Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ramping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Prospects and applications of on-chip lasers

Abstract Integrated silicon photonics has sparked a significant ramp-up of investment in both academia and industry as a scalable, power-efficient, and eco-friendly solution. At the heart of this platform is the light source, which in itself, has been the focus of research and development extensively. This paper sheds light and conveys our perspective on the current state-of-the-art in different aspects of application-driven on-chip silicon lasers. We tackle this from two perspectives: device-level and system-wide points of view. In the former, the different routes taken in integrating on-chip lasers are explored from different material systems to the chosen integration methodologies. Then, the discussion focus is shifted towards system-wide applications that show great prospects in incorporating photonic integrated circuits (PIC) with on-chip lasers and active devices, namely, optical communications and interconnects, optical phased array-based LiDAR, sensors for chemical and biological analysis, integrated quantum technologies, and finally, optical computing. By leveraging the myriad inherent attractive features of integrated silicon photonics, this paper aims to inspire further development in incorporating PICs with on-chip lasers in, but not limited to, these applications for substantial performance gains, green solutions, and mass production.

Zhou, Zhican↗
DOE OSTI2024

High-Fidelity Numerical Wave Tank Verification & Validation Study: Wave Generation Through Paddle Motion: Preprint

This paper presents a numerical benchmark study of wave propagation due to a paddle motion using different high-fidelity numerical models, which are capable of replicating the nearly actual physical wave tank testing. A full time series of the measured wave generation paddle motion which was used to generate wave propagation in the physical wave tank will be utilized in each of the models contributed by IEA OES Task 10's participants, which includes both computational fluid dynamics (CFD) and smooth hydrodynamic particle (SPH). The high-fidelity simulations of the physical wave testcase will allow for the evaluation of the initial transient effects from wave ramp-up and its evolution in the wave tank over time for two representative regular waves with varying levels of nonlinearity. A couple of interesting metrics like the predicted wave surface elevation at select wave probes, wave period, and phase-shift in time will be assessed to evaluate the relative accuracy of numerical models versus experimental data within specified time intervals. These models will serve as a guide for modelers in the wave energy community and provide a base case to allow further and more detailed numerical modeling of the fixed Kramer Sphere Cases under wave excitation force wave tank testing.

HYDRO ENERGY,TIDAL AND WAVE POWER↗
DOE OSTI2024

Competitiveness Assessment of Decarbonizing Electricity and Process Heat Supply to a Campus with a Small Nuclear Reactor

This paper analyzes the competitiveness of siting a small nuclear reactor to support decarbonization of sites requiring tens of MW of electricity and/or process heat to support centralized heating and cooling system. This paper focuses on campuses as representative of sites with collections of buildings and research facilities with decarbonization needs represented by buildings heating, and electricity consumption by electrical loads which may include cooling via chilled water (e.g., for air conditioning and to cool down computer clusters). A nuclear reactor can be considered to decarbonize a site’s high-temperature steam generation used mostly for building heating needs, climate control, and hot water, by supplying process heat capabilities, while electricity decarbonization would be achieved mostly by the grid. However, a secondary application can be considered to maximize reactor utilization and avoid ramping down the reactor if the steam demand varies significantly throughout the year. Chilled water generation through steam-driven systems was identified as an attractive secondary option for the site analyzed, due to potential for plant design simplification, while electricity generation could be considered as well to reduce electricity purchases for a wider range of site applications. For a campus with peak 60MW thermal power demand, a small nuclear reactor with similar thermal power rating would almost eliminate CO2 emissions from steam generation and reduce electricity imports for chilled water production. A preliminary techno-economic feasibility study shows that a small nuclear reactor design that is optimized to support process heat can represent an economically feasible option when compared with other decarbonization alternatives.

Stauff, Nicolas E.↗
DOE OSTI2025

Experiment to Investigate the On-set of Transient Fission Gas Release Under Simulated LOCA Conditions

Continuing efforts to better understand the phenomenon of transient fission gas release in irradiated commercial light water reactor fuel undergoing a simulated loss of coolant accident (LOCA) will be discussed in this work. During heating associated with LOCA conditions there is an additional release of fission gas beyond what is typically released during steady state operation. The exact timing of this release could impact the cladding balloon and rupture as the LOCA progresses in an actual accident. Recent experiments performed on the upgraded Severe Accident Test Station at Oak Ridge National Laboratory have expanded the current assessment of transient fission gas release. This system evaluates fission gas release by sweeping fission gas out of the LOCA test furnace and into cryogenically cooled cold traps where radioactive noble gas fission products are measured by gamma spectrometry. Additionally, the sweep gas can be monitored by a gas mass spectrometer to provide additional data on noble gas release and changes in the sweep gas atmosphere during heating. Several different conditions have been evaluated that explored the response of irradiated fuel to different thermal ramp conditions and different overpressure conditions. This further confirmed the impact of an overpressure in suppressing transient fission gas release. Further experiments are planned to evaluate the on-set temperature of transient fission gas release under a known overpressure. This test will progressively step through different temperature conditions while maintaining hydrostatic pressure on the fuel that is representative of high burnup fuel conditions. The available results from this type of testing will be discussed. Post-test microscopy will be compared to other transient fission gas release and standard LOCA tests to further understand the microstructural source of transient fission gas release.

Harp, Jason [ORNL] (ORCID:0000000253458440)↗
DOE OSTI2025

Demonstration of a tandem lens for producing shaped laser-ionized plasmas for plasma wakefield acceleration

We demonstrate a tandem lens optical setup, comprising two diffractive optics, that focuses a high-power ultrafast laser with a shaped on-axis intensity profile, producing a meter-long Bessel focus. The intended use of the optical setup is to produce a laser-ionized plasma source for plasma wakefield acceleration. By controlling the on-axis intensity, the density profile of the plasma ramps at the entrance and exit of the plasma can be tailored to optimize the matching of the electron beam into the plasma. In addition to demonstrating the optical system, we describe the algorithm used to calculate the lens phases and present detailed calculations of the lenses’ expected performance.

Ariniello, Robert [SLAC National Accelerator Labor↗
DOE OSTI2021

Integrated reference cavity with dual-mode optical thermometry for frequency correction

Photonic integrated resonators have advantages over traditional benchtop cavities in terms of size, weight, and cost with the potential to enable applications that require spectrally pure light. However, integrated resonators suffer from temperature-dependent frequency variations and are sensitive to external environmental perturbations, which hinders their usage in precision frequency applications. One solution is to use interrogation of the cavity temperature through dual-mode optical thermometry (DMOT) by measuring the shift of the resonance frequency difference between two polarization or optical frequency modes. Yet this approach has only been demonstrated in bulk-optic whispering gallery mode and fiber resonators. In this paper, we implement dual-mode optical thermometry in an ultra-high Q integrated silicon nitride resonator. A dual-mode resonance frequency difference temperature sensitivity of 188 ± <#comment/> 15 M H z / K is measured. We demonstrate feedforward DMOT frequency correction that, under an applied external temperature ramp, is able to reduce the optical frequency change to 0.31 kHz/s as compared to an uncorrected 10.03 kHz/s, a factor of 30 × <#comment/> reduction. These results show promise for on-chip frequency correction solutions for quantum, metrology, atomic, and coherent optical communications applications.

Zhao, Qiancheng (ORCID:0000000206968667)↗
DOE OSTI2022

HERO WEC V1.0 - WEC-Sim Detailed Simulation Runs and Summary Data

Data sets from simulation runs include 144 wave cases that were run based on the WEC-Sim model (https://mhkdr.openei.org/submissions/483). The 144 wave cases represent waves with the following wave height and wave period ranges: - Significant Wave Height: 0.25 - 4.0m in 0.25m increments - Wave Period: 5 - 13 sec in 1 sec increments Each run was simulated using a Pierson-Moskowitz irregular wave spectrum with a 200 second ramp time and a total simulation time of 2,200 seconds. Summary data set includes a spreadsheet and image files with matrices that are associated with data from simulation runs. All matrices cover the same significant wave height and wave periods from the sim runs, in the same increments. The following matrices are included: - Mechanical Power Input: Absorbed power calculated using linear input velocity at PTO (power take-off) multiplied by winch tension. - Mechanical Power Output: The hydraulic power calculated at the pump output prior to the pressure relief valve dump. - Feed Pressure: Average pressure at RO (reverse osmosis) input prior to pre-filters - RO Power Input: The hydraulic power calculated at the RO system inlet, accounts for flow loss due to pressure relief valve - Water Production: Average clean water flow at RO output

16 TIDAL AND WAVE POWER↗
DOE OSTI2024

HERO WEC V1.0 2024 - WEC-Sim Detailed Simulation Runs and Summary Data

This dataset includes results from simulations of NREL's hydraulic and electric reverse osmosis wave energy converter (HEREO WEC). Simulation runs include 135 wave cases that were based on the updated WEC-Sim model, which is linked below. The data represented in this repository is based on an updated WEC-Sim model using laboratory data to tune and refine the original WEC-Sim model for the V1.0 HERO WEC. The 135 wave cases represent waves with the following wave height and wave period ranges: - Significant Wave Height: 0.25 - 3.75m in 0.25m increments - Wave Period: 5 - 13 sec in 1 sec increments Each run was simulated using a Pierson-Moskowitz irregular wave spectrum with a 100 second ramp time, a total simulation time of 3,100 seconds, and a simulation time-step of 0.005s. A reference table has been included to map each multi condition run (MCR) case with each wave condition. Summary data set includes a spreadsheet and image files with matrices that are associated with data from simulation runs. All matrices cover the same significant wave height and wave periods from the simulation runs, in the same increments. The following matrices are included: - Power Abs: The average absorbed power from the WEC (calculated from anchor reaction force and heave velocity) - Power Hyd: The average hydraulic power output at pump (calculated from pump output flow and pressure) - Power - Hyd ROi: The average hydraulic power measured at the RO system inlet (calculated from RO system pressure and flow (pre-accumulator)) - Flow - Pump out: The average flowrate measured at the pump outlet - Flow - Perm: The average permeate (clean water) production - Flow - RO (pre): The average flowrate measured at the inlet of the RO system before the accumulators - Flow - RO (post): The average flowrate measured after the accumulator bank in the RO system - Pressure - RO: The average pressure measured at the inlet of the RO system This data set has been developed by the National Renewable Energy Laboratory, operated by the Alliance for Sustainable Energy, LLC, for the U.S. Department of Energy (DOE) under Contract No. DE-AC36-08GO28308. Funding provided by the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Water Power Technologies Office.

16 TIDAL AND WAVE POWER↗
DOE OSTI2025

2003 Interstate 595 Vehicle Trip-Length Study

# 2003 Interstate 595 Vehicle Trip-Length Study The 2003 Vehicle Trip-Length Study focused on Interstate 595 between Davie Road and University Drive in Florida. Survey participants answered questions about their trip's origin and destination—including the type of location such as work, home, store, etc.—the on- and off-ramps used, how many people were in the car, and the type of vehicle. The survey also collected household demographic data such as annual household income, available vehicles, the number of people living in their household, and the number of workers in their household above the age of 16. It also asked if they would use proposed bus-only lanes or train service along the corridor, if available. ## Data Collection Agency The survey was conducted by and for the Florida Department of Transportation. ## Survey Methodology The survey was conducted via mail and online in March 2003. ## Survey Records, Data, and Documentation Survey records include 7,917 participants. Origin and destination locations include street addresses, nearest intersections or landmarks, city, state, zip code, and latitude/longitude.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2003 Interstate 595 Vehicle Trip-Length Study

# 2003 Interstate 595 Vehicle Trip-Length Study The 2003 Vehicle Trip-Length Study focused on Interstate 595 between Davie Road and University Drive in Florida. Survey participants answered questions about their trip's origin and destination—including the type of location such as work, home, store, etc.—the on- and off-ramps used, how many people were in the car, and the type of vehicle. The survey also collected household demographic data such as annual household income, available vehicles, the number of people living in their household, and the number of workers in their household above the age of 16. It also asked if they would use proposed bus-only lanes or train service along the corridor, if available. ## Data Collection Agency The survey was conducted by and for the Florida Department of Transportation. ## Survey Methodology The survey was conducted via mail and online in March 2003. ## Survey Records, Data, and Documentation Survey records include 7,917 participants. Origin and destination locations include street addresses, nearest intersections or landmarks, city, state, zip code, and latitude/longitude.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2003 Interstate 595 Vehicle Trip-Length Study

# 2003 Interstate 595 Vehicle Trip-Length Study The 2003 Vehicle Trip-Length Study focused on Interstate 595 between Davie Road and University Drive in Florida. Survey participants answered questions about their trip's origin and destination—including the type of location such as work, home, store, etc.—the on- and off-ramps used, how many people were in the car, and the type of vehicle. The survey also collected household demographic data such as annual household income, available vehicles, the number of people living in their household, and the number of workers in their household above the age of 16. It also asked if they would use proposed bus-only lanes or train service along the corridor, if available. ## Data Collection Agency The survey was conducted by and for the Florida Department of Transportation. ## Survey Methodology The survey was conducted via mail and online in March 2003. ## Survey Records, Data, and Documentation Survey records include 7,917 participants. Origin and destination locations include street addresses, nearest intersections or landmarks, city, state, zip code, and latitude/longitude.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2003 Interstate 595 Vehicle Trip-Length Study

# 2003 Interstate 595 Vehicle Trip-Length Study The 2003 Vehicle Trip-Length Study focused on Interstate 595 between Davie Road and University Drive in Florida. Survey participants answered questions about their trip's origin and destination—including the type of location such as work, home, store, etc.—the on- and off-ramps used, how many people were in the car, and the type of vehicle. The survey also collected household demographic data such as annual household income, available vehicles, the number of people living in their household, and the number of workers in their household above the age of 16. It also asked if they would use proposed bus-only lanes or train service along the corridor, if available. ## Data Collection Agency The survey was conducted by and for the Florida Department of Transportation. ## Survey Methodology The survey was conducted via mail and online in March 2003. ## Survey Records, Data, and Documentation Survey records include 7,917 participants. Origin and destination locations include street addresses, nearest intersections or landmarks, city, state, zip code, and latitude/longitude.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2003 Interstate 595 Vehicle Trip-Length Study

# 2003 Interstate 595 Vehicle Trip-Length Study The 2003 Vehicle Trip-Length Study focused on Interstate 595 between Davie Road and University Drive in Florida. Survey participants answered questions about their trip's origin and destination—including the type of location such as work, home, store, etc.—the on- and off-ramps used, how many people were in the car, and the type of vehicle. The survey also collected household demographic data such as annual household income, available vehicles, the number of people living in their household, and the number of workers in their household above the age of 16. It also asked if they would use proposed bus-only lanes or train service along the corridor, if available. ## Data Collection Agency The survey was conducted by and for the Florida Department of Transportation. ## Survey Methodology The survey was conducted via mail and online in March 2003. ## Survey Records, Data, and Documentation Survey records include 7,917 participants. Origin and destination locations include street addresses, nearest intersections or landmarks, city, state, zip code, and latitude/longitude.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2003 Interstate 595 Vehicle Trip-Length Study

# 2003 Interstate 595 Vehicle Trip-Length Study The 2003 Vehicle Trip-Length Study focused on Interstate 595 between Davie Road and University Drive in Florida. Survey participants answered questions about their trip's origin and destination—including the type of location such as work, home, store, etc.—the on- and off-ramps used, how many people were in the car, and the type of vehicle. The survey also collected household demographic data such as annual household income, available vehicles, the number of people living in their household, and the number of workers in their household above the age of 16. It also asked if they would use proposed bus-only lanes or train service along the corridor, if available. ## Data Collection Agency The survey was conducted by and for the Florida Department of Transportation. ## Survey Methodology The survey was conducted via mail and online in March 2003. ## Survey Records, Data, and Documentation Survey records include 7,917 participants. Origin and destination locations include street addresses, nearest intersections or landmarks, city, state, zip code, and latitude/longitude.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2003 Interstate 595 Vehicle Trip-Length Study

# 2003 Interstate 595 Vehicle Trip-Length Study The 2003 Vehicle Trip-Length Study focused on Interstate 595 between Davie Road and University Drive in Florida. Survey participants answered questions about their trip's origin and destination—including the type of location such as work, home, store, etc.—the on- and off-ramps used, how many people were in the car, and the type of vehicle. The survey also collected household demographic data such as annual household income, available vehicles, the number of people living in their household, and the number of workers in their household above the age of 16. It also asked if they would use proposed bus-only lanes or train service along the corridor, if available. ## Data Collection Agency The survey was conducted by and for the Florida Department of Transportation. ## Survey Methodology The survey was conducted via mail and online in March 2003. ## Survey Records, Data, and Documentation Survey records include 7,917 participants. Origin and destination locations include street addresses, nearest intersections or landmarks, city, state, zip code, and latitude/longitude.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2003 Interstate 595 Vehicle Trip-Length Study

# 2003 Interstate 595 Vehicle Trip-Length Study The 2003 Vehicle Trip-Length Study focused on Interstate 595 between Davie Road and University Drive in Florida. Survey participants answered questions about their trip's origin and destination—including the type of location such as work, home, store, etc.—the on- and off-ramps used, how many people were in the car, and the type of vehicle. The survey also collected household demographic data such as annual household income, available vehicles, the number of people living in their household, and the number of workers in their household above the age of 16. It also asked if they would use proposed bus-only lanes or train service along the corridor, if available. ## Data Collection Agency The survey was conducted by and for the Florida Department of Transportation. ## Survey Methodology The survey was conducted via mail and online in March 2003. ## Survey Records, Data, and Documentation Survey records include 7,917 participants. Origin and destination locations include street addresses, nearest intersections or landmarks, city, state, zip code, and latitude/longitude.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2003 Interstate 595 Vehicle Trip-Length Study

# 2003 Interstate 595 Vehicle Trip-Length Study The 2003 Vehicle Trip-Length Study focused on Interstate 595 between Davie Road and University Drive in Florida. Survey participants answered questions about their trip's origin and destination—including the type of location such as work, home, store, etc.—the on- and off-ramps used, how many people were in the car, and the type of vehicle. The survey also collected household demographic data such as annual household income, available vehicles, the number of people living in their household, and the number of workers in their household above the age of 16. It also asked if they would use proposed bus-only lanes or train service along the corridor, if available. ## Data Collection Agency The survey was conducted by and for the Florida Department of Transportation. ## Survey Methodology The survey was conducted via mail and online in March 2003. ## Survey Records, Data, and Documentation Survey records include 7,917 participants. Origin and destination locations include street addresses, nearest intersections or landmarks, city, state, zip code, and latitude/longitude.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2003 Interstate 595 Vehicle Trip-Length Study

# 2003 Interstate 595 Vehicle Trip-Length Study The 2003 Vehicle Trip-Length Study focused on Interstate 595 between Davie Road and University Drive in Florida. Survey participants answered questions about their trip's origin and destination—including the type of location such as work, home, store, etc.—the on- and off-ramps used, how many people were in the car, and the type of vehicle. The survey also collected household demographic data such as annual household income, available vehicles, the number of people living in their household, and the number of workers in their household above the age of 16. It also asked if they would use proposed bus-only lanes or train service along the corridor, if available. ## Data Collection Agency The survey was conducted by and for the Florida Department of Transportation. ## Survey Methodology The survey was conducted via mail and online in March 2003. ## Survey Records, Data, and Documentation Survey records include 7,917 participants. Origin and destination locations include street addresses, nearest intersections or landmarks, city, state, zip code, and latitude/longitude.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗