Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid state physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Characterization of basic physical properties of Sb 2 Se 3 and its relevance for photovoltaics

Antimony selenide (Sb 2 Se 3 ) is a promising absorber material for thin film photovoltaics because of its attractive material, optical and electrical properties. In recent years, the power conversion efficiency (PCE) of Sb 2 Se 3 thin film solar cells has gradually enhanced to 5.6%. In this article, we systematically studied the basic physical properties of Sb 2 Se 3 such as dielectric constant, anisotropic mobility, carrier lifetime, diffusion length, defect depth, defect density and optical band tail states. Here, we believe such a comprehensive characterization of the basic physical properties of Sb 2 Se 3 lays a solid foundation for further optimization of solar device performance.

14 SOLAR ENERGY↗

Structure-Activity Relationships of Hydrothermally Aged Titania-Supported Vanadium-Tungsten Oxide Catalysts for SCR of NOx Emissions with NH3

Supported V2O5-WO3/TiO2 materials employed as selective catalytic reduction (SCR) catalysts for NOx emission control from power plants. Fresh SCR catalysts usually receive exposure to harsh treatments in industry to accelerate catalyst activation (calcination in air at 650oC) and catalyst aging (hydrothermal aging at 650oC) in a way that represents various points in the catalyst/product lifetime. The present study investigates the catalyst structural and chemical changes occurring during such harsh treatments. Three series of supported V2O5-WO3/TiO2 catalysts were prepared by incipient-wetness impregnation of aqueous ammonium metavanadate and metatungstate precursors. The catalysts were subsequently dried and calcined at 550oC in O2, 650oC in O2, and hydrothermal conditions (10% O2, 8% H2O, 7% CO2 and 75% N2) at 650oC. The resulting catalysts were physically characterized by numerous techniques (in situ Raman, in situ IR, in situ High Field-High Spinning solid-state 51V MAS NMR, in situ EPR, XRD, BET surface area and ICP) and chemically probed with adsorbed ammonia, SCR-TPSR, and the SCR reaction. The surface WOx sites on the TiO2 support behave as a textural promoter that stabilizes the TiO2 (anatase) phase from sintering and transforming to the undesirable crystalline TiO2 (rutile) phase that can lead to formation of a Ti1-xVxO2 (rutile) solid solution with reduced V4+ cations (~7-15%). The surface VOx sites are mostly oligomerized as surface V+5Ox sites (~50-85% oligomers) and the extent of oligomerization tends to increase with surface WOx coverage and calcination temperature. A major difference between the calcined and hydrothermally treated catalysts was the low concentration of surface NH3* species on Lewis acid sites for the hydrothermally treated catalysts, yet the SCR activity was almost comparable for both catalysts. This finding suggests that surface NH4+*, primarily associated with the surface VOx sites, are able to efficiently perform the SCR reaction. Given that multiple catalyst parameters were simultaneously varying during these treatments, it was difficult to correlate the SCR activity with any single catalyst parameter. A correlation, however, was found between the SCR TOF/activity and the sum of the surface NH3* and NH4+* species, which is dominated by the surface NH4+* species.

SCR, NO, NH3, catalyst, V2O5, WO3, TiO2, promotion↗

Demonstration of high efficiency elastocaloric cooling with large Delta T using NiTi wires

Vapor compression (VC) is by far the most dominant technology for meeting all cooling and refrigeration needs around the world. It is a mature technology with the efficiency of modern compressors approaching the theoretical limit, but its environmental footprint remains a global problem. VC refrigerants such as hydrochloroflurocarbons (HCFCs) and hydrofluorocarbons (HFCs) are a significant source of green house gas emissions, and their global warming potential (GWP) is as high as 1000 times that of CO2 [Buildings Energy Data Book (Building Technologies Program, Department of Energy, 2009)]. There is an urgent need to develop an alternative high-efficiency cooling technology that is affordable and environmentally friendly [A. D. Little, Report For Office of Building Technology State and Community Programs, Department of Energy, 2001]. Here, we demonstrate that elastocaloric cooling (EC), a type of solid-state cooling mechanism based on the latent heat of reversible martensitic transformation, can have the coefficient of performance as high as 1 1, with a directly measured Delta T of 17 degrees C. The solid-state refrigerant of EC completely eliminates the use of any GWP refrigerants including HCFCs/HFCs. (C) 2012 American Institute. of Physics. [http://dx.doiorg/10.1063/1.4746257]

Cui, J↗

Electronic heat current rectification in hybrid superconducting devices

In this work, we review and expand recent theoretical proposals for the realization of electronic thermal diodes based on tunnel-junctions of normal metal and superconducting thin films. Starting from the basic rectifying properties of a single hybrid tunnel junction, we will show how the rectification efficiency can be largely increased by combining multiple junctions in an asymmetric chain of tunnel-coupled islands. We propose three different designs, analyzing their performance and their potential advantages. Besides being relevant from a fundamental physics point of view, this kind of devices might find important technological application as fundamental building blocks in solid-state thermal nanocircuits and in general-purpose cryogenic electronic applications requiring energy management.

36 MATERIALS SCIENCE↗

A New Model for Water Vapor/Ice Abundance in a Protoplanetary Nebula

Water is a unique substance in the protoplanetary nebula since both solid and gaseous phases coexist in large quantities. Quantitative estimates of their relative abundances are important parameters regarding the physical state of the nebula and planet formation processes. This new model is based on computing the chemical evolution of water molecules until its partial pressure is sufficient to pierce the vapor pressure curve for water. The point at which this occurs relative to its steady state values determines final gas/ice ratios. The wide range of temperatures and densities in typical protoplanetary disks result in a range of gadice ratios. It is found that although ice dominates the mid and far nebula, water vapor is predominant in the centerplane region of the near nebula and above the disk photosphere. An interesting near nebula effect is the appearance of a cloud of water ice at the temperature inversion elevation surrounded by vapor above and below. This work is partially supported by the NASA Astrobiology Institute.

Davis, Sanford S.↗

The Transverse Structure of the Deuteron with Drell-Yan

We propose to measure neutron and deuteron transversity TMDs. The quark transversity distributions of the nucleon are decoupled from the deuteron gluon transversity in the $Q^2$ evolution due to the chiral-odd property in the transversely-polarized target. The gluon transversity TMD only exists for targets of spin greater or equal to 1 and does not mix with quark distributions at leading twist, thereby providing a particularly clean probe of gluonic degrees of freedom. This experiment would be the first of its kind and would probe the gluonic structure of the deuteron, investigating exotic glue contributions in the nucleus not associated with individual nucleons. This experiment can be performed with the SpinQuest polarized target recently assembled for experiment E1039 and the spectrometer already in place in NM4. This new experimental setup would require very minimal modification to the target system and no modification to the detector package. An additional RF-circuit and target coil are necessary to RF-modulate across the domain of the Larmor frequency to manipulate the solid-state target spin population densities. Dedicated beam-time with this novel target system is required to achieve our physics goals.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

MgO-hybridized TiO{sub 2} interfacial layers assisting efficiency enhancement of solid-state dye-sensitized solar cells

Interfacial modification of a thin TiO{sub 2} compact layer (T-CL) by hybridization with MgO enhanced the quantum conversion efficiency of solid-state dye-sensitized solar cells (ssDSSCs) comprising a multilayer structure of transparent electrode/T-CL/dye-sensitized mesoporous TiO{sub 2}/hole conductor/metal counter electrode. The Mg(CH{sub 3}COO){sub 2} treatment was employed to introduce a MgO-TiO{sub 2} CL (T/M-CL), which enhanced the physical connection and conduction between the CL and mesoporous semiconductor layer as a consecutive interface, owing to the dehydration reaction of Mg(CH{sub 3}COO){sub 2}. The photocurrent density of ssDSSC was increased 33% by the T/M-CL compared with the T-CL, using an equivalent amount of adsorbed dye. The ssDSSC with the T/M-CL yielded the highest efficiency of 4.02% under irradiation at 100 mW cm{sup −2}. The electrical impedance spectroscopy showed that the charge-transfer resistance (R{sub ct}) of the photoelectrode with T/M-CL was reduced by 300 Ω from the reference non-treated T-CL electrode. Characterized by the intrinsically low R{sub ct} of the compact layer, the T/M-CL is capable of improving the photovoltaic performance of solid-state sensitized mesoscopic solar cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis, crystal structures and properties of lanthanide-organic frameworks based benzene carboxylates with two/three-dimensional structure

A series of lanthanide coordination polymers, {l_brace}[Dy{sub 3}(1,3-BDC){sub 4}(NO{sub 3})(phen){sub 3}]{center_dot}2H{sub 2}O{r_brace}{sub n} (1), {l_brace}[Dy{sub 2}(1,3-BDC){sub 3}(H{sub 2}O){sub 2}]{center_dot}H{sub 2}O{r_brace}{sub n} (2), {l_brace}[Ln{sub 4}(1,3-BDC){sub 6}(DMF)(H{sub 2}O){sub 4}]{center_dot}DMF{center_dot}2H{sub 2}O{r_brace}{sub n} (Ln=Tb (3), Ho (4), Er (5), 1,3-H{sub 2}BDC=1,3-benzenedicarboxylate, phen=1,10-phenanthroline, DMF=N,N-dimethylformamide), have been synthesized and characterized. In coordination polymer 1, each Dy{sup 3+} ion is connected to its neighboring Dy{sup 3+} ion through bridging carboxyl oxygen atoms of the 1,3-BDC{sup 2-} ligands to form a new three-dimensional open-framework structure which the Schlaefli symbol of {l_brace}6{sup 4}{center_dot}8{sup 2}{r_brace}{sub 2}{l_brace}6{sup 6}{r_brace}. In coordination polymer 2, center metal dysprosium ions are interlaced and connected through bridging carboxyl oxygen atoms to form an infinite helix chain. Two helix chains are linked through the 1,3-BDC{sup 2-} ligand to give rise to the two-dimensional layered structure. Coordination polymers 3-5 are isomorphous, which displays a (3,4)-connected net with the point symbol of {l_brace}4{sup 2}{center_dot}6{sup 3}{center_dot}8{r_brace}{l_brace}4{sup 2}{center_dot}6{r_brace}. The solid-state photoluminescence properties and lifetimes of the Dy (1 and 2) and Tb (3) coordination polymers have been measured at room temperature. Highlights: Black-Right-Pointing-Pointer Five lanthanide coordination polymers based on 1,3-H{sub 2}BDC were obtained. Black-Right-Pointing-Pointer The polymers were structurally characterized by single-crystal X-ray diffraction. Black-Right-Pointing-Pointer Coordination polymers 1-5 display different topological structures. Black-Right-Pointing-Pointer They show characteristic emissions of lanthanide ions in the solid state.

36 MATERIALS SCIENCE↗

A benign synthesis of alane by the composition-controlled mechanochemical reaction of sodium hydride and aluminum chloride

Solid-state mechanochemical synthesis of alane (AlH 3 ) starting from sodium hydride (NaH) and aluminum chloride (AlCl 3 ) has been achieved at room temperature. The transformation pathway of this solid-state reaction was controlled by a stepwise addition of AlCl 3 to the initial reaction mixture that contained sodium hydride in excess of stoichiometric amount. As in the case of previously investigated LiH–AlCl 3 system, complete selectivity was achieved whereby formation of unwanted elemental aluminum was fully suppressed, and AlH 3 was obtained in quantitative yield. Reaction progress during each step was investigated by means of solid-state NMR and powder X-ray diffraction, which revealed that the overall reaction proceeds through a series of intermediate alanates that may be partially chlorinated. The NaH–AlCl 3 system presents some subtle differences compared to LiH–AlCl 3 system particularly with respect to optimal concentrations needed during one of the reaction stages. Based on the results, we postulate that high local concentrations of NaH may stabilize chlorine-containing derivatives and prevent decomposition into elemental aluminum with hydrogen evolution. As a result, complete conversion with quantitative yield of alane was confirmed by both SSNMR and hydrogen desorption analysis.

36 MATERIALS SCIENCE↗

Characterization of solids in residual wastes from single-shell tanks at the Hanford site, Washington, USA.

Solid phase physical and chemical characterization methods have been used in an ongoing study of residual wastes from several single-shell underground waste tanks at the U.S. Department of Energy's Hanford Site in southeastern Washington State. Because these wastes are highly-radioactive dispersible powders and are chemically-complex assemblages of crystalline and amorphous solids that contain contaminants as discrete phases and/or co-precipitated within oxide phases, their detailed characterization offers an extraordinary technical challenge. X-ray diffraction (XRD) and scanning electron microscopy/energy dispersive x-ray spectroscopy (SEM/EDS) are the two principal methods used, along with a limited series of analyses by synchrotron-based methods, to characterize solid phases and their contaminant associations in these wastes.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A Personal Journey in Nanoscience via Developing and Applying Liquid Phase TEM

Liquid phase TEM has attracted widespread attention in recent years as a groundbreaking tool to address various fundamental problems in nanoscience. It has provided the opportunity to reveal many unseen dynamic phenomena of nanoscale materials in solution processes by direct imaging through liquids with high spatial and temporal resolution. After my earlier work on real-time imaging of the nucleation, growth, and dynamic motion of nanoparticles in liquids by developing high-resolution liquid phase transmission electron microscopy (TEM) down to the sub-nanometer level, I established my own research group at Lawrence Berkeley National Lab in 2010. My group focuses on developing and applying liquid phase TEM to investigate complex systems and reactions. We have studied a set of scientific problems centered on understanding how atomic level heterogeneity and fluctuations at solid-liquid interfaces impact nanoscale materials transformations using advanced liquid phase TEM. This article describes my personal journey in nanoscience, highlighting the main discoveries of my research group using liquid phase TEM as a unique tool. Some perspectives on the impacts of liquid phase TEM and the future opportunities in nanoscience and nanotechnology enabled by liquid phase TEM are also included.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spontaneous Charge Separation and Sublimation Processes are Ubiquitous in Nature and in Ionization Processes in Mass Spectrometry

Ionization processes have been discovered by which small and large as well as volatile and nonvolatile compounds are converted to gas-phase ions when associated with a matrix and exposed to sub-atmospheric pressure. Here, we discuss experiments further defining these simple and unexpected processes. Charge separation is found to be a common process for small molecule chemicals, solids and liquids, passed through an inlet tube from a higher to a lower pressure region, with and without heat applied. This charge separation process produces positively- and negatively-charged particles with widely different efficiencies depending on the compound and its physical state. Circumstantial evidence is presented suggesting that in the new ionization process, charged particles carry analyte into the gas phase, and desolvation of these particles produce the bare ions similar to electrospray ionization, except that solid particles appear likely to be involved. This mechanistic proposition is in agreement with previous theoretical work related to ion emission from ice. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Simulation of Simple and Complex Gadolinium Molybdates by the Interatomic Potential Method

Crystals of ferroelectric‒ferroelastic gadolinium molybdate Gd{sub 2}(MoO{sub 4}){sub 3}, calcium molybdate CaMoO{sub 4}, and double sodium‒gadolinium molybdates of stoichiometric (Na{sub 1/2}Gd{sub 1/2}MoO{sub 4}) and cationdeficient (Na{sub 2/7}Gd{sub 4/7}MoO{sub 4}) compositions, which are used to design solid-state lasers, phosphors, and white LEDs, have been simulated by the interatomic potential method. Their structural, mechanical, and thermodynamic properties are calculated using a unified system of interatomic potentials and effective ion charges, which demonstrated transferability and made it possible not only to describe the existing experimental data but also to predict some important physical and thermodynamic properties of molybdate crystals. The influence of the deviation from stoichiometry and partial ordering of cations on sites in nonstoichiometric crystals on the properties and local structure of sodium‒gadolinium molybdates is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Compact Radar Transceiver with Included Calibration

The Digital Beamforming Synthetic Aperture Radar (DBSAR) is an eight-channel phased array radar system that employs solid-state radar transceivers, a microstrip patch antenna, and a reconfigurable waveform generator and processor unit. The original DBSAR transceiver design utilizes connectorized electronic components that tend to be physically large and heavy. To achieve increased functionality in a smaller volume, PCB (printed circuit board) transceivers were designed to replace the large connectorized transceivers. One of the most challenging problems designing the transceivers in a PCB format was achieving proper performance in the calibration path. For a radar loop-back calibration path, a portion of the transmit signal is coupled out of the antenna feed and fed back into the receiver. This is achieved using passive components for stability and repeatability. Some signal also leaks through the receive path. As these two signal paths are correlated via an unpredictable phase, the leakage through the receive path during transmit must be 30 dB below the calibration path. For DBSAR s design, this requirement called for a 100-dB isolation in the receiver path during transmit. A total of 16 solid-state L-band transceivers on a PCB format were designed. The transceivers include frequency conversion stages, T/R switching, and a calibration path capable of measuring the transmit power-receiver gain product during transmit for pulse-by-pulse calibration or matched filtering. In particular, this calibration path achieves 100-dB isolation between the transmitted signal and the low-noise amplifier through the use of a switching network and a section of physical walls achieving attenuation of radiated leakage. The transceivers were designed in microstrip PCBs with lumped elements and individually packaged components for compactness. Each transceiver was designed on a single PCB with a custom enclosure providing interior walls and compartments to isolate transceiver subsystems from radiated interference. The enclosure also acts as a heat sink for the voltage regulators and power amplifiers inside the system. The PCB transceiver design produces transmit pulses of 2 W with an arbitrary duty cycle. Each transceiver is fed by an external 120-MHz signal transmit and two 1,140-MHz local oscillator signals. The received signal is amplified and down-converted to 120 MHz and is fed to the data processor. The transceiver dimensions are approximately 3.5 11.5 0.6 in. (9 29 1.5 cm). The PCB transceiver design reduces the volume and weight of the DBSAR instrument while maintaining the functionality found in the original design. Both volume and weight are critical for airborne and flight remote sensing instrumentation.

McLinden, Matthew↗

Room-temperature fabrication of garnet-type solid-electrolyte: Optimizing particle size for high ionic conductivity

Dense and uniform Li 6.25 Al 0.25 La 3 Zr 2 O 12 (Al-doped LLZO) solid-electrolyte film of ~24 µm thickness is successfully fabricated by room temperature aerosol deposition (AD) method. The process optimization study revealed that careful control of particle size and morphology is one of critical determinants in the development of a compact AD membrane. Notably, our method facilitated an impressive ionic conductivity of approximately 10 –5 S cm –1 , bypassing the necessity for post-annealing processes, a milestone in itself. However, it is hypothesized that the attained conductivity is somewhat restrained by factors such as smaller grain size and potential surface degradation due to moisture exposure during fabrication, indicating avenues for further research. Looking forward, detailed investigations into the film's microstructure and its impact on transport properties will be a focal point, alongside potential enhancements through post-annealing and particle coating strategies. Finally, this research hints at a promising trajectory for the development of high-efficiency solid-state battery technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The hobbyist phenomenon in physical security.

Pro-Ams (professional amateurs) are groups of people who work on a problem as amateurs or unpaid persons in a given field at professional levels of competence. Astronomy is a good example of Pro-Am activity. At Galaxy Zoo, Pro-Ams evaluate data generated by professional observatories and are able to evaluate the millions of galaxies that have been observed but not classified, and report their findings at professional levels for fun. To allow the archiving of millions of galaxies that have been observed but not classified, the website has been engineered so that the public can view and classify galaxies even if they are not professional astronomers. In this endeavor, it has been found that amateurs can easily outperform automated vision systems. Today in the world of physical security, Pro-Ams are playing an ever-increasing role. Traditionally, locksmiths, corporations, and government organizations have been largely responsible for developing standards, uncovering vulnerabilities, and devising best security practices. Increasingly, however, nonprofit sporting organizations and clubs are doing this. They can be found all over the world, from Europe to the US and now South East Asia. Examples include TOOOL (The Open Organization of Lockpickers), the Longhorn Lockpicking Club, Sportsfreunde der Sperrtechnik - Deustcheland e.V., though there are many others. Members of these groups have been getting together weekly to discuss many elements of security, with some groups specializing in specific areas of security. When members are asked why they participate in these hobbyist groups, they usually reply (with gusto) that they do it for fun, and that they view defeating locks and other security devices as an interesting and entertaining puzzle. A lot of what happens at these clubs would not be possible if it weren't for 'Super Abundance', the ability to easily acquire (at little or no cost) the products, security tools, technologies, and intellectual resources traditionally limited to corporations, government organizations, or wealthy individuals. With this new access comes new discoveries. For example, hobbyist sport lockpicking groups discovered - and publicized - a number of new vulnerabilities between 2004 and 2009 that resulted in the majority of high-security lock manufacturers having to make changes and improvements to their products. A decade ago, amateur physical security discoveries were rare, at least those discussed publicly. In the interim, Internet sites such as lockpicking.org, lockpicking101.com and others have provided an online meeting place for people to trade tips, find friends with similar interests, and develop tools. The open, public discussion of software vulnerabilities, in contrast, has been going on for a long time. These two industries, physical security and software, have very different upgrade mechanisms. With software, a patch can typically be deployed quickly to fix a serious vulnerability, whereas a hardware fix for a physical security device or system can take upwards of months to implement in the field, especially if (as is often the case) hardware integrators are involved. Even when responding to publicly announced security vulnerabilities, manufacturers of physical security devices such as locks, intrusion detectors, or access control devices rarely view hobbyists as a positive resource. This is most unfortunate. In the field of software, it is common to speak of Open Source versus Closed Source. An Open Source software company may choose to distribute their software with a particular license, and give it away openly, with full details and all the lines of source code made available. Linux is a very popular example of this. A Close Source company, in contrast, chooses not to reveal its source code and will license its software products in a restrictive manor. Slowly, the idea of Open Source is now coming to the world of physical security. In the case of locks, it provides an alternative to the traditional Closed Source world of locksmiths. Now locks are physical objects, and can therefore be disassembled. As such, they have always been Open Source in a limited sense. Secrecy, in fact, is very difficult to maintain for a lock that is widely distributed. Having direct access to the lock design provides the hobbyist with a very open environment for finding security flaws, even if the lock manufacturer attempts to follow a Close Source model. It is clear that the field of physical security is going the digital route with companies such as Medeco, Mul-T-Lock, and Abloy manufacturing electromechanical locks. Various companies have already begun to add microcontrollers, cryptographic chip sets, solid-state sensors, and a number of other high-tech improvements to their product lineup in an effort to thwart people from defeating their security products.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interaction of methanol with a layered α-Sn(IV) phosphate on its surface: A solid-state NMR study

Here, a layered crystalline phosphate, α-Sn(HPO 4 ) 2 ·H 2 O, treated with CD 3 OD was characterized by the 31 P, 119 Sn, 1 H and 2 H solid-state NMR techniques. The 2 H solid-echo MAS NMR spectra of the product have unexpectedly revealed deuterated hydronium ions on the surface of this material instead of intercalated methanol. According to the 13 C NMR and GC–MS studies, these ions are formed by water molecules following a dehydration of the methanol-d 4 to yield deuterated dimethyl ether.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of hydrocarbon adsorption on the wettability of rare earth oxide ceramics

Vapor condensation is routinely used as an effective means of transferring heat, with dropwise condensation exhibiting a 5 − 7x heat transfer improvement compared to filmwise condensation. However, state-of-the-art techniques to promote dropwise condensation rely on functional hydrophobic coatings, which are often not robust and therefore undesirable for industrial implementation. Natural surface contamination due to hydrocarbon adsorption, particularly on noble metals, has been explored as an alternative approach to realize stable dropwise condensing surfaces. While noble metals are prohibitively expensive, the recent discovery of robust rare earth oxide (REO) hydrophobicity has generated interest for dropwise condensation applications due to material costs approaching 1% of gold; however, the underlying mechanism of REO hydrophobicity remains under debate. In this work, we show through careful experiments and modeling that REO hydrophobicity occurs due to the same hydrocarbon adsorption mechanism seen previously on noble metals. To investigate adsorption dynamics, we studied holmia and ceria REOs, along with control samples of gold and silica, via X-Ray photoelectron spectroscopy (XPS) and dynamic time-resolved contact angle measurements. The contact angle and surface carbon percent started at ≈0 on in-situ argon-plasma-cleaned samples and increased asymptotically over time after exposure to laboratory air, with the rare earth oxides displaying hydrophobic (>90°) advancing contact angle behavior at long times (>4 days). The results indicate that REOs are in fact hydrophilic when clean and become hydrophobic due to hydrocarbon adsorption. Furthermore, this study provides insight into how REOs can be used to promote stable dropwise condensation, which is important for the development of enhanced phase change surfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗