Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “system model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A Hybrid-Learning Algorithm for Online Dynamic State Estimation in Multimachine Power Systems

With the increasing penetration of distributed generators in the smart grids, having knowledge of rapid real-time electromechanical dynamic states has become crucial to system stability control. Conventional Supervisory Control and Data Acquisition (SCADA)-based dynamic state estimation (DSE) techniques are limited by the slow sampling rates, while the emerging phasor measurement units (PMUs) technology enables rapid real-time measurements at network nodes. Using generator bus terminal voltages, we propose a hybrid-learning DSE (HL-DSE) algorithm to estimate the synchronous machine rotor angle and speed in real time. The HL-DSE takes the power system model into account and trains neuroestimators with real-time data in an online manner. Compared with traditional DSE methods, the HL-DSE overcomes limitations by using a data-driven approach in conjunction with the physical power system model. The time efficiency, accuracy, convergence, and robustness of the proposed algorithm are tested under noises and fault conditions in both small- and large-scale test systems. Simulation results show that the proposed HL-DSE is much more computationally efficient than widely used Kalman filter (KF)-based methods while maintaining comparable accuracy and robustness. In particular, HL-DSE is over 100 times faster than square-root unscented KF (SR-UKF) and 80 times faster than extended KF (EKF). The advantages and challenges of the HL-DSE are also discussed.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

OVERVIEW OF PARTICLE DEPOSITION MODELS FOR SPENT NUCLEAR FUEL STORAGE SYSTEMS

Deposition models were built to evaluate contaminant deposition on spent nuclear fuel (SNF) canisters. The primary contaminant of concern is chloride, which is dispersed in the atmosphere and then deposits onto the canisters. During dry storage, the primary degradation process is likely to be Chloride Induced Stress Corrosion Cracking (CISCC) at the heat-affected zones of the canister welds. It is known that stainless steel canisters are susceptible to CISCC; however, the rate of chloride deposition onto the canisters is poorly known, based on sparse field data from a small number of sites. The models presented in this study could be useful for determining the rate of deposition on the canisters and the likelihood of CISCC to help with SNF canister ageing management. The deposition models were developed with the commercial computational fluid dynamics (CFD) code STAR-CCM+. Various deposition mechanisms were considered and incorporated into the models, and a sensitivity study was conducted to determine the most important mechanisms for deposition within a SNF storage system. The models included both a vertical and horizontal configuration storage system: NAC International’s Modular, Advanced Generation, Nuclear All-purpose STORage System (MAGNASTOR®) and a NUHOMS® horizontal storage module respectively. The resulting canister deposition on the horizontal canister is visually compared with inspection data taken onsite at the Calvert Cliffs Nuclear Power Plant. These models are preliminary, and development of the models will continue. Future validation exercises are currently being planned, including the Canister Deposition Field Demonstration (CDFD) effort funded by U.S. Department of Energy office of Nuclear Energy office of Spent Fuel Waste Science and Technology. The goal of the modeling presented is to demonstrate a potential modeling technique that could be used to plan and inform SNF canister ageing management programs with predictive models for the timing and occurrence of canister CISCC.

Suffield, Sarah R.↗
DOE OSTI2025

Assessing Simulations of Forest Hurricane Disturbance and Recovery in Puerto Rico by ELM-FATES Using Field Measurements

In the past three decades, Puerto Rico (PR) experienced five hurricanes that met or exceeded category three, and they caused severe forest structural damage and elevated tree mortality. To improve our mechanistic understanding of hurricane impacts on tropical forests and assess hurricane-affected forest dynamics in Earth system models, we use in situ forest measurements at the Bisley Experimental Watersheds in Northeast PR to evaluate the Functionally Assembled Terrestrial Ecosystem Simulator coupled with the Energy Exascale Earth System Model Land Model (ELM-FATES). The observations show that before Hurricane Hugo, 77.3% of the aboveground biomass (AGB) is from the shade-tolerant plant function type (PFT). The Hugo-induced mortality rates are over ~50%, and they induce a ~39% AGB reduction, which recovers to a level like the pre-Hugo condition in 2014, following a second, lower intensity hurricane, Georges. We perform numerical experiments that simulate damage from Hugo and Georges on the forests, including defoliation, sapwood and structural biomass damage, and hurricane-induced mortality. ELM-FATES can reasonably represent coexistence between the two PFTs–light-demanding and shade-tolerant–for both the pre-Hugo and post-Hugo conditions. The model represents a reasonable size distribution of mid-and large-sized trees although it underestimates AGB, likely due to the overestimated nonhurricane mortality. ELM-FATES temporarily stimulated leaf biomass and diameter increment after Georges, an effect that should be tested with observations of future hurricane defoliation events. This research indicates that addressing model-data mismatches in tree mortality and understory dynamics are essential to simulation of more extreme hurricane effects under climate change.

58 GEOSCIENCES↗
DOE OSTI2023

Isolating the effect of biomass burning aerosol emissions on 20th century hydroclimate in South America and Southeast Asia

Abstract Biomass burning is a significant source of aerosol emissions in some regions and has a considerable impact on regional climate. Earth system model simulations indicate that increased biomass burning aerosol emissions contributed to statistically significant decreases in tropical precipitation over the 20th century. In this study, we use the Community Earth System Model version 1 Large Ensemble (CESM1-LENS) experiment to evaluate the mechanisms by which biomass burning aerosol contributed to decreased tropical precipitation, with a focus on South America and Southeast Asia. We analyze the all-but-one forcing simulations in which biomass burning aerosol emissions are held constant while other forcings (e.g., greenhouse gas concentrations) vary throughout the 20th century. This allows us to isolate the influence of biomass burning aerosol on processes that contribute to decreasing precipitation, including cloud microphysics, the radiative effects of absorbing aerosol particles, and alterations in regional circulation. We also show that the 20th century reduction in precipitation identified in the CESM1-LENS historical and biomass burning experiments is consistent across Coupled Model Intercomparison Project Phase 5 models with interactive aerosol schemes and the CESM2 single-forcing experiment. Our results demonstrate that higher concentrations of biomass burning aerosol increases the quantity of cloud condensation nuclei and cloud droplets, limiting cloud droplet size and precipitation formation. Additionally, absorbing aerosols (e.g., black carbon) contribute to a warmer cloud layer, which promotes cloud evaporation, increases atmospheric stability, and alters regional circulation patterns. Corresponding convectively coupled circulation responses, particularly over the tropical Andes, contribute to further reducing the flow of moisture and moisture convergence over tropical land. These results elucidate the processes that affect the water cycle in regions prone to biomass burning and inform our understanding of how future changes in aerosol emissions may impact tropical precipitation over the 21st century.

Environmental Sciences & Ecology↗
DOE OSTI2023

Phase coexistence implications of violating Newton’s third law

Newton’s third law, action = reaction, is a foundational statement of classical mechanics. However, in natural and living systems, this law appears to be routinely violated for constituents interacting in a nonequilibrium environment. Here, we use computer simulations to explore the macroscopic phase behavior implications of breaking microscopic interaction reciprocity for a simple model system. We consider a binary mixture of attractive particles and introduce a parameter that is a continuous measure of the degree to which interaction reciprocity is broken. In the reciprocal limit, the species are indistinguishable, and the system phase separates into domains with distinct densities and identical compositions. Furthermore, increasing nonreciprocity is found to drive the system to explore a rich assortment of phases, including phases with strong composition asymmetries and three-phase coexistence. Many of the states induced by these forces, including traveling crystals and liquids, have no equilibrium analogs. By mapping the complete phase diagram for this model system and characterizing these unique phases, our findings offer a concrete path forward toward understanding how nonreciprocity shapes the structures found in living systems and how this might be leveraged in the design of synthetic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Advancing the Understanding of Cloud Microphysical Processes and Aerosol Indirect Effects in High-Latitude Mixed-Phase Clouds by Linking ARM Measurements with Climate Model Simulations (Final Report)

The key objectives of this project were to advance our understanding of cloud microphysical characteristics and aerosol indirect effects on mixed-phase clouds in high latitudes. To improve the representation of ice and mixed-phase clouds in Earth System Models (ESMs), we propose an integrated observation and modeling study of cloud macro- and microphysical properties, including spatial heterogeneities, mass partitioning between ice crystals and supercooled liquid water, effects of ice nucleating particles (INPs), and efficiency of secondary ice production (SIP), etc. Specifically, we took four main approaches in this project: (1) examining macro- and microphysical properties of ice and mixed-phase clouds based on in-situ and ground-based observations from multiple field campaigns funded by the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) program, including the Mixed-Phase Arctic Cloud Experiment (M-PACE), Indirect and Semi-Direct Aerosol Campaign (ISDAC), Ice Nucleating Particle Sources at Oliktok Point (INPOP), ARM West Antarctic Radiation Experiment (AWARE), Measurements of Aerosols, Radiation, and Clouds over the Southern Ocean (MARCUS), and Macquarie Island Cloud and Radiation Experiment (MICRE); (2) evaluating the DOE Energy Exascale Earth System Model (E3SM) simulations based on observations, particularly for ice and mixed-phase cloud microphysical properties; (3) examining the impacts of INPs on ice and mixed-phase clouds. Specifically, a series of comparisons were conducted using observations over the Arctic, Southern Ocean, and Antarctica, including comparisons between the lower and higher southern latitudes as well as comparisons between the northern and southern hemispheres. In addition, aerosol indirect effects from distinct sources of dust particles were examined; and (4) investigating the impacts of SIP. Ultimately, these results helped to improve cloud microphysics and aerosol-cloud interaction parameterizations in the E3SM model. Overall, the project provided improved understanding regarding various factors, including thermodynamic, dynamic, and aerosol conditions, on the micro- and macrophysical properties of ice and mixed-phase clouds in the high latitudes. Resulting analysis helped to provide an improved physical basis for refining the current cloud microphysics parameterizations related to ice and mixed-phase clouds in E3SM.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Probing Metastable Domain Dynamics via Automated Experimentation in Piezoresponse Force Microscopy

The dynamics of complex topological defects in ferroelectric materials is explored using automated experimentation in piezoresponse force microscopy. Specifically, a complex trigger system (i.e., “FerroBot”) is employed to study metastable domain-wall dynamics in Pb 0.6 Sr 0.4 TiO 3 thin films. Several regimes of superdomain wall dynamics have been identified, including smooth domain-wall motion and significant reconfiguration of the domain structures. We have further demonstrated that microscopic mechanisms of the domain-wall dynamics can be identified; i.e., domain-wall bending can be separated from irreversible domain reconfiguration regimes. In conjunction, phase-field modeling was used to corroborate the observed mechanisms. As such, the observed superdomain dynamics can provide a model system for classical ferroelectric dynamics, much like how colloidal crystals provide a model system for atomic and molecular systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Machine learning feature analysis illuminates disparity between E3SM climate models and observed climate change

In September of 2020, Arctic sea ice extent was the second-lowest on record. State of the art climate prediction uses Earth system models (ESMs), driven by systems of differential equations representing the laws of physics. Previously, these models have tended to underestimate Arctic sea ice loss. The issue is grave because accurate modeling is critical for economic, ecological, and geopolitical planning. We use machine learning techniques, including random forest regression and Gini importance, to show that the Energy Exascale Earth System Model (E3SM) relies too heavily on just one of the ten chosen climatological quantities to predict September sea ice averages. Furthermore, E3SM gives too much importance to six of those quantities when compared to observed data. Finally, identifying the features that climate models incorrectly rely on should allow climatologists to improve prediction accuracy.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Developing a simulator-based satellite dataset for using machine learning techniques to derive aerosol-cloud-precipitation interactions in models and observations in a consistent framework

Aerosol-cloud-precipitation interactions (ACPI) remain a major uncertainty in understanding the Earth’s radiation budget and water cycle (including extremes). After decades of active research, various observationally based metrics have been developed to constrain ACPI in Earth System Models (ESMs), but direct comparison of model and data estimates can confound scientific understanding because limitations and uncertainties in sampling and retrieval procedures may combine with model deficiencies in process representations of ACPI to obstruct understanding. Furthermore, conventional ACPI metrics often vary from one regime to another, and the ACPI process representation in ESMs is also typically derived based on only a limited area/regime (even though the parameterization applies globally). To bridge the gap between models and data and to correctly describe ACPI in all regimes, we propose to construct a new CALIPSO-CloudSat merged dataset that is produced by the same algorithms used in satellite simulators in ESMs, and to use machine learning techniques to derive new ACPI metrics that can be accurately estimated by satellites and can provide meaningful constraints on cloud microphysical process representations in ESMs. The dataset will include measured and retrieved variables for aerosol, cloud, and precipitation from CALIPSO and CloudSat, and environmental variables from meteorological reanalysis. The data will be used to train a neural network to construct the ACPI metrics as a function of environmental conditions. The new ACPI formula will be used to constrain the ACPI in the Energy Exascale Earth System Model (E3SM), and to augment/reformulate the ACPI process representation in the E3SM to improve the simulation of the evolution of the atmosphere under different environmental conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Impact of Turbulence Representation on the Relationship Between Cloud Feedback and Aerosol‐Cloud Interaction in an E3SMv2 Perturbed Parameter Ensemble

Recent studies reveal an anti‐correlation between global cloud feedback (CF) and effective radiative forcing due to aerosol‐cloud interaction (ERFaci) in Earth system models, but the physical mechanisms underlying it remain uncertain. Here we investigate how different turbulence representations contribute to this relationship over the global ocean using an ensemble of Energy Exascale Earth System Model version 2 simulations with perturbed turbulence parameters. The anti‐correlation appears only in the tropical ascent regime. In the Northern Hemisphere midlatitude and high latitude regimes, there is no significant correlation, and in the tropical marine low cloud and Southern Ocean regimes, the correlation is positive. These opposite correlations are primarily driven by opposing CF responses to perturbed parameters. We find that the mean‐state turbulent mixing strength affects both CF and ERFaci, enabling strong correlations in certain regimes. This study highlights the complex linkages between CF and ERFaci through turbulent processes across diverse cloud regimes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Hydrogen Adsorption, Reactivity, and Catalysis on Colloidal Iron Carbide Nanoparticles

Supported iron carbide particles have long served as catalysts for CO hydrogenation (the Fischer Tropsch synthesis, FTS) and continue to be attractive. Despite this, little is known about their chemistry. Reported here is a colloidal Fe x C nanoparticle (NP) model system that allows direct observation of surface hydrogen and CO, as well as quantification of the surface H. Dodecylamine-capped Fe x C NPs (DDA-Fe x C NPs) were synthesized through solution-phase carburization of Fe NPs and form stable colloids in low-polarity organic solvents. Treatment of these colloids with H 2 or D 2 produced highly hydrogenated materials, and FTIR spectra of DDA-Fe x C-D n showed that most of the D binds to carbides, with at least four distinct v(C-D) modes. The surface C-H(D) bonds were all reactive, transferring hydrogen to alkenes and other reagents in solution. Titration and ICP measurements showed a 0.17:1 ratio of added H:total Fe, or roughly. 40 H per 1.8 nm DDA-Fe x C NP. Conversely, CO was preferentially bound to surface Fe sites, with FTIR spectra showing a single broad v(CO) that shifted with CO coverage or co-adsorption of H 2 . The DDA-Fe x C NPs were active catalysts for both olefin hydrogenation and the FTS, under mild conditions and without catalyst pre-treatment. The CO hydrogenation reactions yielded a broad distribution of long-chain linear paraffins and olefins. Though quantitative comparisons with typical FTS results are not possible because of our use of sealed batch reactors and other factors, the observations of high catalytic reactivity demonstrate the relevance of this model system to iron-carbide catalysis. DFT calculations on model slab surfaces with varying iron carbide stoichiometries revealed that the thermodynamically preferred surface adsorption sites are C for H ads and Fe for CO ads . A variety of binding sites and binding energies were found for each adsorbate. We are unaware of previous studies indicating that a diverse array of C-H bonds is the primary source of reactive H on iron carbides. Experimentally, the diversity of *C-H sites was evident in reactions with H-atom donors and abstractors of different strengths, from both the reaction stoichiometries and IR spectra. The different surface–H binding energies correlate with the v(C-D) stretching frequencies. Furthermore, these insights into complex iron carbide surfaces and catalysis could assist catalyst design, and they showcase the importance of stoichiometric studies of reaction intermediates.

08 HYDROGEN↗
DOE OSTI2020

Adaptive Recovery Model: Designing Systems for Testing Tracing and Vaccination to Support COVID-19 Recovery Planning.

This report documents a new approach to designing disease control policies that allocate scarce testing, contact tracing, and vaccination resources to better control community transmission of COVID19 or similar diseases. The Adaptive Recovery Model (ARM) combines a deterministic compartmental disease model with a stochastic network disease propagation model to enable us to simulate COVID-19 community spread through the lens of two complementary modeling motifs. ARM contact networks are derived from cell-phone location data that have been anonymized and interpreted as individual arrivals to specic public locations. Modeling disease spread over these networks allows us to identify locations within communities conducive to rapid disease spread. ARM applies this model- and data-derived abstractions of community transmission to evaluate the effectiveness of disease control measures including targeted social distancing, contact tracing, testing and vaccination. The architecture of ARM provides a unique capacity to help decision makers understand how best to deploy scarce testing, tracing and vaccination resources to minimize disease-spread potential in a community. This document details the novel mathematical formulations underlying ARM, presents a dynamical stability analysis of the deterministic model components, a sensitivity analysis of control parameters and network structure, and summarizes a process for deriving contact networks from cell-phone location data. An example use case steps through applying ARM to evaluate three targeted social distancing policies using Bernalillo County, New Mexico as an exemplar test locale. This step-by-step analysis demonstrates how ARM can be used to measure the relative performance of competing public health policies. Initial scenario tests of ARM shows that ARMs design focus on resource utilization rather than simple incidence prediction can provide decision makers with additional quantitative guidance for managing ongoing public health emergencies and planning future responses.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Physics-Informed Learning for Predictive Multi-Scale Modeling of Water Cycle and Extreme Events

Climate and earth system models have limited skill in predicting water cycle and associated extremes such as intense rain- and wind-producing storms and resulting hazards across all timescales. Water cycle predictions are inherently limited by the predictability of the chaotic system, but large potential for improving predictions remains untapped due to limited use of data-model integration to improve predictive modeling. This white paper proposes a hybrid data-physics paradigm based on physics-informed neural networks (PINNs) to improve the Energy Exascale Earth System Model (E3SM). In particular, we aim to predict and quantify uncertainties of water cycle processes and low probability high impact events.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Improving climate model coupling through a complete mesh representation: a case study with E3SM (v1) and MOAB (v5.x)

One of the fundamental factors contributing to the spatiotemporal inaccuracy in climate modeling is the mapping of solution field data between different discretizations and numerical grids used in the coupled component models. The typical climate computational workflow involves evaluation and serialization of the remapping weights during the preprocessing step, which is then consumed by the coupled driver infrastructure during simulation to compute field projections. Tools like Earth System Modeling Framework (ESMF) and TempestRemap offer capability to generate conservative remapping weights, while the Model Coupling Toolkit (MCT) that is utilized in many production climate models exposes functionality to make use of the operators to solve the coupled problem. However, such multistep processes present several hurdles in terms of the scientific workflow and impede research productivity. In order to overcome these limitations, we present a fully integrated infrastructure based on the Mesh Oriented datABase (MOAB) library, which allows for a complete description of the numerical grids and solution data used in each submodel. Through a scalable advancing-front intersection algorithm, the supermesh of the source and target grids are computed, which is then used to assemble the high-order, conservative, and monotonicity-preserving remapping weights between discretization specifications. The Fortran-compatible interfaces in MOAB are utilized to directly link the submodels in the Energy Exascale Earth System Model (E3SM) to enable online remapping strategies in order to simplify the coupled workflow process. We demonstrate the superior computational efficiency of the remapping algorithms in comparison with other state-of-the-science tools and present strong scaling results on large-scale machines for computing remapping weights between the spectral element atmosphere and finite volume discretizations on the polygonal ocean grids.

58 GEOSCIENCES↗
DOE OSTI2023

DFT (and DMFT) for DFT users

The interesting properties of f -electron systems comes from a simultaneous existence of free and discrete level electrons. The challenge we have is to describe free electrons and discrete level electrons equally well in a unified picture. The ELF index can be used to find regions in real space where discrete level physics needs to be taken into account. We have identified the HO gas as a model system that can be used to gain insight about this kind of physics. We will use the HO gas model system for creating a functional suitable for these systems via the subsystem functional scheme. With a predictive capability for the rare earths and lanthindes, we can identify new materials with new/improved properties. This is crucial for, e.g., developing material and technology substitutes for addressing the challenges associated with the use of rare earth elements and other critical materials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

CMIP7 Data Request: atmosphere priorities and opportunities

This paper presents a comprehensive overview of the Coupled Model Intercomparison Project Phase 7 (CMIP7) request for data unlocking key research avenues in atmospheric science and provides justification for the resources needed to produce this data. Topics within the CMIP7 Atmosphere Theme centre around processes and feedbacks in atmospheric science such as clouds, aerosols and atmospheric chemistry, atmospheric circulation, temperature variability and extremes, radiative forcings, and Earth system model evaluation. These topics are summarised in this paper as scientific “opportunities” which will be realised through CMIP7 experiments and Earth system model outputs. These opportunities were submitted by a thematic group of atmospheric science community representatives combined with an extended consultation process. The production of these variables will close key gaps and uncertainties identified during previous rounds of CMIP, and will be broadly used by scientific, policy, governmental, industry, and other communities that rely on climate model projections for research and decision making, including supporting the 7th Intergovernmental Panel on Climate Change Assessment Report (AR7). As an author group, we also reflect on the process used to collate this data request and make recommendations to future CMIP governance on implementing a consultation on this scale in the future.

58 GEOSCIENCES↗
DOE OSTI2024

Cloud response to co-condensation of water and organic vapors over the boreal forest

Abstract. Accounting for the condensation of organic vapors along with water vapor (co-condensation) has been shown in adiabatic cloud parcel model (CPM) simulations to enhance the number of aerosol particles that activate to form cloud droplets. The boreal forest is an important source of biogenic organic vapors, but the role of these vapors in co-condensation has not been systematically investigated. In this work, the environmental conditions under which strong co-condensation-driven cloud droplet number enhancements would be expected over the boreal biome are identified. Recent measurement technology, specifically the Filter Inlet for Gases and AEROsols (FIGAERO) coupled to an iodide-adduct chemical ionization mass spectrometer (I-CIMS), is utilized to construct volatility distributions of the boreal atmospheric organics. Then, a suite of CPM simulations initialized with a comprehensive set of concurrent aerosol observations collected in the boreal forest of Finland during spring 2014 is performed. The degree to which co-condensation impacts droplet formation in the model is shown to be dependent on the initialization of temperature, relative humidity, updraft velocity, aerosol size distribution, organic vapor concentration, and the volatility distribution. The predicted median enhancements in cloud droplet number concentration (CDNC) due to accounting for the co-condensation of water and organics fall on average between 16 % and 22 %. This corresponds to activating particles 10–16 nm smaller in dry diameter that would otherwise remain as interstitial aerosol. The highest CDNC enhancements (ΔCDNC) are predicted in the presence of a nascent ultrafine aerosol mode with a geometric mean diameter of ∼ 40 nm and no clear Hoppel minimum, indicative of pristine environments with a source of ultrafine particles (e.g., via new particle formation processes). Such aerosol size distributions are observed 30 %–40 % of the time in the studied boreal forest environment in spring and fall when new particle formation frequency is the highest. To evaluate the frequencies with which such distributions are experienced by an Earth system model over the whole boreal biome, 5 years of UK Earth System Model (UKESM1) simulations are further used. The frequencies are substantially lower than those observed at the boreal forest measurement site (< 6 % of the time), and the positive values, peaking in spring, are modeled only over Fennoscandia and the western parts of Siberia. Overall, the similarities in the size distributions between observed and modeled (UKESM1) are limited, which would limit the ability of this model, or any model with a similar aerosol representation, to project the climate relevance of co-condensation over the boreal forest. For the critical aerosol size distribution regime, ΔCDNC is shown to be sensitive to the concentrations of semi-volatile and some intermediate-volatility organic compounds (SVOCs and IVOCs), especially when the overall particle surface area is low. The magnitudes of ΔCDNC remain less affected by the more volatile vapors such as formic acid and extremely low- and low-volatility organic compounds (ELVOCs and LVOCs). The reasons for this are that most volatile organic vapors condense inefficiently due to their high volatility below the cloud base, and the concentrations of LVOCs and ELVOCs are too low to gain significant concentrations of soluble mass to reduce the critical supersaturations enough for droplet activation to occur. A reduction in the critical supersaturation caused by organic condensation emerges as the main driver of the modeled ΔCDNC. The results highlight the potential significance of co-condensation in pristine boreal environments close to sources of fresh ultrafine particles. For accurate predictions of co-condensation effects on CDNC, also in larger-scale models, an accurate representation of the aerosol size distribution is critical. Further studies targeted at finding observational evidence and constraints for co-condensation in the field are encouraged.

54 ENVIRONMENTAL SCIENCES↗