Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “7”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57

Superconductivity and ferromagnetism in Pd doped Y 9 Co 7

The ferromagnetic superconductor Y 9 Co 7 was chemically doped to yield the solid solution Y 9 Co 7-x Pd x for 0 < x < 0.4. The lattice parameter a does not depend on x, whereas c increases with increasing Pd content up to x = 0.2, the palladium solubility limit. The transition from ferromagnetism (T C = 4.25 K) to superconductivity (T sc = 2.4 K) was observed only for the parent Y 9 Co 7 compound. For the lowest tested Pd doping level (x = 0.05), ferromagnetism is enhanced strongly (T C = 9.35 K) and superconductivity is not seen above 1.8 K. Finally, the Curie temperature rapidly increases from 4.25 K to about 10 K for a Pd concentration of x = 0.1 and remains almost unchanged for Y 9 Co 6.8 Pd 0.2 .

36 MATERIALS SCIENCE↗

Stability of fluorite-type La 2 Ce 2 O 7 under extreme conditions

Here, the structural stability of fluorite-type La 2 Ce 2 O 7 was studied at pressure up to ~40 GPa and under hydrothermal conditions (~1 GPa, 350 °C), respectively, using synchrotron x-ray diffraction (XRD) and Raman scattering measurements. XRD measurements indicated that fluorite-type La 2 Ce 2 O 7 is not stable at pressures greater than 22.6 GPa and slowly transforms to a high-pressure phase. The high-pressure phase is not stable and changes back to the fluorite-type structure when pressure is released. The La 2 Ce 2 O 7 fluorite is also not stable under hydrothermal conditions and begins to react with water at 200~250 °C. Both Raman and XRD results suggest that lanthanum hydroxide La(OH) 3 and La 3+ -doped CeO 2 fluorite are the dominant products after hydrothermal treatment.

36 MATERIALS SCIENCE↗

The crystal structure of Grindelia robusta 7,13-copalyl diphosphate synthase reveals active site features controlling catalytic specificity

Diterpenoid natural products serve critical functions in plant development and ecological adaptation and many diterpenoids have economic value as bioproducts. The family of class II diterpene synthases catalyzes the committed reactions in diterpenoid biosynthesis, converting a common geranylgeranyl diphosphate precursor into different bicyclic prenyl diphosphate scaffolds. Enzymatic rearrangement and modification of these precursors generate the diversity of bioactive diterpenoids. We report the crystal structure of Grindelia robusta 7,13-copalyl diphosphate synthase, GrTPS2, at 2.1 Å of resolution. GrTPS2 catalyzes the committed reaction in the biosynthesis of grindelic acid, which represents the signature metabolite in species of gumweed (Grindelia spp., Asteraceae). Grindelic acid has been explored as a potential source for drug leads and biofuel production. The GrTPS2 crystal structure adopts the conserved three-domain fold of class II diterpene synthases featuring a functional active site in the γβ-domain and a vestigial α-domain. Substrate docking into the active site of the GrTPS2 apo protein structure predicted catalytic amino acids. Biochemical characterization of protein variants identified residues with impact on enzyme activity and catalytic specificity. Specifically, mutagenesis of Y457 provided mechanistic insight into the position-specific deprotonation of the intermediary carbocation to form the characteristic 7,13 double bond of 7,13-copalyl diphosphate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

K{sub 2}Fe{sub 2}B{sub 2}O{sub 7}: A transparent nonlinear optical crystal with frustrated magnetism

A new noncentrosymmetric ferroborate crystal, K{sub 2}Fe{sub 2}B{sub 2}O{sub 7}, has been grown from high temperature melt. Structure solution from single crystal X-ray diffraction shows that the title compound crystallizes in a trigonal space group P321 with cell dimensions of a=8.7475(12) A and c=8.5124(17) A. In the structure, FeO{sub 4} tetrahedron shares its three basal oxygen atoms with BO{sub 3} triangles forming a two-dimensional layer in the ab plane and the layers are connected by the apical Fe-O bonds along the c direction. The crystal is transparent in the visible and near infrared region from 500 to 2000 nm with three pronounced absorption bands ascribed to d-d transitions of tetrahedrally coordinated Fe{sup 3+} ions. Though, structurally analog to K{sub 2}Al{sub 2}B{sub 2}O{sub 7}, the further twisting of the BO{sub 3} groups between adjacent layers reduces its optical nonlinearity to a second-harmonic generation intensity of about 0.4 times that of KDP. Spin-glass behavior is observed at 20 K which is probably due to geometrically magnetic frustration of the triangular Fe net in the ab plane. - Graphical abstract: Single crystal of a new ferroborate K{sub 2}Fe{sub 2}B{sub 2}O{sub 7}, space group P321, a=8.7475(3) A, c=8.5124(3) A, was obtained and characterized. It exhibits considerable SHG efficiency and frustrated magnetism originated from the triangular Fe net in the ab plane.

36 MATERIALS SCIENCE↗

Geometric parameterization of the YBaCo{sub 4}O{sub 7} structure type: Implications for stability of the hexagonal form and oxygen uptake

We explore the stability of the hexagonal form of MBaCo{sub 4}O{sub 7} cobaltites in terms of geometric characteristics of the crystal structure and Global Instability Index (GII) based on the bond-valence considerations. Mismatch between an M{sup 3+/2+} and the three-dimensional network of CoO{sub 4} tetrahedra, whether expressed using an M ionic radii or GII, is shown to essentially determine both the temperature of structural transition to an orthorhombic modification and oxygen storage properties. A number of M cations not reported in the literature are identified to be suitable for the octahedral sites in an MBaCo{sub 4}O{sub 7} structure. - Graphical Abstract: Global Instability Index (GII) for an M{sup 3+}BaCo{sub 4}{sup 2.25+}O{sub 7}

36 MATERIALS SCIENCE↗

Synthesis and characterization of hybrid materials based on 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid and Dawson-type tungstophosphate K{sub 7}[H{sub 4}PW{sub 18}O{sub 62}].18H{sub 2}O and K{sub 6}[P{sub 2}W{sub 18}O{sub 62}].13H{sub 2}O

In this study, we synthesized hybrid materials using well-Dawson polyoxometalates (POMs), K{sub 7}[H{sub 4}PW{sub 18}O{sub 62}].18H{sub 2}O or K{sub 6}[P{sub 2}W{sub 18}O{sub 62}].13H{sub 2}O and a room temperature ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF{sub 4}]). K, W, P and CHN elemental analysis showed that one mole of [H{sub 4}PW{sub 18}O{sub 62}]{sup 7-} reacts with 6 moles of BMIM{sup +} and one mole of [P{sub 2}W{sub 18}O{sub 62}]{sup 6-} reacts with 4 moles of BMIM{sup +} to form, respectively, K[BMIM]{sub 6}H{sub 4}PW{sub 18}O{sub 62} and K{sub 2}[BMIM]{sub 4}P{sub 2}W{sub 18}O{sub 62}. X-ray diffraction illustrated amorphous structure of the hybrid materials. FT-IR spectra showed the presence of both 1-butyl-3-methylimidazolium cation and the Dawson anion. TG analysis displayed a relative thermal stability of the hybrid materials compared to the parents Dawson POMs. Cyclic voltammetry showed that the reduction peak potentials of the Dawson anion in the hybrid materials shift towards negative values and the shift is more pronounced for K[BMIM]{sub 6}H{sub 4}PW{sub 18}O{sub 62} compared to K{sub 2}[BMIM]{sub 4}P{sub 2}W{sub 18}O{sub 62}. This was attributed to a decrease in the acidity of the Dawson POM anion in the hybrid material. -- Graphical abstract: Powder XRD patterns of (a) PW{sub 18}, (b) K[BMIM]{sub 6}H{sub 4}PW{sub 18}O{sub 62}, (c) P{sub 2}W{sub 18}, and (d) K{sub 2}[BMIM]{sub 4}P{sub 2}W{sub 18}O{sub 62}. Display Omitted Research highlights: {yields} 1-butyl-3-methylimidazolium tetrafluoroborate([BMIM][BF{sub 4}]) reacts with K{sub 7}[H{sub 4}PW{sub 18}O{sub 62}].18H{sub 2}O to form K[BMIM]{sub 6}H{sub 4}PW{sub 18}O{sub 62}. {yields} [BMIM][BF{sub 4}] reacts with K{sub 6}[P{sub 2}W{sub 18}O{sub 62}].13H{sub 2}O to form K{sub 2}[BMIM]{sub 4}P{sub 2}W{sub 18}O{sub 62}. {yields} K[BMIM]{sub 6}H{sub 4}PW{sub 18}O{sub 62} and K{sub 2}[BMIM]{sub 4}P{sub 2}W{sub 18}O{sub 62} displayed amorphous structures. {yields} K[BMIM]{sub 6}H{sub 4}PW{sub 18}O{sub 62} and K{sub 2}[BMIM]{sub 4}P{sub 2}W{sub 18}O{sub 62} illustrated low water content. {yields} K[BMIM]{sub 6}H{sub 4}PW{sub 18}O{sub 62} and K{sub 2}[BMIM]{sub 4}P{sub 2}W{sub 18}O{sub 62} showed improved thermal stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Neutron diffraction studies of Gd{sub 2}Zr{sub 2}O{sub 7} pyrochlore

The structure of Gd{sub 2}Zr{sub 2}O{sub 7} pyrochlore over the temperature range 4-300 K has been refined from powder neutron diffraction data. The sample was enriched in {sup 160}Gd to avoid the high neutron absorption of naturally occurring Gd. The diffraction pattern showed well resolved superlattice reflections indicative of the pyrochlore structure and no evidence is found for anion-disorder from the structural refinements. - Graphical abstract: Gd{sub 2}Zr{sub 2}O{sub 7} enriched in {sup 160}Gd prepared. Neutron diffraction reveals ordering of the anions. Precise structure established. Highlights: > A sample of Gd{sub 2}Zr{sub 2}O{sub 7} was prepared using {sup 160}Gd. > Precise structure established from 4 to 300 K using powder neutron diffraction. > No evidence for disorder of the oxygen anions is found.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low temperature fluorination of Sr{sub 3}Fe{sub 2}O{sub 7-x} with polyvinylidine fluoride: An X-ray powder diffraction and Moessbauer spectroscopy study

Fluorination of the Ruddlesden Popper phase, Sr{sub 3}Fe{sub 2}O{sub 7-x} by heat treatment with polyvinylidine fluoride (PVDF) gives a range of novel oxide fluoride compounds. Fluorination with 1 mol equivalent PVDF leads to a filling of the normal Ruddlesden Popper structure anion sites and a material of composition Sr{sub 3}Fe{sub 2}O{sub 5+x}F{sub 2-x} (x Almost-Equal-To 0.28(4)) which contains both Fe{sup 4+} and Fe{sup 3+}. Increasing the amount of PVDF to 2 mol equivalent leads to an increase in anion content due to filling of half the interstitial sites within the structure, with iron being completely reduced to Fe{sup 3+} leading to a composition Sr{sub 3}Fe{sub 2}O{sub 4}F{sub 4}. An increase in the amount of PVDF to Almost-Equal-To 3 mol equivalent leads to a further increase in unit cell volume, attributed to complete filling of the interstitial sites and a composition Sr{sub 3}Fe{sub 2}O{sub 3}F{sub 6}. {sup 57}Fe Moessbauer spectra in the temperature range 10-300 K demonstrated the complexity of the magnetic interactions in each of the three phases which reflect different local compositions of oxygen and fluorine around the iron ions thus influencing the superexchange pathways. - Graphical abstract: Low temperature (375 Degree-Sign C) fluorination of Sr{sub 3}Fe{sub 2}O{sub 7-x} with poly(vinylidene fluoride) leads to the production of three new Ruddlesden Popper oxide fluorides with progressive filling of the anion sites within the structure. Highlights: Black-Right-Pointing-Pointer The fluorination of Sr{sub 3}Fe{sub 2}O{sub 7-x} using PVDF. Black-Right-Pointing-Pointer The control of the fluorine content with amount of PVDF used. Black-Right-Pointing-Pointer The synthesis of three new Fe based oxide fluorides. Black-Right-Pointing-Pointer The identification of the structures of these oxide fluorides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The fluorite related modulated structures of the Gd{sub 2}(Zr{sub 2-x}Ce{sub x})O{sub 7} solid solution: An analogue for Pu disposition

We present an overview of the Gd{sub 2}(Zr{sub 2-x}Ce{sub x})O{sub 7} phase diagram, of interest as a model system for ceramic disposition of Pu (with Ce as a Pu surrogate). The fluorite related structures of this solid solution were determined using a modulated structure approach, to identify the underlying cation and vacancy ordering mechanisms from analysis of key satellite reflections in selected zone axis electron diffraction patterns. This revealed the formation of four structure types: pyrochlore for x<0.25, defect fluorite for 0.5 1.50. X-ray absorption (XAS) and electron energy loss (EELS) spectra confirmed the presence of Ce{sup 4+} as the dominant species in compositions across this system, remaining analogous to Pu{sup 4+}. - Graphical abstract: Electron diffraction reveals the cation vacancy ordering mechanisms leading to fluorite related superstructures in the Gd{sub 2}(Zr{sub 2-x}Ce{sub x})O{sub 7} solid solution. Highlights: Black-Right-Pointing-Pointer The fluorite related solid solution Gd{sub 2}(Zr{sub 1-x}Ce{sub x})O{sub 7} was prepared by solid state synthesis. Black-Right-Pointing-Pointer Ce L{sub 3} edge XAS and Ce M{sub 4,5} EELS measurements show Ce substitutes as Ce{sup 4+}. Black-Right-Pointing-Pointer Cation and oxygen vacancy ordering results in four fluorite related structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structure of layered ferroelectric high-k titanate Pr{sub 2}Ti{sub 2}O{sub 7}

The spectroscopic parameters and electronic structure of binary titanate Pr{sub 2}Ti{sub 2}O{sub 7} have been studied by IR-, Raman and X-ray photoelectron spectroscopy (XPS) for the powder sample prepared by solid state synthesis. The spectral features of valence band and all constituent element core levels have been considered. The Auger parameters of titanium and oxygen in Pr{sub 2}Ti{sub 2}O{sub 7} have been determined as {alpha}{sub Ti}=872.8 and {alpha}{sub O}=1042.3 eV. Variations of cation-anion bond ionicity have been discussed using binding energy differences {Delta}{sub Ti}=(BE O 1s-BE Ti 2p{sub 3/2})=71.6 eV and {Delta}{sub Pr}=BE(Pr 3d{sub 5/2})-BE(O 1s)=403.8 eV as key parameters in comparison with those of other titanium- and praseodymium-bearing oxides. Highlights: Black-Right-Pointing-Pointer Solid state synthesis of polar titanate Pr{sub 2}Ti{sub 2}O{sub 7}. Black-Right-Pointing-Pointer Structural and spectroscopic properties and electronic structure determination. Black-Right-Pointing-Pointer Ti-O and Pr-O bonding analysis using Ti 2p{sub 3/2}, Pr 3d{sub 5/2} and O 1s core levels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and structure of a new family of 3d-4f heterometallic compounds Rb{sub 7}LnFe{sub 6}O{sub 2}(PO{sub 4}){sub 8} (Ln=Sm, Eu, Gd, Dy): Magnetic properties of the Sm-, Gd-, Dy-derivatives

A new family of mixed lanthanide(III) and iron(III) oxo-phosphate phases, Rb{sub 7}LnFe{sub 6}O{sub 2}(PO{sub 4}){sub 8} (Ln=Sm 1, Eu 2, Gd 3, Dy 4), was isolated by using a high-temperature, solid-state method in molten-salt media. The X-ray single-crystal structure analysis shows that these isomorphic derivatives crystallize in a triclinic space group P-1 (no. 2); Z=1. The 3-D framework of these 3d-4f oxo-phosphates are comprised of LnO{sub 6} octahedral, FeO{sub 5} trigonal bipyramidal (tbp), and {mu}{sub 3}-oxo [Fe{sub 4}O{sub 18}] tetrameric units interconnected through PO{sub 4} tetrahedra. The preliminary results of the temperature-dependent magnetic susceptibility measurements for selected compounds (1, 3, 4) reveal antiferromagnetic-like behavior. 1 shows a weak antiferromagnetric ordering at T{sub N}={approx}7 K while others show little evidence of long-range magnetic order down to 2 K. All three compounds have measured magnetic moments significantly smaller than the expected values. - Graphical abstract: The extended framework is described by the connectivity of three distinct types of paramagnetic units. The temperature-dependent, lower than expected effective magnetic moments are reported. Highlights: Black-Right-Pointing-Pointer A new family of mixed lanthanide(III) and iron(III) oxo-phosphates is isolated. Black-Right-Pointing-Pointer Features PO{sub 4}-linked paramagnetic units of LnO{sub 6}, FeO{sub 5}, and {mu}{sub 3}-oxo [Fe{sub 4}O{sub 18}]. Black-Right-Pointing-Pointer Sm-derivative orders at T{sub N}{approx}7 K while Gd- and Dy-derivatives show absence of order.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure of fluorite-related Ln{sub 3}SbO{sub 7} (Ln=La–Dy) ceramics studied by synchrotron X-ray diffraction and Raman scattering

Ln{sub 3}SbO{sub 7} (Ln=La, Pr, Nd, Sm, Eu, Gd, Tb and Dy) ceramics were synthesized by solid-state reaction in optimized conditions of temperature and time to yield single-phase ceramics. The crystal structures of the obtained ceramics were investigated by synchrotron X-ray diffraction, second harmonic generation (SHG) and Raman scattering. All samples exhibited fluorite-type orthorhombic structures with different oxygen arrangements as a function of the ionic radius of the lanthanide metal. For ceramics with the largest ionic radii (La–Nd), the ceramics crystallized into the Cmcm space group, while the ceramics with intermediate and smallest ionic radii (Sm–Dy) exhibited a different crystal structure belonging to the same space group, described under the Ccmm setting. The results from SHG and Raman scattering confirmed these settings and ruled out any possibility for the non-centrosymmetric C222{sub 1} space group describing the structure of the small ionic radii ceramics, solving a recent controversy in the literature. Besides, the Raman modes for all samples are reported for the first time, showing characteristic features for each group of samples. - Graphical abstract: Raman spectrum for La{sub 3}SbO{sub 7} ceramics showing their 22 phonon modes adjusted through Lorentzian lines. According to synchrotron X-ray diffraction and Raman scattering, this material belongs to the space group Cmcm. - Highlights: • Ln{sub 3}SbO{sub 7} ceramics belonging to the space groups Cmcm and Ccmm are synthesized. • SXRD, SHG and Raman scattering confirmed the orthorhombic structures. • Ccmm instead of C222{sub 1} is the correct one based on SHG and Raman data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synchrotron X-ray diffraction and Raman spectroscopy of Ln{sub 3}NbO{sub 7} (Ln=La, Pr, Nd, Sm-Lu) ceramics obtained by molten-salt synthesis

Ln{sub 3}NbO{sub 7} (Ln=La, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu) ceramics were obtained by molten-salt synthesis and their structures were systematically investigated by synchrotron X-ray diffraction (SXRD), second harmonic generation (SHG) and Raman spectroscopy. It was observed that ceramics with the largest ionic radii (La, Pr, Nd) crystallized into the Pmcn space group, while the ceramics with intermediate ionic radii (Sm-Gd) exhibited a different crystal structure belonging to the Ccmm space group. For this last group of ceramics, this result was corroborated by SHG and Raman scattering and ruled out any possibility for the non-centrosymmetric C 222{sub 1} space group, solving a recent controversy in the literature. Finally, according to SXRD, Tb-Lu containing samples exhibited an average defect fluorite structure (Fm3{sup ¯}m space group). Nonetheless, broad scattering at forbidden Bragg reflections indicates the presence of short-range domains with lower symmetry. Vibrational spectroscopy showed the presence of six Raman-active modes, inconsistent with the average cubic fluorite structure, and in line with the existence of lower-symmetry nano-domains immersed in the average fluorite structure of these ceramics. - Graphical abstract: Raman spectrum for Sm{sub 3}NbO{sub 7} ceramics showing their 27 phonon modes adjusted through Lorentzian lines. According to synchrotron X-ray diffraction and Raman scattering, this material belongs to the space group Cmcm. Display Omitted - Highlights: • Ln{sub 3}NbO{sub 7} ceramics were obtained by molten-salt synthesis. • SXRD, SHG and Raman scattering confirmed orthorhombic and cubic structures. • Ccmm instead of C222{sub 1} is the correct structure for Sm–Gd ceramics. • Pmcn space group was confirmed for La-, Pr- and Nd-based ceramics. • For Tb–Lu ceramics, ordered domains of a pyrochlore structure were observed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

From Ag{sub 2}Sb{sub 2}O{sub 6} to Cd{sub 2}Sb{sub 2}O{sub 7}: Investigations on an anion-deficient to ideal pyrochlore solid solution

A complete solid solution between the anion-deficient pyrochlore Ag{sub 2}Sb{sub 2}O{sub 6} and the ideal pyrochlore Cd{sub 2}Sb{sub 2}O{sub 7} has been synthesized through the standard solid state ceramic method. Each composition has been characterized by various different techniques, including powder X-ray diffraction, optical spectroscopy, electron paramagnetic resonance and {sup 121}Sb Mössbauer spectroscopy. Computational methods based on density functional theory complement this investigation. Photocatalytic activity has been studied, and transport properties have been measured on pellets densified by spark plasma sintering. The analysis of the data collected from these various techniques enables a comprehensive characterization of the complete solid solution and revealed an anomalous behavior in the Cd-rich end of the solid solution, which has been proposed to arise from a possible radical O{sup −} species in small concentrations. - Graphical abstract: A complete solid solution between the anion-deficient pyrochlore Ag{sub 2}Sb{sub 2}O{sub 6} and the ideal pyrochlore Cd{sub 2}Sb{sub 2}O{sub 7} has been synthesized and investigated through various techniques including X-ray diffraction, electron paramagnetic spectroscopy, and {sup 121}Sb-Mössbauer spectroscopy. Optical and electrical measurements have been performed, and computational methods have been applied to determine the density of states. Photocatalytic activity was monitored by the degradation of Methylene Blue, and upon cadmium substitution, the degradation amount decreased, which is attributed primarily to the changing optical and electrical properties of the solid solution. Display Omitted - Highlights: • A complete solid solution between Ag{sub 2}Sb{sub 2}O{sub 6} and Cd{sub 2}Sb{sub 2}O{sub 7} has been synthesized. • XRD reveals a relatively constant lattice parameter as the series progresses. • Optical and electrical properties have been measured for the solid solution. • Computational methods have been used to determine the density of states. • Photocatalytic degradation of Methylene Blue decreased upon cadmium substitution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fast, selective adsorption of Cu{sup 2+} from aqueous mixed metal ions solution using 1,4,7-triazacyclononane modified SBA-15 silica adsorbent (SBA-TACN)

A new SBA-15 supported 1,4,7-triazacyclononane modified mesoporous silica adsorbent (SBA-TACN) has been synthesized using post grafting route and has thoroughly been characterized by small angle X-ray scattering (SAXS), N{sub 2} adsorption–desorption measurements, Fourier-transform infrared (FT-IR), solid-state {sup 29}Si MAS and {sup 13}C CP MAS NMR spectroscopy, transmission electron (TEM) and scanning electron microscopy (SEM), elemental analysis (EA) and thermogravimetric analysis (TGA). The synthesized material shows excellent copper (II) ion adsorption selectivity at pH 5 in mixed metal ion solution containing Cu{sup 2+}, Cr{sup 3+}, Ni{sup 2+}, Co{sup 2+} and Li{sup +}. The copper ion adsorption capacity of the SBA-TACN can reach a maximum value of 0.67 mmol/g. Possible adsorption mechanism of metal ions on SBA-TACN has been discussed. The adsorbent can be readily regenerated by HNO{sub 3}–NH{sub 3} treatment. -- Graphical abstract: A new SBA-15 supported 1,4,7-triazacyclononane (TACN) modified mesoporous silica (SBA-TACN) adsorbent has been developed which shows excellent selectivity in Cu{sup 2+} adsorption from aqueous mixed metal ion solutions at pH 5. The copper ion adsorption capacity of the SBA-TACN can reach a maximum value of 0.67 mmol/g. The adsobent is stable enough to be used atleast for three cycles. Highlights: • Synthesis of a new TACN modified mesoporous silica SBA-15 type adsorbent. • The density of 1,4,7-triazacyclononane on SBA-15 is 1.22 mmol/g. • First report on the selective Cu{sup 2+} adsorption by TACN modified mesoporous silica. • Cu{sup 2+} adsorption capacity of the SBA-TACN can reach a maximum value of 0.67 mmol/g. • Potential candidate for selective removal of Cu{sup 2+} from contaminated water samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Top-seeded solution crystal growth of noncentrosymmetric and polar Zn{sub 2}TeMoO{sub 7} (ZTM)

A top-seeded solution growth (TSSG) method was used to grow large, centimeter size, crystals of Zn{sub 2}TeMoO{sub 7} (ZTM) – a noncentrosymmetric and polar material. A TeO{sub 2}–MoO{sub 3} mixture in combination with the parent compound was used as a flux. The morphologies of the crystals can be controlled by different rotation speeds. Optical spectra indicate that ZTM is transparent up to 5.25 µm with a UV absorption edge of 300 nm. In addition, the refractive index along the optical x, y, and z axes was measured at different wavelengths. - Highlights: • Zn{sub 2}TeMo{sub 2}O{sub 7} crystals were grown by top-seeded solution growth (TSSG) method. • The morphology of the single crystals is controllable by changing rotation speed. • Optical transmission spectra indicate Zn{sub 2}TeMo{sub 2}O{sub 7} has a broad transmission range. • Refractive index along optical axes was measured at different wavelengths.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A clear effect of charge compensation through Na{sup +} co-doping on the luminescence spectra and decay kinetics of Nd{sup 3+}-doped CaAl{sub 4}O{sub 7}

We present a detailed analysis of luminescence behavior of singly Nd{sup 3+} doped and Nd{sup 3+}, Na{sup +} co-doped calcium aluminates powders: Ca{sub 1−x}Nd{sub x}Al{sub 4}O{sub 7} and Ca{sub 1−2x}Nd{sub x}Na{sub x}Al{sub 4}O{sub 7} (x=0.001–0.1). Relatively intense Nd{sup 3+} luminescence in IR region corresponding to typical {sup 4}F{sub 3/2}→{sup 4}I{sub J} (J=9/2–13/2) transitions with maximum located at about 1079 nm was obtained in all samples on direct excitation into f–f levels. The effect of dopant concentration and charge compensation by co-doping with Na{sup +} ions on morphology and optical properties were studied. The results show that both, the Nd{sup 3+} concentration and the alkali metal co-doping affected the optical properties but had no influence on the powders morphology. The studies of luminescence spectra (298 and 77 K) in a function of dopant concentration showed an increasing distortion of the local symmetry of Nd{sup 3+}with raising activator content due to certain defects created in the crystal lattice. On the other hand Na{sup +} addition led to significant narrowing of absorption and luminescence bands and also a reduction of the number of their components, showing smaller disturbance of Nd{sup 3+} ions local symmetries. Consequently, charge compensated by Na{sup +} co-doping materials showed significantly enhanced Nd{sup 3+} luminescence. The decrease of emission intensity and luminescence lifetimes with increase of activator concentration was attributed mainly to phonon-assisted cross-relaxation processes between Nd{sup 3+} ions. Analysis with Inokuti–Hirayama model indicated dipole–dipole mechanism of ion-ion interaction. Na{sup +} addition led to much smaller concentration quenching due to smaller clustering of dopant ions in CaAl{sub 4}O{sub 7} lattice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, crystal structure, electrical properties, and sodium transport pathways of the new arsenate Na{sub 4}Co{sub 7}(AsO{sub 4}){sub 6}

A new sodium cobalt (II) arsenate Na{sub 4}Co{sub 7}(AsO{sub 4}){sub 6} has been synthesized by a solid-state reaction and its crystal structure determined from single crystal X-ray diffraction data. It crystallizes in the monoclinic system, space group C2/m, with a=10.7098(9) Å, b=14.7837(9) Å, c=6.6845(7) Å, and β=105.545(9)°. The structure is described as a three-dimensional framework built up of corner-edge sharing CoO{sub 6}, CoO{sub 4} and AsO{sub 4} polyhedra, with interconnecting channels along [100] in which the Na{sup +} cations are located. The densest ceramics with relative density of 94% was obtained by ball milling and optimization of sintering temperature, and its microstructure characterized by scanning electron microscopy. The electrical properties of the ceramics were studied over a temperature interval from 280 °C to 560 °C using the complex impedance spectroscopy over the range of 13 MHz–5 Hz. The ionic bulk conductivity value of the sample at 360 °C is 2.51 10{sup −5} S cm{sup −1} and the measured activation energy is Ea=1 eV. The sodium migration pathways in the crystal structure were investigated computationally using the bond valence site energy (BVSE) model and classical molecular dynamics (MD) simulations. - Graphical abstract: Correlation between crystal structure, microstructure and ionic conductivity . Display Omitted - Highlights: • A new arsenate Na{sub 4}Co{sub 7}(AsO{sub 4}){sub 6} was prepared by solid state reaction. • Its crystal structure was determined by powder X-ray diffraction. • Na{sup +} ionic conductivity was probed by complex impedance spectroscopy. • Na{sup +} conduction pathways were modeled by bond-valence method and molecular dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗