Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sensor data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Antarctic ice topography and 150 mb circulation from the Nimbus-6 TWERL Experiment

Many TWERLE balloons floating at an altitude of about 12.5 km, traversed the Antarctic during its 1975/6 summer. The balloons' positions were accurately determined by the Nimbus-6 satellite, which also received their sensors' data: radio altimeter, pressure and temperature. Subtracting the altimeter readings from the calculated balloon altitude above sea-level (a.s.l.) provides the Antarctic surface elevation at the balloon subtrack. The balloon altitude a.s.l. is calculated from daily synoptic maps covering latitudes south of 45 deg S. These maps are prepared using the regular radiosonde network supplemented by four times as many TWERLE balloons.

Levanon, N.↗

Remote sensing exploration for metallic mineral resources in central Baja California

Remote sensor data (primarily LANDSAT) was analyzed by photogeologic and computer-assisted enhancement techniques to evaluate the metallic mineral potential of Baja California. Overlays were prepared at 1:1,000,000 and 1:500,000 and included known geologic relationships and mineral occurrences, lineament, drainage and structural patterns, tonal anomalies, and enhancement results. Computer-assisted enhancement and classification of the test sites was performed using the IMAGE 100 system to identify subtle tonal anomalies thought related to mineralization using known sites as analysis guides. Mineral potential maps of Baja California were generated from these analyses and the ten highest priority targets visited. Preliminary assay results (atomic absorption analysis) for the samples recovered showed moderate to high geochemical anomalies for Copper (10 of 12 samples), Zinc (3 of 12 samples) and Lead (4 of 12 samples).

Baker, R. N.↗

An investigation of surface albedo variations during the recent sahel drought

Applications Technology Satellite 3 green sensor data were used to measure surface reflectance variations in the Sahara/Sahel during the recent drought period; 1967 to 1974. The magnitude of the seasonal reflectance change is shown to be as much as 80% for years of normal precipitation and less than 50% for drought years. Year to year comparisons during both wet and dry seasons reveal the existence of a surface reflectance cycle coincident with the drought intensity. The relationship between the green reflectance and solar albedo is examined and estimated to be about 0.6 times the reflectance change observed by the green channel.

Norton, C. C.↗

Dobson spectrophotometer ozone measurements during international ozone rocketsonde intercomparison

Measurements of the total ozone content of the atmosphere, made with seven ground based instruments at a site near Wallops Island, Virginia, are discussed in terms for serving as control values with which the rocketborne sensor data products can be compared. These products are profiles of O3 concentration with altitude. By integrating over the range of altitudes from the surface to the rocket apogee and by appropriately estimating the residual ozone amount from apogee to the top of the atmosphere, a total ozone amount can be computed from the profiles that can be directly compared with the ground based instrumentation results. Dobson spectrophotometers were used for two of the ground-based instruments. Preliminary data collected during the IORI from Dobson spectrophotometers 72 and 38 are presented. The agreement between the two and the variability of total ozone overburden through the experiment period are discussed.

Parsons, C. L.↗

Low power, compact charge coupled device signal processing system

A variety of charged coupled devices (CCDs) for performing programmable correlation for preprocessing environmental sensor data preparatory to its transmission to the ground were developed. A total of two separate ICs were developed and a third was evaluated. The first IC was a CCD chirp z transform IC capable of performing a 32 point DFT at frequencies to 1 MHz. All on chip circuitry operated as designed with the exception of the limited dynamic range caused by a fixed pattern noise due to interactions between the digital and analog circuits. The second IC developed was a 64 stage CCD analog/analog correlator for performing time domain correlation. Multiplier errors were found to be less than 1 percent at designed signal levels and less than 0.3 percent at the measured smaller levels. A prototype IC for performing time domain correlation was also evaluated.

Bosshart, P. W.↗

Turbid water measurements of remote sensing penetration depth at visible and near-infrared wavelength

Remote sensing of water quality is dicussed. Remote sensing penetration depth is a function both of water type and wavelength. Results of three tests to help demonstrate the magnitude of this dependence are presented. The water depth to which the remote-sensor data was valid was always less than that of the Secchi disk depth, although not always the same fraction of that depth. The penetration depths were wavelength dependent and showed the greatest variation for the water type with largest Secchi depth. The presence of a reflective plate, simulating a reflective subsurface, increased the apparent depth of light penetration from that calculated for water of infinite depth.

Morris, W. D.↗

An investigation of surface albedo variations during the recent Sahel drought

Applications Technology Satellite (ATS) 3 green sensor data are used to measure surface reflectance variations in the Sahara/Sahel during the recent drought period 1967-74. The magnitude of the seasonal reflectance change is shown to be as much as 80% for years of normal precipitation and less than 50% for drought years. Year-to-year comparisons during both wet and dry seasons reveal the existence of a surface reflectance cycle coincident with the drought intensity. The relationship between the green reflectance and solar albedo is examined and estimated to be about 0.6 times the reflectance change observed by the green channel.

Norton, C. C.↗

Guidance of an autonomous planetary rover based on a short-range hazard detection system

The guidance of an autonomous planetary roving vehicle using a scanning laser/multidetector terrain sensor for short-range hazard detection has been simulated. The sensor data are used to model the terrain, thereby providing the information required by a path selection algorithm to control the motion of the rover. These simulation studies are providing the basis for developing both the real-time computer control software and the hardware systems for laboratory and field testing of rover.

Yerazunis, S. W.↗

SEASAT-A synthetic aperture radar performance

The SEASAT-A satellite synthetic aperture radar (SAR) is presented, and its performance since it began operation in July 1978, is examined. The imaging radar system, the first to be designed as an orbital scientific instrument, was intended to generate continuous imagery over a 100-km swath at 25-m resolution from an altitude of 800 km. SAR image quality is measured in terms of resolution, the range of detectable radar backscatter, and the contrast ratio, each of which is affected by antenna, sensor, data link, and recording/processor subsystem parameters. Microdensitometer scans of output image film of actual SEASAT-A SAR data reveal a range resolution of less than 25 m, an azimuth resolution of approximately 40 m, a noise equivalent dynamic range of from 9.6 to -21 + or - 5 dB, and an image contrast ratio of 7.5 dB. SEASAT-A SAR performance is concluded to have confirmed the utility of spaceborne radar sensing.

Jordan, R. L.↗

Training site statistics from Landsat and Seasat satellite imagery registered to a common map base

Landsat and Seasat satellite imagery and training site boundary coordinates were registered to a common Universal Transverse Mercator map base in the Newport Beach area of Orange County, California. The purpose was to establish a spatially-registered, multi-sensor data base which would test the use of Seasat synthetic aperture radar imagery to improve spectral separability of channels used for land use classification of an urban area. Digital image processing techniques originally developed for the digital mosaics of the California Desert and the State of Arizona were adapted to spatially register multispectral and radar data. Techniques included control point selection from imagery and USGS topographic quadrangle maps, control point cataloguing with the Image Based Information System, and spatial and spectral rectifications of the imagery. The radar imagery was pre-processed to reduce its tendency toward uniform data distributions, so that training site statistics for selected Landsat and pre-processed Seasat imagery indicated good spectral separation between channels.

Clark, J.↗

On-line structural parameter identification

Algorithms are presented for on-line parameter identification of structural dynamic systems. As an example, they are used to calculate the parameters of a modal model of a flexible beam. The algorithms are tested using hardware consisting of a 12 ft. beam with four voice coil actuators and nine noncontacting displacement sensors. They are programmed in a CDC Cyber 175 digital computer which provides input command signals for the actuators, reads the sensor data, and processes the algorithm to calculate consistent estimates of the modal parameters of the beam. Experimental results are compared with those of simulation analysis.

Thau, F. E.↗

Real-time test of MOCS algorithm during Superflux 1980

A remote sensing experiment was conducted in which success depended upon the real-time use of an algorithm, generated from MOCS (multichannel ocean color sensor) data onboard the NASA P-3 aircraft, to direct the NOAA ship Kelez to oceanic stations where vitally needed sea truth could be collected. Remote data sets collected on two consecutive days of the mission were consistent with the sea truth for low concentrations of chlorophyll a. Two oceanic regions of special interest were located. The algorithm and the collected data are described.

Grew, G. W.↗

A new method for hardware/software integration of strategic systems - Case study of the Space Shuttle

An advanced system integrated self-test has been developed to provide dynamic checkout of all critical subsystems and hardware/software interfaces of the Space Shuttle during pre-launch ground testing. The system modifies hardware sensor data to represent a real flight scenario. This modified data then drives the flight software. The system was sucessfully utilized for three phases of Space Shuttle testing, and will be expanded for use as a maintenance tool.

Haque, S. I.↗

A method for determining the flight readiness of the integrated Space Shuttle system

The Space Shuttle Dynamic Integrated Test (DIT) system is described. The DIT is an open-loop system which makes no attempt to simulate Shuttle sensors, and by which the Shuttle redundancy management system is left unmodified. Open-loop operation is shown to inherently require less computing capacity during a test than the closed-loop alternative. DIT tests have generated a high degree of confidence in the Shuttle hardware, allowing the identification of such problems as a sluggish main fuel valve, which caused a countdown hold seconds before the simulated T-zero, and Main Engine Controller software malfunctions. Attention is given to the combination and substitution of sensor data, the modification of nominal flight software, and the preparation of simulation data. It is noted that greater performance would have been achieved if the interface with DIT had been a design requirement from the outset of Space Shuttle development.

Bacon, I.↗

Space telescope pointing control system

The Space Telescope is a free-flying spacecraft designed for Space Shuttle launch. The Space Telescope's pointing control system slews the optical axis from one target star region of the celestial sphere to the next, and maintains precision pointing for the target star for up to 24 hours. The spacecraft digital computer processes the precision attitude and rate sensor data to generate torque commands for the reaction wheels. The pointing control system has four major elements: the command generator, the control system, the attitude reference processing, and momentum management. The emphasis is on relating design requirements to the hardware and software implementation.

Dougherty, H.↗

Experimental research on structural dynamics and control

This report describes an apparatus at the NASA Langley Research Center for conducting research on dynamics and control of structural dynamics systems. The apparatus consists of a 3.66 m (12 ft.) long flexible beam to which are attached four electromagnetic actuators, nine noncontacting sensors to measure deflection of beam at various locations, and four strain gage type load cells one at each actuator attachment point. The important feature of the apparatus is that the actuators can be controlled and deflection and load sensor data can be processed in real time using the research centers CDC Cyber 175 computer system - thereby allowing research to be conducted on structural dynamics systems using advanced control laws. The facility is described in the report along with a detailed discussion of the actuators used.

Montgomery, R. C.↗

Active control of a flexible beam

Because of inherent low damping and high flexibility, large space structures may require some form of active control of their dynamics. Because of the apparent inability to accurately model the dynamics of these structures, methods for parameter adaptive control are now being developed at Langley. This approach uses a digital computer to process discrete sensor data, identify modal parameters, calculate modal control gains, and then convert the modal forces to real forces. Some of the problems considered are: (1) the possibility that there may be modes to control with limited amounts of hardware, and (2) the required accuracy of identified structural parameters.

Williams, J. P.↗