SEARCH · Engineering Papers

Results for “topography”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

All sources NASA NTRS DOE OSTI

NASA NTRS1975

Nearshore coastal mapping

Two test sites of different water quality and bottom topography were used to test for maximum water depth penetration using the Skylab S-192 MSS for measurement of nearshore coastal bathymetry. Sites under investigation lie along the Lake Michigan coastline where littoral transport acts to erode sand bluffs and endangers developments along 1,200 miles of shore, and on the west coast of Puerto Rico where unreliable shoal location and depth information constitutes a safety hazard to navigation. The S-192 and S-190A and B provide data on underwater features because of water transparency in the blue/green portion of the spectrum. Depth of 20 meters were measured with the S-192 in the Puerto Rico test site. The S-190B photography with its improved spatial resolution clearly delineates the triple sand bar topography in the Lake Michigan test site. Several processing techniques were employed to test for maximum depth measurement with least error. The results are useful for helping to determine an optimum spectral bandwidth for future space sensors that will increase depth measurements for different water attenuation conditions where a bottom reflection is detectable.

Polcyn, F. C.↗

NASA NTRS1976

The influence of the atmosphere on geoid and potential coefficient determinations from gravity data

For the precise computation of geoid undulations the effect of the attraction of the atmosphere on the solution of the basic boundary value problem of gravimetric geodesy must be considered. This paper extends the theory of Moritz for deriving an atmospheric correction to the case when the undulations are computed by combining anomalies in a cap surrounding the computation point with information derived from potential coefficients. The correction term is a function of the cap size and the topography within the cap. It reaches a value of 3.0 m for a cap size of 30 deg, variations on the decimeter level being caused by variations in the topography. The effect of the atmospheric correction terms on potential coefficients is found to be small, reaching a maximum of 0.0055 millionths at n = 2, m = 2 when terrestrial gravity data are considered. The magnitude of this correction indicates that in future potential coefficient determination from gravity data the atmospheric correction should be made to such data.

Rummel, R.↗

NASA NTRS1977

Mission design for SEASAT-A, an oceanographic satellite

SEASAT-A is a NASA earth satellite for measuring global ocean dynamics from space. Launch is planned for May 1978. The instruments on the spacecraft will provide data on wave height and direction, surface wind speed and direction, ice fields, ocean surface topography and weather. This paper is concerned with the mission design for SEASAT-A. A primary topic here is the selection of the orbit which best satisfies the measurement objectives of the various instruments. The maintenance of this orbit under drag and other perturbations is discussed. The design of the mission profile is outlined. Finally precision orbit determination for SEASAT-A is discussed since it is required to maximize ocean topography accuracy.

Cutting, E.↗

NASA NTRS1976

Geologic structure of the eastern mare basins

The thickness of mare basalts in the eastern maria are estimated and isopachs of the basalts are constructed. Sub-basalt basin floor topography is determined, and correlations of topographic variations of the surface with variations in basalt thickness or basin floor topography are investigated.

Dehon, R. A.↗

NASA NTRS1978

The earth's gravity field and ocean dynamics

An analysis of the signal-to-noise ratio of the best gravity field available shows that a basis exists for the recovery of the dominant parameters of the quasi-stationary sea surface topography. Results obtained from the analysis of GEOS-3 show that it is feasible to recover the quasi-stationary dynamic sea surface topography as a function of wavelength. The gravity field models required for synoptic ocean circulation modeling are less exacting in that constituents affecting radial components of orbital position need not be known through shorter wavelengths.

Mather, R. S.↗

NASA NTRS1977

Topographic analysis of lunar secondary craters of Copernicus and implications

An analysis is conducted of the topography of lunar secondary craters and the associated herringbone pattern observed on lunar topophotomaps. The topography and the patterns are compared with those of crater pairs produced in the laboratory. The results are used to identify secondaries on the lunar uplands. The chain of craters that was selected for mapping and which is described is known to be a secondary impact crater chain produced by material ejected from Copernicus Crater because it lies on a well-developed ray system of Copernicus. Oberbeck et al. (1977) had hypothesized that most lunar areas exhibit more craters smaller than 50 km than are observed on Mars and Mercury because lower lunar gravity permitted more widespread distribution of secondaries for the moon. After removal of basin secondaries it is found that the surfaces of the lunar uplands are only sparsely populated by craters between 5 and 50 km. The lunar uplands appear then similar to the Mercurian terrain.

Oberbeck, V. R.↗

NASA NTRS1978

Implications of cavity, topographic and geologic influences on tilt and strain observations

Tilt and strain observations are importantly (pathologically at the 100%, typically at the few 10s% level) affected by cavities, topography, and geological inhomogenities; gravity observation are practically unaffected. The traditional earth tide observatory and abandoned mine or tunnel is a very poor place to measure body tides because of the complicated cavities, topography and geology. Instead, the ideal site for observing the body tide is in flat terrain with horizontally layered, mechanically homogeneous geology. Strain will be measured with long surface- or trench-mounted laser strain meters and tilt with long, surface- or trench mounted liquid levels, or with borehole tiltmeters. Horizontal geological discontinuities can produce large perturbations of the tilt and strain tides, and these perturbations, using the known homogeneous tidal strains and tilts, can be used in exploring local structure in favorable cases and, through possible time variations of tidal admittances, in predicting earthquakes.

Harrison, J. C.↗

NASA NTRS1978

Orbit analysis for Seasat-A

Seasat-A is a NASA earth satellite for measuring global ocean dynamics from space. The instruments on the spacecraft will provide data on wave height and direction, surface wind speed and direction, ice fields, ocean surface topography and atmospheric water content. This paper is concerned with the orbit analysis for Seasat-A. The first topic is the selection of the orbit which best satisfies the measurement objectives of the various instruments. The maintenance of this orbit under drag and other perturbations is also discussed. The second topic is precision orbit determination analysis which is required to achieve ocean topography objectives of the mission.

Cutting, E.↗

NASA NTRS1979

Mean sea level determination from satellite altimetry

The primary experiment on the Geodynamics Experimental Ocean Satellite-3 (GEOS-3) is the radar altimeter. This experiment's major objective is to demonstrate the utility of measuring the geometry of the ocean surface; i.e., the geoid. Results obtained from this experiment so far indicate that the planned objectives of measuring the topography of the ocean surface with an absolute accuracy of + or - 5 m can be met and perhaps exceeded. The GEOS-3 satellite altimeter measurements have an instrument precision in the range of + or - 25 cm to + or - 50 cm when the altimeter is operating in the 'short pulse' mode. After one year's operations of the altimeter, data from over 5000 altimeter passes have been collected. With the mathematical models developed and the altimeter data presently available, mapping of local areas of ocean topography has been realized to the planned accuracy levels and better. This paper presents the basic data processing methods employed and some interesting results achieved with the early data. Plots of mean sea surface heights as inferred by the altimeter measurements are compared with a detailed 1 by 1 deg gravimetric geoid.

Kahn, W. D.↗

NASA NTRS1979

A numerical model of the Martian polar cap winds

An investigation of the Martian polar cap winds and their response to a variety of factors is carried out by numerical experiments based on a zonally symmetric primitive equation model. The seasonal thermal forcing, mass exchange between polar caps and atmosphere, large-scale topography, and polar cap size are discussed, noting that topography has a small effect, but the circulation intensity increases with cap size. The model results show that surface winds near the edge of a retreating polar cap are enhanced, and that the surficial wind indicators near the south pole are formed during spring and those near the north pole during winter. It is suggested that the high-latitude dune fields in the northern hemisphere are formed when the terrain is covered by frost, and that the saltating particles are 'snowflakes' which formed by the mechanism proposed by Pollack (1976). The model results for the winter simulation compare favorably with general circulation model (GCM) calculations.

Haberle, R. M.↗

NASA NTRS1980

Topoclimatological and snowhydrological survey of Switzerland

The author has identified the following significant results. Low temperature zones depend on the topography and the terrain coverage type (besides the meteorological situation). The usual pattern of cold zones at the bottom of the valleys, warmer belts along the valley slopes, and cold mountain tops is modified by the terrain coverage type. Rural and forested areas normally have different surface temperatures, but along a vertical profile the temperature decrease (or increase) is often of the same order of magnitude. Because there is also a close correlation between the topography and terrain coverage (high percentage of forested areas at the valley slopes up to the timber line, much less along the valley floors), the surface temperature of the warm slope zone is increased compared to a valley profile with uniform coverage.

Winiger, M.↗

NASA NTRS1980

A harmonic analysis of lunar gravity

An improved model of lunar global gravity has been obtained by fitting a sixteenth-degree harmonic series to a combination of Doppler tracking data from Apollo missions 8, 12, 15, and 16, and Lunar Orbiters 1, 2, 3, 4, and 5, and laser ranging data to the lunar surface. To compensate for the irregular selenographic distribution of these data, the solution algorithm has also incorporated a semi-empirical a priori covariance function. Maps of the free-air gravity disturbance and its formal error are presented, as are free-air anomaly and Bouguer anomaly maps. The lunar gravitational variance spectrum has the form V(G; n) = O(n to the -4th power), as do the corresponding terrestrial and martian spectra. The variance spectra of the Bouguer corrections (topography converted to equivalent gravity) for these bodies have the same basic form as the observed gravity; and, in fact, the spectral ratios are nearly constant throughout the observed spectral range for each body. Despite this spectral compatibility, the correlation between gravity and topography is generally quite poor on a global scale.

Bills, B. G.↗

NASA NTRS1980

The subtidal response of sea level to atmospheric forcing in the Carolina Capes

The subtidal frequency response of sea level to atmospheric forcing along the coastal region between Cape Hatteras and Charleston is investigated for a four-month period: 1 September-31 December, 1974. It is found that low-frequency sea level fluctuations are preferentially forced by wind stress components which are aligned with the local topography. Also, a localized, one-dimensional model of sea surface response to a clockwise rotating wind for the Charleston coastal regime is developed. The phase spectrum of the alongshore wind component versus sea level as predicted by the model is shown to compare favorably to that derived from actual observations at Charleston, an open ocean coastal site. The model results and observations also suggest that wind-induced fluctuations of coastal sea level are trapped within 40 km of the coast by the combined effects of friction, Coriolis force and bottom topography. The outer shelf is dominated by fluctuations which are less related to wind stress and are attenuated rapidly in the shoreward direction. A reasonable estimate of bottom frictional coefficient, r = 0.05 cm/s, is also established.

Chao, S.-Y.↗

NASA NTRS1980

Preliminary evidence for the influence of physiography and scale upon the autocorrelation function of remotely sensed data

Previously established results demonstrate that LANDSAT data are autocorrelated and can be described by a univariate linear stochastic process known as auto-regressive-integrated-moving-average model of degree 1, 0, 1 or ARIMA (1, 0, 1). This model has two coefficients of interest for interpretation phi(1) and theta(1). In a comparison of LANDSAT thematic mapper simulator (TMS) data and LANDSAT MSS data several results were established: (1) The form of the relatedness as described by this model is not dependent upon system look angle or pixel size. (2) The phi(1) coefficient increases with decreasing pixel size and increasing topographic complexity. (3) Changes in topography have a greater influence upon phi(1) than changes in land cover class. (4) The theta(1) seems to vary with the amount of atmospheric haze. These patterns of variation in phi(1) and theta(1) are potentially exploitable by the remote sensing community to yield stochastically independent sets of observations, characterize topography, and reduce the number of bytes needed to store remotely sensed data.

Labovitz, M. L.↗

NASA NTRS1981

Research of the state of convection in the Earth's mantle

The behavior and mechanical properties of the lithosphere are studied. Geoid heights derived from the GEOS 3 and SEASAT radar altimeters were used. The following predictive capabilities are discussed: location of unknown seamounts from the knowledge of the geoid heights; prediction of gravity field from the knowledge of the topography and past history of the relief; or insight into the history of a region from the knowledge of both topography and geoid heights. Several geographical areas were studied, including the Walvis Ridge and Rio Grande Rise in the Southern Atlantic Ocean and several seamount chains in the Central Pacific Ocean. Two main factors influence geoid height: conditions of creation and age of the lithosphere at the time of loading.

Roufosse, M. C.↗

NASA NTRS1981

Earth Survey Applications Division

Accomplishments of research and data analysis conducted to study physical parameters and processes inside the Earth and on the Earth's surface, to define techniques and systems for remotely sensing the processes and measuring the parameters of scientific and applications interest, and the transfer of promising operational applications techniques to the user community of Earth resources monitors, managers, and decision makers are described. Research areas covered include: geobotany, magnetic field modeling, crustal studies, crustal dynamics, sea surface topography, land resources, remote sensing of vegetation and soils, and hydrological sciences. Major accomplishments include: production of global maps of magnetic anomalies using Magsat data; computation of the global mean sea surface using GEOS-3 and Seasat altimetry data; delineation of the effects of topography on the interpretation of remotely-sensed data; application of snowmelt runoff models to water resources management; and mapping of snow depth over wheat growing areas using Nimbus microwave data.

Carpenter, L.↗

NASA NTRS1981

Gulf of Mexico satellite radar altimetry

The dynamic topography of the sea surface was measured. The radar altimeter measurements yield average ocean topographic data which are mapped. Seasonal deviations from a 3 year mean topography are presented. The altimeters are also instrumented with sample and hold gates which provide information about the shape and amplitude of the return waveform. Parameters including ocean surface wind speed and the significant wave height are determined. One hundred eighty six wind speed and significant wave height histograms are presented.

Parra, C. G.↗

NASA NTRS1982

Gravity and geoid anomalies of the Philippine Sea: Evidence on the depth of compensation for the negative residual water depth anomaly

A negative free-air gravity anomaly which occurs in the central part of the Philippine Sea was examined to determine the distribution and nature of possible regional mass excesses or deficiencies. Geoid anomalies from GEOS-3 observation were positive. A negative residual geoid anomaly consistent with the area of negative free-air gravity anomalies were found. Theoretical gravity-topography and geoid-topography admittance functions indicated that high density mantle at about 60 km dept could account for the magnitudes of the gravity and residual geoid anomaly and the 1 km residual water depth anomaly in the Philippine Sea. The negative residual depth anomaly may be compensated for by excess density in the uppermost mantle, but the residual geoid and regional free-air gravity anomalies and a slow surface wave velocity structure might result from low-density warm upper mantle material lying beneath the zone of high-density uppermost mantle. From a horizontal disk approximation, the depth of the low-density warm mantle was estimated to be on the order of 200 km.

Bowin, C.↗