Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vibration analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Mössbauer Studies and Magnetic Properties of Cubic CuFe{sub 2}O{sub 4} Nanoparticles

This study reports the preparation and characterization of nanocrystalline spinel powder of cubic copper ferrite nanoparticles (NPs) which have been fabricated via a cost-effective citrate sol–gel approach. The structural and morphological properties of the nanoparticles are analyzed by X-ray diffraction (XRD), Fourier transform spectroscopy (FT-IR), and scanning electron microscopy (SEM) whereas magnetic properties and Mössbauer analysis were performed using vibrating sample magnetometer (VSM) and Mössbauer spectra, respectively, and were characterized in detail. The empirical aim of this study is to perceive the transition phase of CuFe{sub 2}O{sub 4} as cubic symmetry which was confirmed by SEM images, and a couple of studies reported on the cubic structure of copper ferrite and discussed the magnetic properties. However, the present study gives the detailed information of the formation of cubic structure and magnetic behavior of the CuFe{sub 2}O{sub 4} cubic structure. X-ray diffraction measurements of resulting NPs show that the grain size of the particles is about 42.08 nm while SEM analysis showed that the particles have cubic nanostructured shapes with non-homogeneous sizes in around 80–100 nm. From {sup 57}Fe, Mössbauer parameters consist of one superparamagnetic doublet and superposition of four sextets. VSM result shows the enhanced superparamagnetic nature of the CuFe{sub 2}O{sub 4} NPs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Integrated Vehicle Ground Vibration Testing in Support of NASA Launch Vehicle Loads and Controls Analysis

The National Aeronautics and Space Administration (NASA) Ares Projects Office (APO) is continuing to make progress toward the final design of the Ares I crew launch vehicle and Ares V cargo launch vehicle. Ares I and V will form the space launch capabilities necessary to fulfill NASA's exploration strategy of sending human beings to the Moon, Mars, and beyond. As with all new space vehicles there will be a number of tests to ensure the design can be Human Rated. One of these is the Integrated Vehicle Ground Vibration Test (IVGVT) that will be measuring responses of the Ares I as a system. All structural systems possess a basic set of physical characteristics unique to that system. These unique characteristics include items such as mass distribution, frequency and damping. When specified, they allow engineers to understand and predict how a structural system like the Ares I launch vehicle behaves under given loading conditions. These physical properties of launch vehicles may be predicted by analysis or measured through certain types of tests. Generally, these properties are predicted by analysis during the design phase of a launch vehicle and then verified through testing before the vehicle is Human Rated. The IVGVT is intended to measure by test the fundamental dynamic characteristics of Ares I during various phases of operational/flight. This testing includes excitations of the vehicle in lateral, longitudinal, and torsional directions at vehicle configurations representing different trajectory points. During the series of tests, properties such as natural frequencies, mode shapes, and transfer functions are measured directly. These data will then be used to calibrate loads and Guidance, Navigation, and Controls (GN&C) analysis models for verifying analyses of Ares I. NASA launch vehicles from Saturn to Shuttle have undergone Ground Vibration Tests (GVTs) leading to successful launch vehicles. A GVT was not performed on the unmanned Delta III. This vehicle was lost during launch. Subsequent analyses indicated that had a GVT been conducted on the vehicle, problems with vehicle modes and control may have been discovered and corrected, avoiding loss of the vehicle/mission. This paper will address GVT planning, set-up, conduction and analyses, for the Saturn and Shuttle programs, and also focus on the current and on-going planning for the Ares I and V IVGVT.

Tuma, Margaret L.↗

Spectroscopic study on deuterated benzenes. I. Microwave spectra and molecular structure in the ground state

We observed microwave absorption spectra of some deuterated benzenes and accurately determined the rotational constants of all H/D isotopomers in the ground vibrational state. Using synthetic analysis assuming that all bond angles are 120°, the mean bond lengths were obtained to be r{sub 0}(C–C) = 1.3971 Å and r{sub 0}(C–H) = r{sub 0}(C–D) = 1.0805 Å. It has been concluded that the effect of deuterium substitution on the molecular structure is negligibly small and that the mean bond lengths of C–H and C–D are identical unlike small aliphatic hydrocarbons, in which r{sub 0}(C–D) is about 5 mÅ shorter than r{sub 0}(C–H). It is considered that anharmonicity is very small in the C–H stretching vibration of aromatic hydrocarbons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Vibrational control of the reaction pathway in the H + CHD 3 → H 2 + CD 3 reaction

An accurate full-dimensional quantum state-to-state simulation of the six-atom title reaction based on first-principles theory is reported. Counterintuitive effects are found: Increasing the energy in the reactant’s CD 3 umbrella vibration reduces the energy in the corresponding product vibration. An in-depth analysis reveals the crucial role of the effective dynamical transition state: Its geometry is controlled by the vibrational states of the reactants and subsequently controls the quantum state distribution of the products. This finding enables generalizing the concept of transition state control of chemical reactions to the quantum state–specific level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Application of adaptive trusses to vibration isolation in flexible structures

It is shown through analysis that force feedback can be used to provide complete vibration isolation in two directions. Simultations were carried out to demonstrate the use of two control methods applied to an adaptive truss as an active mount. The first technique was simple force feedback with a gain. This method has the potential to provide excellent vibration isolation performance. It requires no model of the system and no knowledge of the applied disturbance, and is easily implemented in an adaptive truss. There is some question as to how high the gain can be allowed to go but the experimental results have shown performance advantages over passive techniques even for small gains. The second technique presented is the LQR method, with disturbance modeling. A method is presented for using the LQR method for vibration isolation with the intention of achieving performance with guaranteed stability and relatively lower loop gains. The overhead for those benefits is an accurate system model. It was shown analytically that this method works; however, the performance is not as good as expected. It is believed that the difference in performance is partly due to an increase in active damping which is inadvertently provided by the LQR method.

Clark, William W.↗

Synthesis, Crystal Structure, Hirshfeld Surface Analysis, and Physicochemical Study of an Anhydrous Organic Acidic Cyclohexaphosphate

The new organic–inorganic hybrid [5-Cl-2-(CH{sub 3})C{sub 6}H{sub 3}NH{sub 3}]{sub 4}H{sub 2}P{sub 6}O{sub 18} has been synthesized by the slow evaporation method. X-ray diffraction on a single crystal shows that this acidic cyclohexaphosphate crystallized in the monoclinic space group C{sub 2/c} with a = 33.89(11) Å, b = 9.16(16) Å, c = 13.68(3) Å, β = 91.35(2)°, V = 4244.9(19) Å{sup 3} and Z = 4. {sup 31}P MAS-NMR and {sup 13}C CP/MAS-NMR results are in accordance with X-ray findings. Fluorescent study shows the blue photoluminescence. Furthermore, FT-IR analysis was studied and the complete vibrational assignments were done. Intermolecular interactions were analyzed using Hirshfeld surface analysis and the associated 2D fingerprint plots.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic Structure of Six-Coordinate Iron(III)−Porphyrin NO Adducts: The Elusive Iron(III)−NO(radical) State and Its Influence on the Properties of These Complexes

This paper investigates the interaction between five-coordinate ferric hemes with bound axial imidazole ligands and nitric oxide (NO). The corresponding model complex, [Fe(TPP)(MI)(NO)](BF{sub 4}) (MI = 1-methylimidazole), is studied using vibrational spectroscopy coupled to normal coordinate analysis and density functional theory (DFT) calculations. In particular, nuclear resonance vibrational spectroscopy is used to identify the Fe-N(O) stretching vibration. The results reveal the usual Fe(II)-NO{sup +} ground state for this complex, which is characterized by strong Fe-NO and N-O bonds, with Fe-NO and N-O force constants of 3.92 and 15.18 mdyn/{angstrom}, respectively. This is related to two strong {pi} back-bonds between Fe(II) and NO{sup +}. The alternative ground state, low-spin Fe(III)-NO(radical) (S = 0), is then investigated. DFT calculations show that this state exists as a stable minimum at a surprisingly low energy of only 1--3 kcal/mol above the Fe(II)-NO{sup +} ground state. In addition, the Fe(II)-NO{sup +} potential energy surface (PES) crosses the low-spin Fe(III)-NO(radical) energy surface at a very small elongation (only 0.05--0.1 {angstrom}) of the Fe-NO bond from the equilibrium distance. This implies that ferric heme nitrosyls with the latter ground state might exist, particularly with axial thiolate (cysteinate) coordination as observed in P450-type enzymes. Importantly, the low-spin Fe(III)-NO(radical) state has very different properties than the Fe(II)-NO{sup +} state. Specifically, the Fe-NO and N-O bonds are distinctively weaker, showing Fe-NO and N-O force constants of only 2.26 and 13.72 mdyn/{angstrom}, respectively. The PES calculations further reveal that the thermodynamic weakness of the Fe-NO bond in ferric heme nitrosyls is an intrinsic feature that relates to the properties of the high-spin Fe(III)-NO(radical) (S = 2) state that appears at low energy and is dissociative with respect to the Fe-NO bond. Altogether, release of NO from a six-coordinate ferric heme nitrosyl requires the system to pass through at least three different electronic states, a process that is remarkably complex and also unprecedented for transition-metal nitrosyls. These findings have implications not only for heme nitrosyls but also for group-8 transition-metal(III) nitrosyls in general.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic Structure of Six-Coordinate Iron(III)-Porphyrin NO Adducts: the Elusive Iron(III)-NO(Radical) State And Its Influence on the Properties of These Complexes

This paper investigates the interaction between five-coordinate ferric hemes with bound axial imidazole ligands and nitric oxide (NO). The corresponding model complex, [Fe(TPP)(MI)(NO)](BF{sub 4}) (MI = 1-methylimidazole), is studied using vibrational spectroscopy coupled to normal coordinate analysis and density functional theory (DFT) calculations. In particular, nuclear resonance vibrational spectroscopy is used to identify the Fe-N(O) stretching vibration. The results reveal the usual Fe(II)-NO{sup +} ground state for this complex, which is characterized by strong Fe-NO and N-O bonds, with Fe-NO and N-O force constants of 3.92 and 15.18 mdyn/{angstrom}, respectively. This is related to two strong - back-bonds between Fe(II) and NO{sup +}. The alternative ground state, low-spin Fe(III)-NO(radical) (S = 0), is then investigated. DFT calculations show that this state exists as a stable minimum at a surprisingly low energy of only 1-3 kcal/mol above the Fe(II)-NO{sup +} ground state. In addition, the Fe(II)-NO{sup +} potential energy surface (PES) crosses the low-spin Fe(III)-NO(radical) energy surface at a very small elongation (only 0.05-0.1 {angstrom}) of the Fe-NO bond from the equilibrium distance. This implies that ferric heme nitrosyls with the latter ground state might exist, particularly with axial thiolate (cysteinate) coordination as observed in P450-type enzymes. Importantly, the low-spin Fe(III)-NO(radical) state has very different properties than the Fe(II)-NO{sup +} state. Specifically, the Fe-NO and N-O bonds are distinctively weaker, showing Fe-NO and N-O force constants of only 2.26 and 13.72 mdyn/{angstrom}, respectively. The PES calculations further reveal that the thermodynamic weakness of the Fe-NO bond in ferric heme nitrosyls is an intrinsic feature that relates to the properties of the high-spin Fe(III)-NO(radical) (S = 2) state that appears at low energy and is dissociative with respect to the Fe-NO bond. Altogether, release of NO from a six-coordinate ferric heme nitrosyl requires the system to pass through at least three different electronic states, a process that is remarkably complex and also unprecedented for transition-metal nitrosyls. These findings have implications not only for heme nitrosyls but also for group-8 transition-metal(III) nitrosyls in general.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced Magneto-optical and Antibacterial Studies of Bi{sub 1−x}Mg{sub x}FeO{sub 3} (0.0 ≤ x ≤ 0.15)) Nanoparticles

Mg-doped BiFeO{sub 3} (Bi{sub 1−x}Mg{sub x}FeO{sub 3} (0.00 ≤ x ≤ 0.15)) nanoparticles (NPs) have been successfully prepared by simple solution combustion method using urea as fuel. The obtained product was sintered at 550 °C for 2 h to get pure-phase formation. The as-prepared samples were characterized by powder X-ray diffraction (XRD), Fourier transform infrared (FT-IR), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscope (TEM), ultraviolet–visible (UV-Vis) absorption, photoluminescence (PL) spectra, and vibrating sample magnetometer (VSM) analysis. Powder XRD study revealed that all products exhibit rhombohedral structure with pure-phase formation. The average crystallite size of the samples decreased from 56.25 to 46.15 nm with increasing the concentration of Mg (x = 0.00, 0.05, 0.10, and 0.15). Surface morphology of the samples were analyzed by FE-SEM and TEM micrograph techniques, and the grain distribution was not quite homogeneous and observed agglomeration of the particles, which is mainly due to the magnetic interaction among them. EDX analysis confirmed the presence of Bi, Fe, O, and Mg elements without any form of impurity peak in all products. PL spectra shows a high intense peak at 464 nm, which is attributed to blue emission. The saturation magnetization is enhanced with increasing Mg doping level at RT. Antibacterial activity of Bi{sub 1−x}Mg{sub x}FeO{sub 3} NPs was found to be enhanced with increase in Mg doping concentration as it causes a reduction in the grain size of the samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Designed synthesis of multifunctional Fe{sub 3}O{sub 4}@SiO{sub 2}–NH{sub 2}@CS–Co(II) towards efficient oxidation of ethylbenzene

Highlights: • Cooperative integration of magnetic cores and chitosan layers. • Efficient and durable catalyst for the oxidation of ethylbenzene to acetophenone. • Exceptional results of 82.5% EB conversion and 80.4% AP selectivity. • Magnetic recoverable catalyst with excellent reusability even after 10 times run. - Abstract: The preparation of Co(II) supported magnetic heterogeneous catalyst, i.e. Fe{sub 3}O{sub 4}@SiO{sub 2}–NH{sub 2}@CS–Co, and its efficient and selective catalytic properties toward the oxidation of ethylbenzene to acetophenone are presented. The materials were characterized by various physicochemical techniques such as scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, vibrating sample magnetometer, elemental analysis, inductively coupled plasma-atomic emission spectrometer and X-ray photoelectron spectroscopy, etc. The reaction conditions were thoroughly investigated and highly improved catalytic performance (82.5% conversion of ethylbenzene and 80.1% selectivity to acetophenone) was gained under more mild reaction conditions of lower temperature (70 °C), shorter reaction period (60 min) and cheaper and greener oxygen source (H{sub 2}O{sub 2}). More importantly, it could be reused successively at least 10 times when more than 80% of its catalytic activity maintained.

36 MATERIALS SCIENCE↗

Structural Analysis Of General Shells (STAGS)

STAGS models complex thin shell structures including separate shell branches or segments connected along their boundaries. Options include static stress and vibration, transient, and bifurcation buckling analysis. Also useful for submarine design.

Almroth, B. O.↗

Flight Flutter Testing of the P6M

On the P6M the shake behavior, i.e., the response to random excitation at subcritical speeds of lowly damped airplane modes, is as important as the actual flutter speed. The approach is to first study the problem by means of analyses and wind-tunnel tests. These predictions are compared with flight test data obtained by spectral analysis of tape recordings of the airplane vibration responses to random aerodynamic turbulence. A similar spectrum analysis approach was used in high speed wind-tunnel tests. A resonance excitation technique was developed for low speed wind-tunnel testing, and well defined V-g curves were obtained. The effect of various parameters on both shake and flutter of T-tails with and without dihedral were studied. Preliminary flight tests yielded good correlation; they also yielded interesting information concerning a low frequency transonic snaking mode, and excitation by shed vortices.

Kachadourian, G.↗

Parametric and experimental analysis using a power flow approach

Having defined and developed a structural power flow approach for the analysis of structure-borne transmission of structural vibrations, the technique is used to perform an analysis of the influence of structural parameters on the transmitted energy. As a base for comparison, the parametric analysis is first performed using a Statistical Energy Analysis approach and the results compared with those obtained using the power flow approach. The advantages of using structural power flow are thus demonstrated by comparing the type of results obtained by the two methods. Additionally, to demonstrate the advantages of using the power flow method and to show that the power flow results represent a direct physical parameter that can be measured on a typical structure, an experimental investigation of structural power flow is also presented. Results are presented for an L-shaped beam for which an analytical solution has already been obtained. Furthermore, the various methods available to measure vibrational power flow are compared to investigate the advantages and disadvantages of each method.

Cuschieri, J. M.↗

Improvements in electrical and dielectric properties of substituted multiferroic LaMnO{sub 3} based nanostructures synthesized by co-precipitation method

Graphical abstract: Display Omitted Highlights: ► Simultaneous double ion substitutions philosophy is introduced in LaMnO{sub 3}. ► La{sub 1−x}Gd{sub x}Mn{sub 1−y}Cr{sub y}O{sub 3} nanoparticles are not reported previously. ► La{sub 1−x}Gd{sub x}Mn{sub 1−y}Cr{sub y}O{sub 3} nanoparticles are synthesized by co-precipitation method. ► The 12 fold increase in resistivity of LaMnO{sub 3} nanostructures is observed. -- Abstract: A series of La{sub 1−x}Gd{sub x}Mn{sub 1−y}Cr{sub y}O{sub 3} nanoparticles (where x, y = 0, 0.25, 0.50, 0.75 and 1.0) has been synthesized by the chemical co-precipitation method, involving double ion substitution philosophy. The nanoparticles were characterized by thermo gravimetric analysis (TGA), X-ray fluorescence spectrometry (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, vibrating sample magnetometer (VSM), DC electrical resistivity and dielectric measurements. The XRD and FTIR analysis confirmed the single orthorhombic phase and the crystallite size were found in the range of 16–34 nm. DC resistivity exhibited very interesting behavior which increased from 1.41 × 10{sup 8} to 16.35 ± 0.2 × 10{sup 8} Ω cm upon complete double ions replacement of La and Mn with Gd and Cr, respectively. This very high resistivity variation upon substitution definitely would open new avenues for applications of these materials in microwave devices and other related areas. The dielectric properties of these nanoparticles were also studied at room temperature in the range of 6 kHz to 5 MHz and the maximum dielectric behavior (ε′ = 2.86 × 10{sup 3}, tan δ = 5.41, ε″ = 15.5 × 10{sup 3}) was exhibited by La{sub 0.75}Gd{sub 0.25}Mn{sub 0.75}Cr{sub 0.25}O{sub 3} at 6 kHz. Hysteresis loops measurements showed that the synthesized nanomaterials are paramagnetic in nature at room temperature.

36 MATERIALS SCIENCE↗

Effects of Sintering Temperature on Structural, Morphological and Magnetic Properties of Strontium Ferrite Nanoparticles

In the present investigation, structural, morphological and magnetic properties of SrFe{sub 2}O{sub 4} ferrite nanoparticles prepared by a sol–gel method were studied. The techniques used in this investigation were thermogravimetric analysis/differential thermal analysis (TGA/DTA), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), field emission scanning electron microscopy (FESEM), Fourier transform infrared spectrometry (FT-IR), vibrating sample magnetometry (VSM) and Curie temperature analysis. The average crystallite sizes of the SrFe{sub 2}O{sub 4} were calculated using the Scherrer formula and found in the range of 11–22 nm, and this can be attributed to the grain growth of the particles. The lattice parameter of SrFe{sub 2}O{sub 4} nanoparticles decreased from 6.64 to 6.51 nm as the sintering temperature was raised from 600 to 900 °C. FT-IR analysis confirmed that bands in the range 430–590 cm{sup − 1} are due to the stretching vibration of oxygen atom and metal ions (M–O) that is Fe–O confirming the formation of spinel ferrite. Surface morphology of the samples has been studied using FESEM. The elemental composition along with their relative ratios was given by EDX and was found to be in agreement with their initial calculated values. The saturation magnetization, magnetic coercivity and remanence increase with an increasing sintering temperature from 600 to 900 °C. The present study reports the Curie temperature with an amount of 551 °C of the synthesized strontium nanoferrites using the Faraday technique.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Vibrations of Elastic Shells of Revolution Partially Filled with Ideal Liquid

We propose an algorithm for the numerical analyses of vibrations of elastic shells of revolution partially filled with ideal incompressible liquids. In the solution of this problem, the wave motions of liquid on its free surface are taken into account. The solution of the problem of hydroelasticity is based on the application of the method of decomposition of the domain of integration of equations of the theory of shells with the use of the variational statement of the problem and on the approximate construction of the operator inverse to the operator of the hydrodynamic part of the problem. We construct a generalized functional of displacements of the shell for which the role of conditions of matching for the solutions in different subdomains is played by the natural boundary conditions. The obtained numerical results are compared with the existing exact solutions of the analyzed problem for a shell in the form of a straight circular cylinder.

42 ENGINEERING↗