Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Thermal, optical and spectroscopic characterizations of borate laser crystals

The Yb-content Li{sub 6}Ln(BO{sub 3}){sub 3} (Ln: Gd, Y) solid solution has been investigated. Crystal growth has been successful for several compositions. A 22% molar content of ytterbium ions was determined by chemical analysis (ICP). Physical properties relevant to laser operation like mechanical hardness, thermal expansion and thermal conductivity were measured on single crystals. Optical measurements, including refractive index and low temperature spectroscopy, were also performed. Finally, the effect of the Y/Gd ratio is discussed. -- Graphical abstract: Several solid solutions of a rare earth borate were studied. The figure illustrates one of these single crystals obtained by Czochralski and shows thermal behaviour and absorption spectra at low temperature. Display Omitted Research highlights: {yields} We have grown by Czochralski method five Li{sub 6}Ln(BO{sub 3}){sub 3} (Ln=Y, Gd,Yb) single crystals. {yields} Chemical, physical and spectroscopic characteristics are reported. {yields} Data relevant to laser operation are listed.

36 MATERIALS SCIENCE↗

Synthesis and microstructure characterization of Ni-Cr-Co-Ti-V-Al high entropy alloy coating on Ti-6Al-4V substrate by laser surface alloying

Ni-Cr-Co-Ti-V-Al high-entropy alloy coating on Ti-6Al-4V was synthesized by laser surface alloying. The coating is composed of a B2 matrix and (Co, Ni)Ti{sub 2} compounds with few β-Ti phases. Focused ion beam technique was utilized to prepare TEM sample and TEM observations agree well with XRD and SEM results. The formation of HEA phases is due to high temperature and rapid cooling rate during laser surface alloying. The thermodynamic parameters, ΔH{sub mix}, ΔS{sub mix}and δ as well as Δχ, should be used to predict the formation of the BCC solid solution, but they are not the strict criteria. Especially when Δχ reaches a high value (≥ 10%), BCC HEA will be partially decomposed, leading to the formation of (Co, Ni)Ti{sub 2} compound phases. - Highlights: •Preparing HEA coating on Ti-6Al-4V by laser surface alloying is successful. •The synthesized HEA coating mainly consists of BCC HEA and (Co, Ni)Ti{sub 2} compounds. •FIB technology was used to prepare the sample for TEM analysis. • ΔH{sub mix}, ΔS{sub mix}and δ as well as Δχ, should be all used to predict the formation of solid solution.

36 MATERIALS SCIENCE↗

Composition and microstructure of zirconium and hafnium germanates obtained by different chemical routes

The phase composition and morphology of zirconium and hafnium germanates synthesized by ceramic and co-precipitation routes were studied. The products were characterized using high-temperature X-ray diffraction analysis (XRD), Raman spectroscopy, scanning electron microscopy (SEM) and thermal (TG/DTA) analysis. To investigate the phase composition and stoichiometry of compounds the unit cell parameters were refined by full-profile Rietveld XRD analysis. The morphology of products and its evolution during high-temperature treatment was examined by SEM analysis. It was stated that there is the strong dependence of the phase composition and morphology of products on the preparation route. The ceramic route requires a multi-stage high-temperature treatment to obtain zirconium and hafnium germanates of 95% purity or more. Also, there are strong diffusion limitations to obtain hafnium germanate Hf{sub 3}GeO{sub 8} by ceramic route. On the contrary, the co-precipitation route leads to the formation of nanocrystalline single phase germanates of stoichiometric composition at a relatively low temperatures (less than 1000 °C). The results of quantitative XRD analysis showed the hafnium germanates are stoichiometric compounds in contrast to zirconium germanates that form a set of solid solutions. This distinction may be related to the difference in the ion radii of Zr and Hf. - Graphical abstract: The phase composition and morphology of zirconium and hafnium germanates synthesized by ceramic and co-precipitation routes were studied. It was stated that there is the strong dependence of the phase composition and morphology of products on the preparation route. Display Omitted - Highlights: • Zr and Hf germanates were synthesized by ceramic and co-precipitation routes. • The morphology of products depends on the synthesis parameters. • Zirconium germanates forms a set of solid solutions. • Hafnium germanates are stoichiometric compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structural characterization and Mössbauer study of LnV{sub 0.5}Fe{sub 0.5}O{sub 3} perovskites (Ln = Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho and Er)

Graphical abstract: Mössbauer spectra taken at 200 K for the Y(V{sub 0.5}Fe{sub 0.5})O{sub 3} orthoferrivanadate synthesized by arc-melting. Highlights: ► LnFe{sub 0.5}V{sub 0.5}O{sub 3} were synthesized by the first time for most of the rare-earth elements. ► These orthoferrivanadates crystallize metastably with the perovskite structure. ► Iron and vanadium are trivalent stabilized in these solid solutions. ► The Mössbauer quadrupolar splitting is correlated with the tolerance factor. ► Below 100 K, these perovskites undergo a crystallographic phase transformation. -- Abstract: Perovskites LnV{sub 0.5}Fe{sub 0.5}O{sub 3} (Ln = Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho and Er) were synthesized by rapid solidification from arc-melted samples and characterized by the study of their crystal structure and hyperfine properties. These metastable solid solutions crystallized in the Pbnm symmetry, with the iron and vanadium cations randomly distributed in the transition metal octahedral sites. Depending on the lanthanide present at the A site of the perovskite, iron is present with two valences (i.e., Fe{sup 3+} and Fe{sup 2+}). The volume of the unit cell for these perovskites increases linearly with the lanthanide ionic radius, as the perovskite approaches its ideal structure. At room temperature, the quadrupolar splitting of the trivalent paramagnetic Mössbauer component works as an indirect measurement for the Goldshmidt tolerance factor. Close to or below 100 K, these perovskites undergo a crystallographic phase transformation, probably due to orbital ordering of the V{sup 3+} cations, originating two different magnetic iron sites.

36 MATERIALS SCIENCE↗

Substitution features in the isomorphous replacement series for metal-organic compounds (Nb{sub x}Ta{sub 1-x}){sub 4}O{sub 2}(OMe){sub 14}(ReO{sub 4}){sub 2}, x=0.7, 0.5, 0.3-Single-source precursors of complex oxides with organized porosity

Trimetallic oxoalkoxide complexes (Nb{sub 0.7}Ta{sub 0.3}){sub 4}O{sub 2}(OMe){sub 14}(ReO{sub 4}){sub 2} (I), (Nb{sub 0.3}Ta{sub 0.7}){sub 4}O{sub 2}(OMe){sub 14}(ReO{sub 4}){sub 2} (II) and (Nb{sub 0.5}Ta{sub 0.5}){sub 4}O{sub 2}(OMe){sub 14}(ReO{sub 4}){sub 2} (III) were obtained by the interaction of rhenium heptoxide (VII) Re{sub 2}O{sub 7} with niobium and tantalum alkoxides M{sub 2}(OMe){sub 10} (M=Nb, Ta) in toluene. The centrosymmetric molecules (I)-(III) can be considered as a product of condensation of two M{sub 2}(OMe){sub 9}(OReO{sub 3}) molecules with the formation of two oxo-bridges. The specific feature of the structure is the uneven distribution of metal atoms in the crystallographic positions, where one symmetry-independent position, connected via {mu}-O with a perrhenate ReO{sub 4}{sup -} group, is predominantly occupied by niobium atoms, while the other one connected via alkoxide groups has a higher tantalum content. The distribution of Nb and Ta in the structure is truly even only for compound III. The niobium and tantalum content is varied to a different extent for I (less) and for II (more), which is apparently due to small differences in the sizes of these two cations, resulting in preferences for packing of different molecules in the structures. Thermal decomposition of (Nb{sub 1-x}Ta{sub x}){sub 4}O{sub 2}(OMe){sub 14}(ReO{sub 4}){sub 2} (x=0.3, 0.5, 0.7) in air leads to the formation of crystalline species of solid solutions based on tantalum and niobium oxides displaying semi-ordered pores with the size of 100-250 nm. In the dry nitrogen atmosphere, the decomposition leads to the amorphous complex oxides containing rhenium, niobium and tantalum. - Graphical abstract: Thermal decomposition of (Nb{sub 1-x}Ta{sub x}){sub 4}O{sub 2}(OMe){sub 14}(ReO{sub 4}){sub 2} (x=0.3, 0.5, 0.7), single-source complex precursors, in air leads to the formation of crystalline solid solutions based on tantalum and niobium oxides, displaying semi-ordered pores with the size of 100-250 nm. In the dry nitrogen atmosphere, the decomposition leads to the formation of amorphous complex oxides containing rhenium, niobium and tantalum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chromium transport in an acidic waste contaminated subsurface medium: The role of reduction

A series of wet chemical extractions and column experiments, combined with electron microprobe analysis (EMPA) and X-ray photoelectron spectroscopy (XPS) measurements, were conducted to estimate the extent of contaminant Cr(VI) desorption and determine the mechanism(s) of Cr(VI) attenuation in contaminated and naturally aged (decades) Hanford sediments which were exposed to dichromate and acidic waste solutions. Results from wet extractions demonstrated that contaminated sediments contained a large fraction of tightly-bound Cr. Results from column experiments showed that effluent Cr(VI) concentrations were low and only a small percentage of the total Cr inventory was released from the contaminated sediments, demonstrating again low Cr mobility. EMPA inspections showed that Cr contamination was spread throughout sediment matrix and high-concentrated Cr spots were not apparently present. XPS analyses showed that most surface Cr was Cr(III). Reduced Cr(III) was spatially associated with Fe, which occurred mostly as Fe(III). Neoprecipitates were most likely Cr(III) oxyhydroxides or [Cr(III) Fe(III)] solid solutions. Extensive reduction to Cr(III) limited dramatically mass flux from this source. The following multiple-step mechanism was most likely operational in the contaminated sediments: acid promoted dissolution of Fe(II)-bearing soil minerals and/or their surface coatings, release of Fe(II) in the aqueous phase, abiotic homogeneous and/or heterogeneous Cr(VI) reduction by aqueous, sorbed and/or structural Fe(II), formation of insoluble Cr(III) phases or [Cr(III) Fe(III)] solid solutions.

54 ENVIRONMENTAL SCIENCES↗

Compatibility of hydrogarnet, Ca{sub 3}Al{sub 2}(SiO{sub 4}){sub x}(OH){sub 4(3−x)}, with sulfate and carbonate-bearing cement phases: 5–85 °C

The stable existence of hydrogarnet in Portland cement compositions cured at temperatures below 55 °C has long been predicted from application of equilibrium thermodynamics. However hydrogarnet is not often reported in hydrated commercial Portland cements. The substitutions (SO{sub 4}–CO{sub 3}–OH) in AFm have previously been shown to stabilise AFm to higher temperatures and raise the temperature at which AFm converts to Si-free hydrogarnet, C{sub 3}AH{sub 6}. But unanswered question remains about the compatibility of AFm and AFm solid solutions with Si-substituted hydrogarnet, Ca{sub 3}Al{sub 2}(SiO{sub 4}){sub x}(OH){sub 4(3} {sub −} {sub x)}. Phase relations of C{sub 3}AH{sub 6} and Ca{sub 3}Al{sub 2}(SiO{sub 4}){sub x}(OH){sub 4(3} {sub −} {sub x)} at sulfate and carbonate activities conditioned respectively by (gypsum and SO{sub 4}-AFt) and (calcite and CO{sub 3}-AFt) have been determined experimentally in the range 5–85 °C. The results confirm the instability of Si-free hydrogarnet with carbonate and sulfate-bearing cement phases, but do indicate that a range of silica-substituted hydrogarnet solid solutions are stable under conditions likely to be encountered in blended cement systems.

36 MATERIALS SCIENCE↗

Thermoelectric transport properties of polycrystalline SnSe alloyed with PbSe

Single-crystal SnSe has been found to exhibit exceptional thermoelectric performance, but the efficiency of polycrystalline samples is still far from satisfactory. In this paper, with an intention to effectively suppress heat conduction and minimally affect hole transport, we alloyed p-type polycrystalline SnSe with PbSe. Single-phase Sn 1-x Pb x Se solid solutions were formed up to x ≈ 0.12. The lattice thermal conductivity was reduced from 1.4 to 0.85 W m -1 K -1 by 12 at. % PbSe alloying due to strain and mass fluctuations. Interestingly, the Seebeck coefficient and carrier concentration were nearly unchanged by Pb substitution, indicating a constant effective mass and an undisrupted valence band maximum. A peak figure of merit (ZT) of 0.85 at 800 K was obtained in the x = 0 sample, and relatively high performance was also achieved in solid solutions. Finally, a concise model was developed involving multiple carrier scattering mechanisms, capturing the dependence of the mobility on composition and temperature.

36 MATERIALS SCIENCE↗

Mixed sodium nickel-manganese sulfates: Crystal structure relationships between hydrates and anhydrous salts

The present contribution provides new structural and spectroscopic data on the formation of solid solutions between hydrated and dehydrated sulfate salts of sodium-nickel and sodium-manganese in a whole concentration range: Na{sub 2}Ni{sub 1−x}Mn{sub x}(SO{sub 4}){sub 2}·yH{sub 2}O, 0≤ x≤1.0. Using powder XRD, electron paramagnetic resonance spectroscopy (EPR), IR and Raman spectroscopy it has been found that double sodium-nickel and sodium-manganese salts form solid solutions Na{sub 2}Ni{sub 1−x}Mn{sub x}(SO{sub 4}){sub 2}·4H{sub 2}O with a blödite-type of structure within a broad concentration range of 0≤x≤0.49, while the manganese rich compositions Na{sub 2}Ni{sub 1−x}Mn{sub x}(SO{sub 4}){sub 2}·2H{sub 2}O (0.97≤x≤1.0) crystallize in the kröhnkite-type of structure. The Ni-based blödites Na{sub 2}Ni{sub 1−x}Mn{sub x}(SO{sub 4}){sub 2}·4H{sub 2}O dehydrate between 140 and 260 °C into anhydrous salts Na{sub 2}Ni{sub 1−x}Mn{sub x}(SO{sub 4}){sub 2}, 0≤ x≤0.44, with a structure where Ni{sub 1−x}Mn{sub x}O{sub 6} octahedra are bridged into pairs by edge- and corner sharing SO{sub 4}{sup 2−} groups. Both TEM and EPR methods show that the Ni{sup 2+} and Mn{sup 2+} ions are homogenously distributed over three crystallographic positions of the large monoclinic cell. The dehydration of the kröhnkite phase Na{sub 2}Ni{sub 1−x}Mn{sub x}(SO{sub 4}){sub 2}·2H{sub 2}O yields the alluaudite phase Na{sub 2+δ}Mn{sub 2-δ/2}(SO{sub 4}){sub 3}, where the Na-to-Mn ratio decreases and all Ni{sup 2+} dopants are released from the structure. The process of the dehydration is discussed in terms of structural aspects taking into account the distortion degree of the Ni,MnO{sub 6} and SO{sub 4} polyhedra. - Graphical abstract: Thermal dehydration of the blödite phase Na{sub 2}Ni{sub 1−x}Mn{sub x}(SO{sub 4}){sub 2}·4H{sub 2}O (0≤ x≤0.49) yields nickel-manganese sulfates Na{sub 2}Ni{sub 1−x}Mn{sub x}(SO{sub 4}){sub 2} (0≤ x≤0.44) with a large monoclinic cell, while the alluaudite phase Na{sub 2+δ}Mn{sub 2-δ/2}(SO{sub 4}){sub 3} is obtained from the kröhnkite phase Na{sub 2}Ni{sub 1−x}Mn{sub x}(SO{sub 4}){sub 2}·2H{sub 2}O (0.97≤x≤1.0). - Highlights: • Blödite phases accommodate Mn{sup 2+} ions. • Blödite structure is transformed to a super-cell structure. • The kröhnkite phase accommodates only limited amounts of Ni{sup 2+} ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and Electrical Properties of a Fluorite-Like Nd{sub 5}Mo{sub 3}O{sub 16} Compound with Partial Substitution of Molybdenum by Tungsten, Niobium, or Vanadium

The phase formation of Nd{sub 5}Mo{sub 3–x}W{sub x}O{sub 16.5}, Nd{sub 5}Mo{sub 3–x}Nb{sub x}O{sub 16.5–х/2}, and Nd{sub 5}Mo{sub 3–x}V{sub x}O{sub 16.5–х/2} solid solutions based on a fluorite-like Nd{sub 5}Mo{sub 3}O{sub 16.5} compound (mixed conductor with interstitial oxygen conductivity) has been studied. The electrical conductivity of doped compounds obeys the Arrhenius law and, at a low impurity content, is as high as 0.03–0.08 S/cm at 800°C. Substitution of Mo{sup 6+} cations by V{sup 5+} and Nb{sup 5+} cations reduces the interstitial oxygen content, which causes a decrease in the solid-solution electrical conductivity by 1–2 orders of magnitude and a decrease in the cubic unit-cell parameter. A wide diffuse anomaly with a maximum of about 1500–4000 has been observed in the temperature dependence of the permittivity for all single-crystal and polycrystalline samples in the range of 300–900°C.

36 MATERIALS SCIENCE↗

Structure, microstructure and infrared studies of Ba{sub 0.06}(Na{sub 1/2}Bi{sub 1/2}){sub 0.94}TiO{sub 3}-NaNbO{sub 3} ceramics

Lead-free solid solutions (1-x)Ba{sub 0.06}(Na{sub 1/2}Bi{sub 1/2}){sub 0.94}TiO{sub 3}-xNaNbO{sub 3} (0 ≤ x ≤ 1.0) were prepared by conventional ceramic fabrication technique. X-ray diffraction and Rietveld refinement analyses of these ceramics were carried out using X’Pert HighScore Plus software to determine the crystal symmetry, space group and unit cell dimensions. Rietveld refinement revealed that NaNbO{sub 3} with orthorhombic structure was completely diffused into Ba{sub 0.06}(Na{sub 1/2}Bi{sub 1/2}){sub 0.94}TiO{sub 3} lattice having the rhombohedral-tetragonal symmetry. EDS and SEM studies were carried out in order to evaluate the quality and purity of the compounds. SEM images showed a change in grain shape with the increase of NaNbO{sub 3} content. FTIR spectra confirmed the formation of solid solution.

36 MATERIALS SCIENCE↗

The solubility and site preference of Fe{sup 3+} in Li{sub 7−3x}Fe{sub x}La{sub 3}Zr{sub 2}O{sub 12} garnets

A series of Fe{sup 3+}-bearing Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} (LLZO) garnets was synthesized using solid-state synthesis methods. The synthetic products were characterized compositionally using electron microprobe analysis and inductively coupled plasma optical emission spectroscopy (ICP-OES) and structurally using X-ray powder diffraction and {sup 57}Fe Mössbauer spectroscopy. A maximum of about 0.25 Fe{sup 3+} pfu could be incorporated in Li{sub 7−3x}Fe{sub x}La{sub 3}Zr{sub 2}O{sub 12} garnet solid solutions. At Fe{sup 3+} concentrations lower than about 0.16 pfu, both tetragonal and cubic garnets were obtained in the synthesis experiments. X-ray powder diffraction analysis showed only a garnet phase for syntheses with starting materials having intended Fe{sup 3+} contents lower than 0.52 Fe{sup 3+} pfu. Back-scattered electron images made with an electron microprobe also showed no phase other than garnet for these compositions. The lattice parameter, a{sub 0}, for all solid-solution garnets is similar with a value of a{sub 0}≈12.98 Å regardless of the amount of Fe{sup 3+}. {sup 57}Fe Mössbauer spectroscopic measurements indicate the presence of poorly- or nano-crystalline FeLaO{sub 3} in syntheses with Fe{sup 3+} contents greater than 0.16 Fe{sup 3+} pfu. The composition of different phase pure Li{sub 7−3x}Fe{sub x}La{sub 3}Zr{sub 2}O{sub 12} garnets, as determined by electron microprobe (Fe, La, Zr) and ICP-OES (Li) measurements, give Li{sub 6.89}Fe{sub 0.03}La{sub 3.05}Zr{sub 2.01}O{sub 12}, Li{sub 6.66}Fe{sub 0.06}La{sub 3.06}Zr{sub 2.01}O{sub 12}, Li{sub 6.54}Fe{sub 0.12}La{sub 3.01}Zr{sub 1.98}O{sub 12}, and Li{sub 6.19}Fe{sub 0.19}La{sub 3.02}Zr{sub 2.04}O{sub 12}. The {sup 57}Fe Mössbauer spectrum of cubic Li{sub 6.54}Fe{sub 0.12}La{sub 3.01}Zr{sub 1.98}O{sub 12} garnet indicates that most Fe{sup 3+} occurs at the special crystallographic 24d position, which is the standard tetrahedrally coordinated site in garnet. Fe{sup 3+} in smaller amounts occurs at a general 96h site, which is only present for certain Li-oxide garnets, and in Li{sub 6.54}Fe{sub 0.12}La{sub 3.01}Zr{sub 1.98}O{sub 12} this Fe{sup 3+} has a distorted 4-fold coordination. - Graphical abstract: Cubic nominally Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} (LLZO) garnet is a promising candidate to be used as a solid electrolyte in Li-ion batteries. A series of Fe{sup 3+}-bearing LLZO garnets was synthesized and characterized compositionally and structurally. {sup 57}Mössbauer measurements were made to determine where Fe is incorporated in the crystal structure. X-ray diffraction, electron microprobe, ICP-OES and {sup 57}Mössbauer measurements are needed to obtain a full description of the synthetic products, some of which contain small amounts of nano- or poorly crystalline FeLaO{sub 3}. - Highlights: • A series of Fe{sup 3+}-bearing Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} (LLZO) garnets was synthesized and characterized compositionally and structurally. • {sup 57}Mössbauer measurements were made to determine where Fe is incorporated in the crystal structure. • Most Fe{sup 3+} substitutes for Li{sup +} in LLZO at the 24d and 96h sites in the cubic phase (Ia-3d). • No more than about 0.25 Fe{sup 3+} pfu can be incorporated into the LLZO garnet structure. • X-ray powder diffractions measurements indicate the presence of both cubic and tetragonal garnets phases in some syntheses. • The probable presence of small amounts of poorly or nano-crystalline FeLaO3 can only be identified by Mössbauer spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogenation properties of Li{sub x}Sr{sub 1−x}AlSi studied by quantum-chemical methods (0≤x≤1) and in-situ neutron powder diffraction (x=1)

In-situ neutron powder diffraction studies of the Half-Heusler phase LiAlSi under high deuterium pressures and first principle calculations of solid solutions of Li{sub x}Sr{sub 1−x}AlSi and their hydrides Li{sub x}Sr{sub 1−x}AlSiH were carried out. In contrast to an earlier study, there is no experimental evidence for hydrogen (deuterium) uptake up to gas pressures of 15 MPa and temperatures of 550 °C. Instead a slow decomposition reaction according to LiAlSi+1/2H{sub 2}=LiH+Al+Si was found by in-situ neutron powder diffraction. Theoretical calculations by DFT methods on hypothetical solid solutions of Li{sub x}Sr{sub 1−x}AlSi show the LiAlSi type to be the energetically most stable structure for 0.7<x and the SrAlSi type structure for lower values of x. Hydrides Li{sub x}Sr{sub 1−x}AlSiH favor the SrAlSiH type for all values of x instead of the structure proposed earlier with hydrogen occupying tetrahedral voids in a LiAlSi structure. As an alternative for a cubic structure for LiAlSiH, we suggest the existence of LiAlSiH in the trigonal SrAlSiH type structure and it might be a candidate worthwhile to be considered for preparative work. - Graphical abstract: In-situ neutron powder diffraction of LiAlSi under high D{sub 2} pressure. - Highlights: • In-situ neutron powder diffraction of LiAlSi under high D{sub 2} pressure was carried out. • LiAlSi decomposes according to LiAlSi + ½ H{sub 2} = LiH + Al + Si. • Mixed crystals Li{sub x}Sr{sub 1-x}AlSi and LixSr{sub 1-x}AlSiH were studied theoretically.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure detection of Mg-Zi-Ti-Si amorphous composite coating prepared by SMAT

Highlights: • The Mg-Zn-Ti-Si amorphous composite coating was prepared on Mg alloy via SMAT. • Except for amorphous portion, the phases of coating include Zn, Mg{sub 7}Zn{sub 3}, and Si. • The coating was thick and rough but it was well combined with the matrix. • During SMAT, the matrix surface was also strengthened because of solid-solution and grain refinement. - Abstract: The Mg-Zn-Ti-Si coating was prepared on Mg alloy through surface mechanical attrition treatment (SMAT) which was simple and low-cost. The microstructure and phase composition of coating were detected through a scanning electron microscope (SEM), an X-ray diffractometer (XRD) and a high resolution transmission electron microscope (HRTEM). The results demonstrated that the layer thickness, which depended on the rotation speed, was 20–80 μm. Although the coating was rough, it was well combined with the matrix. The XRD pattern and HRTEM image analysis demonstrated that the coating contained both amorphous and crystalline phases (Zn, Mg{sub 7}Zn{sub 3} and Si). The process also led to matrix surface strengthening; the mechanisms are solid solution and grain refinement.

36 MATERIALS SCIENCE↗

Defects clustering and ordering in di- and trivalently doped ceria

Graphical abstract: Display Omitted Highlights: ► Defect structures in trivalently and divalently doped ceria has been elucidated. ► Dumbbell structure is a universal basic vacancy structure in fluorite oxides. ► Electrostatic attraction dominates elastic interaction in doped ceria. ► Provide a physical picture of conductivity behavior in aliovalently doped ceria. -- Abstract: The formation and growth of defect clusters in CeO{sub 2}-M{sub 2}O{sub 3} (M = La{sup 3+}, Pr{sup 3+}, Sm{sup 3+}, Gd{sup 3+}, Dy{sup 3+}, Y{sup 3+}, Yb{sup 3+}) and CeO{sub 2}-DO (N = Cd{sup 2+}, Ca{sup 2+}, Sr{sup 2+}, Ba{sup 2+}) binary solid solutions have been comparatively studied by atomistic simulations based on energy minimization of atomic interactions. The calculation ensemble, including both divalent and trivalent dopants, shows a similar energetic tendency for defect species (dopants and associated oxygen vacancies) to aggregate and grow. The dumbbell structure has been verified as a universal vacancy structure in oxygen deficient fluorite lattice. Nevertheless, it also demonstrates different tendencies of dopant–vacancy associations that depend on dopant valence and radius. The dopant is site-selective in trivalent defect clusters correlated with dopant size. While in divalent solid solutions, clusters adopt similar dopant–vacancy locations. Furthermore, all clusters in divalently doped ceria have stronger dopant–vacancy associations/interactions compared to those in trivalent ones. As a consequence, the correlation of the dopant size as well as valence effects on oxygen-ion conductivity has been illustrated based on an ordered defect cluster model. This study thereby offers insight into the physical picture of ionic conductivity behavior experimentally obtained in aliovalently doped ceria.

36 MATERIALS SCIENCE↗

Effect of W6+ dopant on the morphology and luminescence properties of NaLa(MoO4)2: Eu3+ phosphors

Highlights: • NaLa(W{sub x}Mo{sub 1−x}O{sub 4}){sub 2}: Eu{sup 3+} with various shapes were synthesized via hydrothermal method. • No structural modifier or organic solvents were used. • Morphology and luminescence properties were manipulated by mole ratio of W/Mo. • NaLa(W{sub x}Mo{sub 1−x}O{sub 4}){sub 2}:Eu{sup 3+} was brighter than that of Com-Y{sub 2}O{sub 3}: Eu{sup 3+}. - Abstract: W{sup 6+} dopant on the NaLa(MoO{sub 4}){sub 2}:Eu{sup 3+} solid solution phosphors with various shapes have been synthesized via the hydrothermal method without using any structural modifier and organic solvents. The morphology and luminescence properties of W{sup 6+} doped NaLa(MoO{sub 4}){sub 2}:Eu{sup 3+} phosphors are obtained and characterized by SEM and PL/PLE spectra. Both morphology and luminescence properties are considered to manipulate by the mole ratio of W/Mo. By increasing the W{sup 6+} amount, particle shapes are changed from rice-shaped particles to spindle-shaped, cocoon-shaped, then to layers of octahedron-shaped. Under UV light excitation, all samples show bright red light due to the characteristic 4f-4f transitions of Eu{sup 3+}. Tungstate and molybdate phosphors have higher luminescence intensity than that of tungstate and molybdate solid solution phosphors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase diagrams of the Tb-Ag-In and Dy-Ag-In systems at 870 K

The phase equilibria of Tb-Ag-In and Dy-Ag-In ternary systems have been studied at 870 K in the whole concentration range by means of X-ray powder, single crystal X-ray diffraction and EDX analyses. Isothermal sections of Tb-Ag-In and Dy-Ag-In phase diagrams at this temperature have been constructed. Both systems are characterized by formation of three ternary compounds: REAg{sub 3}In{sub 3} (YbAg{sub 2}In{sub 4}-type, space group Im-3), REAg{sub 2}In (MnCu{sub 2}Al-type, space group Fm-3m) and RE{sub 2}AgIn{sub 3} (CaIn{sub 2}-type, space group P6{sub 3}/mmc) RE=Tb, Dy. Homogeneity ranges of the ternary phases with CaIn{sub 2} structure type lies from 35 to 60 at% of In for Tb-containing phase and from 39 to 50 at% of In for Dy-containing phase. The existence of solid solutions based on REAg (CsCl-type, space group Pm-3m) binary compounds up to 30 at% of In and REIn{sub 3} (AuCu{sub 3}-type, space group Pm-3 m) binary compounds up to 5 at% of Ag has been found. - Graphical Abstract: Phase relations in the ternary systems Tb-Ag-In and Dy-Ag-In have been established for the isothermal section at T=870 K based on X-ray powder and single crystal diffraction analyses. The existence of three ternary compounds in each system were observed. Highlights: Black-Right-Pointing-Pointer Isothermal section of Tb-Ag-In system at T=870 K was constructed. Black-Right-Pointing-Pointer Isothermal section of Dy-Ag-In system at T=870 K was constructed. Black-Right-Pointing-Pointer Three ternary compounds and two solid solutions in each system were detected.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of dilution on the spin pairing transition in rhombohedral carbonates

The compressibility of an iron-bearing magnesite (Mg{sub 0.87}Fe{sub 0.12}{sup 2+}Ca{sub 0.01}) CO{sub 3} was determined by means of single crystal diffraction up to 64 GPa. Up to 49 GPa the pressure-evolution of the unit cell volume of the solid solution with 12% of Fe{sup 2+} can be described by a third-order Birch-Murnaghan equation of state with parameters V{sub 0} = 281.0(5) {angstrom}{sup 3}, K{sub 0} = 102.8(3) GPa, K{prime}{sub 0} = 5.44. The spin pairing of the Fe{sup 2+} d-electrons occurs between 49 and 52 GPa, as evidenced by a discontinuous volume change. The transition pressure is increased by about 5 GPa compared with the iron end-member; an effect consistent with a cooperative contribution of adjacent clusters to the spin transition. The trend is, however, opposite in the periclase-wustite solid solution. Differences among the two structures, in particular in the Fe-Fe interactions, that might explain the different behavior are discussed.

36 MATERIALS SCIENCE↗