Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nuclear shell model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

CISME report on experiments with HMX powder, PBX 9501 prills, and heated PBX 9501

The ability to predict post-ignition explosive response is relevant to explosives safety, particularly weapons assembly/disassembly operations that must operate under a sufficiently conservative safety basis to meet risk mitigation criteria for inadvertent nuclear detonation (IND). In particular, hazard determinations hinge on whether the PBX 9501 main charge can ultimately attain detonation from an initial, non-shock, ignition stimulus. The CISME experiment uses a spherical explosive charge, which is thermally ignited in the center using a fiber-delivered infrared laser pulse. This ignition mechanism - i.e. a localized thermal hotspot - is representative of the ignition-causing insults typical in accident scenarios, including low-velocity impact, drop, skid, and punch events. In fiscal year 2018 CISME experiments were conducted with pristine PBX 9501 spheres, confined and unconfined. Sub-detonative, low-violence reactions were observed. Here we report experiments conducted since 2018. The explosive charge was varied: experiments were conducted with room temperature pour-density HMX powder and prills of PBX 9501, and heated, thermally damaged PBX 9501. Experiments were conducted in a confined configuration, with two 4 mm-thick stainless-steel hemispherical shells bolted around the sphere. Detonation, via DDT (deflagration-to-detonation transition) was observed in the 3-inch diameter powdered HMX and the 6-inch diameter heated and thermally-damaged PBX 9501 tests. No transition to DDT was observed in smaller diameters for those configurations, and no DDT was observed for pour-density prills of PBX 9501 of any diameter. The original test series demonstrated that the response of pristine, undamaged PBX 9501 to a central ignition is relatively benign. This new test series shows that increased porosity, lack of polymer binders and thermal damage can greatly increase the violence of the post-ignition response, up to and including detonation. These results bridge the explosive response of PBX 9501 from sub-detonative through detonation as a function of diameter and provide valuable test cases for modeling efforts that strive to capture the DDT threshold. By exploring explosive response in a more representative 3D geometry, we can also benchmark these new results to more plentiful DDT datasets generated from testing in 1D tube confinement (the historical test configuration)–the configuration upon which almost all DDT models were developed.

42 ENGINEERING↗
DOE OSTI2017

Electronic Structure and Properties of Berkelium Iodates

The reaction of 249 Bk(OH) 4 with iodate under hydrothermal conditions results in the formation of Bk(IO 3 ) 3 as the major product with trace amounts of Bk(IO 3 ) 4 also crystallizing from the reaction mixture. The structure of Bk(IO 3 ) 3 consists of nine-coordinate Bk III cations that are bridged by iodate anions to yield layers that are isomorphous with those found for Am III , Cf III , and with lanthanides that possess similar ionic radii. Bk(IO 3 ) 4 was expected to adopt the same structure as M(IO 3 ) 4 (M = Ce, Np, Pu), but instead parallels the structural chemistry of the smaller Zr IV cation. Bk III –O and Bk IV –O bond lengths are shorter than anticipated and provide further support for a postcurium break in the actinide series. Photoluminescence and absorption spectra collected from single crystals of Bk(IO 3 ) 4 show evidence for doping with Bk III in these crystals. In addition to luminescence from Bk III in the Bk(IO 3 ) 4 crystals, a broad-band absorption feature is initially present that is similar to features observed in systems with intervalence charge transfer. However, the high-specific activity of 249 Bk ( t 1/2 = 320 d) causes oxidation of Bk III and only Bk IV is present after a few days with concomitant loss of both the BkIII luminescence and the broadband feature. The electronic structure of Bk(IO 3 ) 3 and Bk(IO 3 ) 4 were examined using a range of computational methods that include density functional theory both on clusters and on periodic structures, relativistic ab initio wave function calculations that incorporate spin–orbit coupling (CASSCF), and by a full-model Hamiltonian with spin–orbit coupling and Slater–Condon parameters (CONDON). Some of these methods provide evidence for an asymmetric ground state present in Bk IV that does not strictly adhere to Russel–Saunders coupling and Hund’s Rule even though it possesses a half-filled 5 f 7 shell. Multiple factors contribute to the asymmetry that include 5 f electrons being present in microstates that are not solely spin up, spin–orbit coupling induced mixing of low-lying excited states with the ground state, and covalency in the Bk IV –O bonds that distributes the 5f electrons onto the ligands. These factors are absent or diminished in other f 7 ions such as Gd III or Cm III .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Isomers and high-spin structures in the N = 81 isotones Xe 135 and Ba 137

In this study, the high-spin structures and isomers of the N=81 isotones 135 Xe and 137 Ba are investigated after multinucleon-transfer (MNT) and fusion-evaporation reactions. Both nuclei are populated (i) in 136 Xe + 238 U and (ii) 136 Xe+ 208 Pb MNT reactions employing the high-resolution Advanced Gamma Tracking Array (AGATA) coupled to the magnetic spectrometer PRISMA, (iii) in the 136 Xe+ 198 Pt MNT reaction employing the γ-ray array GAMMASPHERE in combination with the gas-detector array CHICO, and (iv) via a 11 B+ 130 Te fusion-evaporation reaction with the HORUS γ-ray array at the University of Cologne. The high-spin level schemesof 135 Xe and 137 Ba are considerably extended to higher energies. The 2058-keV (19/2 - ) state in 135 Xe is identified as an isomer, closing a gap in the systematics along the N=81 isotones. Its half-life is measured to be 9.0(9) ns, corresponding to a reduced transition probability of B(E2,19/2 - →15/2 - )=0.52(6) W.u. The experimentally deduced reduced transition probabilities of the isomeric states are compared to shell-model predictions. Finally, latest shell-model calculations reproduce the experimental findings generally well and provide guidance to the interpretation of the new levels.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Neutron-proton pairing correction in the extended isovector and isoscalar pairing model

An extended O ST (8) model with multi j-orbits is constructed based on the angular momentum decomposition with “pseudo”-spin S for valence nucleons in a j-orbit. It is shown that the isovector S = 0 and T=1 pairs are exactly the J=0 and T=1 pairs in a given j-orbit, while the isoscalar S = 1 pairs are linear combinations of J=odd pairs, with which the pairing Hamiltonian can be used to estimate isovector and isoscalar pairing interactions. As an example of the model application, some low-lying J = 0 + level energies of even-even and odd-odd A=18 – 28 nuclei up to the half-filling in the ds-shell above the 16 O core are fit by the model and compared with the fitting results of the same Hamiltonian in the O LST (8) form. It has been verified from the fitting of both the models that the isoscalar pairing interaction can be neglected in the lower energy part of the spectra of these ds-shell nuclei as far as binding energies and a few J=0 + excited levels of these nuclei are concerned. With the mean-field plus isovector pairing interaction only, neutron-neutron, proton-proton, and neutron-proton pairing contributions at the ground or the lowest J=0 + state of these nuclei are estimated. It is shown that the isovector np-pairing contribution to the binding in the odd-odd N=Z nuclei is systematically larger than that in the even-even nuclei. Furthermore, the isoscalar np-pair content at the lowest J=0+ state of these nuclei is also estimated. In both the O ST (8) and O LST (8) models, it is clearly shown that the isoscalar-pair content in the lowest J=0 + state of the N=Z and N=Z±2 nuclei increases with increasing of the valence nucleons, especially in those even-even nuclei, which indicates the isoscalar pairing correlation to be of importance at low-lying states of N=Z and N=Z±2 nuclei, especially in those even-even nuclei with more valence nucleons up to the half-filling, even though the isoscalar pairing interaction is negligible.

20 ≤ A ≤ 38↗
DOE OSTI2018

Hypernuclear no-core shell model

We extend the No-Core Shell Model (NCSM) methodology to incorporate strangeness degrees of freedom and apply it to single-Λ hypernuclei. After discussing the transformation of the hyperon-nucleon (YN) interaction into Harmonic-Oscillator (HO) basis and the Similarity Renormalization Group transformation applied to it to improve model-space convergence, we introduce two complementary formulations of the NCSM, one that uses relative Jacobi coordinates and symmetry-adapted basis states to fully exploit the symmetries of the hypernuclear Hamiltonian, and one working in a Slater determinant basis of HO states where antisymmetrization and computation of matrix elements is simple and to which an importance-truncation scheme can be applied. For the Jacobi-coordinate formulation, we give an iterative procedure for the construction of the antisymmetric basis for arbitrary particle number and present the formulae used to embed two- and three-baryon interactions into the many-body space. For the Slater-determinant formulation, we report on the conversion of the YN interaction matrix elements from relative to single-particle coordinates, the importance-truncation scheme that tailors the model space to the description of the low-lying spectrum, and the role of the redundant center-of-mass degrees of freedom. We end with a confirmation of both formulations in the four-body system, giving converged ground-state energies for a chiral Hamiltonian, and present a short survey of the A ≤ 7 hyper-helium isotopes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2019

Novel Zoned Waste-forms for High-Priority Radionuclide Waste Streams

This report describes the potential of a novel class of materials—α-ZrW 2 O 8 , Zr 2 WP 2 O 12 , and related compounds that contract upon amorphization as possible radionuclide waste-forms. The proposed ceramic waste-forms would consist of zoned grains, or sintered ceramics with center- loaded radionuclides and barren shells. Radiation-induced amorphization would result in core shrinkage but would not fracture the shells or overgrowths, maintaining isolation of the radionuclide. In this report, we have described synthesis techniques to produce phase-pure forms of the materials, and how to fully densify those materials. Structural models for the materials were developed and validated using DFPT approaches, and radionuclide substitution was evaluated; U(IV), Pu(IV), Tc(IV) and Tc(VII) all readily substitute into the material structures. MD modeling indicated that strain associated with radiation-induced amorphization would not affect the integrity of surrounding crystalline materials, and these results were validated via ion beam experimental studies. Finally, we have evaluated the leach rates of the barren materials, as determined by batch and flow-through reactor experiments. ZrW 2 O 8 leaches rapidly, releasing tungstate while Zr is retained as a solid oxide or hydroxide. Tungsten release rates remain elevated over time and are highly sensitive to contact times, suggesting that this material will not be an effective waste-form. Conversely, tungsten releases rates from Zr 2 WP 2 O 12 rapidly drop, show little dependence on short-term changes in fluid contact time, and in over time, become tied to P release rates. The results presented here suggest that this material may be a viable waste-form for some hard-to-handle radionuclides such as Pu and Tc.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2016

Remarks on the fission barriers of super-heavy nuclei

Shell-correction energies of super-heavy nuclei are approximated by using QαQα values of measured decay chains. Five decay chains were analyzed, which start at the isotopes 285 Fl, 294 118, 291 Lv, 292 Lv and 293 Lv. The data are compared with predictions of macroscopic-microscopic models. Fission barriers are estimated that can be used to eliminate uncertainties in partial fission half-lives and in calculations of evaporation-residue cross-sections. In that calculations, fission probability of the compound nucleus is a major factor contributing to the total cross-section. The data also provide constraints on the cross-sections of capture and quasi-fission in the entrance channel of the fusion reaction. Here, arguments are presented that fusion reactions for synthesis of isotopes of elements 118 and 120 may have higher cross-sections than assumed so far.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Chiral-like doublet band structure and octupole correlations in 104 Ag

The nature of the yrast negative-parity band and its chiral-like partner band in 104 Ag is investigated experimentally and theoretically. Lifetimes of states in the negative-parity yrast band and positive-parity band based on the 4424-keV level are measured using Doppler shift attenuation technique. Lifetimes of three more states have been determined along with the upper limit for the lifetime of the highest observed yrast states. Further, lifetimes known from earlier studies are determined with better precision. The level scheme of 104 Ag has also been extended with the addition of new enhanced E1 transitions linking the positive-parity band based on the 4424-keV levels and the yrast negative-parity and its partner band. B(E1) and/or B(E1)/B(M1) values for the transitions from the positive-parity band to the yrast and its partner band have been determined for the first time; these suggest strong octupole correlation between the positive-parity and the negative-parity bands. Here, calculations based on the triaxial projected shell model (TPSM) and covariant density functional theory (CDFT) have been performed to unravel the intrinsic structures of the partner band and the excited positive-parity band. TPSM calculations predict that doublet bands have significant angular momentum contributions along the three principle axes, suggesting that bands could have chiral symmetry breaking origin. The CDFT calculations predict a π(g 9/2 ) -1 Ⓧν(h 11/2 )(g 7/2 ,d 5/2 ) 2 aligned quasiparticle configuration for the negative-parity doublet bands with deformation parameters β≈0.20 and γ≈5°. The partner band could be interpreted as a chiral vibration mode built on top of the yrast band. The excited positive-parity band is predicted to have aligned four quasiparticle configurations, namely, π(g 9/2 ) -1 Ⓧν(h 11/2 ) 2 (g 7/2 ,d 5/2 ) 1 . Further, these calculations predict significant octupole softness in 104 Ag which could be the reason for enhanced E1 transitions between the four quasiparticle positive-parity bands and the doublet negative-parity bands.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Feasibility Study for Cathodic Protection of Waste Tanks at Hanford

The Hanford Nuclear Reservation site contains approximately 211 million liters of radioactive and chemically hazardous waste arising from nuclear weapons production, beginning with World War II, and continuing through the Cold War. The waste is stored in 177 carbon-steel underground storage tanks, of which 149 are single-shell tanks (SSTs) and the remaining are double-shell tanks (DSTs). The mission of an ongoing River Protection Project is to retrieve the waste from the underground storage tanks and then treat and immobilize (i.e., vitrify) it for disposal. Waste from the older SSTs is being progressively retrieved into the newer DSTs for storage pending treatment, immobilization, and disposal. Waste chemistry controls are in place to mitigate general corrosion, pitting corrosion, and stress corrosion cracking (SCC) and minimize corrosion risks to the carbon steel tank liners of DST at the Hanford Site. The chemistry control program focuses on preserving liner integrity while balancing the need for caustic/nitrite additions that have large downstream impacts on vitrification. Some of the DSTs store salt cake or sludge waste layers contain out-of-specification interstitial liquids that contact the primary tank bottom or sidewall. Remediation of such layers through chemical additions is not practical. At the present time, the most significant leak integrity concern at Hanford is for corrosion of the tank bottoms of DSTs where the solids layer is out of specification because of hydroxide ion depletion and consequently, pH values that are less than 12. Cathodic protection (CP) has been proposed as a possible way to protect the liners of such tanks against corrosion. The objective of this project was to investigate the feasibility of applying CP to Hanford DSTs to mitigate internal corrosion of the carbon steel tank primary liners. The scope of the project included (1) a literature review on the application of CP to storage tank systems, in general, and to waste tanks at the Savannah River Site (SRS) and Hanford, (2) a review of the finite element analysis (FEA) model recently developed to evaluate potentials for a DST, and (3) the development of a boundary element analysis (BEA) model for CP for a DST. Tank AN-107, one of the Hanford DSTs, was selected for this work because (1) the bottommost waste layer in the tank is out-of-specification, and (2) electrochemical and resistivity data, based on recent waste sampling and testing, are available for this tank. The overarching conclusion of this study is that, based on the available information, it is feasible to apply CP to mitigate internal corrosion of the primary liners of the Hanford DSTs. However, significant additional information and work are required before a CP system can be designed. Recommendations for next steps in the design of the CP system will be presented.

WIERSMA, BRUCE↗
DOE OSTI2018

Wavelength-detuning cross-beam energy transfer mitigation scheme for direct drive: Modeling and evidence from National Ignition Facility implosions

Here, cross-beam energy transfer (CBET) results from two-beam energy exchange via seeded stimulated Brillouin scattering, which detrimentally reduces laser-energy absorption for direct-drive inertial confinement fusion. Consequently, ablation pressure and implosion velocity suffer from the decreased absorption, reducing target performance in both symmetric and polar direct drive. Additionally, CBET alters the time-resolved scattered-light spectra and redistributes absorbed and scattered-light–changing shell morphology and low-mode drive symmetry. Mitigating CBET is demonstrated in inertial confinement implosions at the National Ignition Facility by detuning the laser-source wavelengths (±2.3 Å UV) of the interacting beams. In polar direct drive, wavelength detuning was shown to increase the equatorial region velocity experimentally by 16% and to alter the in-flight shell morphology. These experimental observations are consistent with design predictions of radiation–hydrodynamic simulations that indicate a 10% increase in the average ablation pressure. These results indicate that wavelength detuning successfully mitigates CBET. Simulations predict that optimized phase plates and wavelength-detuning CBET mitigation utilizing the three-legged beam layout of the OMEGA Laser System significantly increase absorption and achieve >100-Gbar hot-spot pressures in symmetric direct drive.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Advanced Reaction System Program: Materials for ARS Reaction Chambers (FY18 Milestone, Subtask 3.3)

The objective of this effort is to identify materials and manufacturing technology that will allow the rapid construction and evaluation of computer modeled advanced reactor system designs to process specific carbon feedstock materials. Before full scale reaction systems can be built, prototypes need to be constructed and operated to validate the proposed new system performance against target criteria. The first steps, however, are to understand what type of materials are needed that can withstand the targeted process environments and determine how structures using those materials can be built. A wide range of reaction vessel conditions may exist in the processes being considered that could involve temperatures up to 1200°C, abrasive materials (high velocity coal and coal ash), different carbon feedstock materials (coal, biomass, and process wastes such as petcoke), corrosive and oxidizing/reducing gases, different material phases (solid, liquid, and gas), cyclic temperatures, microwave energy, customized vessel construction material needs (process stability, cost, weight, and compatibility with other materials), along with other known/unknown variables – all of which must be considered in selecting materials and considering manufacturing processes. The current focus of the research is to develop a reaction vessel sidewall structure consisting of a metal outer support and an inner ceramic (or cermet) protective surface. Ceramic coatings are desired because of their good corrosion and wear resistance, and because they are the material of choice to reduce metal shell temperature in high temperature processes. However significant property mismatches between metals and ceramics have been a roadblock to the joining of metals and ceramics.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2016

Time history prediction of direct-drive implosions on the Omega facility

We present in this article direct-drive experiments that were carried out on the Omega facility [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)]. Two different pulse shapes were tested in order to vary the implosion stability of the same target whose parameters, dimensions and composition, remained the same. The direct-drive configuration on the Omega facility allows the accurate time-resolved measurement of the scattered light. We show that, provided the laser coupling is well controlled, the implosion time history, assessed by the “bang-time” and the shell trajectory measurements, can be predicted. This conclusion is independent on the pulse shape. In contrast, we show that the pulse shape affects the implosion stability, assessed by comparing the target performances between prediction and measurement. For the 1-ns square pulse, the measured neutron number is about 80% of the prediction. For the 2-step 2-ns pulse, we test here that this ratio falls to about 20%.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2019

Strong one-neutron emission from two-neutron unbound states in β decays of the r -process nuclei Ga 86 , 87

β-delayed one-neutron and two-neutron branching ratios (P$_{1n}$ and P$_{2n}$) have been measured in the decay of A = 84 to 87 Ga isotopes at the Radioactive-Isotope Beam Factory (RIBF) at the RIKEN Nishina Center using a high-efficiency array of 3 He neutron counters (BRIKEN). Two-neutron emission was observed in the decay of 84, 85, 87 Ga for the first time and the branching ratios were measured to be P$_{2n}$ = 1.6 (2)%, 1.3 (2)%, and 10.2 ( 28 ) stat ( 5 ) sys %, respectively. One-neutron branching ratio of 87 Ga (P$_{1n}$= 81 (9) stat (8) sys %) and half-life of 29(4) ms were measured for the first time. The branching ratios of 86 Ga were also measured to be P$_{1n}$ = 74 (2) stat (8) sys % and 16.2 (9) stat ( 6 ) sys % with better precision than a previous study. The observation that P$_{1n}$ > P$_{2n}$ for both 86,87 Ga was unexpected and is interpreted as a signature of dominating one-neutron emission from the two-neutron unbound excited states in 86, 87 Ge. In order to interpret the experimental results, shell-model and Hauser-Feshbach statistical model calculations of delayed particle and γ-ray emission probabilities were performed. This model framework reproduces the experimental results. The shell model alone predicts P$_{2n}$ significantly larger than P$_{1n}$ for the 87 Ga decay, and it is necessary to invoke a statistical description to successfully explain the observation that P$_{1n}$ > P$_{2n}$. Our new results demonstrate the relevance and importance of a statistical description of neutron emission for the prediction of the decay properties of multineutron emitters and that it must be included in the r -process modeling.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2016

Off-shell amplitudes as boundary integrals of analytically continued Wilson line slope

We consider a conformal complex singlet extension of the Standard Model with a Higgs portal interaction. The global U(1) symmetry of the complex singlet can be either broken or unbroken and we study each scenario. In the unbroken case, the global U(1) symmetry protects the complex singlet from decaying, leading to an ideal cold dark matter candidate with approximately 100 GeV mass along with a significant proportion of thermal relic dark matter abundance. In the broken case, we have developed a renormalization-scale optimization technique to significantly narrow the parameter space and in some situations, provide unique predictions for all the model’s couplings and masses. We have found there exists a second Higgs boson with a mass of approximately 550 GeV that mixes with the known 125 GeV Higgs with a large mixing angle sin θ ≈ 0.47 consistent with current experimental limits. The imaginary part of the complex singlet in the broken case could provide axion dark matter for a wide range of models. Upon including interactions of the complex scalar with an additional vector-like fermion, we explore the possibility of a diphoton excess in both the unbroken and the broken cases. In the unbroken case, the model can provide a natural explanation for diphoton excess if extra terms are introduced providing extra contributions to the singlet mass. In the broken case, we find a set of coupling solutions that yield a second Higgs boson of mass 720 GeV and an 830 GeV extra vector-like fermion F , which is able to address the 750 GeV LHC diphoton excess. We also provide criteria to determine the symmetry breaking pattern in both the Higgs and hidden sectors.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2016

Low Adsorption of Magnetite Nanoparticles with Uniform Polyelectrolyte Coatings in Concentrated Brine on Model Silica and Sandstone

In subsurface imaging and oil recovery where temperatures and salinities are high, it is challenging to design polymer-coated nanoparticles with low retention (high mobility) in porous rock. Herein, the grafting of poly(2-acrylamido-2-methyl-1-propanesulfonic acid-$co$-acrylic acid) (poly(AMPS-$co$-AA)) on magnetic iron oxide nanoparticles was sufficiently uniform to achieve low adsorption on model colloidal silica and crushed Berea sandstone in highly concentrated API brine (8% NaCl and 2% CaCl 2 by weight). The polymer shell was grafted via amide bonds to an aminosilica layer, which was grown on silica-coated magnetite nanoparticles. The particles were found to be stable against aggregation in American Petroleum Institute (API) brine at 90 °C for 24 h. For IO nanoparticles with ~23% polymer content, Langmuir adsorption capacities on colloidal silica and crushed Berea Sandstone in batch experiments were extremely low at only 0.07 and 0.09 mg of IO/m 2 , respectively. Furthermore, upon injection of a 2.5 mg/mL IO suspension in API brine in a column packed with crushed Berea sandstone, the dynamic adsorption of IO nanoparticles was only 0.05 ± 0.01 mg/m 2 , which is consistent with the batch experiment results. The uniformity and high concentration of solvated poly(AMPS-$co$-AA) chains on the IO surfaces provided electrosteric stabilization of the nanoparticle dispersions and also weakened the interactions of the nanoparticles with negatively charged silica and sandstone surfaces despite the very large salinities.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Energy dependence of $\textit{p}$ + 232 Th fission mass distributions: Mass-asymmetric standard I and standard II modes, and multichance fission

Background: The predominant mass-asymmetric fission of actinide nuclides occurs mainly through the so-called standard I and standard II modes. Though understood to be caused by shape-dependent shell structures encountered between the fission barrier deformation and scission, the most relevant shell gaps are still not firmly established. The standard I mode had been associated with the spherical doubly magic 132 Sn, and thus the $\textit{Z}$ = 50 proton shell, but recently it has been proposed that standard I and standard II are associated with quadrupole and octupole deformed gaps at $\textit{Z}$ = 52 and 56, respectively. Purpose: In this work, we investigate how the relative probabilities of the standard I and standard II modes vary with excitation energy near threshold, probing where the two modes bifurcate. Methods: The Australian National University Heavy Ion Accelerator Facility and CUBE fission spectrometer have been used to measure fission mass distributions for the $\textit{p}$ + 232 Th reaction (forming 233 Pa) at closely spaced bombarding energy intervals from 6.5 to 28 MeV. Results: A model-independent analysis of the energy dependence of the shape of the mass-asymmetric peak shows a strong dependence of the standard I and standard II relative probability on excitation energy near threshold. Conclusions: The results are consistent with the standard II mode having a lower fission barrier than standard I in 233 Pa, with the latter increasing continually in relative probability above its barrier energy. It is concluded that multichance fission, in particular last chance fission, plays a strong role in determining the observed energy dependence of all fission modes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Structure of high-lying excited states in 47 Ca with ℓ ≥ 3 populated in fast-beam 𝛾-ray-tagged one-neutron pickup reactions

Located just one neutron removed from doubly magic, stable 48 Ca, the adjacent isotope 47 Ca has been studied extensively with neutron-removing transfer reactions and interpreted within a shell-model picture. Neutron-adding transfer reactions onto the stable 46 Ca, however, have not been performed in nearly 60 years and never with the aid of high-resolution 𝛾-ray spectroscopy. Here, we report on the 12 C⁡( 46 , Ca 47 Ca+𝛾)⁢𝑋 one-neutron pickup reaction from 12 C onto 46 Ca at more than 50 MeV/nucleon, a regime of orbital angular momentum mismatch that selectively populates 47 Ca final states based on ℓ ≥ 3 neutron configurations. Newly observed excited states and 𝛾-ray transitions are discussed in comparison to 𝑓⁡𝑝 shell-model calculations in a variety of configuration spaces. Furthermore, it is shown that the nature of the observed spectrum of final states can be well interpreted, albeit with a significant fragmentation of the 𝜈⁢0⁢𝑓 5/2 strength observed in the measurement that is not borne out in the structure calculations.

39 ≤ A ≤ 58↗