Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shock wave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Transonic aerodynamic and aeroelastic characteristics of a variable sweep wing

The flow over the B-1 wing is studied computationally, including the aeroelastic response of the wing. Computed results are compared with results from wind tunnel and flight tests for both low-sweep and high-sweep cases, at 25.0 and 67.5 deg., respectively, for selected transonic Mach numbers. The aerodynamic and aeroelastic computations are made by using the transonic unsteady code ATRAN3S. Steady aerodynamic computations compare well with wind tunnel results for the 25.0 deg sweep case and also for small angles of attack at the 67.5 deg sweep case. The aeroelastic response results show that the wing is stable at the low sweep angle for the calculation at the Mach number at which there is a shock wave. In the higher sweep case, for the higher angle of attack at which oscillations were observed in the flight and wind tunnel tests, the calculations do not show any shock waves. Their absence lends support to the hypothesis that the observed oscillations are due to the presence of leading edge separation vortices and are not due to shock wave motion as was previously proposed.

Goorjian, P. M.↗

Transonic aeroelastic analysis of the B-1 wing

The flow over the B-1 wing is studied computationally, including the aeroelastic response of the wing. Computed results are compared with results from wind tunnel and flight tests for both low- and high-sweep cases, at 25.0 and 67.5 deg, respectively, for selected transonic Mach numbers. The aerodynamic and aeroelastic computations are made by using the transonic unsteady code ATRAN3S. Steady aerodynamic computations compare well with wind tunnel results for the 25.0 deg sweep case and also for small angles of attack at 67.5 deg sweep case. The aeroelastic response results show that the wing is stable at the low-sweep angle for the calculation at the Mach number at which there is a shock wave. In the higher-sweep case, for the higher angle of attack at which oscillations were observed in the flight and wind tunnel tests, the calculations do not show any shock waves. Their absence lends support to the hypothesis that the observed oscillations are due to the presence of leading-edge separation vortices and not to shock wave motion, as was previously proposed.

Guruswamy, G. P.↗

Motion of the sources for type 2 and type 4 radio bursts and flare-associated interplanetary disturbances

Shock waves are indirectly observed as the source of type 2 radio brusts, whereas magnetic bottles are identified as the source of moving metric type 4 radio bursts. The difference between the expansion speeds of these waves bottles is examined during their generation and propagation near the flare regions. It is shown that, although generated in the explosive phase of flares, the behavior of the bottles is quite different from that of the waves and that the speed of the former is generally much lower. It is shown that the transit times of disturbances between the sun and the earth give information about the deceleration of shock waves to their local speeds observed near the earth's orbit. A brief discussion is given on the relationship among magnetic bottles, shock waves near the sun, and flare-associated disturbances in interplanetary space.

Sakurai, K.↗

Numerical simulation of three-dimensional supersonic inlet flow fields

Supersonic inlet flows with mixed external-internal compressions of an axisymmetric inlet model were computed using a combined implicit-explicit (Beam-Warming-Steger/MacCormack) method for solving the three-dimensional unsteady, compressible Navier-Stokes equations in conservation form. Numerical calculations were made of various flows typically found in supersonic inlets such as shock-wave intersections, flow spillage around the cowl lip, shock-wave/boundary-layer interactions, control of shock-induced flow separation by means of boundary layer bleed, internal normal (terminal) shocks, and the effects of flow incidence. Computed results were compared with available wind tunnel data.

Kawamura, T.↗

Development of Multi-Physics Dynamics Models for High-Frequency Large-Amplitude Structural Response Simulation

An analytic approach is demonstrated to reveal potential pyroshock-driven dynamic effects causing power losses in the Thermo-Electric (TE) module bars of the Mars Science Laboratory (MSL) Multi-Mission Radioisotope Thermoelectric Generator (MMRTG). This study utilizes high-fidelity finite element analysis with SIERRA/PRESTO codes to estimate wave propagation effects due to large-amplitude suddenly-applied pyro shock loads in the MMRTG. A high fidelity model of the TE module bar was created with approximately 30 million degrees-of-freedom (DOF). First, a quasi-static preload was applied on top of the TE module bar, then transient tri-axial acceleration inputs were simultaneously applied on the preloaded module. The applied input acceleration signals were measured during MMRTG shock qualification tests performed at the Jet Propulsion Laboratory. An explicit finite element solver in the SIERRA/PRESTO computational environment, along with a 3000 processor parallel super -computing framework at NASA AMES, was used for the simulation. The simulation results were investigated both qualitatively and quantitatively. The predicted shock wave propagation results provide detailed structural responses throughout the TE module bar, and key insights into the dynamic response (i.e., loads, displacements, accelerations) of critical internal spring/piston compression systems, TE materials, and internal component interfaces in the MMRTG TE module bar. They also provide confidence on the viability of this high-fidelity modeling scheme to accurately predict shock wave propagation patterns within complex structures. This analytic approach is envisioned for modeling shock sensitive hardware susceptible to intense shock environments positioned near shock separation devices in modern space vehicles and systems.

Shock Waves↗

Shock Structure Analysis and Aerodynamics in a Weakly Ionized Gas Flow

The structure of a shock wave propagating through a weakly ionized gas is analyzed using an electrofluid dynamics model composed of classical conservation laws and Gauss Law. A viscosity model is included to correctly model the spatial scale of the shock structure, and quasi-neutrality is not assumed. A detailed analysis of the structure of a shock wave propagating in a weakly ionized gas is presented, together with a discussion of the physics underlying the key features of the shock structure. A model for the flow behind a shock wave propagating through a weakly ionized gas is developed and used to analyze the effect of the ionization on the aerodynamics and performance of a two-dimensional hypersonic lifting body.

Saeks, R.↗

Decameter type IV bursts associated with coronal transients

The characteristics of four moving type IV burst observed with a 65- to 20-MHz swept-frequency interferometer are discussed. All four bursts were associated with depletions in the electron content of the white light corona. Characteristics of the bursts are not unique i.e., they differ in source size, structure, duration, and their association with other radio bursts. Following Smerd and Dulk (1971), it is assumed that a shock wave, moving out from the flare site is responsible for the expansion of a magnetic arch or the ejection of a plasmoid which is observed as the usual type IV burst. Behind the shock wave, the compressed coronal gas moves outward, and as it expands it causes a depletion of electrons in the inner corona. After the passage of the shock wave, sometimes the coronal magnetic field structure is restored to its initial situation, as evidenced by the observation of homologous transients.

Gergely, T. E.↗

Heat transfer, velocity-temperature correlation, and turbulent shear stress from Navier-Stokes computations of shock wave/turbulent boundary layer interaction flows

The properties of 2-D shock wave/turbulent boundary layer interaction flows were calculated by using a compressible turbulent Navier-Stokes numerical computational code. Interaction flows caused by oblique shock wave impingement on the turbulent boundary layer flow were considered. The oblique shock waves were induced with shock generators at angles of attack less than 10 degs in supersonic flows. The surface temperatures were kept at near-adiabatic (ratio of wall static temperature to free stream total temperature) and cold wall (ratio of wall static temperature to free stream total temperature) conditions. The computational results were studied for the surface heat transfer, velocity temperature correlation, and turbulent shear stress in the interaction flow fields. Comparisons of the computational results with existing measurements indicated that (1) the surface heat transfer rates and surface pressures could be correlated with Holden's relationship, (2) the mean flow streamwise velocity components and static temperatures could be correlated with Crocco's relationship if flow separation did not occur, and (3) the Baldwin-Lomax turbulence model should be modified for turbulent shear stress computations in the interaction flows.

Wang, C. R.↗

Stochastic particle acceleration in solar flares

It is proposed that particles during the second phase of solar flares are accelerated by stochastic resonant scattering off hydromagnetic waves and first order Fermi acceleration in shock waves generated in the impulsive phase of the flare. Solutions allow arbitrary power law momentum dependences of the momentum diffusion coefficient as well as the momentum diffusion coefficient as well as the momentum loss time. The acceleration time scale to a characteristic energy approximately 100 keV for protons can be as short as 5s. The resulting electron spectra show a characteristic double power law with a transition around 200 keV and are correlated to the proton spectra evaluated under equal boundary conditions, indicating that electrons and protons are accelerated by the same mechanism. The correlation between the different spectral indices in the electron double power law and between electron and proton spectra are governed by the ratio of first to second order acceleration and therefore allow a determination of the Alfven Mach number of the shock wave.

Droege, W.↗

The structure of shocks with thermal conduction and radiative cooling

A general analysis is presented of the structure of a steady state, plane-parallel shock wave in which both thermal conduction and radiative cooling are important. The fluid is assumed to have a perfect-gas equation of state, with radiative cooling a function only of its temperature and density. Conduction in both diffusive and saturated regimes is treated. For the case of a strong shock, with conductivity and cooling function varying as power laws in temperature, approximate analytic solutions describing the shock wave are derived. For a plasma of solar composition, conduction is found to have a significant effect on the shock temperature and overall thickness of the postshock layer only for shock velocities greater than about 30,000 km/s, corresponding to shock temperatures greater than about 10 to the 10th K, but it affects the local structure of parts of the shock wave at much lower velocities. The effects of conduction are greatly enhanced if the heavy-element abundance is increased.

Lacey, Cedric G.↗

Numerical study of an explosion in a non-homogeneous medium with and without magnetic fields

A version of the two step Lax-Wendroff difference method with second order accuracy is used to seek solutions of the unsteady magnetohydrodynamic (MHD) equations for the study of an explosion in a non-homogeneous medium with and without magnetic fields. The explosion is initiated by introducing a finite amount of energy in a small volume of gas which leads to an instantaneous increase of gas temperature. Two types of magnetic field configurations (i.e. open and closed) are considered to illustrate the dependence and differences of magnetic and a non-magnetic flow motion. Numerical results show the strong dependence of induced MHD flow field on the magnetic field configuration and strength. The development and decay of the fast and slow MHD shock waves, as well as the ordinary gasdynamic shock waves, are also represented well by the present computer simulations. In conclusion, we have demonstrated that the numerical scheme we have used is a reliable one for studying 2-dimensional MHD problems in non-homogeneous medium.

Han, S. M.↗

Preliminary airborne measurements for the SR-71 sonic boom propagation experiment

SR-71 sonic boom signatures were measured to validate sonic boom propagation prediction codes. An SR-71 aircraft generated sonic booms from Mach 1.25 to Mach 1.6, at altitudes of 31,000 to 48,000 ft, and at various gross weights. An F-16XL aircraft measured the SR-71 near-field shock waves from close to the aircraft to more than 8,000 ft below, gathering 105 signatures. A YO-3A aircraft measured the SR-71 sonic booms from 21,000 to 38,000 feet below, recording 17 passes. The sonic booms at ground level and atmospheric data were recorded for each flight. Data analysis is underway. Preliminary results show that shock wave patterns and coalescence vary with SR-71 gross weight, Mach number, and altitude. For example, noncoalesced shock wave signatures were measured by the YO-3A at 21,000 ft below the SR-71 aircraft while at a low gross weight, Mach 1.25, and 31,000-ft altitude. This paper describes the design and execution of the flight research experiment. Instrumentation and flight maneuvers of the SR-71, F-16XL, and YO-3A aircraft and sample sonic boom signatures are included.

Haering, Edward A., Jr.↗

'GAIM' - Gas-addition, impedance-matched arc driver

A conceptual view for a GAIM energy/driver system to maximize shock-tube performance through efficient interfacing of the energy source with the gas dynamics of the arc driver is presented. Electrical and arc-chamber requirements are evaluated utilizing two new computer codes. One code calculates the shock wave generated for a selected time rate and magnitude of arc-energy input; the other computes the values of external circuit elements required to produce the selected energy input, with the driver represented as the load element of the electrical discharge circuit. Results indicate that the energy-storage capability and the driver arrangement needed to produce the highest shock Mach number can be achieved by means of driver gas addition and by impedance matching (GAIM). Design criteria are presented for arc energy requirements necessary to produce given shock-wave speeds. Shock velocities as high as the 70 km/sec required for simulating Jovian entry now seem possible in shock-tube operation. Practical implementation of a GAIM system is discussed.

Dannenberg, R. E.↗

Is the common definition of the Mie-Grueneisen equation of state inconsistent

Anharmonic models are used to describe the high temperatures and the electronic effects characteristic of shock wave phenomena and planetary interiors. It is found that a generalized Grueneisen function dependent on temperature and volume is necessary for the self-consistent application of the Mie-Grueneisen equation at the physical conditions encountered in shock wave phenomena or in the interior of planets. It is noted that at temperatures of a few thousand degrees Kelvin, by deriving the function in terms of anharmonic lattice dynamics, the difference between gamma and gamma(th) is of the same order of a magnitude as gamma. This leads to the conclusions that (1) gamma is not a function of temperature and (2) gamma?gamma(th) does not explain either the equation of state of planetary interiors or high-temperature shock wave phenomena.

Mulargia, F.↗

Interactions of oblique interplanetary discontinuities and their manifestations during STIP intervals 15-19

The generation of slow shock waves as the result of the interaction of Alfven discontinuities with solar wind contact surfaces is considered. The latter are taken to be the boundaries of proton and alpha-particle concentration inhomogeneities. It is found that the intensity of the Alfven discontinuity may be increased as the result of its interaction with the more dense plasma. The converse (i.e., decrease of the Alfven discontinuity's intensity following interaction with a less dense plasma) is also indicated. Also discussed is the generation of a magnetic cloud as the result of the interaction of a quasi-parallel Alfven discontinuity with a dense plasma contact surface. It is shown that the (solar-generated) Alfven discontinuity may then be transformed into non-flare fast and slow shock waves as the result of this interaction. Thus, it is indicated that some fast shock waves in the solar wind may have a nonsolar origin.

Grib, S. A.↗

The observation of a coronal transient directed at earth

The paper reports the observation of a large coronal transient that can only be interpreted as a three-dimensional structure. Its form is one which has not been observed before: a gradually expanding, sun-centered disk of excess brightness, whose projected radius increased from 4 to 8 solar radii during 0832-0958 UT on November 27, 1979. This earth-directed transient was the source of an interplanetary shock wave that reached ISEE 3 at 0649 UT, November 30, and earth at 0738 UT, November 30. Fitting the shock speed at ISEE 3 and the average transit speed from the sun to ISEE 3 to a power law of the form V = (V sub 0)(r exp -n), it is found that V sub 0 = 1980 km/s and n = 0.294, in good agreement with shock wave models. The shock speed predicted by the power law at 10 solar radii is 1000 km/s, in good agreement with the estimated frontal speed of the transient.

Howard, R. A.↗