Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “waveform”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Tests of General Relativity With the Binary Black Hole Signals from the LIGO-Virgo Catalog GWTC-1

The detection of gravitational waves by Advanced LIGO and Advanced Virgo provides an opportunity to test general relativity in a regime that is inaccessible to traditional astronomical observations and laboratory tests. We present four tests of the consistency of the data with binary black hole gravitational waveforms predicted by general relativity. One test subtracts the best-fit waveform from the data and checks the consistency of the residual with detector noise. The second test checks the consistency of the low- and high-frequency parts of the observed signals. The third test checks that phenomenological deviations introduced in the waveform model (including in the post-Newtonian coefficients) are consistent with 0. The fourth test constrains modifications to the propagation of gravitational waves due to a modified dispersion relation, including that from a massive graviton. We present results both for individual events and also results obtained by combining together particularly strong events from the first and second observing runs of Advanced LIGO and Advanced Virgo, as collected in the catalog GWTC-1. We do not find any inconsistency of the data with the predictions of general relativity and improve our previously presented combined constraints by factors of 1.1 to 2.5. In particular, we bound the mass of the graviton to be 𝑚𝑔≤4.7×10 −23 eV/𝑐 2 (90% credible level), an improvement of a factor of 1.6 over our previously presented results. Additionally, we check that the four gravitational-wave events published for the first time in GWTC-1 do not lead to stronger constraints on alternative polarizations than those published previously.

B P Abbott↗
NASA NTRSDate not supplied

Uncertainty Estimates for Sonic-Boom Pressure Signatures and Loudness Carpets

A non-intrusive uncertainty quantification method is applied to computational analysis of supersonic, low-boom aircraft. The mean and standard deviation statistics of the pressure waveforms and loudness metrics are evaluated through use of numerical quadrature. The probability density function (p.d.f.) of these outputs is evaluated via kernel density estimation. The simulations use an inviscid, embedded-boundary Cartesian-mesh flow solver in the nearfield combined with an augmented Burgers’ equation solver for propagation in the farfield. The results show that the p.d.f. of the waveform is bimodal at shocks, which makes the mean and standard deviation statistics inappropriate. Despite this limitation, we show that the moment statistics can provide effective assessment of discrepancies when comparing with experimental data. This is demonstrated by presenting uncertainty analysis of a wind-tunnel test and showing that we significantly improve the predictions when we include the test uncertainties in the simulation. Normal distributions are obtained for the ground signature and loudness metrics, which is primarily due to the careful shaping of the low-boom waveform. Separation of variables and error control are used to reduce computational cost. We demonstrate that this is an efficient approach in the sense of balancing numerical errors in the statistics quadrature with discretization errors in the solvers.

ARMD↗
NASA NTRSDate not supplied

Turbulence Effects on Shaped Booms: Propagation Simulations Using KZKFourier

Upcoming X-59 aircraft flight tests as part of NASA’s Quesst Mission are expected to occur in a range of atmospheric conditions. Sensitivity of ground waveform acoustic metrics to turbulent perturbations during propagation complicates the determination of noise levels. A series of simulations through turbulence was executed using the KZKFourier model of Stout et al. to develop a database of results for expanding the functionality of NASA tools for estimating turbulence effects on shaped-boom ground waveforms. For 45 cases covering a seven-factor design space, multiple realizations of turbulence were generated to characterize statistical turbulence effects on levels of six acoustic metrics. An individual simulation in the study produced over one thousand waveforms across a virtual microphone array. Different measures were used to evaluate refinement of results with increasing number of simulations. Data suggest that mean effects and variability were most strongly influenced by propagation distance and velocity fluctuation intensity. Although local increases in acoustic metrics were common, the overall average result in all cases was a reduction in metric levels. Sensitivity of acoustic metrics varied, with mean reductions of up to 2 dB in Perceived Level occurring across the 45 cases.

turbulence↗
NASA NTRSDate not supplied

Turbulence Effects on Shaped Booms: Finite Impulse Response Filter Development

Numerical simulations of propagation through turbulent atmospheres can quantify effects on ground waveforms, but such simulations are computationally expensive. To enable quick turnaround analyses as required by NASA’s Quesst Mission, updating the N-wave filtering approach developed by researchers at The Pennsylvania State University to include shaped booms is proposed as an alternative method for estimating turbulence effects on acoustic metrics more quickly. Beginning with a nearfield pressure cylinder modeled after the on-design X-59 configuration, a database of propagation results at 45 turbulence conditions was compiled using nonlinear turbulence propagation modeling code (KZKFourier) and used as input to a process for generating finite impulse response (FIR) filters. Ground waveforms distorted by turbulence were selected to represent mean and mean±standard deviation levels for six metrics, and corresponding FIR filters were generated through a matrix deconvolution process. In order to evaluate how well the FIR filters perform, additional KZKFourier verification cases were devised with different input conditions, and results used as a benchmark. Convolution of shaped boom waveforms modeled using nonturbulent propagation simulations with the new FIR filters showed better agreement on average with KZKFourier statistical results than the N-wave-based FIR filters.

turbulence↗
NASA NTRS2024

Demonstration of GaN HEMT MMIC High-Power Amplifier for Lunar Proximity Communications

In this paper, we demonstrate a high efficiency, Ka-band (23.15 to 23.55 GHz) GaN HEMT MMIC based single-ended high power amplifier (HPA). The measured Pout, Gain, PAE, RMS EVM for Offset-QPSK, 8PSK, 16APSK, and 32APSK waveforms, 3rd-order IMD products, noise figure, and phase noise are presented. The results indicate that the saturated output power (P sat ) and the small signal Gain are on the order of 38.8 dBm (7.6 W) and 29.3 dB, respectively. The PAE at Psat is 20.0%. At the 1-dB compression point, the RMS EVM and the out-of-band spectral regrowth are less than 6% and –26 dBc respectively, for all four waveforms. Additionally, the spectrum is in compliance with the NTIA mask requirements for all four waveforms. The output 3rd-order intercept point (OIP3) is on the order of 42 dBm. The noise figure is less than 9.5 dB. The SSB phase noise spectral density is compliant with the envelope defined by the MIL-STD-188-164C. The HPA can enable proximity forward links between the orbiting Gateway/relay satellites and the lunar surface elements and cross links between relay satellites.

Ka-band↗
NASA NTRSDate not supplied

Evaluation of Finite Impulse Response Filters for Turbulence Effects on Sonic Booms

Turbulence effects on sonic booms lead to random variability of sonic boom waveforms measured on the ground, complicating the prediction of such waveforms using sonic boom propagation codes that do not account for turbulence effects. The NASA PCBoom software is one such code shown to accurately predict sonic booms above the atmospheric boundary layer but not those on the ground. Analyses of measured sonic booms show that, on average, the turbulence effects result in sonic boom loudness reduction, on average, that increases with propagation distance and turbulence strength. To efficiently account for such effects, a signal processing-based approach has been developed at NASA using finite impulse response filters derived from predicted waveforms by solving a nonlinear parabolic equation. Analyses indicate that the mean loudness reduction obtained using the filters does not increase with propagation distance or with increasing turbulence strength, in disagreement with flight test data. An alternative approach to the filters is currently under development employing the multiple scattering theory (MST) of wave propagation. Available results from the physics-based MST approach are used to evaluate the predictive capability of the filters, suggesting that the filters can severely underestimate the prediction of the MST approach.

sonic booms↗
NASA NTRSDate not supplied

Evaluation of Finite Impulse Response Filters for Turbulence Effects on Sonic Booms

Turbulence effects on sonic booms lead to random variability of sonic boom waveforms measured on the ground, complicating the prediction of such waveforms using sonic boom propagation codes that do not account for turbulence effects. The NASA PCBoom software is one such code shown to accurately predict sonic booms above the atmospheric boundary layer but not those on the ground. Analyses of measured sonic booms show that, on average, the turbulence effects result in sonic boom loudness reduction, on average, that increases with propagation distance and turbulence strength. To efficiently account for such effects, a signal processing-based approach has been developed at NASA using finite impulse response filters derived from predicted waveforms by solving a nonlinear parabolic equation. Analyses indicate that the mean loudness reduction obtained using the filters does not increase with propagation distance or with increasing turbulence strength, in disagreement with flight test data. An alternative approach to the filters is currently under development employing the multiple scattering theory (MST) of wave propagation. Available results from the physics-based MST approach are used to evaluate the predictive capability of the filters, suggesting that the filters can severely underestimate the prediction of the MST approach.

sonic booms↗
DOE OSTI2015

A Bunch Compression Method for Free Electron Lasers that Avoids Parasitic Compressions

Virtually all existing high energy (>few MeV) linac-driven FELs compress the electron bunch length though the use of off-crest acceleration on the rising side of the RF waveform followed by transport through a magnetic chicane. This approach has at least three flaws: 1) it is difficult to correct aberrations--particularly RF curvature, 2) rising side acceleration exacerbates space charge-induced distortion of the longitudinal phase space, and 3) all achromatic "negative compaction" compressors create parasitic compression during the final compression process, increasing the CSR-induced emittance growth. One can avoid these deficiencies by using acceleration on the falling side of the RF waveform and a compressor with M 56 >0. This approach offers multiple advantages: 1) It is readily achieved in beam lines supporting simple schemes for aberration compensation, 2) Longitudinal space charge (LSC)-induced phase space distortion tends, on the falling side of the RF waveform, to enhance the chirp, and 3) Compressors with M 56 >0 can be configured to avoid spurious over-compression. We will discuss this bunch compression scheme in detail and give results of a successful beam test in April 2012 using the JLab UV Demo FEL

43 PARTICLE ACCELERATORS↗
DOE OSTI2016

Gamma ray spectroscopy employing divalent europium-doped alkaline earth halides and digital readout for accurate histogramming

According to one embodiment, a scintillator radiation detector system includes a scintillator, and a processing device for processing pulse traces corresponding to light pulses from the scintillator, where the processing device is configured to: process each pulse trace over at least two temporal windows and to use pulse digitization to improve energy resolution of the system. According to another embodiment, a scintillator radiation detector system includes a processing device configured to: fit digitized scintillation waveforms to an algorithm, perform a direct integration of fit parameters, process multiple integration windows for each digitized scintillation waveform to determine a correction factor, and apply the correction factor to each digitized scintillation waveform.

36 MATERIALS SCIENCE↗
DOE OSTI2016

BICMOS power detector for pulsed Rf power amplifiers

A BiCMOS power detector for pulsed radio-frequency power amplifiers is proposed. Given the pulse waveform and a fraction of the power amplifier's input or output signal, the detector utilizes a low-frequency feedback loop to perform a successive approximation of the amplitude of the input signal. Upon completion of the successive approximation, the detector returns 9-bits representing the amplitude of the RF input signal. Using the pulse waveform from the power amplifier, the detector can dynamically adjust the rate of the binary search operation in order to return the updated amplitude information of the RF input signal at least every 1ms. The detector can handle pulse waveform frequencies from 50kHz to 10MHz with duty cycles in the range of 5- 50% and peak power levels of -10 to 10dBm. The signal amplitude measurement can be converted to a peak power measurement accurate to within ±0.6dB of the input RF power.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2017

Band Excitation for Scanning Probe Microscopy

The Band Excitation (BE) technique for scanning probe microscopy uses a precisely determined waveform that contains specific frequencies to excite the cantilever or sample in an atomic force microscope to extract more information, and more reliable information from a sample. There are a myriad of details and complexities associated with implementing the BE technique. There is therefore a need to have a user friendly interface that allows typical microscopists access to this methodology. This software enables users of atomic force microscopes to easily: build complex band-excitation waveforms, set-up the microscope scanning conditions, configure the input and output electronics for generate the waveform as a voltage signal and capture the response of the system, perform analysis on the captured response, and display the results of the measurement.

Jesse, Stephen↗
DOE OSTI2018

Temperature analysis with voltage-current time differential operation of electrochemical sensors

A method for temperature analysis of a gas stream. The method includes identifying a temperature parameter of an affected waveform signal. The method also includes calculating a change in the temperature parameter by comparing the affected waveform signal with an original waveform signal. The method also includes generating a value from the calculated change which corresponds to the temperature of the gas stream.

47 OTHER INSTRUMENTATION↗
DOE OSTI2018

Printed circuit board for integrated LED driver

A multi-layer metal core printed circuit board (MCPCB) has mounted on it at least one or more heat-generating LEDs and one or more devices configured to provide current to the one or more LEDs. The one or more devices may include a device that carries a steep slope voltage waveform. Since there is typically a very thin dielectric between the patterned copper layer and the metal substrate, the steep slope voltage waveform may produce a current in the metal substrate due to AC coupling via parasitic capacitance. This AC-coupled current may produce electromagnetic interference (EMI). To reduce the EMI, a local shielding area may be formed between the metal substrate and the device carrying the steep slope voltage waveform. The local shielding area may be conductive and may be electrically connected, to a DC voltage node adjacent to the one or more devices.

Song, Zhihua↗
DOE OSTI2020

Cyclic Prefix Direct Sequence Spread Spectrum Capacity Analysis

Cyclic Prefix Direct Sequence Spread Spectrum (CP-DSSS) is a novel waveform that has the potential to solve 5G objectives such as ultra reliable low latency communication (URLLC) and massive machine Type Communication (mMTC). This paper analyzes the capacity of the CP-DSSS waveform in comparison with Orthogonal Frequency Domain Multiplexing OFDM). CP-DSSS can be optimized to achieve the same capacity as OFDM when optimized by the water-filling algorithm. A significant advantage for CP-DSSS is that this capacity can be achieved with all symbols being transmitted with the same effective rate. As a result, stronger forward error correction codes can be used in a CP-DSSS implementation compared to an OFDM implementation with resource block constraints. In addition, the applicability of CP-DSSS as a waveform for a secondary network operating in the same frequency band as the primary network is discussed.

5G and Beyond Communications↗
DOE OSTI2023

Power System Event Detection Using the Energy Detector: A Performance Analysis

As the grid becomes smarter, the need to accurately detect, predict, and classify waveform phenomena is growing. When it comes to detecting high-frequency behaviors, i.e. transients, it is especially important to employ an event detection system that is able to accurately uncover these types of disturbances that would otherwise be lost with traditional hardware. In this paper, we first present the energy detector; a waveform event detection system that adaptively monitors a signal's energy and picks out high-frequency events that deviate from the nominal state. Secondly, we evaluate the performance of this detector against waveform data that have been corrupted by sensor irregularities. Using Oak Ridge National Laboratory's sensor testbed, we are able to show the results of the detector's performance against events that have been corrupted by three distinct sensor types, and examine how these results change with multiple trials. The results show excellent performance when detecting the beginning of an anomalous event with an average of less than 1% error.

Ekti, Ali Riza↗
DOE OSTI2016

Creep-Fatigue Life Prediction of Alloy 617 at 950 deg. C using an Effective Hold Time Approach - 18511

Time Fraction Rule for calculating creep damage fraction is suitable for predicting creep-fatigue life of Alloy 617 at 950 deg. C. However, purely strain-controlled loading waveforms cannot produce creep-dominant interaction due to rapid stress-relaxation of Alloy 617. This study employs a novel loading profile with a combination of strain and force-control to produce varying proportions of creep and fatigue damage. The Time Fraction Rule is found to be inaccurate for life prediction for this novel loading waveform. A new method for calculating the creep damage fraction is proposed with the objective of predicting creep-fatigue life for traditional purely strain-controlled and novel hybrid control loading waveforms. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2025

Remote Instrumentation and Data Acquisition: An Internship Research Report

This report outlines the development and implementation of a remote data acquisition system for waveform analysis using a Rohde & Schwarz oscilloscope. The project involved capturing waveform data, and transferring it to a local machine for visualization and analysis. The core logic was developed in C++ with a focus on object oriented programming and the use of polymorphism so the main application can interact with any instrument without knowing its exact type, simplifying the overall logic and making it easier to add or swap out components without changing the rest of the codebase.. The system issues Standard Commands for Programmable Instruments (SCPI) via a socket connection and parses the oscilloscope’s ASCII waveform data. The C++ application was containerized using Docker for ease of portability, and reproducibility. Emphasis was placed on secure networking practices, error handling, and effective data capture. The report describes the technical steps taken, challenges encountered, and lessons learned, providing insight into the practical integration of hardware interfacing with remote computational environments.

Parikh, Jaymil [Fermilab]↗
DOE OSTI2026

Long-term stability-degradation analysis of DUNE SiPMs in Liquid Nitrogen

We developed a cryogenic photon readout system to monitor arrays of DUNE SiPMs operating at various over-voltages in liquid nitrogen (LN2) for over three months. Photoelectron signals were read out simultaneously via weak capacitive coupling to the micro-FEMB, a 32-channel charge sensitive readout board designed for 77 K to 300 K operation in liquid argon time projection chambers (LAr-TPCs). A waveform snippet acquisition scheme was implemented to capture waveform signals whenever they exceeded a predetermined trigger level; consequently, empty waveforms were discarded. Selected SiPM parameters were monitored to detect any deviations beyond statistical fluctuations. While some parameters exhibited ~1σ variations over the 3-month test period, there was no evidence of drift being enhanced when operating at 4 V or 5 V compared to a 3 V over-voltage. However, a discernible PDE drop was observed across all channels, which warrants further investigation. In addition, we demonstrated that our system can simultaneously read out single photons from a selected group of SiPMs at room temperature.

Tsang, Thomas [Brookhaven]↗