Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “smoothing techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Effects of Laser and Shot Peening on Fatigue Crack Growth in Friction Stir Welds

The effects of laser, and shot peening on the fatigue life of Friction Stir Welds (FSW) have been investigated. The surface roughness resulting from various peening techniques was assessed, and the fracture surfaces microstructure was characterized. Laser peening resulted in an increase in fatigue life approximately 60%, while shot peening resulted in 10% increase when compared to the unpeened material. The surface roughness of shot peening was significantly higher compared to the base material, while specimens processed with laser peening were relatively smooth.

Hatamleh, Omar↗
NASA NTRS1996

Combinations of Earth Orientation Measurements: SPACE94, COMB94, and POLE94

A Kalman filter has been used to combine independent measurements of the Earth's orientation taken by the space-geodetic observing techniques of lunar laser ranging, satellite laser ranging, very long baseline interferometry, and the Global Positioning System. Prior to their combination, the data series were adjusted to have the same bias and rate, the stated uncertainties of the measurements were adjusted, and data points considered to be outliers were deleted. The resulting combination, SPACE94, consists of smoothed, interpolated polar motion and UT1-UTC values spanning October 6.0, 1976, to January 27.0, 1995, at 1-day intervals.

Kalman↗
DOE OSTI2018

Enhanced calcium entry via activation of NOX/PKC underlies increased vasoconstriction induced by methylglyoxal

Advanced glycation end-products (AGEs) play a pivotal role in macro- and micro-vascular diabetic complications. We investigated the mechanism by which methylglyoxal (an endogenous generator of AGEs) affects vascular contractility using the isolated artery technique. Contractile responses to vasoconstrictors phenylephrine (PE), angiotensin II (Ang II), vasopressin (VP) and KCl were measured in the isolated rat aorta following one-our exposure to methylglyoxal (50–200 μM). The perfused rat kidney was employed to confirm the effect of methylglyoxal on microvessels. Methylglyoxal-induced changes in cytosolic calcium were measured in the smooth muscle layer of the aorta with the calcium-sensing fluorophore Fluo-4 AM. Methylglyoxal significantly increased maximal contraction of the rat aorta to PE, Ang II and VP. Similar results were seen in response to the depolarizing vasoconstrictor KCl in macro and micro vessels. The methylglyoxal-induced increases in aortic contraction mediated by the agonist and KCl were endothelium independent. Methylglyoxal-induced increases in KCl-dependent aortic contraction were abolished after the removal of extracellular calcium or in the presence of the calcium channel blocker nifedipine. Incubation with the antioxidant N-acetyl-l-cysteine (NAC), apocynin (a nonselective NADPH oxidase (NOX) inhibitor) or chelerythrine (a protein kinase C (PKC) inhibitor) prior to methylglyoxal pre-treatment reversed the methylglyoxal-induced increases in the rat aortic contractility. In conclusion, the formation of AGEs increases vasoconstriction of both macro- and micro-vessels by increasing the voltage-activated calcium entry in vascular smooth muscles in a NOX and PKC dependent manner.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2014

SU-F-18C-02: Evaluations of the Noise Power Spectrum of a CT Iterative Reconstruction Technique for Radiation Therapy

Purpose: To quantitatively assess the noise power spectrum (NPS) of the new, commercially released CT iterative reconstruction technique, iDose{sup 4} from Philips, to compare it with filtered back-projection techniques (FBP), and to provide clinical practice suggestions for radiation therapy. Methods: A uniform phantom was CT imaged with 120kVp tube potential over a range of mAs (250-3333). The image sets were reconstructed using two reconstruction algorithms (FBP and iDose{sup 4} with noise reduction levels 1, 3, and 6) and three reconstruction filters (standard B, smooth A, and sharp C), after which NPS variations were analyzed and compared on region of interest (ROI) sizes (16×16 to 128×128 pixels), ROI radii (0–65 mm), reconstruction algorithms, reconstruction filters, and mAs. Results: The NPS magnitude and shape depended considerably on ROI size and location for both reconstruction algorithms. Regional noise variance became more stationary as ROI size decreased, minimizing NPS artifacts. The optimal 32×32-pixel ROI size balanced the trade-off between stationary noise and adequate sampling. NPS artifacts were greatest at the center of reconstruction space and decreased with increasing ROI distance from the center. The optimal ROI position was located near the phantom's radial midpoint (∼40mm). For sharper filters, the NPS magnitude and the maximum magnitude frequency increased. Higher dose scans yielded lower NPS magnitudes for both reconstruction algorithms and all filters. Compared to FBP, the iDose{sup 4} algorithm reduced the NPS magnitude while preferentially reducing noise at mid-range spatial frequencies, altering noise texture. This reduction was more significant with increasing iDose{sup 4} noise reduction level. Conclusion: Compared to pixel standard deviation, NPS has greater clinical potential for task-based image quality assessment, describing both the magnitude and spatial frequency characteristics of image noise. While iDose{sup 4} reduces the NPS magnitude more dramatically than FBP, further studies are needed to assess the impacts of noise texture alteration on its clinical usage.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2016

Hard X-ray mirrors for Nuclear Security

Research performed under this LDRD aimed to demonstrate the ability to detect and measure hard X-ray emissions using multilayer X-ray reflective optics above 400 keV, to enable the development of inexpensive and high-accuracy mirror substrates, and to investigate applications of hard X-ray mirrors of interest to the nuclear security community. Experiments conducted at the European Synchrotron Radiation Facility demonstrated hard X-ray mirror reflectivity up to 650 keV for the first time. Hard X-ray optics substrates must have surface roughness under 3 to 4 Angstrom rms, and three materials were evaluated as potential substrates: polycarbonates, thin Schott glass and a new type of flexible glass called Willow Glass®. Chemical smoothing and thermal heating of the surface of polycarbonate samples, which are inexpensive but have poor intrinsic surface characteristics, did not yield acceptable surface roughness. D263 Schott glass was used for the focusing optics of the NASA NuSTAR telescope. The required specialized hardware and process were costly and motivated experiments with a modified non-contact slumping technique. The surface roughness of the glass was preserved and the process yielded cylindrical shells with good net shape pointing to the potential advantage of this technique. Finally, measured surface roughness of 200 and 130 μm thick Willow Glass sheets was between 2 and 2.5 A rms. Additional results of flexibility tests and multilayer deposition campaigns indicated it is a promising substrate for hard X-ray optics. The detection of U and Pu characteristics X-ray lines and gamma emission lines in a high background environment was identified as an area for which X-ray mirrors could have an impact and where focusing optics could help reduce signal to noise ratio by focusing signal onto a smaller detector. Hence the first one twelvetant of a Wolter I focusing optics for the 90 to 140 keV energy range based on aperiodic multilayer coating was designed. Finally, we conducted the first demonstration that reflective multilayer mirrors could be used as diagnostic for HED experiment with an order of magnitude improvement in signal-to-noise ratio for the multilayer optic compared a transmission crystal spectrometer.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Magnetic Nitride Films for Superconducting Memory Devices

This work investigated pulsed laser deposition of Cr-doped AlN thin films for use as ferromagnetic layers in memory cells for superconducting electronics. The film morphology, crystalline structure, and magnetization were investigated as a function of laser fluence on the target and background N 2 pressure during deposition. Higher laser fluence resulted in films composed of a smooth underlayer with a high density of poorly adhered, rough crystallites at the surface. Lower laser fluence reduced the density of surface crystallites significantly. X-ray diffraction showed that films grown at high laser fluence show crystalline peaks associated with AlN. Both types of films showed hysteretic magnetization curves consistent with films grown by other deposition techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1978

An unconventional approach to imaging radar calibration

An unconventional approach to imaging radar calibration was considered for the entire system, including the imaging processing as a measurement instrument. The technique made use of a calibrated aircraft scatterometer as a secondary standard to measure the backscatter (sigma zero) of large units of constant roughness. These measured roughness units when viewed by an imaging radar system can be used to provide gray scale level, corresponding to known degrees of roughness. To obtain a calibrated aircraft scatterometer, a homogeneous smooth surface was measured by both the aircraft scatterometer and a sphere calibrated ground system. This provided a measure of the precision and accuracy of the aircraft system. The aircraft system was then used to measure large roughness units in the Death Valley, California area. Transfer of the measured roughness units to radar imagery was demonstrated.

Fenner, R. G.↗
NASA NTRS1983

Algebraic grid generation with corner singularities

A simple noniterative algebraic procedure is presented for generating smooth computational meshes on a quadrilateral topology. Coordinate distribution and normal derivative are provided on all boundaries, one of which may include a slope discontinuity. The boundary conditions are sufficient to guarantee continuity of global meshes formed of joined patches generated by the procedure. The method extends to 3-D. The procedure involves a synthesis of prior techniques stretching functions, cubic blending functions, and transfinite interpolation - to which is added the functional form of the corner solution. The procedure introduces the concept of generalized blending, which is implemented as an automatic scaling of the boundary derivatives for effective interpolation. Some implications of the treatment at boundaries for techniques solving elliptic PDE's are discussed in an Appendix.

Vinokur, M.↗
NASA NTRS1987

Effect of rib angle on local heat/mass transfer distribution in a two-pass rib-roughened channel

The naphthalene sublimation technique is used to investigate the heat transfer characteristics of turbulent air flow in a two-pass channel. A test section that resembles the internal cooling passages of gas turbine airfoils is employed. The local Sherwood numbers on the ribbed walls were found to be 1.5-6.5 times those for a fully developed flow in a smooth square duct. Depending on the rib angle-of-attack and the Reynolds number, the average ribbed-wall Sherwood numbers were 2.5-3.5 times higher than the fully developed values.

Chandra, P. R.↗
NASA NTRS1989

Euler solvers for transonic applications

The 1980s may well be called the Euler era of applied aerodynamics. Computer codes based on discrete approximations of the Euler equations are now routinely used to obtain solutions of transonic flow problems in which the effects of entropy and vorticity production are significant. Such codes can even predict separation from a sharp edge, owing to the inclusion of artificial dissipation, intended to lend numerical stability to the calculation but at the same time enforcing the Kutta condition. One effect not correctly predictable by Euler codes is the separation from a smooth surface, and neither is viscous drag; for these some form of the Navier-Stokes equation is needed. It, therefore, comes as no surprise to observe that the Navier-Stokes has already begun before Euler solutions were fully exploited. Moreover, most numerical developments for the Euler equations are now constrained by the requirement that the techniques introduced, notably artificial dissipation, must not interfere with the new physics added when going from an Euler to a full Navier-Stokes approximation. In order to appreciate the contributions of Euler solvers to the understanding of transonic aerodynamics, it is useful to review the components of these computational tools. Space discretization, time- or pseudo-time marching and boundary procedures, the essential constituents are discussed. The subject of grid generation and grid adaptation to the solution are touched upon only where relevant. A list of unanswered questions and an outlook for the future are covered.

Vanleer, Bram↗
NASA NTRS1988

Random field estimation approach to multibody dynamics

The use of recursive techniques similar to random field models to factor and invert the inertia matrix of a multibody system is discussed. An equivalence is established between the composite multibody system inertia matrix and the covariance of the output of a described linear system model. Conditional mean estimation and sequential estimation problems are solved along with problems of filtering and smoothing. Formulas are developed to compute the covariance of several relevant quantities. The foregoing results are used to obtain the inverse of the composite multibody system inertia in closed form.

Rodriguez, G.↗
DOE OSTI2018

Enhanced Exciplex Emission of Pyrene Thin Films Doped by Perylene: Structural, Photophysical and Morphological Investigation

The present work reports on the preparation of thin films of pyrene luminophors doped by varying amounts of perylene by spin coating technique. The structural, morphological, and photophysical properties of pyrene thin films have been investigated as a function of perylene contents. X-ray diffraction studies of doped thin films show well-defined peaks, and estimated crystallite size decreases with increasing perylene content, due to the formation of closed packed crystal structure. SEM images of pure pyrene revealed smooth, and compact and separated crystals with amounts of perylene. The result of absorption spectra showed decrease in intensity with perylene content. However, the fluorescence spectra of pyrene containing higher amounts of perylene showed broad and structureless exciplex emission at 510 nm. The emission colour of pyrene luminophors tuned from blue to green by controlling the concentration of perylene. The phenomenon of change in colour was seen due to efficient excitation energy transfer from pyrene to perylene in thin films. It also found that the intensity of exciplex emission increases with increasing concentration of perylene is of high demand in fluorescent lamp as well as green organic light emitting diodes.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Simulations of Tidal Disruption Events

Numerical simulations have historically played a major role in understanding the hydrodynamics of the tidal disruption process. Given the complexity of the geometry of the system, the challenges posed by the problem have indeed stimulated much work on the numerical side. Smoothed Particles Hydrodynamics methods, for example, have seen their very first applications in the context of tidal disruption and still play a major role to this day. Likewise, initial attempts at simulating the evolution of the disrupted star with the so-called affine method have been historically very useful. Here, we provide an overview of the numerical techniques used in the field and of their limitations, and summarize the work that has been done to simulate numerically the tidal disruption process.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2014

Effect of annealing on the properties of Sb doped ZnO thin films prepared by spray pyrolysis technique

Sb doped ZnO thin films have been deposited on glass substrate at 450°C using spray pyrolysis technique. The X-ray diffraction studies revealed that the as deposited films are polycrystalline in nature with (100) preferred orientation. Whereas the films annealed at 450° C for 6h show a preferential orientation along (101) direction. Crystallites size varies from 15.7 nm to 34.95 nm with annealing duration. The Scanning electron microscopic analysis shows the plane and smooth surface of the films. The optical properties of annealed films have shown a variation in the band gap between 3.37 eV and 3.19 eV. Transparency of as grown and annealed films decreases from 78 % to 65% respectively in the visible region. The electrical conductivity of the as grown film shows an increase in the electrical conductivity by one order of magnitude with increase in the annealing duration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

High quality, giant crystalline-Ge stripes on insulating substrate by rapid-thermal-annealing of Sn-doped amorphous-Ge in solid-liquid coexisting region

Formation of large-grain (≥30 μm) Ge crystals on insulating substrates is strongly desired to achieve high-speed thin-film transistors. For this purpose, we propose the methods of Sn-doping into amorphous-Ge combined with rapid-thermal-annealing (RTA) in the solid-liquid coexisting temperature region for the Ge-Sn alloy system. The densities of micro-crystal-nuclei formed in this temperature region become low by tuning the RTA temperature close to the liquidus curve, which enhances the lateral growth of GeSn. Thanks to the very small segregation coefficient of Sn, almost all Sn atoms segregate toward edges of the stripes during growth. Agglomeration of GeSn degrades the surface morphologies; however, it is significantly improved by lowering the initial Sn concentration. As a result, pure Ge with large crystal grains (∼40 μm) with smooth surface are obtained by optimizing the initial Sn concentration as low as 3 ∼ 5%. Lateral growth lengths are further increased through decreasing the number of nuclei in stripes by narrowing stripe width. In this way, high-crystallinity giant Ge crystals (∼200 μm) are obtained for the stripe width of 3 μm. This “Si-seed free” technique for formation of large-grain pure Ge crystals is very useful to realize high-performance thin-film devices on insulator.

36 MATERIALS SCIENCE↗
DOE OSTI2014

YOUNG STARS IN AN OLD BULGE: A NATURAL OUTCOME OF INTERNAL EVOLUTION IN THE MILKY WAY

The center of our disk galaxy, the Milky Way, is dominated by a boxy/peanut-shaped bulge. Numerous studies of the bulge based on stellar photometry have concluded that the bulge stars are exclusively old. The perceived lack of young stars in the bulge strongly constrains its likely formation scenarios, providing evidence that the bulge is a unique population that formed early and separately from the disk. However, recent studies of individual bulge stars using the microlensing technique have reported that they span a range of ages, emphasizing that the bulge may not be a monolithic structure. In this Letter we demonstrate that the presence of young stars that are located predominantly nearer to the plane is expected for a bulge that has formed from the disk via dynamical instabilities. Using an N-body+ smoothed particle hydrodynamics simulation of a disk galaxy forming out of gas cooling inside a dark matter halo and forming stars, we find a qualitative agreement between our model and the observations of younger metal-rich stars in the bulge. We are also able to partially resolve the apparent contradiction in the literature between results that argue for a purely old bulge population and those that show a population comprised of a range in ages; the key is where to look.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1975

A program for contouring randomly spaced data

A description is given of a digital computer program which prepares contour plots of three dimensional data. The contouring technique uses a triangulation procedure. As presently configured, the program can accept up to 56,000 randomly spaced data points, although the required computer resources may be prohibitive. However, with relatively minor internal modifications, the program can handle essentially unlimited amounts of data. Up to 20 contouring intervals can be selected and contoured with either polygonal lines or smooth curves. Sample cases are illustrated. A general description of the main program and primary level subroutines is included to permit simple modifications of the program.

Hamm, R. W.↗
NASA NTRS1978

Time-delay-and-integration charge coupled devices /CCDs/ applied to the Thematic Mapper

The visible focal plane of the Thematic Mapper, the next generation sensor system for application to earth resource survey, uses complex hybrid assembly techniques to interface silicon photodiodes to JFET preamplifiers. This complexity can be ameliorated by the use of a 20-channel time-delay-and-integration (TDI) CCD with nine stages of integration per channel. By going to a CCD array operating in a TDI mode, over 700 individual op amps can be replaced with only 48 op amps. Smooth spectral response and 70% quantum efficiency have been provided by using doped tin oxide gates over the imaging region.

Thompson, L. L.↗