Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “versatile”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Particle Number Concentrations for HI-SCALE Field Campaign Report

In support of the Holistic Interactions of Shallow Clouds, Aerosols, and Ecosystems (HI-SCALE) project to study new particle formation in the atmosphere, a pair of custom water condensation particle counters were provided to the second intensive field campaign, from mid-August through mid-September 2017, at the U.S. Department of Energy Southern Great Plains Atmospheric Radiation Measurement (ARM) Climate Research Facility observatory. These custom instruments were developed by Aerosol Dynamics, Inc. (Hering et al. 2017) to detect particles into the nanometer size range. Referred to as “versatile water condensation particle counter (vWCPC)”, they are water-based, laminar-flow condensational growth instruments whose lower particle size threshold can be set based on user-selected operating temperatures. For HI-SCALE, the vWCPCs were configured to measure airborne particle number concentrations in the size range from approximately 2nm to 2μm. Both were installed in the particle sizing system operated by Chongai Kuang of Brookhaven National Laboratory (BNL). One of these was operated in parallel to a TSI Model 3776, upstream of the mobility particle sizing system, to measure total ambient particle concentrations. The airborne particle concentration data from this “total particle number vWCPC” (Ntot-vWCPC) system has been reported to the ARM database. The data are reported with one-second resolution. The second vWCPC was operated in parallel with the BNL diethylene glycol instrument to count particles downstream of a separate differential mobility size analyzer. Data from this “DMA-vWCPC” system was logged by BNL, and will eventually be provided by that laboratory.

HI-SCALE, aerosol particle number concentration, v↗
DOE OSTI2019

Calculation of Neutron Damage to Sodium Coolant Inlet Plenum

The coolant inlet plenum is a life limiting component of a Sodium-cooled Fast Reactor (SFR). The inlet plenum is a fixed reactor component which receives sodium from the cold side of the sodium pool redan and directs it into the inlet nozzles of the fuel assemblies. Neutron leakage from the reactor core causes irradiation damage to the steel components of the inlet plenum leading to a reduction in strength. The life of the reactor is essentially tied to the acceptable strength degradation of the inlet plenum. Therefore, typical SFR designs employ a neutron reflector/shield as an integral feature of the fuel assembly. The role of the axial reflector/shield is to: 1) direct fast neutrons back to the core, and 2) attenuate the neutron flux to minimize neutron interaction with the inlet plenum. The longer the reflector and the greater the share of steel within the reflector design, the greater the attenuation. The axial reflector is heated by gamma rays from the core, and must have sufficient coolant penetrations to ensure adequate cool-ability. Also, the sodium coolant must pass through the reflector before reaching the fuel rods above it. The present work investigates varying reflector geometries in support of the Versatile Test Reactor (VTR), a SFR research reactor planned to restart fast reactor irradiation capabilities in the U.S. DOE laboratory complex. This work will demonstrate that the neutron damage to the inlet plenum is relatively insensitive to the number and arrangements of coolant channel penetrations through the reflector.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2015

Combined convective and diffusive simulations: VERB-4D comparison with 17 March 2013 Van Allen Probes observations: VERB-4D

Our study focused on understanding the coupling between different electron populations in the inner magnetosphere and the various physical processes that determine evolution of electron fluxes at different energies. Observations during the 17 March 2013 storm and simulations with a newly developed Versatile Electron Radiation Belt-4D (VERB-4D) are presented. This analysis of the drift trajectories of the energetic and relativistic electrons shows that electron trajectories at transitional energies with a first invariant on the scale of ~100 MeV/G may resemble ring current or relativistic electron trajectories depending on the level of geomagnetic activity. Simulations with the VERB-4D code including convection, radial diffusion, and energy diffusion are presented. Sensitivity simulations including various physical processes show how different acceleration mechanisms contribute to the energization of energetic electrons at transitional energies. In particular, the range of energies where inward transport is strongly influenced by both convection and radial diffusion are studied. Our results of the 4-D simulations are compared to Van Allen Probes observations at a range of energies including source, seed, and core populations of the energetic and relativistic electrons in the inner magnetosphere.

58 GEOSCIENCES↗
DOE OSTI2016

Dependence of radiation belt simulations to assumed radial diffusion rates tested for two empirical models of radial transport

Radial diffusion is one of the dominant physical mechanisms that drives acceleration and loss of the radiation belt electrons, which makes it very important for nowcasting and forecasting space weather models. In this paper, we investigate the sensitivity of the two parameterizations of the radial diffusion of Brautigam and Albert (2000) and Ozeke et al. (2014) on long-term radiation belt modeling using the Versatile Electron Radiation Belt (VERB). Following Brautigam and Albert (2000) and Ozeke et al. (2014), we first perform 1-D radial diffusion simulations. Comparison of the simulation results with observations shows that the difference between simulations with either radial diffusion parameterization is small. To take into account effects of local acceleration and loss, we perform 3-D simulations, including pitch angle, energy, and mixed diffusion. We found that the results of 3-D simulations are even less sensitive to the choice of parameterization of radial diffusion rates than the results of 1-D simulations at various energies (from 0.59 to 1.80 MeV). This result demonstrates that the inclusion of local acceleration and pitch angle diffusion can provide a negative feedback effect, such that the result is largely indistinguishable simulations conducted with different radial diffusion parameterizations. Finally, we also perform a number of sensitivity tests by multiplying radial diffusion rates by constant factors and show that such an approach leads to unrealistic predictions of radiation belt dynamics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Investigating Porous Media for Relief Printing Using Micro-Architected Materials

Advances in printed electronics are predicated on the integration of sophisticated printing technologies with functional materials. Although scalable manufacturing methods, such as letterpress and flexographic printing, have significant history in graphic arts printing, functional applications require sophisticated control and understanding of nanoscale transfer of fluid inks. In this paper, a versatile platform is introduced to study and engineer printing forms, exploiting a microscale additive manufacturing process to design micro-architected materials with controllable porosity and deformation. Building on this technology, controlled ink transfer for submicron functional films is demonstrated. The design freedom and high-resolution 3D control afforded by this method provide a rich framework for studying mechanics of fluid transfer for advanced manufacturing processes.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Controlled nanopatterning of a polymerized ionic liquid in a strong electric field

Nanolithography has become a driving force in advancements of the modern day's electronics, allowing for miniaturization of devices and a steady increase of the calculation, power, and storage densities. Among various nanofabrication approaches, scanning probe techniques, including atomic force microscopy (AFM), are versatile tools for creating nanoscale patterns utilizing a range of physical stimuli such as force, heat, or electric field confined to the nanoscale. In this study, the potential of using the electric field localized at the apex of an AFM tip to induce and control changes in the mechanical properties of an ion containing polymer—a polymerized ionic liquid (PolyIL)—on a very localized scale is explored. In particular, it is demonstrated that by means of AFM, one can form topographical features on the surface of PolyIL-based thin films with a significantly lower electric potential and power consumption as compared to nonconductive polymer materials. Lastly,, by tuning the applied voltage and ambient air humidity, control over dimensions of the formed structures is reproducibly achieved.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Penta-Twinned Copper Nanorods: Facile Synthesis via Seed-Mediated Growth and Their Tunable Plasmonic Properties

When seed-mediated growth is used as a versatile approach to the synthesis of penta-twinned Cu nanorods with uniform diameters and controllable aspect ratios is reported. The success of this approach relies on our recent synthesis of uniform Pd decahedra, with sizes in the range of 6–20 nm. The Pd decahedral seeds can direct the heterogeneous nucleation and growth of Cu along the fivefold axis to produce nanorods with uniform diameters defined by the lateral dimension of the original seeds. Due to a large mismatch in the lattice constants between Cu and Pd (7.1%), the deposited Cu is forced to grow along one side of the Pd decahedral seed, generating a nanorod with an asymmetric distribution of Cu, with the Pd seed situated at one of the two ends. According to extinction spectra, the as-obtained Cu nanorods can be stored in water under the ambient conditions for at least six months without noticeable degradation. The resulting stability allows us to systematically investigate the size-dependent surface plasmon resonance properties of the penta-twinned Cu nanorods. With the nanorod transverse modes positioned at 560 nm, the longitudinal modes can be readily tuned from the visible to the near-infrared region by controlling the aspect ratio.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Peptide‐Passivated Lead Halide Perovskite Nanocrystals Based on Synergistic Effect between Amino and Carboxylic Functional Groups

A new strategy has been developed using peptides with amino and carboxylic functional groups as passivating ligands to produce methyl ammonium lead bromide (CH 3 NH 3 PbBr 3 ) perovskite nanocrystals (PNCs) with excellent optical properties. The well‐passivated PNCs can only be obtained when both amino and carboxylic groups are involved, and this is attributed to the protonation reaction between NH 2 and COOH that is essential for successful passivation of the PNCs. To better understand this synergistic effect, peptides with different lengths have been studied and compared. Due to the polar nature of peptides, peptide‐passivated PNCs (denoted as PNCs peptide ) aggregate and precipitate from nonpolar toluene solvent, resulting in a high product yield (≈44%). Furthermore, the size of PNCs peptide can be varied from ≈3.9 to 8.6 nm by adjusting the concentration of the peptide, resulting in tunable optical properties due to the quantum confinement effect. In addition, CsPbBr 3 PNCs are also synthesized with peptides as capping ligands, further demonstrating the generality and versatility of this strategy, which is important for generating high quality PNCs for photonics applications including light‐emitting diodes, optical sensing, and imaging.

Luo, Binbin↗
DOE OSTI2016

Engineered Elastomer Substrates for Guided Assembly of Complex 3D Mesostructures by Spatially Nonuniform Compressive Buckling

Approaches capable of creating 3D mesostructures in advanced materials (device-grade semiconductors, electroactive polymers, etc.) are of increasing interest in modern materials research. A versatile set of approaches exploits transformation of planar precursors into 3D architectures through the action of compressive forces associated with release of prestrain in a supporting elastomer substrate. Although a diverse set of 3D structures can be realized in nearly any class of material in this way, all previously reported demonstrations lack the ability to vary the degree of compression imparted to different regions of the 2D precursor, thus constraining the diversity of 3D geometries. This paper presents a set of ideas in materials and mechanics in which elastomeric substrates with engineered distributions of thickness yield desired strain distributions for targeted control over resultant 3D mesostructures geometries. This approach is compatible with a broad range of advanced functional materials from device-grade semiconductors to commercially available thin films, over length scales from tens of micrometers to several millimeters. A large range of 3D structures can be produced in this way, some of which have direct relevance to applications in tunable optics and stretchable electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Self-Templated Fabrication of CoO–MoO 2 Nanocages for Enhanced Oxygen Evolution

Oxygen evolution reaction (OER) plays a key role in energy conversion and storage processes such as water splitting and carbon dioxide reduction. However, the sluggish kinetics caused by insufficient active surface and limited charge transfer hinder OER's wide applications. In this work, a novel self-templating strategy for the fabrication of composite CoO–MoO 2 nanocages with enhanced OER performance is proposed. By designing a nanocage structure and incorporating conductive MoO 2 to promote both mass and charge transfer, high OER activity (η = 312 mV at 10 mA cm -2 ) as well as good stability in the resulting CoO–MoO 2 composite nanostructure can be achieved. This versatile synthetic strategy can also be extended to other metals (such as W) to provide greater opportunities for the controlled fabrication of mixed metal oxide nanostructures for electrochemical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Metallo‐Hydrogel‐Assisted Synthesis and Direct Writing of Transition Metal Dichalcogenides

Abstract Two dimensional (2D) transition metal dichalcogenides (TMDCs) have attracted interest for their compelling nanoscale new properties and numerous potential applications including fast optoelectronic devices, ultrathin photovoltaics, and high‐performance catalysts. Large‐scale growth of uniform TMDC materials is essential for investigating their physics and for their integration into devices. However, the wafer scale deposition of TMDCs on arbitrary nonselective substrates is still beyond the current state‐of‐the‐art. In this article, a method to synthesize layered TMDCs (MoS 2 and WS 2 ) at the wafer‐scale by sulfurization of transition metal ions (Mo 5+ and W 6+ ) in a gelatin template (metallo‐hydrogel) is reported. This process is adaptable to versatile substrates, including amorphous silicon oxide, high‐temperature quartz, and silicon. Although the products are nominally few layer materials, direct band photoluminescent (≈1.8 eV), similar to single‐ or decoupled multilayer MoS 2 is observed. Finally, the solution‐based deposition enables contact printing of TMDC channels to be useable for device applications including thin film transistors with printed silver contacts using the same process.

Zang, Xining↗
DOE OSTI2019

Rational Design of Capacitive Pressure Sensors Based on Pyramidal Microstructures for Specialized Monitoring of Biosignals

Abstract There is an increasing demand for specialized pressure sensors in various applications. Previously, capacitive pressure sensors have been shown to have wide versatility in use, with a high degree of potential tuning possible through manipulating the geometry or material selection of the dielectric layer. However, in order to make sensors that are tunable and predictable, the design and fabrication method first needs to be developed. Presented here is an improved fabrication method to achieve tunable, consistent, and reproducible pressure sensors by using a pyramid microstructured dielectric layer along with a lamination layer. The as‐produced sensor performance is able to match predicted trends. Further, a simple model based on this system is developed and its efficacy is experimentally confirmed. Then, the model to predict a wide range of material and microstructure geometric properties prior to device fabrication is used to provide trends on sensor performance. Finally, it is demonstrated that the new method can be used to targetedly design a pressure sensor for a specific application—in vitro pulse sensing.

Ruth, Sara Rachel Arussy↗
DOE OSTI2019

Heterojunction Architecture of N‐Doped WO 3 Nanobundles with Ce 2 S 3 Nanodots Hybridized on a Carbon Textile Enables a Highly Efficient Flexible Photocatalyst

Abstract The availability of robust, versatile, and efficient photocatalysts is the main bottleneck in practical applications of photocatalytic degradation of organic pollutants. Herein, N‐WO 3 /Ce 2 S 3 nanotube bundles (NBs) are synthesized and successfully immobilized on a carbon textile, resulting in a flexible and conducting photocatalyst. Due to the large interfacial area between N‐WO 3 and Ce 2 S 3 , the interwoven 3D carbon architecture and, more importantly, the establishment of a heterojunction between N‐WO 3 and Ce 2 S 3 , the resultant photocatalyst exhibits excellent light absorption capacity and superior ability to separate photoinduced electron–hole pairs for the photocatalytic degradation of organic compounds in air and water media. Theoretical calculations confirm that the strong electronic interaction between N‐WO 3 and Ce 2 S 3 can be beneficial to the enhancement of the charge carrier transfer dynamics of the as‐prepared photocatalyst. This work provides a new protocol for constructing efficient flexible photocatalysts for application in environmental remediation.

Huang, Yongchao↗
DOE OSTI2019

Flexible Thermoelectric Devices of Ultrahigh Power Factor by Scalable Printing and Interface Engineering

Printing is a versatile method to transform semiconducting nanoparticle inks into functional and flexible devices. In particular, thermoelectric nanoparticles are attractive building blocks to fabricate flexible devices for energy harvesting and cooling applications. However, the performance of printed devices are plagued by poor interfacial connections between nanoparticles and resulting low carrier mobility. While many rigid bulk materials have shown a thermoelectric figure of merit ZT greater than unity, it is an exacting challenge to develop flexible materials with ZT near unity. Here, a scalable screen-printing method to fabricate high-performance and flexible thermoelectric devices is reported. A tellurium-based nanosolder approach is employed to bridge the interfaces between the BiSbTe particles during the postprinting sintering process. The printed BiSbTe flexible films demonstrate an ultrahigh room-temperature power factor of 3 mW m -1 K -2 and ZT about 1, significantly higher than the best reported values for flexible films. A fully printed thermoelectric generator produces a high power density of 18.8 mW cm -2 achievable with a small temperature gradient of 80 °C. This screen-printing method, which directly transforms thermoelectric nanoparticles into high-performance and flexible devices, presents a significant leap to make thermoelectrics a commercially viable technology for a broad range of energy harvesting and cooling applications.

36 MATERIALS SCIENCE↗