Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vector field”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Semiconductor Crystal Growth in Static and Rotating Magnetic fields

Magnetic fields have been applied during the growth of bulk semiconductor crystals to control the convective flow behavior of the melt. A static magnetic field established Lorentz forces which tend to reduce the convective intensity in the melt. At sufficiently high magnetic field strengths, a boundary layer is established ahead of the solid-liquid interface where mass transport is dominated by diffusion. This can have a significant effect on segregation behavior and can eliminate striations in grown crystals resulting from convective instabilities. Experiments on dilute (Ge:Ga) and solid solution (Ge-Si) semiconductor systems show a transition from a completely mixed convective state to a diffusion-controlled state between 0 and 5 Tesla. In HgCdTe, radial segregation approached the diffusion limited regime and the curvature of the solid-liquid interface was reduced by a factor of 3 during growth in magnetic fields in excess of 0.5 Tesla. Convection can also be controlled during growth at reduced gravitational levels. However, the direction of the residual steady-state acceleration vector can compromise this effect if it cannot be controlled. A magnetic field in reduced gravity can suppress disturbances caused by residual transverse accelerations and by random non-steady accelerations. Indeed, a joint program between NASA and the NHMFL resulted in the construction of a prototype spaceflight magnet for crystal growth applications. An alternative to the suppression of convection by static magnetic fields and reduced gravity is the imposition of controlled steady flow generated by rotating magnetic fields (RMF)'s. The potential benefits of an RMF include homogenization of the melt temperature and concentration distribution, and control of the solid-liquid interface shape. Adjusting the strength and frequency of the applied magnetic field allows tailoring of the resultant flow field. A limitation of RMF's is that they introduce deleterious instabilities above a critical magnetic field value. Growth conditions in which static magnetic fields rotational magnetic fields, and reduced gravitational levels can have a beneficial role will be described.

Volz, Martin↗

Polarization and position measurements of Type III bursts

The positional and polarization characteristics of Type III bursts in the range 24-220 MHz as measured by the Culgoora radioheliograph, spectrograph and spectropolarimeter are reported. The study includes 997 bursts which are of two classes: fundamental-harmonic (F-H) pairs and 'structureless' bursts with no visible F-H structure, and concentrates on the polarization of the bursts and the variation of polarization from centre to limb. The observed centre-to-limb decrease in polarization approximately follows a cosine law. This decrease is not as predicted by simple theory but is consistent with other observations which imply that open field lines from an active region diverge strongly. The observed o-mode polarization of harmonic radiation implies that the wave vectors of Langmuir waves are always parallel, within about 20 deg, to the magnetic field, while the constancy of H polarization with frequency implies that the ratio of gyromagnetic to plasma frequency, the Alfven speed and the plasma beta are constant with height on the open field lines above an active region. Finally, it is inferred that some factor, in addition to the magnetic field strength, controls the polarization of F radiation.

Suzuki, S.↗

Performance of two texture-based classifiers of cloud fields using spatially averaged Landsat data

Using the gray-level difference vector approach, classification accuracies with 1/8-km spatial-resolution data are similar to those obtained using the full spatial-resolution features. Hence no advantage is to be gained in cloud classification accuracies by using even higher spatial resolutions obtained from Landsat TM or SPOT imagery. The optimum spatial resolution is 1/4 km. However, significant improvement in cloud-classification accuracy compared to that available from the 1-km resolution of AVHRR and GOES imagery is obtained using 1/2-km-resolution data. Cirrus-classification accuracy is especially compromised as spatial resolution is degraded. However, texture measures defined at the combination of pixel separations d = 1,4 improve classification accuracies by several percent, even for 1-km spatial-resolution data. Cirrus-classification accuracy is significantly improved by the use of multiple distance features.

Sengupta, S. K.↗

Qualitative evaluation of a conformal velocity vector display for use at high angles-of-attack in fighter aircraft

A piloted simulation study was conducted to evaluate the utility of a display device designed to illustrate graphically and conformally the approximate location of a fighter aircraft's velocity vector. The display device consisted of two vertical rows of light emitting diodes (LED's) located toward the center of the cockpit instrument panel to each side of the control stick. The light strings provided a logical extension of the head up display (HUD) velocity vector symbol at flight path angles which exceeded the HUD field-of-view. Four test subjects flew a modified F/A-18 model with this display in an air-to-air engagement task against an equally capable opponent. Their responses to a questionnaire indicated that the conformal velocity vector information could not be used during the scenarios investigated due to the inability to visually track a target and view the lights simultaneously.

Jones, Denise R.↗

A mirror instability associated with newly created ions in a moving plasma

Using a plasma model in which the ambient magnetic field is parallel to the z axis and the wave vector, an instability that resembles the usual hydromagnetic mirror instability is demonstrated. The instability is caused by freshly created ions in a moving plasma; the source of its free energy is associated with the ring distribution of the newly created ions, resulting in a high ion kinetic temperature in the direction transverse to the ambient magnetic field. The results of a stability analysis indicate that this instability can lead to the amplification of magnetosonic waves.

Wu, C. S.↗

A preliminary harmonic spline model from Magsat data

A preliminary main field model for 1980 derived from a carefully selected subset of Magsat vector measurements, using the method of harmonic splines, is presented. This model (PHS /80/) for preliminary harmonic splines is the smoothest model (in the sense that the rms radial field at the core surface is minimum) consistent with the measurements (with an rms misfit of 10 nT to account for crustal and external fields as well as noise in the measurement procedure). Therefore PHS (80) is more suitable for studies of the core than models derived with the traditional least squares approach (e.g., GSFC /9/80/). A comparison is conducted of the characteristics of the harmonic spline spectrum, topology of the core field and especially the null-flux curves (loci where the radial field is zero) and the flux through patches bounded by such curves. PHS (80) is less complex than GSFC (9/80) and is therefore more representative of that part of the core field that the data constrain.

Shure, L.↗

Space shuttle guidance, navigation and control equation document no. 4: Precision state and filter weighting matrix extrapolation

The Precision State and Filter Weighting Matrix Extrapolation Routine is described which provides the capability to extrapolate any spacecraft geocentric state vector either backwards or forwards in time through a force field consisting of the earth's primary central-force gravitational attraction and a superimposed perturbing acceleration. The routine also provides the capability of extrapolating the filter-weighting matrix along the precision trajectory. This matrix is a square root form of the error covariance matrix and contains statistical information relative to the accuracies of the state vectors and certain other optionally estimated quantities. The routine is a cooled algorithm for the numerical solution of modified forms of the basic differential equations which are satisfied by the geocentric state vector of the spacecraft's center of mass and by the filter-weighting matrix.

Robertson, W. M.↗

Observations of a new class of upstream waves with periods near 3 seconds

A new class of ULF waves with periods near 3 s in the earth's upstream region is found by examining the high time resolution magnetic field data from the ISEE spacecraft. These waves are observed in the part of the upstream region which is magnetically connected to the bow shock, but only when the solar wind plasma beta is high (greater than 1). The waves are always right-handed, nearly circularly polarized in the spacecraft frame. The directions of the wave vectors are in the general direction of the average magnetic field, and the waves are convected downstream in the spacecraft frame. This study of these waves has shown that they appear to be intrinsically left-handed ion cyclotron waves in the plasma rest frame.

Le, G.↗

Simulation of AMVs for OSSEs

An algorithm to simulate locations of atmospheric motion vectors (AMVs) for use in observing system simulation experiments (OSSEs) is described and demonstrated. It is intended to obviate likely deficiencies in nature run data [standard meteorological parameters and aerosol tracers] if used to produce images for feature tracking. The algorithm employs probabilistic functions that are tuned based on distributions of real observations and histograms of nature run fields. For distinct observation types, the algorithm produces geographical and vertical distributions, time - mean counts, and typical spacings of simulated locations that are, at least, qualitatively similar to those of real observations and are associated with nature run cloud and water vapor fields. It thus appears suitable for generating realistic atmospheric motion vectors for use in observing system simulation experiments.

Errico, R. M.↗

Electric Field Double Probe Measurements on Satellites with Very Low Perigees

Measurements of DC and AC electric Fields at low altitudes (less than 150 km) in the Earth's ionosphere address a wide array of important scientific questions including Joule Heating, the closure of field aligned currents, and the deviation of E x B electron velocities from ion velocity vectors influenced by collisions. Double probes represent a well-proven technique for gathering high quality DC and AC electric field measurements for which the design of the boom system is of critical importance for the success of the experiment. In general, ionospheric DC electric field instruments that achieve accuracies of 0.1 mV/m or better, place sensors at large distances from the spacecraft body in order to extend well beyond the spacecraft wake and sheath and to achieve the large signal-to-noise ratios for DC and long wavelength measurements. Additional sets of sensors inboard of the primary, outermost sensors provide useful additional information, both for diagnostics of the plasma contact potentials, which particularly enhance the DC electric field measurements on non-spinning spacecraft, and for wavelength and phase velocity measurements that use the spaced receiver or "Interferometer" technique. Accurate attitude knowledge enables V x B contributions to be subtracted from the measured potentials, and permits the measured components to be rotated into meaningful geophysical reference frames. This presentation discusses the expected performance of electric field double probe experiments and their boom mechanisms on both spinning and non-spinning satellite platforms with very low perigees. Careful selection of probe surface materials, such as titanium nitride, for the low perigee environment, as well as thermal considerations are also discussed.

Pfaff, R. F., Jr.↗

Application of optical correlation techniques to particle imaging velocimetry

Pulsed laser sheet velocimetry yields nonintrusive measurements of velocity vectors across an extended 2-dimensional region of the flow field. The application of optical correlation techniques to the analysis of multiple exposure laser light sheet photographs can reduce and/or simplify the data reduction time and hardware. Here, Matched Spatial Filters (MSF) are used in a pattern recognition system. Usually MSFs are used to identify the assembly line parts. In this application, the MSFs are used to identify the iso-velocity vector contours in the flow. The patterns to be recognized are the recorded particle images in a pulsed laser light sheet photograph. Measurement of the direction of the partical image displacements between exposures yields the velocity vector. The particle image exposure sequence is designed such that the velocity vector direction is determined unambiguously. A global analysis technique is used in comparison to the more common particle tracking algorithms and Young's fringe analysis technique.

Wernet, Mark P.↗

Application of optical correlation techniques to particle imaging

Pulsed laser sheet velocimetry yields noninstrusive measurements of velocity vectors across an extended 2-dimensional region of the flow field. The application of optical correlation techniques to the analysis of multiple exposure laser light sheet photographs can reduce and/or simplify the data reduction time and hardware. Here, Matched Spatial Filters (MSF) are used in a pattern recognition system. Usuallay MSFs are used to identify the assembly line parts. In this application, the MSFs are used to identify the iso-velocity vector contours in the flow. The patterns to be recognized are the recorded particle images in a pulsed laser light sheet photograph. Measurement of the direction of the particle image displacements between exposures yields the velocity vector. The particle image exposure sequence is designed such that the velocity vector direction is determined unambiguously. A global analysis technique is used in comparison to the more common particle tracking algorithms and Young's fringe analysis technique.

Wernet, Mark P.↗

Space Technology 5 Multi-point Measurements of Near-Earth Magnetic Fields: Initial Results

The Space Technology 5 (ST-5) mission successfully placed three micro-satellites in a 300 x 4500 km dawn-dusk orbit on 22 March 2006. Each spacecraft carried a boom-mounted vector fluxgate magnetometer that returned highly sensitive and accurate measurements of the geomagnetic field. These data allow, for the first time, the separation of temporal and spatial variations in field-aligned current (FAC) perturbations measured in low-Earth orbit on time scales of approximately 10 sec to 10 min. The constellation measurements are used to directly determine field-aligned current sheet motion, thickness and current density. In doing so, we demonstrate two multi-point methods for the inference of FAC current density that have not previously been possible in low-Earth orbit; 1) the "standard method," based upon s/c velocity, but corrected for FAC current sheet motion, and 2) the "gradiometer method" which uses simultaneous magnetic field measurements at two points with known separation. Future studies will apply these methods to the entire ST-5 data set and expand to include geomagnetic field gradient analyses as well as field-aligned and ionospheric currents.

Slavin, James A.↗

Midlatitude Pi2 pulsations: AFGL and ISEE magnetometer observations correlated

The ISEE observations of the pi2 magnetic pulsations occuring substorm onset in the inner magnetosphere are discussed. One of these events which was also detected as a pi2 event by the AFGL midlatitude magnetometers is considered. The event occurred when the foot of the ISEE field line was over North America. The ground and satellite signals are remarkably similar: they start and stop at the same time, have the same period and can be correlated cycle by cycle. The waves are detected in the electric field data from ISEE 1 and in the magnetic field data from both ISEE 1 and ISEE 2. Calculation of the Poynting vector at ISEE 1 shows that the energy flowed mainly westward, but that there was also a component towards the nearer (southern) ionospheric foot of the field line. The phases between the various field components measured by ISEE 1 and 2 indicate that this is a standing hydromagnetic oscillation.

Hughes, W. J.↗

Kelvin Helmholtz Instability at the Equatorial Magnetotail Boundary: MHD Simulation and Comparison with Geotail Observations

On March 24, 1995 the Geotail spacecraft observed large fluctuations of the magnetic field and plasma properties in the Low Latitude Boundary Layer (LLBL) about 15 R(sub E) tailward of the dusk meridian. Although the magnetospheric and the magnetosheath field were strongly northward, the B(sub z) component showed strong short duration fluctuations in which B(sub z) could even reach negative values. We have used two-dimensional magnetohydrodynamic simulations with magnetospheric and magnetosheath input parameters specifically chosen for this. Geotail event to identify the processes which cause the observed boundary properties. It is shown that these fluctuations can be explained by the Kelvin-Helmholtz instability if the k vector of the instability has a component along the magnetic field direction. The simulation results show many of the characteristic properties of the Geotail observations. In particular, the quasi-periodic strong fluctuations are well explained by satellite crossings through the Kelvin-Helmholtz vortices. It is illustrated how the interior structure of the Kelvin-Helmholtz vortices leads to the rapid fluctuations in the Geotail observations. Our results suggest an average Kelvin-Helmholtz wavelength of about 5 R(sub E) with a vortex size of close to 2 R(sub E) for an average repetition time of 2.5 minutes. The growth time for these waves implies a source region of about 10 to 16 R(sub E) upstream from the location of the Geotail spacecraft (i.e., near the dusk meridian). The results also indicate a considerable mass transport of magnetosheath material into the magnetosphere by magnetic reconnection in the Kelvin-Helmholtz vortices.

Fairfield, Donald H.↗

Ionospheric nf sub H resonances: Frequency shifts versus plasma conditions

The Alouette 2 resonances observed near the harmonics of the electron cyclotron frequency f sub H reveal frequency shifts (relative to the n(f sub H) values derived from model field calculations) which can be interpreted in terms of plasma wave dispersion effects. These effects are observed on the 2(f sub H) resonance when it is near the resonance observed close to the upper hybrid frequency f sub T. The observations suggest that an oblique echo model may be required to give a proper interpretation of the 2(f sub H) resonance. Cyclotron damping can be ignored only when the angle between the propagation vector and the direction perpendicular to the earth's magnetic field B is less than a few degrees for the 2(f sub H) wave, and less than a few tenths of a degree for the n(f sub H) waves with n 2. The negative offset of the absolute value of B inferred from the plasma resonance observations is consistent with expectations based on recent OGO 3 and OGO 5 rubidium magnetometer observations at higher altitudes in the equatorial regions.

Benson, R. F.↗

High frequency electromagnetic response of the moon

It is shown that the contribution of higher harmonics to the lunar transfer functions for the tangential components of the surface magnetic field is significant at frequencies greater than 0.01 Hz. The inclusion of the higher harmonics shows that there are two distinct transfer functions corresponding to the components of the tangential surface magnetic field perpendicular and parallel to the direction of the wave vector of the external disturbance forcing the lunar induction. The dependences of these transfer functions on frequency and location are determined. The effects of the higher harmonics can: (1) account for a hitherto unexplained feature in the Apollo 12-Explorer 35 transfer functions, namely the rolloff at high frequencies; and (2) offer a possible explanation for the frequency dependence of the difference between the transfer functions for the two orthogonal components of the surface magnetic field. The harmonic response of a simple current layer model of the moon is derived.

Schubert, G.↗

High-frequency electromagnetic response of the moon.

It is shown that the contribution of higher harmonics to the lunar transfer functions for the tangential components of the surface magnetic field is significant at frequencies greater than 0.01 Hz. The inclusion of the higher harmonics shows that there are two distinct transfer functions corresponding to the components of the tangential surface magnetic field perpendicular and parallel to the direction of the wave vector of the external disturbance forcing the lunar induction. The dependences of these transfer functions on frequency and location are determined. The effects of the higher harmonics can (1) account for a hitherto unexplained feature in the Apollo 12 and Explorer 35 transfer functions, namely the rolloff at high frequencies, and (2) offer a possible explanation for the frequency dependence of the difference between the transfer functions for the two orthogonal components of the surface magnetic field.

Schubert, G.↗