Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “technical report”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

How Snow Drives the Seasonal Evolution of Land and Sea Surface Albedos in the Alaskan High Arctic: Final Technical Report

The purpose of the project was to observe and quantify temporal variation in snow albedo and snow characteristics across the Arctic coastal landscape as winter transitioned into spring and snowmelt occurred, both on tundra and sea ice. This transition is bounded by fully snow-covered landscapes with broadband albedos of approximately 0.8 and snow-free landscapes with albedos of 0.15 (tundra or ponded sea ice). For these landscapes, we monitored the spring surface characteristics and radiative properties nearly daily at three locations on or near the Department of Energy ARM North Slope of Alaska (NSA) User Facility in Utqiagvik, Alaska: the central NSA Facility (hereafter called ARM), one near NSA-E12 (BEO), and one on the sea ice of Elson Lagoon (ICE) during three melt seasons (2019, 2022, and 2024). The field campaign component of this award was named SALVO ( S now AL bedo E VO lution). Typical field seasons began in mid-April and lasted until mid-June. Main measurements included snow depth (at 1-m intervals), broadband albedo (at 5-m intervals), spectral albedo (at 5- m intervals), and multiple digital images. Orthomosaics were converted into binary images to determine the snow-covered fraction over time across various landscapes. Additional measurements included basic weather data and snow-ground (or ice) interface temperatures. Sky conditions were observed and photographed to help assess albedo values.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Rapid T cell engineering to counter emerging threats (Full Technical Report)

Instead of genetic engineering, we sought to determine if a rapid method of membrane protein delivery could generate functional CAR-T cells in a rapid, safer, cost-effective manner. Using cell free protein synthesis, we generated CAR proteins embedded in a nanodisc, and thus effectively solubilized the protein. We demonstrated the first functional CAR proteins outside of a cellular context. We next tested uptake into immune cells and found extremely high uptake into T cells and multiple other populations of immune cells. We found some evidence of cytotoxicity in vitro conferred by the nanodisc delivered protein.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Laboratory Investigations of Aerosol-Cloud Interactions in an Entraining, Turbulent Environment (Final Technical Report)

The effects that aerosol particles have on clouds in Earth’s atmosphere and the role that clouds play in determining the fate of aerosol particles play a crucial role in determining the human experience on this planet. These interwoven interactions can determine whether it rains or snows, is comfortable, hot or cold, or whether the cloud you gaze at in the sky looks like a tiger or a lump of porridge. How clouds mix with the air surrounding them, a process known as entrainment, further affects these processes. We conducted laboratory experiments of aerosol-cloud interactions in a setting in which we can measure the effects of entrainment – the first laboratory experiments since the pioneering work of Latham and Reed in 1977. We measured the effects of entrainment on aerosol-cloud interactions in the Pi Chamber and also used a state-of-the-art large eddy simulation (LES) to investigate processes in fine detail.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Direct solar self-catalyzing pyrolysis of natural gas to hydrogen and high-quality graphite (Final Technical Report)

This project, led by researchers at UCLA in partnership with Southwest Solar Technology (SST) and SolGrapH, successfully demonstrated a new method for producing clean hydrogen fuel and high-quality graphite using concentrated solar energy. The primary goal was to develop a technology that converts natural gas (primarily methane) into two valuable products—hydrogen gas and solid carbon—without releasing carbon dioxide (CO2) into the atmosphere. This process, known as solar thermal pyrolysis, uses heat from the sun to split the methane molecules directly.

03 NATURAL GAS↗
DOE OSTI2026

Bioinorganic Chemistry of Nitrification: Structure and Function of Ammonia Monooxygenase (Final Technical Report)

The overarching goal of this project was to elucidate biochemical mechanisms that ubiquitous microorganisms use to enable primary metabolism based on nitrification, the multi-electron oxidation of ammonia (NH 3 ) to nitrite (NO 2 – ). This chemistry enables life to substitute carbon based fuel with nitrogen. Understanding the underlying chemistry was pursued to help inform the use of ammonia as an alternative fuel source compared to petroleum, capitalizing on the widespread infrastructure for production and distribution of this substance in the US. This project specifically focused on characterizing ammonia monooxygenase, an integral membrane copper protein that initiates nitrification via the aerobic oxidation of NH 3 to hydroxylamine (NH 2 OH).

09 BIOMASS FUELS↗
DOE OSTI2025

Propulsion System Hybridization and Electrification and Energy Recovery of the Hydraulic System for a Diesel-Powered Off-Road Carry/Lift Machine Final Technical Report (FTR)

Historically, heavy-duty off-road equipment has prioritized performance, reliability, and cost, with limited emphasis on efficiency. While increasing carbon dioxide (CO 2 ) regulations have driven a focused effort for efficiency in on-road vehicles, off-road machines have remained largely overlooked, leaving significant opportunities for efficiency improvements and emissions reductions. To address this overlooked industry, Michigan Technological University’s Advanced Power Systems Research Center (APS LABS) worked with Pettibone to determine a unique electrified architecture for Pettibone’s heavy-duty off-road material handler, the Cary-Lift 204i, with a goal of 20% fuel savings. The base Cary-Lift uses a diesel engine with no electrification.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Carbon Capture Pilot at Dry Fork Power Station (Final Technical Report)

The objective of this project was to design, seek necessary approvals, build and operate a large-scale pilot sorbent-based post combustion carbon capture system (CCS) at a coal fired power generation facility. TDA’s CCS uses a highly stable, low-cost, high-capacity physical adsorbent to effectively remove CO 2 via a combination vacuum and concentration swing adsorption (VCSA) process. The CCS is integrated with the power plant flue gas exhaust, which is rich in CO 2 (~13% vol. CO 2 ) and removes more than 90% of the plant’s overall carbon emissions.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2026

High-Efficiency Solar-To-Fuel Photoelectrochemistry in Disordered Photonic Glass Electrodes (Final Technical Report)

This project investigated how photonic glass (PG) photoelectrodes—disordered arrangements of dielectric scatterers—can serve as scalable, tunable platforms for light trapping in photoelectrochemical (PEC) solar-to-fuel systems. By leveraging disorder-driven optical phenomena such as multiple scattering resonances and light localization, PG structures offer an alternative to conventional photonic crystals and inverse opals that require high structural precision. The scientific goals were to twofold: (1) develop approaches to predictive models for high performance PG electrodes based on light absorption simulations, and (2) fabricate, characterize, and optimize PG-based photoelectrodes for solar-to-hydrogen and solar-to-fuel photoelectrochemical applications. To overcome the complexity of ensemble optical simulations for disordered materials, the researchers developed a machine-learning-accelerated emulation of all configurations in the design space. With this approach, PG photoelectrodes based on a TiO2 semiconductor were designed to enhance PEC currents of up to one hundred times higher than the equivalent ultra-thin film photoanodes and several times higher than the equivalent photonic crystal. The research also explored integrated systems for electrochemical hydrogen production based on replacing water oxidation with the specific glycerol oxidation electrocatalysis. Overall, the project outlined an approach to a simple-to-fabricate photoelectrode system to drive photoelectrochemical reactions relevant to solar photochemical energy conversion.

14 SOLAR ENERGY↗
DOE OSTI2026

Catalytic Reaction Intermediates Revealed with Femtosecond M-edge XANES (Final Technical Report)

The major goals of this work were to measure the electronic structure of earth-abundant catalysts at key steps in their catalytic cycles using ultrafast UV/Visible, Extreme Ultraviolet, and X-ray spectroscopy. Our central idea was that by using these sophisticated probes, we could uncover hidden reaction mechanisms and provide guidance for catalyst design. A second major goal was the development of Extreme Ultraviolet (XUV) spectroscopy as an accessible, tabletop probe of transition metal electronic structure. Spectra in this 30-100 eV energy range probe 3d→3p transitions in 3d metals and 5p/4f→5d transitions in 5d metals, and share the oxidation state, spin state, and ligand field specificity of hard X-ray spectroscopy. The Vura-Weis group previously established the basic utility of this technique for measuring the excited-state cascades of transition metal chromophores, and in this grant we intended to extend its scope to catalytic intermediates.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Technical Report for Bayesian Optimization and Reinforcement Learning for Beam Polarization Increase in the BNL Hadron Injectors

This project developed and evaluated physics-informed Bayesian learning and machine learning (ML)-based optimization methods for improving beam polarization preservation in the BNL hadron injector chain. The work focused on uncertainty-aware digital twin modeling, Bayesian calibration of accelerator simulations using beam measurements, and data-efficient optimization strategies including Bayesian optimization and reinforcement learning. These methods were applied to injector tuning and RF control problems in realistic accelerator settings to support improved operational robustness and readiness for RHIC operations and future Electron–Ion Collider facilities. No subject inventions were disclosed under this award.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Monolithic Mesoporous Metamaterials for R-10 to R-15 Glazing (Final Scientific Technical Report)

The objective of the project was to develop and validate monolithic mesoporous metamaterials (MMMs), to which we also refer as Mesoporous Optically Clear Heat Insulators (MOCHIs) capable of serving as High-thermal-barrier Glazing (including Windows, Skylights, and Daylighting) with Transparency ≥99%, Color Rendering Index ≥99%, Haze ≤1%, Thermal Insulation per inch ≥R-15, Manufacturing Cost per Square Foot ≤$0.3; In addition, MMM-Based Frame Insulation and Glazing Products with Thermal Insulation per inch R-10 to R-15. All objectives of the project were successfully accomplished.

14 SOLAR ENERGY↗
DOE OSTI2026

Exploring Actinide Nanocrystal Growth towards Defining 5f Surface Chemistry (Final Technical Report)

When particles are very small, down to the nanometer length scale, they display unusual properties not typical of larger materials. Most of the atoms in these structures are at the surface of the particles, which give them different electronic properties. While these unusual properties have been studied in most of the periodic table, little is known about how the electronic properties of the actinides, such as neptunium and plutonium, behave when they become so small. This planned research will study growth pathways of actinide nanoscale particles. Interestingly, the shapes of the particles change depending on the specific actinide species, spanning from thorium through americium, despite having otherwise identical arrangements of atoms. This project will use differences in the shapes and growth pathways of different actinide particles to learn about trends in electronic properties at surfaces across the actinide row. Growth pathways will be determined using a combination of synthesis and the use of advanced X-ray characterization tools. These X-ray characterization tools can provide information about electronic properties and also local bonding characteristics. This project will also inform how to make unprecedented actinide oxide nanoparticles using very small quantities of material. This will enable safe working with radioactive materials and the study of materials that never before have been made into nanoparticles. Meanwhile, students will be trained in working with these exotic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Exploring Electrocatalysis of Methane on Transition Metal Surfaces (Final Technical Report)

The original primary objective of this project focused on detailed and systematic molecular-level mechanistic studies of low-temperature (~100 °C) electrochemical (EC) direct methane-to-methanol (DMTM) conversion on selected transition metal surfaces. The latter include PtRu, PdAu, and NiCu electrocatalysts. Specifically, the proposed studies aimed to test a bifunctional hypothetical DMTM reaction mechanism on these electrocatalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Bioinspired Design of Dissipative Self-Assembly of Active Materials (Final Technical Report)

The major objective of this DOE-funded research program was to establish general, experimentally validated design principles for dissipative, out-of-equilibrium self-assembly of synthetic active materials. In living systems, structures such as actin filaments and microtubules are maintained far from thermodynamic equilibrium through continuous energy consumption. This persistent nonequilibrium operation enables functions including adaptability, self-healing, directed motion, and force generation—properties that are largely absent in traditional equilibrium soft materials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Process Optimization and Real-Time Control of Synergistic Microalgae Cultivation and Wastewater Treatment (Final Technical Report)

The overarching goal of this work was to accelerate the commercialization of high productivity, mixed community microalgal treatment technologies for the synergistic treatment of wastewater and the production of biofuel feedstocks. This project addressed a critical barrier to the financial viability and energy efficiency of algal wastewater treatment: an inability to design and operate high-rate processes that reliably achieve target effluent qualities, areal productivities, and biochemical compositions (lipid, protein, carbohydrate content) despite fluctuations in wastewater composition, weather, and microbial communities. Key outcomes from this work include an optimized and controlled Advanced Biological Nutrient Recovery (ABNR) design as well as a suite of open-source tools that include a calibrated and validated algae process simulator in QSDsan and a novel low-cost, real-time microbial monitoring tool. These tools can be leveraged by other algal cultivation and wastewater treatment technology developers in future work.

09 BIOMASS FUELS↗
DOE OSTI2026

ICL Commercial Production of Lithium Iron Phosphate Cathode Powder for the Global Lithium Battery Industry Final Technical Report

ICL was investing in producing cathode active material, Lithium Iron Phosphate (LFP), used in the production of batteries for both electric vehicles and stationary storage. The demand for LFP was increasing with the global focus on sustainable energy, and there was no current manufacturer of this material in the United States. As such, imported LFP is subject to the uncertainties around supply chain and control of a foreign supplier. This investment would have allowed ICL to be a United States leader in LFP production. To gain a position in this market, ICL licensed the technology from a firm that has the process technology and has reliably supplied LFP into the battery market and currently has customers purchasing their product.

25 ENERGY STORAGE↗