Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface conditioning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Role of Silica Support in Phosphoric Acid Catalyzed Production of p -Xylene from 2,5-Dimethylfuran and Ethylene

p-Xylene is a commodity chemical of industrial importance for terephthalic acid production, for which renewable sourcing from naturally abundant lignocellulosic biomass is highly desired. Previous work demonstrated that phosphoric acid stabilized on siliceous zeolite supports (e.g., P-BEA, P-SPP) exhibits high selectivity toward p-xylene (>97%) from 2,5-dimethylfuran (DMF) and ethylene. However, the effect of the support and the contribution of heterogeneous versus homogeneous phosphoric acid on the observed catalytic behavior in the solvated reaction system have not been addressed. Here, we determine the phosphoric acid catalytic activity for DMF conversion and its selectivity to p-xylene when it is supported on a silica support as well as in the absence of a support. Specifically, phosphoric acid catalysis was studied in three different scenarios: (1) phosphoric acid was added in the liquid reaction mixture in the absence of any solid support, (2) phosphoric acid was added in the liquid reaction mixture along with inert silica support including siliceous zeolite (i.e., allowing for phosphoric acid–support assembly to proceed in the reaction mixture), and (3) phosphoric acid was first impregnated on the siliceous zeolite support and then the preassembled supported phosphoric acid catalyst was added in the liquid reaction mixture. We found that the reaction rate and selectivity to p-xylene are different in the above scenarios reflecting the effect of the solid support on the catalytic performance of phosphoric acid. In scenario 1, a low concentration of phosphoric acid (1.7 mM) in the absence of any solid support exhibited high selectivity to p-xylene (80% selectivity to p-xylene at 60% conversion of DMF), which decreased with increasing acid concentration. The selectivity to p-xylene and activity of phosphoric acid significantly increased by adding a silica support into the reaction system (scenario 2). Furthermore, this improvement was attributed to phosphoric acid partial association with the surface of the silica support under the reaction conditions (in situ catalyst assembly). Phosphoric acid predeposited on siliceous zeolite supports (e.g., P-BEA, P-SPP) synthesized via impregnation prior to the reaction (scenario 3) catalyzed the reaction heterogeneously without noticeable leaching and exhibited the highest activity and selectivity to p-xylene, suggesting an important role of the silica support and the need to ensure that phosphoric acid acts as a heterogeneous catalyst in order to accomplish selective conversion of DMF to p-xylene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Mechanistic Study of the Li–Air Battery with a Co 3 O 4 Cathode and Dimethyl Sulfoxide Electrolyte

The lithium–air battery, a powerful competitor to replace the traditional lithium-ion battery, has attracted increasing attention due to its extremely high theoretical energy density. However, its development is limited by the cathode and electrolyte properties, which should include high stability, conductivity, and electrocatalytic properties in oxygen-rich environments. Here, we employ a systematic first-principles study of Li–O 2 discharge and charge reactions on the Co 3 O 4 -based cathode with the assistance of dimethyl sulfoxide (DMSO) electrolyte. The structure, stability, and electronic properties of different surface reconstructions of the Co 3 O 4 (100) facet are investigated. In addition, the mechanisms and thermodynamic overpotentials of multi-step reactions between Li + /e – and O 2 are provided, where lithium suboxide products (Li 2 O 2 or Li 3 O 2 ) are formed on the different Co 3 O 4 (100) terminations. The solvation shell of Li + components in explicit DMSO solvent is investigated through ab initio molecular dynamics simulations. In general, we find that the Co 3 O 4 (100)-O (oxidized) surface is the most stable one under standard conditions, and the stable Li + solvation structure is found in a tetrahedral Li(DMSO) 4 + shell in the DMSO-based electrolyte. Moreover, in the system of the Co 3 O 4 (100)-O cathode and DMSO electrolyte, the solution model pathway is energetically favorable for the Li–O 2 discharge reaction. It provides a low constant overpotential of 0.17 V during a long-term discharging process, thus causing the final toroid Li 2 O 2 formation on the cathode. During the charging process, an overpotential of 0.36 V is required to rapidly decompose Li 2 O 2 .

25 ENERGY STORAGE↗
DOE OSTI2023

Subsurface Characteristics of Metal-Halide Perovskites Polished by an Argon Ion Beam

Focused ion beam (FIB) techniques have been frequently used to section metal-halide perovskites for microstructural investigations. However, the ion beams directly irradiating the sample surface may alter its properties far different from those of pristine, potentially leading to modified deterioration mechanisms under aging stressors. Here, we combine complementary approaches to measure the subsurface characteristics of polished perovskites and identify the chemical species responsible for the measured properties. Analysis of the experimental results in conjunction with Monte Carlo simulations indicates that atomic displacements and local heating occur in the first ≈15 nm of the subsurface of methylammonium lead iodide (MAPbI 3 ) by glancing-angle Ar + beam irradiation (4 kV at 3°). The lead-rich, iodine-deficient surface promotes rapid phase segregation under thermal aging conditions. On the other hand, despite the subsurface modification, our experiments confirm that the rest of the MAPbI 3 bulk retains the material integrity. Our observation supports that polished perovskites could serve in studying the properties of bulk or buried junctions far away from the altered subsurface with care.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

On-line Inductively Coupled Plasma Mass Spectrometry Reveals Material Degradation Dynamics of Au and Cu Catalysts during Electrochemical CO 2 Reduction

A significant challenge in commercializing electrochemical CO 2 reduction (CO 2 R) is achieving catalyst durability. Here, in this study, online inductively coupled mass spectrometry (ICP–MS) was used to investigate catalyst degradation via nanoparticle detachment and/or dissolution into metal ions under CO 2 R operating conditions in 0.1 M KHCO 3 . We developed an experimental framework with ex situ characterization to validate the online ICP–MS method for in situ evaluation of degradation from metal foils. By varying the applied potential and microenvironment (CO 2 vs N 2 -saturated electrolyte), we gained insights into the degradation of Au and Cu foils under CO 2 R and hydrogen evolution reaction (HER) conditions. While both Au and Cu foils were observed to be stable to dissolution in these regimes, degradation via nanoparticle detachment from the foil surface at the femtogram scale was observed as a function of reaction conditions, providing new insights into material degradation mechanisms. When applying potential steps at −0.1 and −1.0 V vs the reversible hydrogen electrode (RHE), Au was found to degrade via nanoparticle detachment under CO 2 R operating conditions more than under HER conditions, while Cu was found to degrade via nanoparticle detachment in similar amounts during both reactions. Au lost ∼1.8× more mass and ∼7.5× more nanoparticles than Cu under CO 2 R operating conditions. This study demonstrates the use of online ICP–MS to gain insight into the degradation of Au and Cu, the importance of studying unconventional degradation mechanisms such as nanoparticle detachment, and that online ICP–MS can be further utilized to gain fundamental understanding of catalyst durability for a variety of reaction systems.

Yan, Katherine [Stanford Univ., CA (United States)↗
DOE OSTI2026

Surface-Functionalized, Two-Dimensional Polymer Electrochromic Layers as Ultrafast, Multi-State Infrared Optical Gates

Electrochromic devices have widespread application potential, but the currently available switching speeds limit broad real-world implementation of this technology. Here, we report surface-engineered two-dimensional polymers with ionophilic pores that offer unprecedented switching speeds in solid-state, two-terminal, electrochromic devices. In particular, we demonstrate that a crystalline donor–acceptor 2DP functionalized with ethylene glycol oligomers exhibits multistate infrared absorption that is 4× faster (t c = 320 ms) with 3× coloration efficiency (491 cm 2 C –1 ) compared to an alkyl functionalized 2DP constructed from the same chromophores. The functionalized nanoporous surfaces enable rapid switching in these materials under either oxidative or reductive conditions, allowing us to access a range of robust, stable optical responses in a single electrochromic layer. These attributes led us to leverage surface-functionalized 2DPs as multistate infrared logic gates. Collectively, this work demonstrates that surface engineering of nanoporous crystalline lattices is a promising approach to co-optimize the electronic and ionic conductivities required to achieve rapidly switchable electrochromic layers. Beyond speed and efficiency, the demonstration of multistate infrared characteristics shows that electrochromic frameworks are useful in integrated optoelectronic circuits. This positions surface-engineered 2DPs as improved electrochromic coatings and a new material platform for photonic information processing and adaptive devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Trends in Downwelling Longwave Radiance Over the Southern Great Plains

Downwelling longwave radiation is an important part of the surface energy budget. Spectral trends in the downwelling longwave radiance (DLR) provide insight into the radiative drivers of climate change. In this research, we process and analyze a 23-year DLR record measured by the Atmospheric Emitted Radiance Interferometer (AERI) at the U.S. Department of Energy Atmospheric Radiation Program Southern Great Plains (SGP) site. Two AERIs were deployed at SGP with an overlapping observation period of about 10 years, which allows us to examine the consistency and accuracy of the measurements and to account for discrepancies between them due to errors associated with the instruments themselves. We then analyzed the all-sky radiance trends in DLR, which are associated with the surface warming trend at SGP during this same period and also the complex changes in meteorological conditions. For instance, the observed radiance in the CO2 absorption band follows closely the near-surface air temperature variations. The significant positive radiance trends in weak absorption channels, such as in the wings of the CO 2 band and in the weak absorption channels in the H 2 O vibration-rotational band, show earlier detectability of climate change. The magnitude of the radiance trend uncertainty in the DLR record mainly results from internal climate variability rather than from measurement error, which highlights the importance of continuing the DLR spectral measurements to unambiguously detect and attribute climate change.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Representing Soil Microbial Dynamics and Organo‐Mineral Interactions in the E3SM Land Model (ELM‐ReSOM)

Explicit representation of soil microbial processes and interactions with biotic and abiotic processes in Earth System Models (ESMs) remains limited, despite their importance in biogeochemical cycles. To address this gap, which hinders prediction of global biogeochemial cycling and responses to atmospheric conditions, we integrated a microbe- and mineral-surface-explicit model, the Reaction-network-based model of soil organic matter and Microbes (ReSOM), into the Energy Exascale ESM (E3SM) land model (ELM). Here, we describe ELM-ReSOM and show a case study at a conifer forest in California. ELM-ReSOM accurately simulated surface CO 2 fluxes and SOM stocks, demonstrating improved representations of microbial and mineral interactions compared to the default ELM. We examined ELM-ReSOM sensitivity to microbial traits, enzyme properties, and organo-mineral interactions. Microbial traits such as the maximum mortality rate, transporter-density scaling factor, and maximum monomer assimilation rate were strong controllers of heterotrophic respiration, while these microbial traits and enzyme-related properties collectively influenced SOM stocks. Mineral surfaces primarily affected SOM stocks by adsorbing enzymes, thereby limiting depolymerization. Synergies among processes led to stronger impacts of parameters when evaluated together versus separately (i.e., most parameters had greater indirect than direct effects). For example, due to interactions of microbial necromass with mineral surface adsorption, the indirect effect of the maximum microbial mortality rate was 33% larger than its direct effect on SOM stock. Thus, microbial and enzyme dynamics and their interactions with mineral surfaces play critical roles in SOM cycling. Tackling the challenges of microbe-explicit models will advance understanding and modeling of SOM dynamics.

Tao, Jing [Lawrence Berkeley National Laboratory (↗
DOE OSTI2022

Surface restructuring of a perovskite-type air electrode for reversible protonic ceramic electrochemical cells

Reversible protonic ceramic electrochemical cells (R-PCECs) are ideally suited for efficient energy storage and conversion; however, one of the limiting factors to high performance is the poor stability and insufficient electrocatalytic activity for oxygen reduction and evolution of the air electrode exposed to the high concentration of steam. Here we report our findings in enhancing the electrochemical activity and durability of a perovskite-type air electrode, Ba 0.9 Co 0.7 Fe 0.2 Nb 0.1 O 3-δ (BCFN), via a water-promoted surface restructuring process. Under properly-controlled operating conditions, the BCFN electrode is naturally restructured to an Nb-rich BCFN electrode covered with Nb-deficient BCFN nanoparticles. When used as the air electrode for a fuel-electrode-supported R-PCEC, good performances are demonstrated at 650 °C, achieving a peak power density of 1.70 W cm –2 in the fuel cell mode and a current density of 2.8 A cm –2 at 1.3 V in the electrolysis mode while maintaining reasonable Faradaic efficiencies and promising durability.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2022

Coupling, lifetimes, and “strong coupling” maps for single molecules at plasmonic interfaces

The interaction between excited states of a molecule and excited states of a metal nanostructure (e.g., plasmons) leads to hybrid states with modified optical properties. When plasmon resonance is swept through molecular transition frequency, an avoided crossing may be observed, which is often regarded as a signature of strong coupling between plasmons and molecules. Such strong coupling is expected to be realized when 2|$\langle$U$\rangle$|/ℏΓ > 1, where $\langle$U$\rangle$ and Γ are the molecule–plasmon coupling and the spectral width of the optical transition, respectively. Because both $\langle$U$\rangle$ and Γ strongly increase with decreasing distance between a molecule and a plasmonic structure, it is not obvious that this condition can be satisfied for any molecule–metal surface distance. Here, in this work, we investigate the behavior of $\langle$U$\rangle$ and Γ for several geometries. Surprisingly, we find that if the only contributions to Γ are lifetime broadenings associated with the radiative and nonradiative relaxation of a single molecular vibronic transition, including effects on molecular radiative and nonradiative lifetimes induced by the metal, the criterion 2|$\langle$U$\rangle$|/ℏΓ > 1 is easily satisfied by many configurations irrespective of the metal–molecule distance. This implies that the Rabi splitting can be observed in such structures if other sources of broadening are suppressed. Additionally, when the molecule–metal surface distance is varied keeping all other molecular and metal parameters constant, this behavior is mitigated due to the spectral shift associated with the same molecule–plasmon interaction, making the observation of Rabi splitting more challenging.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The development of thermodynamically consistent and physics-informed equation-of-state model through machine learning

Ab initio molecular dynamics (AIMD) simulations have become an important tool used in the construction of equations of state (EOS) tables for warm dense matter. Due to computational costs, only a limited number of system state conditions can be simulated, and the remaining EOS surface must be interpolated for use in radiation-hydrodynamic simulations of experiments. In this work, we develop a thermodynamically consistent EOS model that utilizes a physics-informed machine learning approach to implicitly learn the underlying Helmholtz free-energy from AIMD generated energies and pressures. The model, referred to as PIML-EOS, was trained and tested on warm dense polystyrene producing a fit within a 1% relative error for both energy and pressure and is shown to satisfy both the Maxwell and Gibbs–Duhem relations. In addition, we provide a path toward obtaining thermodynamic quantities, such as the total entropy and chemical potential (containing both ionic and electronic contributions), which are not available from current AIMD simulations.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Surface and sub-surface porosity effects on the initial free surface expansion in shocked single crystal aluminum

Defects and roughness at a material’s surface can allow for the formation of a material jet when a shockwave reaches a surface. The formation of a jet can lead to significant material damage of the shocked material, as well as the downstream material that the jet impacts. Here, we utilize planar shocks in single crystal aluminum to assess initial jetting formation for surface notches and sub-surface porosity. In the case of surface notches, we find that changing the width of the notch can cause the shock breakout response to transition from a standard jetting mechanism to an atomic atomization at high velocities. This transition occurs due to the mechanisms associated with lateral relaxations within the notch and how this interacts with the shock focusing event that induces jetting. For sub-surface pores, the pore collapse induces a re-shock, localized near the pore, that is stronger than the initial shock, but unsupported. Changing the pore dimensions and location relative to the surface influences the strength of the shock that emanates from its collapse when it reaches the surface, leading to a variety of different breakout conditions including jetting and localized material failure.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Rotational Dynamics and Transition Mechanisms of Surface-Adsorbed Proteins

Assembly of biomolecules at solid-water interfaces requires molecules to traverse complex orientation-dependent energy landscapes through processes that are poorly understood, largely due to the dearth of in-situ single molecule measurements and statistical analyses of the rotational dynamics that define directional selection. Emerging capabilities in high-speed atomic force microscopy and machine learning have allowed us to directly determine the orientational energy landscape and observe and quantify the rotational dynamics for protein nanorods on the surface of muscovite mica under a variety of conditions. Comparisons with kinetic Monte Carlo simulations show that the transition rates between adjacent orientation-specific energetic minima can largely be understood through traditional models of in-plane Brownian rotation across a biased energy landscape, with resulting transition rates that are exponential in the energy-barriers between states. However, transitions between more distant angular states are decoupled from barrier height, with jump-size distributions showing a power-law decay that is characteristic of a non-classical Levy-flight random walk, indicating that large jumps are enabled by alternative modes of motion via activated states. The findings provide new insights into the dynamics of biomolecules at solid-liquid interfaces that lead to self-assembly, epitaxial matching and other orientationally anisotropic outcomes and define a general procedure for exploring such dynamics with implications for hybrid biomolecular-inorganic materials design.

Orientational energy landscapes, Rotational dynami↗
DOE OSTI2022

Twenty-first century hydroclimate: A continually changing baseline, with more frequent extremes

Variability in hydroclimate impacts natural and human systems worldwide. In particular, both decadal variability and extreme precipitation events have substantial effects and are anticipated to be strongly influenced by climate change. From a practical perspective, these impacts will be felt relative to the continuously evolving background climate. Removing the underlying forced trend is therefore necessary to assess the relative impacts, but to date, the small size of most climate model ensembles has made it difficult to do this. Here we use an archive of large ensembles run under a high-emissions scenario to determine how decadal “megadrought” and “megapluvial” events—and shorter-term precipitation extremes—will vary relative to that changing baseline. When the trend is retained, mean state changes dominate: In fact, soil moisture changes are so large in some regions that conditions that would be considered a megadrought or pluvial event today are projected to become average. Time-of-emergence calculations suggest that in some regions including Europe and western North America, this shift may have already taken place and could be imminent elsewhere: Emergence of drought/pluvial conditions occurs over 61% of the global land surface (excluding Antarctica) by 2080. Relative to the changing baseline, megadrought/megapluvial risk either will not change or is slightly reduced. However, the increased frequency and intensity of both extreme wet and dry precipitation events will likely present adaptation challenges beyond anything currently experienced. In many regions, resilience against future hazards will require adapting to an ever-changing “normal,” characterized by unprecedented aridification/wetting punctuated by more severe extremes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Features of ion generation by a picosecond laser in the range of 10 11 –10 13 W cm -2 power densities

Picosecond lasers (ps-lasers) have significant advantages for the generation of low charge state ions compared to nanosecond lasers because the influence of heat conductivity on a solid target is almost negligible in the case of ps-laser ablation for laser pulse durations less than 10 ps. However, there is no comprehensive data on ion yields for different elements and target irradiation conditions for laser power densities at the target surface around and below 10 13 W cm –2 , which is of interest to our study of such plasmas as a source of low charge state ions for various applications, particularly for external injection of those ions into an Electron Beam Ion Source (EBIS). We investigated ion generation from Al, Ti, Cu, Nb and Ta target elements by a ps-laser with power densities in the range of 10 11 –10 13 W cm –2 at the target surface. A ps-laser with 1.27 mJ maximum energy within an 8 ps pulse and repetition rate up to 400 Hz has been used to generate a laser-ablated plasma. Dependencies of ion current versus time, total charge of registered ions as well as ion kinetic energy distributions are characterized using a Faraday cup. Significant difference in ion current dynamics between first, second and following shots onto the same target spot was found for all five target elements. The total charge of ions registered by the Faraday cup increases linearly with increasing laser pulse energy and is almost independent of the target element and number of shots onto the same target spot for all five target elements studied. The results obtained give us a basis for specification and design of the source of low charge state ions for external injection into EBIS.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Data for Regier et al. (2025), "Short-term experimental flooding impacts soil biogeochemistry but not aboveground vegetation in a coastal forest"

Rising sea levels and intensifying storms increase flooding pressure on coastal forests, but the mechanisms that drive coastal forest mortality remain unclear. This study used an ecosystem-scale manipulation (TEMPEST, Terrestrial Ecosystem Manipulation to Probe the Effects of Storm Treatments) to simulate hurricane-level flooding of a coastal forest and explore the individual and interactive impacts of inundation and salinity. This dataset comprises the results reported by Regier et al. (2025) in their paper "Short-term experimental flooding impacts soil biogeochemistry but not aboveground vegetation in a coastal forest." It consists of measurements of:- Belowground conductance- Soil dissolved oxygen and redox- Soil and tree greenhouse gas fluxes- Leaf photosynthesis, stomatal conductance, and intercellular carbon dioxide- Sap flux- Soil volumetric water content and electrical conductivityAll files are plain-text CSV (comma separated value) and no special software is required to read them.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Milestone 2.8: Preliminary Radiolytic Gas Generation Measurements from Helium-Backfilled Samples

The Department of Energy (DOE) is currently managing nearly 13 metric tons of aluminum-clad spent nuclear fuel (ASNF) with the intention of extended (> 50 years) dry storage in helium-backfilled canisters. Due to in-reactor and cooling pond conditions, oxyhydroxide corrosion layers have formed on the surface of the ASNF elements. These corrosion layers are susceptible to radiolysis and the formation of molecular hydrogen gas (H 2 ) due to the fuel’s inherent radiation field. Consequently, a rigorous evaluation of the effect of helium gas on radiolytic H 2 production is necessary to support the Technical Considerations and Challenges for Extended (> 50 yrs) Dry Storage of ASNF program, especially as previous Task 2 - Oxyhydroxide Layer Radiolytic Gas Generation Resolution work demonstrated a significant effect of gas composition on the radiolytic yield (G-value) of H 2 . Here we report preliminary G-values for the radiolytic formation of H 2 from the gamma irradiation of pre-corroded aluminum alloy 1100 coupons flame sealed in helium environments. Irradiations yielded G(H 2 ) values of (5.1 ± 0.5) x 10 –4 and (9.4 ± 0.9) x 10 –4 µmol J –1 for pristine coupons, and (10.1 ± 0.4) x 10 –4 and (15.1 ± 1.2) x 10 –4 µmol J –1 for pre-corroded coupons for 0% and 50% relative humidity, respectively. These helium environment G(H 2 ) values are between 28% and 58% higher than previously reported values for argon environments. This enhancement is attributed to the significant difference in first ionization energy between helium (24.59 eV) and argon (15.76) facilitating additional processes, e.g., Penning ionization. These new preliminary helium environment G(H 2 ) values will be employed by Task 3 - Sealed and Vented System Episodic Breathing and Gas Generation Prediction to model the effect of radiolytic H 2 accumulation in helium environments to evaluate the practicality of the extended storage standard canister design.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Resolution of Tolerance Variations

The connector/adapter assembly (CAA) is one component of a higher-level assembly. A simplified representation of the CAA is illustrated in Figure 1. The location of each CAA is required to meet a specific positional requirement. Several CAAs have been measured and found to be out of tolerance. The connector and the adapter are welded to each other such that the cylindrical axes of the two components are coaxial. The positional tolerance condition requires that all points on the outer surface of the CAA must be within a defined maximum diameter, as illustrated in Figure 1. Two different methods have been developed to measure the CAA positions from coordinate measuring machine (CMM) data. One method (RevD) extrapolates the data from two circles approximately midway from the weld region to each end. The second method (RevF) measures points that are much closer to the actual ends.

42 ENGINEERING↗