Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface mechanics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Simulating Oxidation of Carbon Surfaces by Atomic Oxygen Coupled with a Finite Rate Oxidation Model

Oxidation is a prominent factor in degradation of carbon based ablative materials at high temperatures, resulting in mass loss and material recession through chemical and mechanical erosion. In this paper, a finite rate carbon oxidation model coupled with surface recession is implemented in the Porous Ablation and Thermal Response (Panther) software to investigate carbon oxidation by atomic oxygen over a range of temperatures and pressures. Panther is utilized to investigate the finite rate oxidation model proposed by Swaminathan-Gopalan et al. at conditions of higher pressure and flux relative to the experiments it was built on.

Kirmanoglu, Kaan K.↗
DOE OSTI2021

Evolution of Metastable Phases During Mg Metal Corrosion: An In Situ Cryogenic X-ray Photoelectron Spectroscopy Study

Magnesium and its alloys are potential structural materials candidates for a wide variety of applications due to their high strength-to-weight ratio. However, ductility and poor corrosion resistance under ambient environmental conditions are the bottleneck for industrial deployment. Designing passivation layers and/or corrosion resistant alloys requires fundamental understanding of the corrosion process. The traditional ex-situ spectroscopic measurements of polycrystalline metal surface with ubiquitous surface impurities and grain boundaries only provided an indistinct view of the corrosion process. To clearly distinguish the mechanism and sequence of corrosion process, we employed in-situ cryo-based x-ray photoelectron spectroscopy (XPS) measurements on Mg single crystal surface exposed to aqueous salt solution. Clean Mg (0001) surfaces were exposed to pure D2O and NaCl aqueous solution (5 wt% NaCl+95 wt% D2O). The interfacial reactions were studied using multimodal analysis including XPS, x-ray diffraction (XRD) and scanning electron microscopy (SEM). In contrast to previous studies, our experiments demonstrated the formation of magnesium chloride hydroxide hydrate during aqueous salt corrosion processes. Evidence of metastable ClO* radicals were also found during the initial aqueous salt solution exposure.

Shutthanandan, Vaithiyalingam↗
DOE OSTI2026

A Robust Methodology to Elucidate Kinetics of Room Temperature Electrochemical Propane Adsorption on Platinum

Electrocatalytic activation of alkanes can further decarbonize chemical manufacturing by leveraging affordable renewable electricity and readily available shale gas reserves in the United States. Earlier works have identified the unique role of Pt in adsorbing and activating alkanes, like propane, at room temperature in acidic, aqueous electrolytes, revealing spontaneous formation of deeply dehydrogenated propane-derived surface species with an intact C 3 - backbone. Although an adsorption mechanism was hypothesized, it has not been explicitly investigated to date, preventing the quantification of kinetic rate parameters. A robust methodology to investigate and benchmark propane adsorption kinetics on Pt is critical for the rational design of electrocatalysts that exhibit higher selectivity toward desired partially oxidized products. Herein, we analyze an oxidative current transience that appears during the adsorption of propane on Pt in aqueous electrochemical conditions and develop a methodology that elucidates the adsorption mechanism and enables quantification of rate parameters such as order dependences and apparent activation barriers. This method yields an expected first-order dependence with respect to propane concentration at low coverage and reveals a second-order dependence with respect to the concentration of surface active sites. Additionally, the apparent activation barrier for propane adsorption was calculated using an Arrhenius analysis of the current transience under temperature control. The experimentally measured activation barrier of 35 kJ mol –1 is in excellent agreement with the theoretical barrier calculated by density functional theory (DFT). The kinetic analysis was extended, via the use of transition state theory, to extract entropy and enthalpy of activation, yielding consistent results with the proposed two-step adsorption mechanism and DFT calculations. These results demonstrate reliable quantification of kinetic parameters for electrocatalytic activation of C–H bonds in alkanes that can be employed for rational catalyst development for a versatile range of electrocatalytic conditions.

alkane activation↗
DOE OSTI2023

Effects of crystallographic orientation on calcite dissolution under alkaline conditions

Here, this study investigates the dissolution of calcite’s (104) and (100) surfaces under alkaline conditions (pH 8.8–13.1) using vertical scanning interferometry under flow-through conditions. The dissolution rate of (100) surfaces decreases with increasing pH. For example, the dissolution rate at pH 8.8 is more than 20 times higher than that at pH 13.1. In contrast, the dissolution rate of (104) surfaces is far less sensitive to pH. We explain these observations as being on account of the preferential adsorption of [OH – ] on (100) surfaces, inhibiting their dissolution. Particularly, this is because Ca-surface sites on (100) surfaces are less coordinated and have a stronger tendency for [OH – ] adsorption. As a result, (100) surfaces dissolve nearly twice as fast as (104) surfaces at pH 8.8, whereas (104) surfaces dissolved ~4.5 times faster than (100) surfaces at pH 13.1; indicating an inversion in dissolution behavior. The dissolution rate of (104) surfaces at pH 13.1 is 60 % of the rate at pH 10–12 because of the formation of slow dissolving microfacets of other orientations. The rhombohedral dissolution etch-pits formed on (104) surfaces, at lower pH’s, disappeared upon exposure to solutions with pH > 12 and were replaced by protrusions. The addition of up to 4m (molality) NaCl enhances the dissolution of (104) surfaces at pH 8.8–13.1 and (100) surfaces at pH 8.8–11.0, and inhibited the dissolution of (100) surfaces at pH = 12.0–13.1. In addition, the competing adsorption between OH – and CO 3 2– species mitigates the inhibition effects of CO 3 2– on both surfaces at pH 13.1 compared to pH 11, and the dissolution of (100) surfaces is far less affected by CO 3 2– than (104) surfaces. These results provide new insights into the rates and mechanisms of how crystallographic orientations affect calcite’s dissolution at alkaline pH conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Facet-dependent growth and dissolution of hematite resulting from autocatalytic interactions with Fe(II) and oxalic acid

The ability to simultaneously monitor the flux of iron atoms within the solution and solid phases can provide considerable insight into mechanisms of iron oxide mineral transformations. The autocatalytic interaction between hematite and Fe(II)-oxalate has long been of interest for its environmental and industrial relevance. In this study we take advantage of iron isotopic labelling and mass-sensitive imaging at the single particle scale to determine how changes in solution composition correlate with the morphologic evolution of faceted, micrometer-sized hematite platelets. Net dissolution is confirmed through analyses of aqueous iron chemistry, as well as by quantitative atomic force microscopy. Isotopic mapping techniques show that Fe(II) readily adsorbs to (001) and (012) surfaces in the absence of oxalate, but when oxalate is present selective dissolution of the (001) surface prevails and 57Fe deposition via recrystallization is not observed. Comparison between particle microtopographies following reaction with Fe(II), oxalate, and Fe(II)-oxalate show substantially different behavior, consistent with distinct mechanisms of interaction with hematite surfaces. The extensive characterization conducted on the coupled solution/solid dynamics in this system provides new insight for distinguishing crystal growth, dissolution, and recrystallization processes.

Taylor, Sandra D. [BATTELLE (PACIFIC NW LAB)]↗
DOE OSTI2021

Direct Observation of Interfacial Mechanical Failure in Thiophosphate Solid Electrolytes with Operando X-Ray Tomography

Herein, the mechanical behaviors of Li 10 GeP 2 S 12 (LGPS) solid electrolytes during electrochemical cycling using operando X-ray tomography are investigated. It is demonstrated that the bulk mechanical decomposition of LGPS when cycled against lithium is a direct result of electrochemical reduction of the solid electrolyte at the LGPS/Li 0 interface. The reductive decomposition of LGPS during lithium plating results in the formation of low-density domains at the electrode/electrolyte interface, which impose sufficient mechanical stress on the underlying LGPS to crack the SE pellet. The critical stress developed prior to pellet fracture is significantly lower than the bulk shear modulus of LGPS, suggesting that the electrochemical instability of LGPS dramatically worsens the mechanical stability of the material near the LGPS/Li 0 interface. It is also shown that the application of a highly concentrated liquid electrolyte to the LGPS surface suppresses the reductive decomposition of LGPS, improving both the electrochemical performance and mechanical stability of the bulk LGPS solid electrolyte.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Mechanistic Pathways for the Molecular Step Growth of Calcium Oxalate Monohydrate Crystal Revealed by In Situ Liquid-Phase Atomic Force Microscopy

Calcium oxalate monohydrate (COM) crystal is the most common crystalline component of human kidney stones. The molecular-scale inhibitory mechanisms of COM crystal growth by urinary biomolecules such as citrate and osteopontin adsorbed onto the crystal surface are now well understood. However, the pathways by which dissolved calcium and oxalate ions are incorporated into the molecular step of the COM crystal surface, leading to COM crystal growth—a prerequisite to be elucidated for developing effective therapeutics to inhibit COM stones—remain unknown. Here, using in situ liquid-phase atomic microscopy along with a step kinetic model, we reveal the pathways of the calcium and oxalate ions into the COM molecular step via the growth speed analysis of the molecular steps with respect to their step width at the nanoscale. Our results show that, primarily, the ions are adsorbed onto the terrace of the crystal surface from the solution—the rate-controlling stage for the molecular step growth, i.e., COM crystal growth—and then diffuse over it and are eventually incorporated into the steps. This primary pathway of the ions is unaffected by the model peptide D-Asp6 adsorbed on the COM crystal surface, suggesting that urinary biomolecules will not alter the pathway. These new findings rendering an essential understanding of the fundamental growth mechanism of COM crystal at the nanoscale provide crucial insights beneficial to the development of effective therapeutics for COM kidney stones.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

A structural model of the long-term degradation of the concrete biological shield

The concrete biological shield (CBS) of light water reactors is exposed to high neutron radiation dose in the long term, which may lead to the degradation of the concrete’s mechanical properties. Given the important shielding role of the CBS, it is necessary to investigate the irradiation effects at the structural scale and provide estimates of the damage extent from the wall’s inner surface to study potential license renewals. For this purpose, we developed a mechanical model accounting for radiation-induced expansion, creep, and damage in concrete using the Grizzly finite element code, informed by ex-core neutron flux calculations using the VERA tool. The model was applied to a 3D CBS structure represented by the CBS wall, a steel liner, reinforcement bars, and a concrete base mat and evaluated damage at 40, 60, and 80 years of operation. The VERA model predicted a maximum fluence of approximately 2 x 10 19 ncm -2 at 80 years of operation. The results showed that damage is highest at the inner surface of the CBS wall and gradually decreases with depth. It extends beyond the rebar after 60 years and reaches a depth of approximately 12 cm at 80 years.

42 ENGINEERING↗
DOE OSTI2025

Structure Sensitivity and Catalyst Restructuring for CO2 Electro-reduction on Copper

Abstract Cu is the most promising metal catalyst for CO 2 electroreduction (CO 2 RR) to multi-carbon products, yet the structure sensitivity of the reaction and the stability versus restructuring of the catalyst surface under reaction conditions remain controversial. Here, atomic scale simulations of surface energies and reaction pathway kinetics supported by experimental evidence unveil that CO 2 RR does not take place on perfect planar Cu(111) and Cu(100) surfaces but rather on steps or kinks. These planar surfaces tend to restructure in reaction conditions to the active stepped surfaces, with the strong binding of CO on defective sites acting as a thermodynamic driving force. Notably, we identify that the square motifs adjacent to defects, not the defects themselves, as the active sites for CO 2 RR via synergistic effect. We evaluate these mechanisms against experiments of CO 2 RR on ultra-high vacuum-prepared ultraclean Cu surfaces, uncovering the crucial role of step-edge orientation in steering selectivity. Overall, our study refines the structural sensitivity of CO 2 RR on Cu at the atomic level, highlights the self-activation mechanism and elucidates the origin of in situ restructuring of Cu surfaces during the reaction.

Science & Technology - Other Topics↗
DOE OSTI2020

Capturing Deuteration Effects in a Molecular Mechanics Force Field: Deuterated THF and the THF–Water Miscibility Gap

Deuteration is a common chemical modification used in conjunction with experiments such as neutron scattering, NMR, and Fourier-transform infrared for the study of molecular systems. Under the Born–Oppenheimer (BO) approximation, while the underlying potential energy surface remains unchanged by isotopic substitutions, isotopic substitution still alters intramolecular vibrations, which in turn may alter intermolecular interactions. Molecular mechanics (MM) force fields used in classical molecular dynamics simulations are assumed to represent local approximations of the BO potential energy surfaces, and hence, MD simulations using simple isotopic mass substitutions should capture BO-compatible isotope effects. However, standard MM force-field parameterizations do not directly fit to the local harmonic quantum mechanical (QM) Hessian that describes the BO surface, but rather to QM normal-modes and/or mass-dependent internal-coordinate derived distortion energies. In this study, using tetrahydrofuran (THF)–water mixtures as our model system, we show that not only does a simple mass-substitution approach fail to capture an experimentally characterized deuteration effect (the loss of the closed-loop miscibility gap associated with the complete deuteration of THF) but also it is necessary to generate new MM force-field parameters that correctly describe isotopic dependent vibrations to capture the experimental deuteration effect. We show that the origin of this failure is a result of using mass-dependent features to fit the THF MM force field, which unintentionally biases the bonded terms of the force field to represent only the isotopologue used during the original force-field parameterization. In addition, we make use of our isotopologue-corrected force field for D 8 THF to examine the molecular origins of the isotope-dependent loss of the THF–water miscibility gap.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Substrate matters: Coupled phonon modes of a spherical particle on a substrate probed with EELS

Using vibrational electron energy loss spectroscopy (vib-EELS) combined with numerical modeling, we investigate the physical mechanisms governing the phonon coupling between a spherical particle sustaining multipolar surface phonon modes and an underlying thin film. Depending upon their dielectric composition, a variety of hybrid phonon modes arise in the EEL spectrum due to the interaction between polarization charges in the particle and film. Mirror charge effects and phonon mode hybridization are the active mechanisms acting on dielectric and metallic-type films, respectively. Furthermore, processes beyond dipole-dipole interactions are required to describe the sphere-film coupling.

Localized surface phonon response↗
DOE OSTI2020

B 2 H 6 splitting on catalytic surfaces and role of BH 3 towards hydrogen spillover

A fundamental understanding of the spillover mechanism is an open and challenging problem and plays an important role in catalysis. In particular, bond-exchange spillover mechanism is considered to be effective for reversible storage and release of hydrogen at near ambient conditions. For this, three critical steps are needed: finding the right support (acceptor), the right catalyst to split H 2 , and ensuring that once H 2 is split, the H atoms can migrate on the surface with the help of secondary catalysts and eventually hydrogenate the entire material. In this paper we address these challenges using density functional theory. Here we show that BH 3 , a secondary catalyst, can be produced by symmetrically splitting its stable precursor, B 2 H 6 , on doped metal-free surfaces such as graphene and h-BN as well as on MOF5. In addition, to reduce computational cost, we develop structural descriptor and predictive model equation to effectively screen potential BH 3 binding sites. Symmetrical splitting of B 2 H 6 on different types of materials can address the hydrogen spillover challenge, making efficient storage of hydrogen possible.

08 HYDROGEN↗
DOE OSTI2021

An integrated approach to understanding RF vacuum arcs

Although used in the design and costing of large projects such as linear colliders and fusion tokamaks, the theory of vacuum arcs and gradient limits is not well understood. Almost 120 years after the isolation of vacuum arcs, the exact mechanisms of the arcs and the damage they produce are still being debated. We describe our simple and general model of the vacuum arc that can incorporate all active mechanisms and aims to explain all relevant data. Our four stage model, is based on experiments done at 805 MHz with a variety of cavity geometries, magnetic fields, and experimental techniques as well as data from Atom Probe Tomography and failure analysis of microelectronics. The model considers the trigger, plasma formation, plasma evolution and surface damage phases of the RF arc. This paper also examines how known mechanisms can explain the observed sharp field dependence, fast breakdown times and observed surface damage. We update the model and discuss new features while also pointing out where new data would be useful in extending the model to a wider range of frequencies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Revealing the mechanism of surfactant-promoted enzymatic hydrolysis of dilute acid pretreated bamboo

Here, to improve the enzymatic digestibility of dilute acid pretreated bamboo residue (DABR), surfactants including PEG 4000 and Tween 80 were added to prevent the non-productive adsorption between residual lignin and enzyme. At the optimal loadings (e.g., 0.2 and 0.3 g surfactant/g lignin), the enzymatic digestibility of DABR improved from 29.4% to 64.6% and 61.6% for PEG 4000 and Tween 80, respectively. Furthermore, the promoting mechanism of these surfactants on enzymatic hydrolysis was investigated by real-time surface plasmon resonance (SPR) and fluorescence spectroscopy. Results from SPR analysis showed that Tween 80 outperformed PEG 4000 in terms of dissociating the irreversible cellulase adsorption onto lignin. Fluorescence quenching mechanism revealed that PEG 4000 and Tween 80 intervened the interaction between lignin and cellulase by hydrogen bonds/Van der Waals and hydrophobic action, respectively. This work provided an in-depth understanding of the mechanisms of PEG 4000 and Tween 80 on enhancing the enzymatic hydrolysis efficiency.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Impacts of the Additive Manufacturing Process on the Roughness of Engine Scale Vanes and Cooling Channels

Abstract By leveraging the additive manufacturing (AM) platform, development time and costs for turbine component testing can be reduced relative to traditional investment casting. Surface roughness is a key characteristic of the additive manufacturing process that can impact flow, heat transfer, and mechanical integrity of printed components. There are multiple design and build considerations that result in variability in surface roughness, especially when additively fabricating complicated three-dimensional vanes and internal cooling passages. This study characterizes the surface roughness of internal cooling passages, vanes, and flat external surface samples made using additive manufacturing, specifically the direct metal laser sintering process. The samples were manufactured with various wall thicknesses, layer thicknesses, build locations, build directions, and on different AM machines. A combination of computed tomography scanning and optical profilometry was used to evaluate surface roughness levels. The data indicate that the dominant factors in roughness for a given layer thickness are a function of wall thickness, build location, and build direction.

Engineering↗
DOE OSTI2021

Ultra-low-density digitally architected carbon with a strutted tube-in-tube structure

Porous materials with engineered stretching-dominated lattice designs, which offer attractive mechanical properties with ultra-light weight and large surface area for wide-ranging applications, have recently achieved near-ideal linear scaling between stiffness and density. Here, rather than optimizing the microlattice topology, we explore a different approach to strengthen low-density structural materials by designing tube-in-tube beam structures. We develop a process to transform fully dense, three-dimensional printed polymeric beams into graphitic carbon hollow tube-in-tube sandwich morphologies, where, similar to grass stems, the inner and outer tubes are connected through a network of struts. Compression tests and computational modelling show that this change in beam morphology dramatically slows down the decrease in stiffness with decreasing density. In situ pillar compression experiments further demonstrate large deformation recovery after 30–50% compression and high specific damping merit index. Lastly, our strutted tube-in-tube design opens up the space and realizes highly desirable high modulus–low density and high modulus–high damping material structures.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Thermodynamics and Mechanism of a Photocatalyzed Stereoselective [2 + 2] Cycloaddition on a CdSe Quantum Dot

Colloidal quantum dots (QDs) have shown promise over the last few decades for a range of applications including single photon emission, in vivo imaging and photocatalysis. Recent experiments demonstrated that QDs impart stereoselectivity to triplet excited-state [2+2] cycloaddition reactions of alkenes photocatalyzed by the QD through self-assembly of the reagent molecules on the QD surface, but these experiments did not reveal the precise geometries of surface-bound molecules or their interactions with surface atoms. Here, a theoretical mechanistic approach is used to study such interactions for [2+2] cycloadditions of 4-vinylbenzoic acid derivatives on CdSe QDs. Spin-polarized periodic density functional theory (DFT) and non-periodic DFT calculations are deployed to determine the origin of the selectivity for the syn diastereomer of the resultant tetrasubstituted cyclobutane product via atomistic modelling of the CdSe surface and substrates, and determination of the thermodynamic energies of reactions for each step, the intermolecular interactions between the substrates, and the triplet state reaction paths. The calculations indicate that reaction selectivity arises from preferred binding of pairs through intermolecular interactions of substrate molecules on the QD surface in a syn-precursor structure followed by dimerization after triplet excitation. Further, these mechanisms are generalizable to other metal-enriched QD surfaces that have a similar surface structure to CdSe, such as InSe or CdTe. Design principles for anti diastereomer derivatives are also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Influence of sizing concentration on strength, stiffness, and porosity in textile grade carbon fiber (TCF)-Epoxy composites: Revealing inverse trends

The effect of fiber sizing (i.e., surface treatment) concentration (0 %, 1.36 %, 1.52 %, 1.94 %, and 2.13 %) on the mechanical properties (tensile, flexural, interlaminar shear strength (ILSS), and low velocity impact) of textile grade carbon fiber (TCF)-epoxy composite is examined. An inverse relationship between the strength and stiffness of the composite is observed with increased sizing concentration. The root mean square (RMS) roughness of the fiber surface increased from 17.8 nm (unsized) to 22.7 nm with 2.13 % sizing concentration. It was found that the tensile strength increased by 131 % from 221.4 ± 18.5 MPa (unsized) to 510.8 ± 28.05 MPa (for 1.36 % sizing) and further by 155 %–563.7 ± 14.95 MPa at 2.13 % sizing. On the contrary, the stiffness is initially increased by 126 % from 33.52 ± 7.80 GPa (unsized) to 75.9 ± 3.21 GPa (for 1.36 % sizing) but reduced with further increase in the sizing concentration. A single fiber pull-out test is simulated using the finite element method to validate the reverse trend in strength and stiffness. The varying sizing concentration is simulated by introducing an interface of varying thickness between fibers and matrix. Simulation results confirm that a thicker interface, corresponding to a higher sizing concentration, decreases interfacial shear stress, enhancing material strength while decreasing stiffness. The reverse trend in strength and stiffness with the sizing concentration aligns with experimental observations. In conclusion, the present study emphasizes the importance of sizing concentration for mechanical properties and provide a design criterion for customized high-strength and high-stiffness applications.

Porosity↗