior is elucidated by step dynamics modeling incorporating strain buildup for larger islands, enhanced binding in higher layers, and height selection due to quantum size effects.

36 MATERIALS SCIENCE↗

Materials Data on Ag(H7O4)2 by Materials Project

AgH12O7H2O crystallizes in the monoclinic P2_1/c space group. The structure is one-dimensional and consists of four water molecules and two AgH12O7 ribbons oriented in the (1, 0, 0) direction. In each AgH12O7 ribbon, Ag2+ is bonded to six O2- atoms to form distorted edge-sharing AgO6 octahedra. There are a spread of Ag–O bond distances ranging from 2.13–2.63 Å. There are twelve inequivalent H1+ sites. In the first H1+ site, H1+ is bonded in a linear geometry to two O2- atoms. There is one shorter (1.06 Å) and one longer (1.47 Å) H–O bond length. In the second H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. In the third H1+ site, H1+ is bonded in a linear geometry to two O2- atoms. There is one shorter (1.05 Å) and one longer (1.55 Å) H–O bond length. In the fourth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 1.01 Å. In the fifth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the sixth H1+ site, H1+ is bonded in a distorted linear geometry to two O2- atoms. There is one shorter (1.03 Å) and one longer (1.59 Å) H–O bond length. In the seventh H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the eighth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 1.01 Å. In the ninth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the tenth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the eleventh H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 1.01 Å. In the twelfth H1+ site, H1+ is bonded in a linear geometry to two O2- atoms. There is one shorter (1.02 Å) and one longer (1.57 Å) H–O bond length. There are seven inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted water-like geometry to two equivalent Ag2+ and two H1+ atoms. In the second O2- site, O2- is bonded in a distorted water-like geometry to one Ag2+ and two H1+ atoms. In the third O2- site, O2- is bonded in a distorted single-bond geometry to two equivalent Ag2+ and one H1+ atom. In the fourth O2- site, O2- is bonded in a 3-coordinate geometry to one Ag2+ and three H1+ atoms. In the fifth O2- site, O2- is bonded in a water-like geometry to two H1+ atoms. In the sixth O2- site, O2- is bonded in a 2-coordinate geometry to three H1+ atoms. In the seventh O2- site, O2- is bonded in a distorted single-bond geometry to three H1+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on Ag(Te5Au2)2 by Materials Project

(AuTe2)4AgTe2 is Calaverite-derived structured and crystallizes in the monoclinic C2/m space group. The structure is two-dimensional and consists of one AgTe2 sheet oriented in the (0, 0, 1) direction and four AuTe2 sheets oriented in the (0, 0, 1) direction. In the AgTe2 sheet, Ag1+ is bonded to six equivalent Te+1.40- atoms to form edge-sharing AgTe6 octahedra. There are two shorter (2.80 Å) and four longer (2.95 Å) Ag–Te bond lengths. Te+1.40- is bonded in a 6-coordinate geometry to three equivalent Ag1+ atoms. In each AuTe2 sheet, Au+3.25+ is bonded to six Te+1.40- atoms to form edge-sharing AuTe6 octahedra. There are a spread of Au–Te bond distances ranging from 2.77–2.95 Å. There are two inequivalent Te+1.40- sites. In the first Te+1.40- site, Te+1.40- is bonded in a 3-coordinate geometry to three equivalent Au+3.25+ atoms. In the second Te+1.40- site, Te+1.40- is bonded in a 3-coordinate geometry to three equivalent Au+3.25+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on Ag(Mo3Se4)2 by Materials Project

AgMo6Se8 crystallizes in the trigonal R-3 space group. The structure is three-dimensional. Mo+2.50+ is bonded to five Se2- atoms to form a mixture of edge and corner-sharing MoSe5 square pyramids. There are a spread of Mo–Se bond distances ranging from 2.55–2.67 Å. Ag1+ is bonded in a distorted body-centered cubic geometry to eight Se2- atoms. There are two shorter (2.53 Å) and six longer (3.32 Å) Ag–Se bond lengths. There are two inequivalent Se2- sites. In the first Se2- site, Se2- is bonded in a 1-coordinate geometry to three equivalent Mo+2.50+ and one Ag1+ atom. In the second Se2- site, Se2- is bonded in a 5-coordinate geometry to four equivalent Mo+2.50+ and one Ag1+ atom.

36 MATERIALS SCIENCE↗

Microstructural Development and Mechanical Properties for Reactive Air Brazing of ZTA to Ni Alloys using Ag-CuO Braze Alloys

Reactive air brazing (RAB) is a potential joining technique to join metal alloys to ceramics for a variety of applications. In the current study, nickel (Ni) alloys were heat treated to form an oxide layer prior to RAB joining to zirconia toughened alumina (ZTA). The Ni alloys evaluated were Nicrofer 6025 HT, Inconel 600, Inconel 693, Haynes 214 and Inconel 601. The ZTA studied had compositions of 0 to 15 wt% zirconia and 0 to 14 wt% glass. Four point-bend tests were performed to evaluate the joint strength of ZTA/ZTA and ZTA/nickel alloys brazed with Ag-2wt% CuO braze alloys. It was determined that the joint strength is not a function of the ZTA composition, but that the strength is a strong function of the chemistry and microstructure of the oxide layer formed on the nickel alloy. It was determined that an increase in the aluminum content of the Ni alloy resulted in an increase of the thickness of alumina in the oxide layer and was directly proportional to the bond strength with the exception of Inconel 601 which exhibited relatively high joint strengths even though it had a relatively low aluminum content.

Ag-CuO↗

Comparative analysis of cobalt oxide nanoisland stability and edge structures on three related noble metal surfaces: Au(111), Pt(111) and Ag(111)

Here, metal oxide nanostructures and thin films grown on metallic substrates have attracted strong attention as model catalysts and as interesting inverse catalyst systems in their own right. In this study, we investigate the role of metal support in the growth and stabilization of cobalt oxide nanostructures on the three related (111) surfaces of Au, Pt and Ag, as investigated by means of high-resolution scanning tunneling microscopy and DFT calculations. All three substrates promote the growth of crystalline CoO x (x = 1–2) islands under oxidative conditions, but we find several noteworthy differences in the occurrence and stabilization of four distinct cobalt oxide island phases: Co–O bilayers, O–Co–O trilayers, Co–O–Co–O double bilayers and O–Co–O–Co–O multilayers. Using atom-resolved images combined with analysis of defect lines in bilayer islands on Au and Pt, we furthermore unambiguously determine the edge structure. Interestingly, the island shape and abundances of edge types in bilayers change radically from mixed Co/O edge terminations on Au(111) to a predominance of Co terminated edges (~91 %) on Pt(111) which is especially interesting since the Co metal edges are expected to host the most active sites for water dissociation.

36 MATERIALS SCIENCE↗

Real-Time KMC Simulation of Vacancy-Mediated Intermixing in Au@Ag Octahedral Core–Cubic Shell Nanocrystals with Ab Initio-Guided Kinetics

Utilization of core–shell rather than monometallic nanocrystals (NCs) facilitates fine-tuning of NC properties for applications. However, compositional evolution via intermixing can degrade these properties prompting recent experimental studies. We develop an atomistic-level stochastic model for vacancy-mediated intermixing exploiting a formalism which allows incorporation at an ab initio density functional theory level of not just the thermodynamics of vacancy formation, but also relevant diffusion barriers for a vast number of possible local environments (in the core and in the shell, at the interface, and in the intermixed phase). This facilitates a predictive treatment and comprehensive understanding of intermixing on the relevant time scale (e.g., 10 1 –10 3 s). In contrast, previous modeling at the atomistic level utilized only unrealistic generic prescriptions of barriers or employed simplified continuum treatments. For Au@Ag octahedral core–cubic shell NCs, our modeling not only captures the experimentally observed rate or time scale for intermixing of ~100 s at 450 °C for 60 nm NCs, but also elucidates the underlying rate controlling processes and the effective intermixing barrier.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗