Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vanadium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Design of Ternary Nanoalloy Catalysts: Effect of Nanoscale Alloying and Structural Perfection on Electrocatalytic Enhancement

The ability to tune the atomic-scale structural and chemical ordering in nanoalloy catalysts is essential for achieving the ultimate goal of high activity and stability of catalyst by design. This article demonstrates this ability with a ternary nanoalloy of platinum with vanadium and cobalt for oxygen reduction reaction in fuel cells. The strategy is to enable nanoscale alloying and structural perfection through oxidative–reductive thermochemical treatments. The structural manipulation is shown to produce a significant enhancement in the electrocatalytic activity of the ternary nanoalloy catalysts for oxygen reduction reaction. Mass activities as high as 1 A/mg of Pt have been achieved by this strategy based on direct measurements of the kinetic currents from rotating disk electrode data. Using a synchrotron high-energy X-ray diffraction technique coupled with atomic pair function analysis and X-ray absorption fine structure spectroscopy as well as X-ray photoelectron spectroscopy, the atomic-scale structural and chemical ordering in nanoalloy catalysts prepared by the oxidative–reductive thermochemical treatments were examined. A phase transition has been observed, showing an fcc-type structure of the as-prepared and the lower-temperature-treated particles into an fct-type structure for the particles treated at the higher temperature. The results reveal a thermochemically driven evolution of the nanoalloys from a chemically disordered state into chemically ordered state with an enhanced degree of alloying. The increase in the chemical ordering and shrinking of interatomic distances as a result of thermochemical treatment at increased temperature is shown to increase the catalytic activity for oxygen reduction reaction, exhibiting an optimal activity at 600 °C. It is the alloying and structural perfection that allows the optimization of the catalytic performance in a controllable way, highlighting the significant role of atomic-scale structural and chemical ordering in the design of nanoalloy catalysts.

Environmental Molecular Sciences Laboratory↗

Unusual 5f magnetism in new kagome material UV 6 Sn 6

Materials in the family R V 6 Sn 6 (R = rare earth) provide a unique platform to investigate the interplay between local moments from R layers and nonmagnetic vanadium kagome layers. Yet, the investigation of actinide members remains scarce. Here we report the synthesis of UV 6 Sn 6 single crystals through the self-flux technique. Physical property measurements reveal two uranium-driven antiferromagnetic transitions at T N 1 = 29 K and T N 2 = 24 K, a complex field-temperature phase diagram, and unusual negative domain-wall magnetoresistance. Specific heat and angle-resolved photoemission spectroscopy measurements show a moderate f -electron enhancement to the density of states at the Fermi level (EF), whereas our band structure calculations place the vanadium flat bands 0.25 eV above E F . These findings point to a materials opportunity to expand the uranium 166 family with the goal of enhancing correlations by tuning 5 f and 3 d flat bands to E F .

36 MATERIALS SCIENCE↗

The impact of surface composition on the interfacial energetics and photoelectrochemical properties of BiVO{sub 4}.

The ability to engineer a photoelectrode surface is pivotal for optimizing the properties of any photoelectrode used for solar fuel production. Altering crystal facets exposed on the surface of photoelectrodes has been a major strategy to modify their surface structure. However, there exist numerous ways to terminate the surface even for the same facet, which can considerably alter the photoelectrode properties. Here we report tightly integrated experimental and computational investigations of epitaxial BiVO4 photoelectrodes with vanadium- and bismuth-rich (010) facets. Our study demonstrates that even for the same facet the surface Bi:V ratio has a remarkable impact on the interfacial energetics and photoelectrochemical properties. We also elucidate the microscopic origins of how the surface composition can affect the photoelectrochemical properties. This study opens an unexplored path for understanding and engineering surface energetics via tuning the surface termination/composition of multinary oxide photoelectrodes.

Lee, Dongho↗

Emptying and filling a tunnel bronze

The classical orthorhombic layered phase of V 2 O 5 has long been regarded as the thermodynamic sink for binary vanadium oxides and has found great practical utility as a result of its open framework and easily accessible redox states. Herein, we exploit a cation-exchange mechanism to synthesize a new stable tunnel-structured polymorph of V 2 O 5 (ζ-V 2 O 5 ) and demonstrate the subsequent ability of this framework to accommodate Li and Mg ions. The facile extraction and insertion of cations and stabilization of the novel tunnel framework is facilitated by the nanometer-sized dimensions of the materials, which leads to accommodation of strain without amorphization. The topotactic approach demonstrated here indicates not just novel intercalation chemistry accessible at nanoscale dimensions but also suggests a facile synthetic route to ternary vanadium oxide bronzes (MxV 2 O 5 ) exhibiting intriguing physical properties that range from electronic phase transitions to charge ordering and superconductivity.

36 MATERIALS SCIENCE↗

Li/Ag 2 VO 2 PO 4 batteries: the roles of composite electrode constituents on electrochemistry

In this study, we utilize silver vanadium phosphorous oxide, Ag 2 VO 2 PO 4 , as a model system to systematically study the impact of the constituents of a composite electrode, including polymeric and conductive additives, on electrochemistry. Notably, although highly resistive, this bimetallic cathode can be discharged as a pure electroactive material in the absence of a conductive additive as it generates an in situ conductive matrix via a reduction displacement reaction resulting in the formation of silver metal nanoparticles. Also, three different electrode compositions were investigated: Ag 2 VO 2 PO 4 only, Ag 2 VO 2 PO 4 4 with binder, and Ag 2 VO 2 PO 4 with binder and carbon. Constant current discharge, pulse testing and impedance spectroscopy measurements were used to characterize the electrochemical properties of the electrodes as a function of depth of discharge. In situ EDXRD was used to spatially resolve the discharge progression within the cathode by following the formation of Ag 0 . Ex situ XRD and EXAFS modeling were used to quantify the amount of Ag 0 formed. Results indicate that the metal center reduced (V 5+ or Ag + ) was highly dependent on composite composition (presence of PTFE, carbon), depth of discharge (Ag 0 nanoparticle formation), and spatial location within the cathode. The addition of a binder was found to increase cell polarization, and the percolation network provided by the carbon in the presence of PTFE was further increased with reduction and formation of Ag 0 . Lastly, this study provides insight into the factors controlling the electrochemistry of resistive active materials in composite electrodes.

25 ENERGY STORAGE↗

Photoelectron spectroscopic and computational study of [EDTA•M(III)]- complexes (M = H3, Al, Sc, V-Co)

Metal-EDTA complexes are commonly existed as biological redox reagents. We havegenerated a series of such complexes, [EDTA•M(III)]- (M = Al, Sc, V-Co), via electrospray ionization and characterized them by cryogenic mass-selected negative ion photoelectron spectroscopy (NIPES) and theoretical calculations. Experiments clearly revealed one more spectral band at low electron binding energy for transition metal complexes with d electrons (M = V-Co) than those without d electrons (M = Al and Sc). Quantum chemical calculations suggested that all of the metal-complexes possess hexacoordinated metal-ligand binding motifs, from which the calculated adiabatic/vertical detachment energy (ADE/VDE) and band gaps are in good agreement with experimental values. Direct spectrum and electronic structure analyses indicted that [EDTA•V(III)]- can be easily oxidized to [EDTA•V(IV)] with the smallest ADE/VDE of 3.95/4.40 eV among these metal-complexes, but further oxidation is hindered by the existence of a 2.30 eV band gap, a fact that accords with the special redox behavior of vanadium-containing species in biology cells. Spin density and molecular orbital analyses reveal that [EDTA•V(III)]- was overwhelmingly detached from vanadium atom, in a stark contrast to [EDTA•Sc(III)/Al(III)]- where the detachment occurred from the EDTA ligand. For all other metal complex anions, from M = Cr to Co, the detachment process is derived from contributions from both the metal and ligand. The intrinsic electronic and geometric structures of these complexes, obtained in this work, provide a molecular foundation to better understand their redox chemistries and specific metal bindings in condensed phases and biology cells.

Yuan, Qinqin↗

A highly efficient uranium grabber derived from acrylic fiber for extracting uranium from seawater

Acrylic fiber can be chemically converted to an am- idoxime and carboxylate containing chelating adsorbent for extraction of uranium from seawater. At an optimized ratio of amidoxime:carboxylate, the chelating fiber in real seawater shows a higher uranium, shorter saturation time and lower vanadium adsorption capacity relative to similar high-surface area chelating fibers developed recently using a radiation-induced grafting method. This simple and low-cost synthesis method can be scaled up to mass produce the chelating fiber for recovering metals from aquatic environments including production of uranium from seawater.

Pan, H B.↗

Ortho-para interconversion in cation-water complexes: The case of V + (H 2 O) and Nb + (H 2 O) clusters

Vanadium and niobium cation-water complexes, V + (H 2 O) and Nb + (H 2 O), are produced by laser vaporization in a pulsed supersonic expansion, mass selected in a time-of-flight spectrometer, and studied with infrared photodissociation spectroscopy using rare gas atom (Ar, Ne) complex predissociation. The vibrational bands measured in the O–H stretching region contain K-type rotational sub-band structure, which provides insight into the structures of these complexes. However, rotational sub-bands do not exhibit the simple patterns seen previously for other metal ion-water complexes. We report the $A$ rotational constants are smaller than expected and the normal 1:3 intensity ratios for K = even:odd levels for independent ortho:para nuclear spin states are missing for some complexes. We relied on highly correlated internally contracted Multi-Reference Configuration Interaction (icMRCI) and Coupled Cluster [CCSD(T)] electronic structure calculations of those complexes with and without the rare gas atoms to investigate these anomalies. Rare gas atoms were found to bind via asymmetric motifs to the hydrated complexes undergoing large amplitude motions that vibrationally average to quasi-C 2v symmetry with significant probability off the C 2 axis, thus explaining the reduced $A$ values. Both vanadium and iobium cations exhibit unusually strong nuclear spin coupling to the hydrogen atoms of water, the values of which vary with their electronic state. This catalyzes ortho-para interconversion in some complexes and explains the rotational patterns. The rate of ortho-para relaxation in the equilibrated complexes must therefore be greater than the collisional cooling rate in the supersonic expansion (about 106 sec-1).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Attosecond transient absorption instrumentation for thin film materials: Phase transitions, heat dissipation, signal stabilization, timing correction, and rapid sample rotation

We present an extreme ultraviolet (XUV) transient absorption apparatus tailored to attosecond and femtosecond measurements on bulk solid-state thin-film samples, specifically when the sample dynamics are sensitive to heating effects. The setup combines methodology for stabilizing sub-femtosecond time-resolution measurements over 48 h and techniques for mitigating heat buildup in temperature-dependent samples. Single-point beam stabilization in pump and probe arms and periodic time-zero reference measurements are described for accurate timing and stabilization. A hollow-shaft motor configuration for rapid sample rotation, raster scanning capability, and additional diagnostics are described for heat mitigation. Heat transfer simulations performed using a finite element analysis allow comparison of sample rotation and traditional raster scanning techniques for 100 Hz pulsed laser measurements on vanadium dioxide, a material that undergoes an insulator-to-metal transition at a modest temperature of 340 K. Experimental results are presented confirming that the vanadium dioxide (VO 2 ) sample cannot cool below its phase transition temperature between laser pulses without rapid rotation, in agreement with the simulations. The findings indicate the stringent conditions required to perform rigorous broadband XUV time-resolved absorption measurements on bulk solid-state samples, particularly those with temperature sensitivity, and elucidate a clear methodology to perform them.

47 OTHER INSTRUMENTATION↗

Distribution of collected target debris using the large area solid debris radiochemistry collector

A large area solid radiochemistry collector was deployed at the National Ignition Facility (NIF) with a collection efficiency for post-shot, solid target debris of approximately 1% of the total 4π solid angle. The collector consisted of a 20-cm diameter vanadium foil surrounded by an aluminum side-enclosure and was fielded 50 cm from the NIF target. The collector was used on two NIF neutron yield shots, both of which had a monolayer of 238 U embedded in the capsule ablator 10 μm from the inner surface. Fission and activation products produced in the 238 U were collected, and subsequent analyses via gamma spectroscopy indicated that the distribution of fission products was not uniform, with peak and valley fission products preferentially collected on the vanadium and low- and high-mass fission products primarily located on the aluminum side-enclosure. The results from these shots will be used to design future nuclear data experiments at NIF.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Laboratory measurements of geometrical effects in the x-ray emission of optically thick lines for ICF diagnostics

Understanding the effects of radiative transfer in High Energy Density Physics experiments is critical for the characterization of the thermodynamic properties of highly ionized matter, in particular in Inertial Confinement Fusion (ICF). In this paper, we report on non-Local Thermodynamic Equilibrium experiments on cylindrical targets carried out at the Omega Laser Facility at the Laboratory for Laser Energetics, Rochester NY, which aim to characterize these effects. In these experiments, a 50/50 mixture of iron and vanadium, with a thickness of 2000 Å and a diameter of 250 μm, is contained within a beryllium tamper, with a thickness of 10 μm and a diameter of 1000 μm. Each side of the beryllium tamper is then irradiated using 18 of the 60 Omega beams with an intensity of roughly 3 × 10 14 W cm -2 per side, over a duration of 3 ns. Spectroscopic measurements show that a plasma temperature on the order of 2 keV was produced. Imaging data show that the plasma remains cylindrical, with geometrical aspect ratios (quotient between the height and the radius of the cylinder) from 0.4 to 2.0. The temperatures in this experiment were kept sufficiently low (~1–2 keV) so that the optically thin Li-like satellite emission could be used for temperature diagnosis. This allowed for the characterization of optical-depth-dependent geometric effects in the vanadium line emission. Lastly, simulations present good agreement with the data, which allows this study to benchmark these effects in order to take them into account to deduce temperature and density in future ICF experiments, such as those performed at the National Ignition Facility.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Young’s modulus of V 3 O 5 thin films

Vanadium oxide V 3 O 5 exhibits an insulator-to-metal transition (IMT) near 430 K, which is the highest value for all vanadium oxides exhibiting IMTs. This makes it interesting for advanced electronic applications. However, the properties of V 3 O 5 have been little studied, and, in particular, there are no reports of experimentally determined mechanical properties. In this work, Young’s modulus of sputter-deposited V 3 O 5 thin films has been determined by measuring the fundamental resonant frequency of V 3 O 5 -coated silicon microcantilevers using a laser beam deflection technique. After deposition, the films were characterized by x-ray diffraction, resistivity measurements, and atomic force microscopy. The value of Young’s modulus experimentally determined for V 3 O 5 was 198 ± 14 GPa, which is slightly lower than the computationally derived values for bulk crystal V 3 O 5 .

36 MATERIALS SCIENCE↗

Microfabrication of plastic-PDMS microfluidic devices using polyimide release layer and selective adhesive bonding

In this study, we present an improved method to bond poly(dimethylsiloxane) (PDMS) with polyimide (PI) to develop flexible substrate microfluidic devices. The PI film was separately fabricated on a silicon wafer by spin coating followed by thermal treatment to avoid surface unevenness of the flexible substrate. In this way, we could also integrate flexible substrate into standard micro-electromechanical systems (MEMS) fabrication. Meanwhile, the adhesive epoxy was selectively transferred to the PDMS microfluidic device by a stamp-and-stick method to avoid epoxy clogging the microfluidic channels. To spread out the epoxy evenly on the transferring substrate, we used superhydrophilic vanadium oxide film coated glass as the transferring substrate. After the bonding process, the flexible substrate could easily be peeled off from the rigid substrate. Contact angle measurement was used to characterize the hydrophicity of the vanadium oxide film. X-ray photoelectron spectroscopy analysis was conducted to study the surface of the epoxy. We further evaluated the bonding quality by peeling tests, which showed a maximum bonding strength of 100 kPa. By injecting with black ink, the plastic microfluidic device was confirmed to be well bonded with no leakage for a day under 1 atm. Finally, this proposed versatile method could bond the microfluidic device and plastic substrate together and be applied in the fabrication of some biosensors and lab-on-a-chip systems.

42 ENGINEERING↗

Magnetic order in the van der Waals magnet VCl 3

Here, we investigated the structural and magnetic properties of single-crystalline VCl 3 , a newly synthesized member of the vanadium trihalide family. High-quality single crystals were grown by the chemical vapor transport method, and their behavior was characterized using neutron diffraction and thermodynamic measurements. We show that VCl 3 crystallizes in the BiI 3 -type structure at room temperature and undergoes a structural phase transition at 𝑇 𝑆 = 103.7⁢(5)⁢K that lowers the lattice symmetry, followed by a zigzag antiferromagnetic order with a propagation vector 𝑘 = (0,0.5,1) below 𝑇 𝑁 = 21.8⁢(1)⁢K. Neutron diffraction experiments indicate that the ordered moments are canted by approximately 21° away from the 𝑐 axis toward the 𝑎 axis, yielding a total moment of approximately 1.09⁢(2) ⁢𝜇 B /V 3+ . Field-dependent magnetization along the 𝑐 axis exhibits a half magnetization plateau, indicative of a field-stabilized fractional state. These results establish VCl 3 as a new platform for exploring structural transitions, anisotropic magnetism, and field-induced phases in vanadium-based honeycomb magnets.

Kao, Zeyu [Fudan Univ., Shanghai (China)]↗

Insulating antiferromagnetism in VTe

Here, we report a detailed theoretical and experimental study on the vanadium monotelluride VTe, which crystallizes in the NiAs hexagonal structure. First-principles calculations reveal a complex hierarchy of magnetic interactions and energy scales, with the ground state theoretically determined as an ($\frac{1}{2}$, 0, $\frac{1}{2}$) antiferromagnetic ordering with insulating character and a band gap of 0.5 eV. Experimental synthesis and characterization efforts find a substantially off-stoichiometric orthorhombic structure (a defect NiAs structure) with composition V 0.85 Te, and an apparent Néel point of some 45 K. First-principles calculations find good agreement with the observed Néel point. We also give an extended examination of the effects of off-stoichiometry on the calculated energetics, finding significant volume-related effects. Our first-principles calculations find the stoichiometric phase VTe to have a negative vanadium defect formation energy of over 1 eV, thus explaining the formation of the off-stoichiometric phase. Finally, we provide a structural explanation for the formation of defect structures in this and numerous other NiAs-structure materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evolution of short-range magnetic correlations in ferromagnetic Ni-V alloys

Here we experimentally study how the magnetic correlations develop in a binary alloy close to the ferromagnetic quantum critical point with small-angle neutron scattering (SANS). Upon alloying the itinerant ferromagnet nickel with vanadium, the ferromagnetic order is continuously suppressed. The critical temperature T c vanishes when vanadium concentrations reach the critical value of x c =0.116 indicating a quantum critical point separating the ferromagnetic and paramagnetic phases. Earlier magnetization and μ⁢SR data have indicated the presence of magnetic inhomogeneities in Ni 1-x ⁢V x and, in particular, recognize the magnetic clusters close to x c , on the paramagnetic and on the ferromagnetic sides with nontrivial dynamical properties [R. Wang et al., Phys. Rev. Lett. 118, 267202 (2017)]. We present the results of SANS study with full polarization analysis of polycrystalline Ni 1-x⁢ V x samples with x=0.10 and x=0.11 with low critical temperatures T c <50 K. For both Ni-V samples close to x c we find isotropic magnetic short-range correlations on the nanometer scale persisting at low temperatures. They are suppressed gradually in higher magnetic fields. In addition, signatures of long-range ordered magnetic domains are present below T c . The fraction of these magnetic clusters embedded in the ferromagnetic ordered phase grows toward x c and agrees well with the cluster fraction estimate from the magnetization and μ⁢SR data. Our SANS studies provide new insights into the nature of the inhomogeneities in a ferromagnetic alloy close to a quantum critical point.

36 MATERIALS SCIENCE↗

Magnetic order and ice rules in the multiferroic spinel FeV 2 O 4

We present a neutron-diffraction study of FeV2O4, which is rare in exhibiting spin and orbital degrees of freedom on both cation sublattices of the spinel structure. Our data confirm the existence of three structural phase transitions previously identified with x-ray powder diffraction and reveal that the lower two transitions are associated with sequential collinear and canted ferrimagnetic transitions involving both cation sites. Through consideration of local crystal and spin symmetry, we further conclude that Fe2+ cations are ferro-orbitally ordered below 135 K and V3+ orbitals order at 60 K, in accordance with predictions for vanadium spinels with large trigonal distortions and strong spin-orbit coupling. Intriguingly, the direction of ordered vanadium spins at low temperature obey ice rules more commonly associated with the frustrated rare-earth pyrochlore systems.

36 MATERIALS SCIENCE↗