Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wake model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

A viscous vortex lattice method for analysis of cross-flow propellers and turbines

Marine hydrokinetic turbines are a promising source of renewable energy, but the costs of existing cross-flow turbine designs are too high. In order to develop new designs with reduced costs, there exists a need for a low-order computational model that is simultaneously fast, accurate, and robust. In this report we present a novel theoretical model for the analysis of cross-flow propellers and turbines based on the vortex lattice method (VLM). In order to overcome the limitation that the VLM ignores viscous effects (such as trailing-edge flow separation), we present a novel method to account for viscous-thickness-load coupling (VTLC). In order to overcome the difficulty that wake passages cause the VLM to be unstable, we present the panel-averaged induced velocity for the influence of wake vortices on the blades. Herein, we describe our model and provide verification versus RANS CFD. Results show that our VLM + VTLC model predictions are three times more accurate than prior low-order models (i.e. three times lower root mean square error to high-fidelity RANS results) yet 10,000 times faster than RANS over a wide range of operating conditions.

16 TIDAL AND WAVE POWER↗

FLASC (FLORIS-based Analysis for SCADA data)

FLASC provides a rich suite of analysis tools for SCADA data filtering & analysis, wind farm model validation, field experiment design, and field experiment monitoring. The repository is centrally built around NRELs in-house floris wind farm model, available at https://github.com/nrel/floris. FLASC also largely relies on the energy ratio to, among others, quantify wake losses in synthetic and historical data, to perform turbine northing calibrations, and for model parameter estimation.

Fleming, Paul↗

Decay of far flow field in trailing vortices

A finite difference machine code is used in the wake vortex problems in the quasi-cylindrical boundary layer approximation. A turbulent energy model containing new features is developed that accounts for the major effects disclosed by more advanced models in which the parameters are not yet established. Several puzzles that arose in previous theoretical investigations of wake vortices are resolved.

Baldwin, B. S.↗

Systematic study of Reynolds stress closure models in the computations of plane channel flows

The roles of pressure-strain and turbulent diffusion models in the numerical calculation of turbulent plane channel flows with second-moment closure models are investigated. Three turbulent diffusion and five pressure-strain models are utilized in the computations. The main characteristics of the mean flow and the turbulent fields are compared against experimental data. All the features of the mean flow are correctly predicted by all but one of the Reynolds stress closure models. The Reynolds stress anisotropies in the log layer are predicted to varying degrees of accuracy (good to fair) by the models. None of the models could predict correctly the extent of relaxation towards isotropy in the wake region near the center of the channel. Results from the directional numerical simulation are used to further clarify this behavior of the models.

Demuren, A. O.↗

Perspective - Systematic study of Reynolds stress closure models in the computations of plane channel flows

The roles of pressure-strain and turbulent diffusion models in the numerical calculation of turbulent plane channel flows with second-moment closure models are investigated. Three turbulent diffusion and five pressure-strain models are utilized in the computations. The main characteristics of the mean flow and the turbulent fields are compared against experimental data. All the features of the mean flow are correctly predicted by all but one of the Reynolds stress closure models. The Reynolds stress anisotropies in the log layer are predicted to varying degrees of accuracy (good to fair) by the models. None of the models could predict correctly the extent of relaxation towards isotropy in the wake region near the center of the channel. Results from the directional numerical simulation are used to further clarify this behavior of the models.

Demuren, A. O.↗

Unsteady wake effects on progressing/regressing forced rotor flapping modes.

A two bladed 16 inch hingeless rotor model was built and tested outside and inside a 24 by 24 inch wind tunnel test section at collective pitch settings up to 5 deg and rotor advance ratios up to .4. The rotor model has a simple excentric mechanism to provide progressing or regressing cyclic pitch excitation. The flapping responses were compared to analytically determined responses which included flap-bending elasticity but excluded rotor wake effects. Substantial systematic deviations of the measured responses from the computed responses were found, which were interpreted as the effects of interaction of the blades with a rotating asymmetrical wake.

Hohenemser, K. H.↗

Analysis of Wake VAS Benefits Using ACES Build 3.2.1: VAMS Type 1 Assessment

The FAA and NASA are currently engaged in a Wake Turbulence Research Program to revise wake turbulence separation standards, procedures, and criteria to increase airport capacity while maintaining or increasing safety. The research program is divided into three phases: Phase I near term procedural enhancements; Phase II wind dependent Wake Vortex Advisory System (WakeVAS) Concepts of Operations (ConOps); and Phase III farther term ConOps based on wake prediction and sensing. The Phase III Wake VAS ConOps is one element of the Virtual Airspace Modelling and Simulation (VAMS) program blended concepts for enhancing the total system wide capacity of the National Airspace System (NAS). This report contains a VAMS Program Type 1 (stand-alone) assessment of the expected capacity benefits of Wake VAS at the 35 FAA Benchmark Airports and determines the consequent reduction in delay using the Airspace Concepts Evaluation System (ACES) Build 3.2.1 simulator.

Smith, Jeremy C.↗

Modeling Two-Stage Bunch Compression With Wakefields: Macroscopic Properties And Microbunching Instability

In a two-stage compression and acceleration system, where each stage compresses a chirped bunch in a magnetic chicane, wakefields affect high-current bunches. The longitudinal wakes affect the macroscopic energy and current profiles of the compressed bunch and cause microbunching at short wavelengths. For macroscopic wavelengths, impedance formulas and tracking simulations show that the wakefields can be dominated by the resistive impedance of coherent edge radiation. For this case, we calculate the minimum initial bunch length that can be compressed without producing an upright tail in phase space and associated current spike. Formulas are also obtained for the jitter in the bunch arrival time downstream of the compressors that results from the bunch-to-bunch variation of current, energy, and chirp. Microbunching may occur at short wavelengths where the longitudinal space-charge wakes dominate or at longer wavelengths dominated by edge radiation. We model this range of wavelengths with frequency-dependent impedance before and after each stage of compression. The growth of current and energy modulations is described by analytic gain formulas that agree with simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Wake Geometry Effects on Rotor Blade-Vortex Interaction Noise Directivity

Acoustic measurements from a model rotor wind tunnel test are presented which show that the directionality of rotor blade vortex interaction (BVI) noise is strongly dependent on the rotor advance ratio and disk attitude. A rotor free wake analysis is used to show that the general locus of interactions on the rotor disk is also strongly dependent on advance ratio and disk attitude. A comparison of the changing directionality of the BVI noise with changes in the interaction locations shows that the strongest noise radiation occurs in the direction of motion normal to the blade span at the time of interaction, for both advancing and retreating side BVI. For advancing side interactions, the BVI radiation angle down from the tip-path plane appears relatively insensitive to rotor operating condition and is typically between 40 and 55 deg below the disk. However, the azimuthal radiation direction shows a clear trend with descent speed, moving towards the right of the flight path with increasing descent speed. The movement of the strongest radiation direction is attributed to the movement of the interaction locations on the rotor disk with increasing descent speed.

Martin, R. M.↗

Blunt body near wake flow field at Mach 6

Tests were conducted in a Mach 6 flow to examine the reattachment process of an axisymmetric free shear layer associated with the near wake of a 70 deg. half angle, spherically blunted cone with a cylindrical after body. Model angle of incidence was fixed at 0 deg. and free-stream Reynolds numbers based on body diameter ranged from 0.5 x 10(exp 6) to 4 x 10(exp 6). The sensitivity of wake shear layer transition on reattachment heating was investigated. The present perfect gas study was designed to compliment results obtained previously in facilities capable of producing real gas effects. The instrumented blunted cone model was designed primarily for testing in high enthalpy hypervelocity shock tunnels in both this country and abroad but was amenable for testing in conventional hypersonic blowdown wind tunnels as well. Surface heating rates were inferred from temperature - time histories from coaxial surface thermocouples on the model forebody and thin film resistance gages along the model base and cylindrical after body. General flow feature (bow shock, wake shear layer, and recompression shock) locations were visually identified by schlieren photography. Mean shear layer position and growth were determined from intrusive pitot pressure surveys. In addition, wake surveys with a constant temperature hot-wire anemometer were utilized to qualitatively characterize the state of the shear layer prior to reattachment. Experimental results were compared to laminar perfect gas predictions provided by a 3-D Navier Stokes code (NSHYP). Shear layer impingement on the instrumented cylindrical after body resulted in a localized heating maximum that was 21 to 29 percent of the forebody stagnation point heating. Peak heating resulting from the reattaching shear layer was found to be a factor of 2 higher than laminar predictions, which suggested a transitional shear layer. Schlieren flow visualization and fluctuating voltage time histories and spectra from the hot wire surveys across the shear layer substantiate this observation. The sensitivity of surface heating to forebody roughness was characterized for a reattaching shear layer. For example, at R(sub infinity), d = 4 x 10(exp 6), when the shear layer was transitional, the magnitude of peak heating from shear layer impingement was reduced by approximately 24 percent when transition grit was applied to the forebody. The spatial location of the local peak, however, remained unchanged.

Horvath, Thomas J.↗

Direct Numerical Simulations of Boundary Layer Transition on a Flat Plate

In recent years the techniques of computational fluid dynamics (CFD) have been used to compute flows associated with geometrically complex configurations. However, success in terms of accuracy and reliability has been limited to cases where the effects of turbulence and transition could be modeled in a straightforward manner. Even in simple flows, the accurate computation of skin friction and heat transfer using existing turbulence models has proved to be a difficult task, one that has required extensive fine-tuning of the turbulence models used. In more complex flows (for example, in turbomachinery flows in which vortices and wakes impinge on airfoil surfaces causing periodic transitions from laminar to turbulent flow) the development of a model that accounts for all scales of turbulence and predicts the onset of transition is an extremely difficult task. Fortunately, current trends in computing suggest that it may be possible to perform direct simulations of turbulence and transition at moderate Reynolds numbers in some complex cases in the near future. This presentation will focus on direct simulations of transition and turbulence using high-order accurate finite-difference methods. The advantage of the finite-difference approach over spectral methods is that complex geometries can be treated in a straightforward manner. Additionally, finite-difference techniques are the prevailing methods in existing application codes. An application of high-order-accurate finite-difference methods to direct simulations of transition and turbulence in a spatially evolving boundary layer subjected to high levels of freestream turbulence will be presented.

Rai, Man Mohan↗

Direct Simulations of Transition and Turbulence Using High-Order Accurate Finite-Difference Schemes

In recent years the techniques of computational fluid dynamics (CFD) have been used to compute flows associated with geometrically complex configurations. However, success in terms of accuracy and reliability has been limited to cases where the effects of turbulence and transition could be modeled in a straightforward manner. Even in simple flows, the accurate computation of skin friction and heat transfer using existing turbulence models has proved to be a difficult task, one that has required extensive fine-tuning of the turbulence models used. In more complex flows (for example, in turbomachinery flows in which vortices and wakes impinge on airfoil surfaces causing periodic transitions from laminar to turbulent flow) the development of a model that accounts for all scales of turbulence and predicts the onset of transition may prove to be impractical. Fortunately, current trends in computing suggest that it may be possible to perform direct simulations of turbulence and transition at moderate Reynolds numbers in some complex cases in the near future. This seminar will focus on direct simulations of transition and turbulence using high-order accurate finite-difference methods. The advantage of the finite-difference approach over spectral methods is that complex geometries can be treated in a straightforward manner. Additionally, finite-difference techniques are the prevailing methods in existing application codes. In this seminar high-order-accurate finite-difference methods for the compressible and incompressible formulations of the unsteady Navier-Stokes equations and their applications to direct simulations of turbulence and transition will be presented.

Rai, Man Mohan↗

Direct Numerical Simulations of Boundary Layer Transition on a Flat Plate

In recent years the techniques of computational fluid dynamics (CFD) have been used to compute flows associated with geometrically complex configurations. However, success in terms of accuracy and reliability has been limited to cases where the effects of turbulence and transition could be modeled in a straightforward manner. Even in simple flows, the accurate computation of skin friction and heat transfer using existing turbulence models has proved to be a difficult task, one that has required extensive fine-tuning of the turbulence models used. In more complex flows (for example, in turbomachinery flows in which vortices and wakes impinge on airfoil surfaces causing periodic transitions from laminar to turbulent flow) the development of a model that accounts for all scales of turbulence and predicts the onset of transition is an extremely difficult task. Fortunately, current trends in computing suggest that it may be possible to perform direct simulations of turbulence and transition at moderate Reynolds numbers in some complex cases in the near future. This presentation will focus on direct simulations of transition and turbulence using high-order accurate finite-difference methods. The advantage of the finite-difference approach over spectral methods is that complex geometries can be treated in a straightforward manner. Additionally, finite-difference techniques are the prevailing methods in existing application codes. An application of accurate finite-difference methods to direct simulations of transition and turbulence in a spatially evolving boundary layer subjected to high levels of freestream turbulence will be presented.

Rai, Man Mohan↗

Martian crater dark streak lengths - Explanation from wind tunnel experiments

The mechanism determining the length of dark erosional (type-Id) streaks near craters and hills on the surface of Mars is investigated using Mariner-9 images and the results of wind-tunnel studies (Greeley et al., 1974; Iversen et al., 1975 and 1976). An empirical model of time-dependent growth of crater-wake streaks in the downwind direction involving deflation by sand-grain saltation is developed and shown to give relatively good agreement with streak growth rates observed over a 38-day period of Mariner observations and with the streak-length/crater-diameter and streak-length/crater-height ratios analyzed statistically by Lee (1984). This time-dependent mechanism is thus considered a reasonable alternative (for dark streaks) to the blocking model proposed by Lee for both bright and dark streaks. Preliminary analysis of further wind-tunnel experiments (Iversen et al., 1982) supports the blocking model of bright-streak formation.

Iversen, J. D.↗

Extended Glauert tip correction to include vortex rollup effects

Wind turbine loads predictions by blade-element momentum theory using the standard tip-loss correction have been shown to over-predict loading near the blade tip in comparison to experimental data. This over-prediction is theorized to be due to the assumption of light rotor loading, inherent in the standard tip-loss correction model of Glauert. A higher- order free-wake method, WindDVE , is used to compute the rollup process of the trailing vortex sheets downstream of wind turbine blades. Results obtained serve an exact correction function to the Glauert tip correction used in blade-element momentum methods. Lastly, it is found that accounting for the effects of tip vortex rollup within the Glauert tip correction indeed results in improved prediction of blade tip loads computed by blade-element momentum methods.

17 WIND ENERGY↗

AMR-Wind [SWR-20-85]

AMR-Wind is a massively parallel, block-structured adaptive-mesh, incompressible flow solver for wind turbine and wind farm simulations. The solver is built on top of the AMReX library. AMReX is developed at LBNL , NREL , and ANL as part of the Block-Structured AMR Co-Design Center in DOE's Exascale Computing Project. AMReX library provides the mesh data structures, mesh adaptivity, as well as the linear solvers used for solving the governing equations. The primary applications for AMR-Wind are: performing large-eddy simulations (LES) of atmospheric boundary layer (ABL) flows, simulating wind farm turbine-wake interactions using actuator disk or actuator line models for turbines, and as a background solver when coupled with a near-body solver with overset methodology to perform blade-resolved simulations of multiple wind turbines within a wind farm.

Ananthan, Shreyas↗

kynema-sgf [SWR-20-85]

Kynema-SGF (formerly AMR-Wind), wherein SGF stands for structured-grid fluid dynamics, is a massively parallel, block-structured adaptive-mesh, incompressible flow solver. The codebase was initiated in 2019 from incflo. The solver is built on top of the AMReX library. AMReX library provides the mesh data structures, mesh adaptivity, as well as the linear solvers used for solving the governing equations. Kynema-SGF is actively developed and maintained by a dedicated multi-institutional team from Lawrence Berkeley National Laboratory, National Laboratory of the Rockies, and Sandia National Laboratories. The primary applications for Kynema-SGF are: performing large-eddy simulations (LES) of atmospheric boundary layer (ABL) flows, simulating wind farm turbine-wake interactions using actuator disk or actuator line models for turbines, and as a background solver when coupled with a near-body solver (e.g., Kynema-UGF) with overset methodology to perform blade-resolved simulations of multiple wind turbines within a wind farm. For offshore applications, the ability to model the air-sea interaction effects and its impact on the ABL characteristics is another focus for the code development effort. As with other codes in the Kynema ecosystem, Kynema-SGF shares the following objectives: *an open, well-documented implementation of the state-of-the-art computational models for modeling wind farm flow physics at various fidelities that are backed by a comprehensive verification and validation (V&V) process; *be capable of performing the highest-fidelity simulations of flow fields within wind farms; and *be able to leverage the high-performance leadership class computing facilities available at DOE national laboratories.

Ananthan, Shreyas↗